Hy all,
recently I upgraded to S10U8 a T5120 using LU. The system had a zones
configured and at time of upgrade procedure the zones was still alive
and worked fine. The LU procedure was ended successfully. Zones on the
system was installed in a ZFS filesystem. Here the result at the end
of LU (ABE-from: s10Aug2007, ABE-to: s10Set2009):
# zfs list
NAME
USED AVAIL REFER MOUNTPOINT
tank/zones/zone01
69.8M 52.9G 268M /opt/zones/zone01
tank/zones/zone01-s10Aug2007 5.74G 52.9G
5.74G /opt/zones/zone01-s10Aug2007
tank/zones/zone01-s10Aug2007 at s10Set2009 3.75M - 5.74G -
I successfully destroyed the clone and snapshot as:
# zfs get origin:
NAME PROPERTY VALUE
SOURCE
tank/zones/zone01 origin
tank/zones/zone01-s10Aug2007 at s10Set2009
-
tank/zones/zone01 at s10Set2009 origin -
-
tank/zones/zone01-s10Aug2007 origin
tank/zones/zone01 at s10Set2009 -
# zfs promote tank/zones/zone01
# zfs destroy tank/zones/zone01-s10Aug2007
# zfs destroy tank/zones/zone01 at s10Set2009
At the end:
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
tank/zones/zone01 268M 59.7G 268M /opt/zones/zone01
It''s that normal after a LU the zfs filesystem must be promoted
manually? I''t depend that in case of roll-back (booting the system to
ABE-old) it''s needed to have the previous state? I can''t
verify
configuration in the ABE old the zone-path and zfs filesystem the
previuos filesystem is "tank/zones/zone01-s10Aug2007" (zfs) with
mountpoint "/opt/zones/zone01-s10Aug2007", after two weeks of working
I destroyed the ABE-old.
Thanks
Cesare
--
Mike Ditka - "If God had wanted man to play soccer, he wouldn''t
have
given us arms." -
http://www.brainyquote.com/quotes/authors/m/mike_ditka.html
