thr3ads.net - asterisk users - [Asterisk-Users] ztdummy running, but moh & meetme don't work [Jul 2004]

If this information is useful, please help other people find it:
Share via:

Jack Turer

2004-Jul-06 09:43 UTC

[Asterisk-Users] ztdummy running, but moh & meetme don't work

Any thoughts on the following?

I am running asterisk from CVS (downloaded yesterday's
version, just to be sure) on a test system with no
digium cards in it, so I have installed ztdummy (see
logs and screenshots below) as a timing source. 

When I call the music on hold extension from a Sipura
Sip connected analog phone, I hear nothing and start
getting

Warning[98310]: chan_sip.c:674 retrans_pkt: Maximum
retries exceeded on call
cb70fdb1-df-408047@192.168.1.17 for seqno 102
(Non-critical Response)

As well, I set up a meetme conference, and dial it,
the first user (also a Sipura sip phone) gets 'there
are no other users on the conference..", which is OK,
then a second user comes in, but they are not
conferenced anymore. I can hang up both phones, and
dial back to the conference, but I won't even hear the
'there are no other users message anymore'.

usb-uhci and ztdummy are loaded fine (see lsmod), and
this system is running Redhat9 standard install with
linux sources.

Any thoughts what might be wrong? I have already spent
the whole night googling and looking around, so I
think I covered all the basics already.

I tried to use zaptelrtc as an alternative to ztdummy,
but it doesn't compile on redhat9 (log below as well),
so that is not an alternative either.

Is ztdummy fairly reliable, or does it not work on
some motherboard usb chipsets? (this is a compaq
deskpro pentium 400mhz) 

Is there something I need to do with my kernel
(recompile?) so that ztdummy works, or anything else.

(I suspect the cause is ztdummy, since both MOH and
Meetme are broken..)

Thank you
---

Logs/Listings

#service zaptel start
Loading zaptel framework:                             
    [  OK  ]
Loading zaptel hardware modules: wcusb 
Running ztcfg:                                        
    [  OK  ]

#modprobe ztdummy

-->lsmod listing
#lsmod

Module                  Size  Used by    Not tainted
soundcore               6116   0  (autoclean)
ztdummy                 2532   0  (unused)
parport_pc             17508   1  (autoclean)
lp                      8580   0  (autoclean)
parport                33952   1  (autoclean)
[parport_pc lp]
iptable_filter          2316   0  (autoclean) (unused)
ip_tables              14488   1  [iptable_filter]
autofs                 12148   0  (autoclean) (unused)
e100                   56644   1 
wcusb                  20064   0  (unused)
zaptel                179840   4  [ztdummy wcusb]
keybdev                 2720   0  (unused)
mousedev                5204   0 
hid                    20772   0  (unused)
input                   5632   0  [keybdev mousedev
hid]
usb-uhci               24652   0  [ztdummy]
usbcore                73088   1  [wcusb hid usb-uhci]
ext3                   64704   2 
jbd                    47828   2  [ext3]

-->extensions.conf (relavent part)

;dial 500 to join the conference (doesn't work though)
exten=>500,1,Answer
exten=>500,2,MeetMe(1234)
...
;dial 6000 to hear music on hold (doesn't work though)
exten => 6000,1,Answer
exten => 6000,2,MusicOnHold,default

-->Meetme.conf
[rooms]
;
; Usage is conf => confno[,pin]
;
conf => 1234

-->musiconhold.conf
[classes]
default => quietmp3:/var/lib/asterisk/mohmp3





__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

brian

2004-Jul-06 10:30 UTC

head link

[Asterisk-Users] ztdummy running, but moh & meetme don't work

Make sure you answer the line first.

exten => 999,1,Answer
exten => 999,2,MusicOnHold(default)
> -----Original Message-----
> From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-
> admin@lists.digium.com] On Behalf Of Jack Turer
> Sent: Tuesday, July 06, 2004 11:43 AM
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] ztdummy running, but moh & meetme don't
work
>
> Any thoughts on the following?
>
> I am running asterisk from CVS (downloaded yesterday's
> version, just to be sure) on a test system with no
> digium cards in it, so I have installed ztdummy (see
> logs and screenshots below) as a timing source.
>
> When I call the music on hold extension from a Sipura
> Sip connected analog phone, I hear nothing and start
> getting
>
> Warning[98310]: chan_sip.c:674 retrans_pkt: Maximum
> retries exceeded on call
> cb70fdb1-df-408047@192.168.1.17 for seqno 102
> (Non-critical Response)
>
> As well, I set up a meetme conference, and dial it,
> the first user (also a Sipura sip phone) gets 'there
> are no other users on the conference..", which is OK,
> then a second user comes in, but they are not
> conferenced anymore. I can hang up both phones, and
> dial back to the conference, but I won't even hear the
> 'there are no other users message anymore'.
>
> usb-uhci and ztdummy are loaded fine (see lsmod), and
> this system is running Redhat9 standard install with
> linux sources.
>
> Any thoughts what might be wrong? I have already spent
> the whole night googling and looking around, so I
> think I covered all the basics already.
>
> I tried to use zaptelrtc as an alternative to ztdummy,
> but it doesn't compile on redhat9 (log below as well),
> so that is not an alternative either.
>
> Is ztdummy fairly reliable, or does it not work on
> some motherboard usb chipsets? (this is a compaq
> deskpro pentium 400mhz)
>
> Is there something I need to do with my kernel
> (recompile?) so that ztdummy works, or anything else.
>
> (I suspect the cause is ztdummy, since both MOH and
> Meetme are broken..)
>
> Thank you
> ---
>
> Logs/Listings
>
> #service zaptel start
> Loading zaptel framework:
>     [  OK  ]
> Loading zaptel hardware modules: wcusb
> Running ztcfg:
>     [  OK  ]
>
> #modprobe ztdummy
>
> -->lsmod listing
> #lsmod
>
> Module                  Size  Used by    Not tainted
> soundcore               6116   0  (autoclean)
> ztdummy                 2532   0  (unused)
> parport_pc             17508   1  (autoclean)
> lp                      8580   0  (autoclean)
> parport                33952   1  (autoclean)
> [parport_pc lp]
> iptable_filter          2316   0  (autoclean) (unused)
> ip_tables              14488   1  [iptable_filter]
> autofs                 12148   0  (autoclean) (unused)
> e100                   56644   1
> wcusb                  20064   0  (unused)
> zaptel                179840   4  [ztdummy wcusb]
> keybdev                 2720   0  (unused)
> mousedev                5204   0
> hid                    20772   0  (unused)
> input                   5632   0  [keybdev mousedev
> hid]
> usb-uhci               24652   0  [ztdummy]
> usbcore                73088   1  [wcusb hid usb-uhci]
> ext3                   64704   2
> jbd                    47828   2  [ext3]
>
> -->extensions.conf (relavent part)
>
> ;dial 500 to join the conference (doesn't work though)
> exten=>500,1,Answer
> exten=>500,2,MeetMe(1234)
> ...
> ;dial 6000 to hear music on hold (doesn't work though)
> exten => 6000,1,Answer
> exten => 6000,2,MusicOnHold,default
>
> -->Meetme.conf
> [rooms]
> ;
> ; Usage is conf => confno[,pin]
> ;
> conf => 1234
>
> -->musiconhold.conf
> [classes]
> default => quietmp3:/var/lib/asterisk/mohmp3
>
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

William Suffill

2004-Jul-06 11:07 UTC

head link

[Asterisk-Users] ztdummy running, but moh & meetme don't work

2.4 kernel? I have a RH 9 w/ 2.4 using ztdummy just fine a bit older though.

Message seems to show that the phones have trouble reaching each
other. Did Sip to Sip between the phones work fine?

On Tue, 6 Jul 2004 09:43:18 -0700 (PDT), Jack Turer
<jack_turer@yahoo.com> wrote:> Any thoughts on the following?
> 
> I am running asterisk from CVS (downloaded yesterday's
> version, just to be sure) on a test system with no
> digium cards in it, so I have installed ztdummy (see
> logs and screenshots below) as a timing source.
> 
> When I call the music on hold extension from a Sipura
> Sip connected analog phone, I hear nothing and start
> getting
> 
> Warning[98310]: chan_sip.c:674 retrans_pkt: Maximum
> retries exceeded on call
> cb70fdb1-df-408047@192.168.1.17 for seqno 102
> (Non-critical Response)
> 
> As well, I set up a meetme conference, and dial it,
> the first user (also a Sipura sip phone) gets 'there
> are no other users on the conference..", which is OK,
> then a second user comes in, but they are not
> conferenced anymore. I can hang up both phones, and
> dial back to the conference, but I won't even hear the
> 'there are no other users message anymore'.
> 
> usb-uhci and ztdummy are loaded fine (see lsmod), and
> this system is running Redhat9 standard install with
> linux sources.
> 
> Any thoughts what might be wrong? I have already spent
> the whole night googling and looking around, so I
> think I covered all the basics already.
> 
> I tried to use zaptelrtc as an alternative to ztdummy,
> but it doesn't compile on redhat9 (log below as well),
> so that is not an alternative either.
> 
> Is ztdummy fairly reliable, or does it not work on
> some motherboard usb chipsets? (this is a compaq
> deskpro pentium 400mhz)
> 
> Is there something I need to do with my kernel
> (recompile?) so that ztdummy works, or anything else.
> 
> (I suspect the cause is ztdummy, since both MOH and
> Meetme are broken..)
> 
> Thank you
> ---
> 
> Logs/Listings
> 
> #service zaptel start
> Loading zaptel framework:
>     [  OK  ]
> Loading zaptel hardware modules: wcusb
> Running ztcfg:
>     [  OK  ]
> 
> #modprobe ztdummy
> 
> -->lsmod listing
> #lsmod
> 
> Module                  Size  Used by    Not tainted
> soundcore               6116   0  (autoclean)
> ztdummy                 2532   0  (unused)
> parport_pc             17508   1  (autoclean)
> lp                      8580   0  (autoclean)
> parport                33952   1  (autoclean)
> [parport_pc lp]
> iptable_filter          2316   0  (autoclean) (unused)
> ip_tables              14488   1  [iptable_filter]
> autofs                 12148   0  (autoclean) (unused)
> e100                   56644   1
> wcusb                  20064   0  (unused)
> zaptel                179840   4  [ztdummy wcusb]
> keybdev                 2720   0  (unused)
> mousedev                5204   0
> hid                    20772   0  (unused)
> input                   5632   0  [keybdev mousedev
> hid]
> usb-uhci               24652   0  [ztdummy]
> usbcore                73088   1  [wcusb hid usb-uhci]
> ext3                   64704   2
> jbd                    47828   2  [ext3]
> 
> -->extensions.conf (relavent part)
> 
> ;dial 500 to join the conference (doesn't work though)
> exten=>500,1,Answer
> exten=>500,2,MeetMe(1234)
> ...
> ;dial 6000 to hear music on hold (doesn't work though)
> exten => 6000,1,Answer
> exten => 6000,2,MusicOnHold,default
> 
> -->Meetme.conf
> [rooms]
> ;
> ; Usage is conf => confno[,pin]
> ;
> conf => 1234
> 
> -->musiconhold.conf
> [classes]
> default => quietmp3:/var/lib/asterisk/mohmp3
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Seemingly Similar Threads

Search for more seemingly similar threads

asterisk users - Jul 2004 - ztdummy running, but moh & meetme don't work

[Asterisk-Users] ztdummy running, but moh & meetme don't work

[Asterisk-Users] ztdummy running, but moh & meetme don't work

[Asterisk-Users] ztdummy running, but moh & meetme don't work

Seemingly Similar Threads