A majority of the time when the server is rebooted I get this on a zpool:
pool: ipapool
state: FAULTED
status: An intent log record could not be read.
Waiting for adminstrator intervention to fix the faulted pool.
action: Either restore the affected device(s) and run ''zpool
online'',
or ignore the intent log records by running ''zpool
clear''.
see: http://www.sun.com/msg/ZFS-8000-K4
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
ipapool FAULTED 0 0 0 bad intent log
raidz1 ONLINE 0 0 0
c7t2d0 ONLINE 0 0 0
c7t3d0 ONLINE 0 0 0
c7t4d0 ONLINE 0 0 0
How is the intent log bad but none of the devices?
The only way I can find to clear it is by doing zpool clear ipapool which gives
me this:
pool: ipapool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
ipapool ONLINE 0 0 0
raidz1 ONLINE 0 0 0
c7t2d0 ONLINE 0 0 0
c7t3d0 ONLINE 0 0 0
c7t4d0 ONLINE 0 0 0
errors: No known data errors
I then follow that by a scrub which gives me this:
pool: ipapool
state: ONLINE
scrub: scrub completed after 0h1m with 0 errors on Sun Dec 13 17:44:05 2009
config:
NAME STATE READ WRITE CKSUM
ipapool ONLINE 0 0 0
raidz1 ONLINE 0 0 0
c7t2d0 ONLINE 0 0 0 15K repaired
c7t3d0 ONLINE 0 0 0
c7t4d0 ONLINE 0 0 0
errors: No known data errors
Any thoughts on why this would be happening? or how to fix? I don''t
see any errors reported by the raid controller?
--
This message posted from opensolaris.org
Hi James, What are the commands that are used to reboot this server? Also, you can use the fmdump -eV command to review any underlying hardware problems. You might see some clues about what is going on with c7t2d0. Thanks, Cindy On 12/13/09 16:46, James Nelson wrote:> A majority of the time when the server is rebooted I get this on a zpool: > > pool: ipapool > state: FAULTED > status: An intent log record could not be read. > Waiting for adminstrator intervention to fix the faulted pool. > action: Either restore the affected device(s) and run ''zpool online'', > or ignore the intent log records by running ''zpool clear''. > see: http://www.sun.com/msg/ZFS-8000-K4 > scrub: none requested > config: > > NAME STATE READ WRITE CKSUM > ipapool FAULTED 0 0 0 bad intent log > raidz1 ONLINE 0 0 0 > c7t2d0 ONLINE 0 0 0 > c7t3d0 ONLINE 0 0 0 > c7t4d0 ONLINE 0 0 0 > > > How is the intent log bad but none of the devices? > > The only way I can find to clear it is by doing zpool clear ipapool which gives me this: > pool: ipapool > state: ONLINE > scrub: none requested > config: > > NAME STATE READ WRITE CKSUM > ipapool ONLINE 0 0 0 > raidz1 ONLINE 0 0 0 > c7t2d0 ONLINE 0 0 0 > c7t3d0 ONLINE 0 0 0 > c7t4d0 ONLINE 0 0 0 > > errors: No known data errors > > > I then follow that by a scrub which gives me this: > pool: ipapool > state: ONLINE > scrub: scrub completed after 0h1m with 0 errors on Sun Dec 13 17:44:05 2009 > config: > > NAME STATE READ WRITE CKSUM > ipapool ONLINE 0 0 0 > raidz1 ONLINE 0 0 0 > c7t2d0 ONLINE 0 0 0 15K repaired > c7t3d0 ONLINE 0 0 0 > c7t4d0 ONLINE 0 0 0 > > errors: No known data errors > > > Any thoughts on why this would be happening? or how to fix? I don''t see any errors reported by the raid controller?