likaijun
2010-Apr-13 06:51 UTC
[zfs-discuss] select a qlogic fc HBA port to a qlc/qlt mode?
hello,all,I want to add a dual ports FC HBA (qlogic 2462)to my opensolaris snv-133. My Purpose is one port is set to Initiator mode and another is target mode. #luxadm -e port /device/pci..0 at ... connected /device/pci...0,1 at .. connected I konw it is the initiator mode. then I updadate_drv -a -i ''pci....0,1@'' qlt after reboot, Changes is not effected.It is to say .now I only use them all to qlc or qlt mode. updadate_drv -a -i ''pci....0@'' qlt is the same. I can only add or remove : update_drv -a(-d) -i ''pciex1077,2432'' qlc(qlt) I read the /etc/path_to inst "/pci at 0,0/pci8086,3609 at 6/pci1077,138 at 0" 0 "qlc" "/pci at 0,0/pci8086,3609 at 6/pci1077,138 at 0" 0 "qlt" "/pci at 0,0/pci8086,3609 at 6/pci1077,138 at 0" 1 "qlc" "/pci at 0,0/pci8086,3609 at 6/pci1077,138 at 0" 1"qlt" I find a basic doc web: http://wikis.sun.com/display/OpenSolarisInfo/How+to+Configure+Fibre+Channel+Ports -- This message posted from opensolaris.org