Hi, I have a fresh install of opensolaris snv_111b. I''m having problems
writing to an e-sata drive. I have tried upgrading to svn127 and the problem
persists. BIOS set for AHCI. Motherboard uses a AMD 760G + SB700 chipset. Drive
works fine in linux and windows with ext3/4 or ntfs. I''d like to use it
for backing up zfs. Its a seagate freeagent drive.
So I create a zpool:
root at stoey:/# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c7t0d0 <ATA-WDC WD1001FALS-0-0K05-931.51GB>
/pci at 0,0/pci1002,4391 at 11/disk at 0,0
1. c7t1d0 <ATA-WDC WD1001FALS-0-0K05-931.51GB>
/pci at 0,0/pci1002,4391 at 11/disk at 1,0
2. c7t2d0 <ATA-WDC WD1001FALS-0-0K05-931.51GB>
/pci at 0,0/pci1002,4391 at 11/disk at 2,0
3. c7t3d0 <ATA-WDC WD1001FALS-0-0K05-931.51GB>
/pci at 0,0/pci1002,4391 at 11/disk at 3,0
4. c7t4d0 <ATA-Seagate FreeAgen-4115-1.36TB>
/pci at 0,0/pci1002,4391 at 11/disk at 4,0
5. c8d0 <DEFAULT cyl 19454 alt 2 hd 255 sec 63>
/pci at 0,0/pci-ide at 14,1/ide at 0/cmdk at 0,0
Specify disk (enter its number): ^C
root at stoey:/# zpool create backups c7t4d0
root at stoey:/# zfs list
NAME USED AVAIL REFER MOUNTPOINT
backups 71.5K 1.34T 19K /backups
This alone results in the following messages:
cat /var/adm/messages
pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) instance 1 irq 0xf vector
0x44 ioapic 0x4 intin 0xf is bound to cpu 0
ahci: [ID 777486 kern.warning] WARNING: ahci0: ahci port 4 has interface fatal
error
ahci: [ID 687168 kern.warning] WARNING: ahci0: ahci port 4 is trying to do error
recovery
ahci: [ID 551337 kern.warning] WARNING: ahci0: Transient Data Integrity Error
(T)
Internal Error (E)
10B to 8B Decode Error (B)
CRC Error (C)
Then copying data to the file system results in more errors until the system
hangs and stops responding.
cat /var/adm/messages
ahci: [ID 296163 kern.warning] WARNING: ahci0: ahci port 4 has task file error
ahci: [ID 687168 kern.warning] WARNING: ahci0: ahci port 4 is trying to do error
recovery
ahci: [ID 551337 kern.warning] WARNING: ahci0:
ahci: [ID 693748 kern.warning] WARNING: ahci0: ahci port 4 task_file_status =
0x8451
ahci: [ID 777486 kern.warning] WARNING: ahci0: ahci port 4 has interface fatal
error
ahci: [ID 687168 kern.warning] WARNING: ahci0: ahci port 4 is trying to do error
recovery
ahci: [ID 551337 kern.warning] WARNING: ahci0: Recovered Data Integrity Error
(I)
Internal Error (E)
10B to 8B Decode Error (B)
Handshake Error (H)
This continues and leads to a crash, forcing me to hit the reset button. No
console access and the network stack is down.
ahci: [ID 860969 kern.warning] WARNING: ahci0: ahci_port_reset port 4 the device
hardware has been initialized and the power-up diagnostics failed
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
fmd: [ID 441519 daemon.error] SUNW-MSG-ID: ZFS-8000-HC, TYPE: Error, VER: 1,
SEVERITY: Major
EVENT-TIME: Tue Jan 1 02:20:35 PST 2008
PLATFORM: Unknow, CSN: Unknow, HOSTNAME: stoey
SOURCE: zfs-diagnosis, REV: 1.0
EVENT-ID: 606acf45-d18e-673f-8577-a5f2eab96861
DESC: The ZFS pool has experienced currently unrecoverable I/O
failures. Refer to http://sun.com/msg/ZFS-8000-HC for more information.
AUTO-RESPONSE: No automated response will be taken.
IMPACT: Read and write I/Os cannot be serviced.
REC-ACTION: Make sure the affected devices are connected, then run
''zpool clear''.
fmd: [ID 441519 daemon.error] SUNW-MSG-ID: ZFS-8000-FD, TYPE: Fault, VER: 1,
SEVERITY: Major
EVENT-TIME: Tue Jan 1 02:20:39 PST 2008
PLATFORM: Unknow, CSN: Unknow, HOSTNAME: stoey
SOURCE: zfs-diagnosis, REV: 1.0
EVENT-ID: 0eae1af9-a1aa-c297-d6b7-bd915a6b7de9
DESC: The number of I/O errors associated with a ZFS device exceeded
acceptable levels. Refer to http://sun.com/msg/ZFS-8000-FD for more
information.
AUTO-RESPONSE: The device has been offlined and marked as faulted. An attempt
will be made to activate a hot spare if available.
IMPACT: Fault tolerance of the pool may be compromised.
REC-ACTION: Run ''zpool status -x'' and replace the bad device.
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci1002,4391 at 11/disk at
4,0 (sd4):
SYNCHRONIZE CACHE command failed (5)
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
sata: [ID 801845 kern.info] /pci at 0,0/pci1002,4391 at 11:
SATA port 4 error
scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci1002,4391 at 11/disk at
4,0 (sd4):
SYNCHRONIZE CACHE command failed (5)
I''ve searched the forums and they''ve been very helpful but I
don''t see anything about this. I created a pool with the internal sata
drives and there are no issues transferring data on those ports. What should I
try to isolate and hopefully resolve the issue?
Thanks,
Jason
--
This message posted from opensolaris.org