David Luong
2004-Aug-26 14:35 UTC
[Asterisk-Users] Newbie needs help - Dev_Kit_Lite installation problem
Installing DevkitLite hardware (Very similar to John Lange's post on Tue
Oct 08 2002)
I cannot get anything to work on the phone connected to the s100u. I dont
know what to do.
Can someone please help me?
I used the sample configuration files from digium documentaion that was
supposed to be "sane" defaults for the kit.
Very similar to John Lange's post on Tue Oct 08 2002
Here is my probelm:
This is what i did.
unplugged s100u
rmmod wcfxo
rmmod wcusb
rmmod zaptel
replugged s100u
modprobe wcfxo
modprobe wcusb
ztcfg -vv
asterisk -cv
This is what I got:
[root@localhost root]# modprobe wcfxo
ZT_CHANCONFIG failed on channel 2: No such device or address (6)
/lib/modules/2.4.20-8/misc/wcfxo.o: post-install wcfxo failed
/lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed
[root@localhost root]# modprobe wcusb
[root@localhost root]# ztcfg -vv
Zaptel Configuration
=====================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
2 channels configured.
ZT_CHANCONFIG failed on channel 2: No such device or address (6)
[root@localhost root]# asterisk -cv
Asterisk CVS-HEAD-08/24/04-09:05:32, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com>
========================================================================Asterisk
Event Logger Started /var/log/asterisk/event_log
Asterisk PBX Core Initializing
Registering builtin applications:
[AbsoluteTimeout]
[Answer]
[BackGround]
[Busy]
[Congestion]
[DigitTimeout]
[Goto]
[GotoIf]
[GotoIfTime]
[Hangup]
[NoOp]
[Prefix]
[Progress]
[ResetCDR]
[ResponseTimeout]
[Ringing]
[SayNumber]
[SayDigits]
[SayAlpha]
[SayPhonetic]
[SetAccount]
[SetAMAFlags]
[SetGlobalVar]
[SetLanguage]
[SetVar]
[StripMSD]
[Suffix]
[Wait]
[WaitExten]
Asterisk Dynamic Loader Starting:
[chan_modem.so] => (Generic Voice Modem Driver)
=> (A/Open (Rockwell Chipset) ITU-2 VoiceModem Driver)
[res_musiconhold.so] => (Music On Hold Resource)
[res_adsi.so] => (ADSI Resource)
[res_features.so] => (Call Parking Resource)
[res_crypto.so] => (Cryptographic Digital Signatures)
[res_indications.so] => (Indications Configuration)
[res_monitor.so] => (Call Monitoring Resource)
[res_agi.so] => (Asterisk Gateway Interface (AGI))
[chan_sip.so] -z: No such file or directory
=> (Session Initiation Protocol (SIP))
[chan_modem_bestdata.so] => (BestData (Conexant V.90 Chipset) VoiceModem
Driver)
[chan_modem_i4l.so] => (ISDN4Linux Emulated Modem Driver)
[chan_agent.so] => (Agent Proxy Channel)
[chan_mgcp.so] => (Media Gateway Control Protocol (MGCP))
[chan_iax2.so] => (Inter Asterisk eXchange (Ver 2))
[chan_local.so] => (Local Proxy Channel)
[chan_skinny.so] => (Skinny Client Control Protocol (Skinny))
Aug 26 15:12:15 WARNING[1076220544]: chan_skinny.c:2584 reload_config:
Unable to get our IP address,
Skinny disabled
[chan_oss.so] => (OSS Console Channel Driver)
Aug 26 15:12:15 WARNING[1076220544]: chan_oss.c:992 load_module: XXX I
don't work right with non-full duplex sound cards XXX
Aug 26 15:12:15 WARNING[1097410752]: chan_oss.c:239 sound_thread: Read
error on sound device: Resource temporarily unavailable
[chan_phone.so] => (Linux Telephony API Support)
[chan_zap.so] => (Zapata Telephony w/PRI)
Aug 26 15:12:16 WARNING[1076220544]: chan_zap.c:721 zt_open: Unable to
specify channel 2: Device or resource busy
Aug 26 15:12:16 ERROR[1076220544]: chan_zap.c:5869 mkintf: Unable to open
channel 2: Device or resource busy
here = 0, tmp->channel = 2, channel = 2
Aug 26 15:12:16 ERROR[1076220544]: chan_zap.c:8776 setup_zap: Unable to
register channel '2'
Aug 26 15:12:16 WARNING[1076220544]: loader.c:328 ast_load_resource:
chan_zap.so: load_module failed, returning -1
-- Unregistered channel 1
Aug 26 15:12:16 WARNING[1076220544]: loader.c:423 load_modules: Loading
module chan_zap.so failed!
A "ps" shows that asterisk didn't start. And there is still no
dialtone
from the phone on the s100u. I dont' know what to do. My x100p is
plugged into a open pci slot with the phone line from the wall into the
"wall" jack, and a normal cheapo storebought phone connected to the
phone
slot. I have my s100u plugged in and nother cheapo phone connected to
that as well.
I get a dialtone from my phone connected to my x100p with or without
asterisk(I can call out and received calls like as if it was plugged
straight into the wall and not through the x100p)
I'm running Redhat9.0 on a P2 300Mhz emachine
some more details:
lsmod gives me:
[root@localhost root]# lsmod
Module Size Used by Not tainted
wcusb 20064 0 (unused)
wcfxo 9376 0 (unused)
zaptel 178080 0 [wcusb wcfxo]
cs46xx 62832 0 (autoclean)
ac97_codec 13640 0 (autoclean) [cs46xx]
parport_pc 19076 1 (autoclean)
lp 8996 0 (autoclean)
parport 37056 1 (autoclean) [parport_pc lp]
autofs 13268 0 (autoclean) (unused)
tulip 43840 1
sg 36524 0 (autoclean)
sr_mod 18136 0 (autoclean)
ide-scsi 12208 0
scsi_mod 107160 3 [sg sr_mod ide-scsi]
ide-cd 35708 0
cdrom 33728 0 [sr_mod ide-cd]
audio 46648 0 (unused)
soundcore 6404 4 [cs46xx audio]
keybdev 2944 0 (unused)
mousedev 5492 1
hid 22148 0 (unused)
input 5856 0 [keybdev mousedev hid]
usb-uhci 26348 0 (unused)
usbcore 78784 1 [wcusb audio hid usb-uhci]
ext3 70784 2
jbd 51892 2 [ext3]
my /etc/zaptel.conf is as follows:
fxsks=1
fxoks=2
loadzone = us
defaultzone=us
my /etc/asterisk/zapata.conf is(not including edited out lines):
[channels]
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
rxgain=0.0
txgain=0.0
group=1
immediate=no
context=bell
signalling=fxs_ks
channel=1
context=home
signalling=fxo_ks
channel=2
I emailed support@digium and they told me to switch chanel 1 and channel 2
in zaptel.conf. and to change the fxo_ks and fxs_ks in zapata.conf. and
then doing the modprobes with wcusb first. also didn't work. And besides
I read that it's better to have the x100p as channel 1 and the usb for
channel 2.
Anyways I thank anybody and everybody that took the time and even
considered helping a Asterisk Newbie
Dave
Dan Long
2004-Aug-26 16:29 UTC
[Asterisk-Users] Newbie needs help - Dev_Kit_Lite installationproblem
----- Original Message ----- From: "David Luong" <david.luong@embedia.com> To: <Asterisk-Users@lists.digium.com> Sent: Thursday, August 26, 2004 2:35 PM Subject: [Asterisk-Users] Newbie needs help - Dev_Kit_Lite installationproblem> Installing DevkitLite hardware (Very similar to John Lange's post on Tue > Oct 08 2002) > > I cannot get anything to work on the phone connected to the s100u. I dont > know what to do. > Can someone please help me?I too had the DevKitLite hardware. Had nothing but problems with it. Is difficult to get running and when you do get it going, I think you will find that you may have trouble getting it to dial correctly. After getting it running, I would pick up the phone to make a call and I would get a dial tone but the S100U would not accept the DTMF tones for dialing. The only thing I could do to correct this would be to down * and reboot the computer. Finally I stopped using it and bought a one port TDM400U. It works with no problems.> > I used the sample configuration files from digium documentaion that was > supposed to be "sane" defaults for the kit. > > Very similar to John Lange's post on Tue Oct 08 2002 > Here is my probelm: > This is what i did. > unplugged s100u > rmmod wcfxo > rmmod wcusb > rmmod zaptel > replugged s100u > modprobe wcfxo > modprobe wcusb > ztcfg -vv > asterisk -cv > This is what I got: > > [root@localhost root]# modprobe wcfxo > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > /lib/modules/2.4.20-8/misc/wcfxo.o: post-install wcfxo failed > /lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed > [root@localhost root]# modprobe wcusb > [root@localhost root]# ztcfg -vv > > Zaptel Configuration > =====================> > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > > 2 channels configured. > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > [root@localhost root]# asterisk -cv > Asterisk CVS-HEAD-08/24/04-09:05:32, Copyright (C) 1999-2004 Digium. > Written by Mark Spencer <markster@digium.com> > ========================================================================> Asterisk Event Logger Started /var/log/asterisk/event_log > Asterisk PBX Core Initializing > Registering builtin applications: > [AbsoluteTimeout] > [Answer] > [BackGround] > [Busy] > [Congestion] > [DigitTimeout] > [Goto] > [GotoIf] > [GotoIfTime] > [Hangup] > [NoOp] > [Prefix] > [Progress] > [ResetCDR] > [ResponseTimeout] > [Ringing] > [SayNumber] > [SayDigits] > [SayAlpha] > [SayPhonetic] > [SetAccount] > [SetAMAFlags] > [SetGlobalVar] > [SetLanguage] > [SetVar] > [StripMSD] > [Suffix] > [Wait] > [WaitExten] > Asterisk Dynamic Loader Starting: > [chan_modem.so] => (Generic Voice Modem Driver) > => (A/Open (Rockwell Chipset) ITU-2 VoiceModem Driver) > [res_musiconhold.so] => (Music On Hold Resource) > [res_adsi.so] => (ADSI Resource) > [res_features.so] => (Call Parking Resource) > [res_crypto.so] => (Cryptographic Digital Signatures) > [res_indications.so] => (Indications Configuration) > [res_monitor.so] => (Call Monitoring Resource) > [res_agi.so] => (Asterisk Gateway Interface (AGI)) > [chan_sip.so] -z: No such file or directory > => (Session Initiation Protocol (SIP)) > [chan_modem_bestdata.so] => (BestData (Conexant V.90 Chipset) VoiceModem > Driver) > [chan_modem_i4l.so] => (ISDN4Linux Emulated Modem Driver) > [chan_agent.so] => (Agent Proxy Channel) > [chan_mgcp.so] => (Media Gateway Control Protocol (MGCP)) > [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2)) > [chan_local.so] => (Local Proxy Channel) > [chan_skinny.so] => (Skinny Client Control Protocol (Skinny)) > Aug 26 15:12:15 WARNING[1076220544]: chan_skinny.c:2584 reload_config: > Unable to get our IP address, > Skinny disabled > [chan_oss.so] => (OSS Console Channel Driver) > Aug 26 15:12:15 WARNING[1076220544]: chan_oss.c:992 load_module: XXX I > don't work right with non-full duplex sound cards XXX > Aug 26 15:12:15 WARNING[1097410752]: chan_oss.c:239 sound_thread: Read > error on sound device: Resource temporarily unavailable > [chan_phone.so] => (Linux Telephony API Support) > [chan_zap.so] => (Zapata Telephony w/PRI) > Aug 26 15:12:16 WARNING[1076220544]: chan_zap.c:721 zt_open: Unable to > specify channel 2: Device or resource busy > Aug 26 15:12:16 ERROR[1076220544]: chan_zap.c:5869 mkintf: Unable to open > channel 2: Device or resource busy > here = 0, tmp->channel = 2, channel = 2 > Aug 26 15:12:16 ERROR[1076220544]: chan_zap.c:8776 setup_zap: Unable to > register channel '2' > Aug 26 15:12:16 WARNING[1076220544]: loader.c:328 ast_load_resource: > chan_zap.so: load_module failed, returning -1 > -- Unregistered channel 1 > Aug 26 15:12:16 WARNING[1076220544]: loader.c:423 load_modules: Loading > module chan_zap.so failed! > > A "ps" shows that asterisk didn't start. And there is still no dialtone > from the phone on the s100u. I dont' know what to do. My x100p is > plugged into a open pci slot with the phone line from the wall into the > "wall" jack, and a normal cheapo storebought phone connected to the phone > slot. I have my s100u plugged in and nother cheapo phone connected to > that as well. > I get a dialtone from my phone connected to my x100p with or without > asterisk(I can call out and received calls like as if it was plugged > straight into the wall and not through the x100p) > I'm running Redhat9.0 on a P2 300Mhz emachine > some more details: > > lsmod gives me: > [root@localhost root]# lsmod > Module Size Used by Not tainted > wcusb 20064 0 (unused) > wcfxo 9376 0 (unused) > zaptel 178080 0 [wcusb wcfxo] > cs46xx 62832 0 (autoclean) > ac97_codec 13640 0 (autoclean) [cs46xx] > parport_pc 19076 1 (autoclean) > lp 8996 0 (autoclean) > parport 37056 1 (autoclean) [parport_pc lp] > autofs 13268 0 (autoclean) (unused) > tulip 43840 1 > sg 36524 0 (autoclean) > sr_mod 18136 0 (autoclean) > ide-scsi 12208 0 > scsi_mod 107160 3 [sg sr_mod ide-scsi] > ide-cd 35708 0 > cdrom 33728 0 [sr_mod ide-cd] > audio 46648 0 (unused) > soundcore 6404 4 [cs46xx audio] > keybdev 2944 0 (unused) > mousedev 5492 1 > hid 22148 0 (unused) > input 5856 0 [keybdev mousedev hid] > usb-uhci 26348 0 (unused) > usbcore 78784 1 [wcusb audio hid usb-uhci] > ext3 70784 2 > jbd 51892 2 [ext3] > > my /etc/zaptel.conf is as follows: > > fxsks=1 > fxoks=2 > loadzone = us > defaultzone=us > > my /etc/asterisk/zapata.conf is(not including edited out lines): > [channels] > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > rxgain=0.0 > txgain=0.0 > group=1 > immediate=no > context=bell > signalling=fxs_ks > channel=1 > context=home > signalling=fxo_ks > channel=2 > > I emailed support@digium and they told me to switch chanel 1 and channel 2 > in zaptel.conf. and to change the fxo_ks and fxs_ks in zapata.conf. and > then doing the modprobes with wcusb first. also didn't work. And besides > I read that it's better to have the x100p as channel 1 and the usb for > channel 2.I agree that swapping the channels and the signalling should make it work. It did for me. Remember to get your signalling for each channel the same in both zaptel.conf and zapata.conf the same. It will not work if they are different. Also make sure the extensions.conf has the correct channels in the extensions. Try rebooting your computer when you change this information instead of rmmoding the modules and reloading. The rmmoding did not work for me, but rebooting did.> > Anyways I thank anybody and everybody that took the time and even > considered helping a Asterisk Newbie > > Dave > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >