search for: b1pci

...pport, in my kernel, 2.4.18 (Debian stable). When I make a capiinit, to test the AVM card, it says, debian-asterisk:~# capiinit modprobe: Can't locate module capifs modprobe: Can't locate module capifs WARNING: filesystem capifs not available /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: insmod /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o failed /lib/modules/2.4.18/kernel/drivers/is...

...API support ii libcapi20-dev 3.9.20060704-1 libraries for CAPI support ii avm-fritz-firmware-2.6.17-10 3.11+2.6.17.7-10.1 Firmware for AVM Fritz! ISDN hardware* and downloaded firmaware from * ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/ .*My capi.conf is: *b1pci /usr/share/isdn/b1.t4 DSS1 - - - - P2P* Then I exec command capiinit start, I have noting on output, but it load modules: *root@asterisk:~# lsmod Module Size Used by b1pci 10624 0 b1dma 17412 1 b1pci b1...

Hello, I'm trying to install CAPI Driver for Suse 9.2 and I found the documentation for this pretty old since It refers to Suse 8.2 ( http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install ). This is especially apparent when I look at the section of these instructions for altering "src.drv/makefile" to replace the occurance of "CARD_PATH". I tried to

...20000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS lsmod: Module Size Used by fcpci 500632 1 c4 20317 0 b1pci 10445 0 b1dma 17261 1 b1pci b1 25549 3 c4,b1pci,b1dma capi 17281 4 kernelcapi 44385 6 fcpci,c4,b1pci,b1dma,b1,capi slhc 7105 1 ppp_generic capifs 5961 2 capi -------------...

...0 13:49:30 CET 2004 > CPU0 > 0: 4270237 XT-PIC timer > 1: 44 XT-PIC i8042 > 2: 0 XT-PIC cascade > 5: 32813694 XT-PIC zaphfc > 8: 2 XT-PIC rtc > 10: 16843 XT-PIC b1pci-b000 > 11: 16563 XT-PIC uhci_hcd, uhci_hcd, CMI8738, eth0 > 14: 1822 XT-PIC ide0 > 15: 17 XT-PIC ide1 > NMI: 0 > LOC: 0 > ERR: 0 > MIS: 0 > Sat Nov 20 13:49:40 CET 2004 > CP...

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io...

...d / Retrieve Terminal Portability Call Forwarding Call Deflection OUTPUT of etc/CAPI.conf ------------------- [root@cripbx etc]# cat /etc/capi.conf # card file proto io irq mem cardnr options #b1isa b1.t4 DSS1 0x150 7 - - P2P b1pci b1.t4 DSS1 - - - - c4 c4.bin DSS1 - - - - c4 - DSS1 - - - - c4 - DSS1 - - - - P2P c4 - DSS1 - - - -...

...the important config files? Sorry if I should have included something else too, but let me know and I'll provide it! Steve My capi.conf is as follows: # card file proto io irq mem cardnr options #b1isa b1.t4 DSS1 0x150 7 - - P2P b1pci b1.t4 DSS1 - - - - c4 c4.bin DSS1 - - - - c4 - DSS1 - - - - c4 - DSS1 - - - - P2P c4 - DSS1 - - - -...

Hallo all, I am trying to get * with chan_capi and a ptp-ISDN with 4 lines on a AVM C4 card to work. But weather inbound nor outbound is working :( My capi.conf: ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=8993 incomingmsn=* mode=immediate controller=1,2,3,4 softdtmf=1 ;accountcode= context=demo

...=============================== s,1,Dial,CAPI/523065:b${EXTEN}|30 s,1,Dial,CAPI/523065:${EXTEN}|30|r Here's my /etc/isdn/capi.conf ===================== # card file proto io irq mem cardnr options #b1isa b1.t4 DSS1 0x150 7 - - P2P b1pci b1.t4 DSS1 - - - - c4 c4.bin DSS1 - - - - c4 - DSS1 - - - - c4 - DSS1 - - - - P2P c4 - DSS1 - - - -...

Hi, I recently subscribed to xen-users asking about a powernow-k8 problem, but in the meantime I am not sure if the users-list was the right place for it. So I decided to repeat my question here ;-) My current config is attached. --- snip --- Hi, I recently installed Xen on my AMD64 for my first time and so far, everything seems to work pretty fine. :-) I tried to enable cpu frequency