I have a system that is running Solaris 10 Update 3 TX with 1 zpool and 5 zones. Everything on it is running fine. I take the drive to my disk duplicator and dupe it bit by bit to another drive, put the newly duped drive in the same machine and boot it up everything boots up fine. Then I do a zpool status <zpool name> the status is FAULTED, I get the error insufficient replicas. The slice it is mounted to is c0d0s4 and it''s error is cannot open. The action stated is use the zpool online command but that does not work. Also brining up format is states that c0d0s4 is used for a zpool. I checked with the manufacture of the drive duplicator to see if there was any known issues with ZFS and their machine and it didn''t sound like the tech had ever heard of ZFS. But I have it set to do a bit by bit copy with a checksum verification when it completes. Does anyone happen to have an idea of why this may be failing? This message posted from opensolaris.org
Just to let everyone know what I did to ''fix'' the problem. By halting the zones and the exporting the zpool I was able to duplicate the drive without issue. Just had to import the zpool upon booting and boot the zones. Although my setup uses slices for the zpool (this is not supported by SUN), I did want to let you know it does work. This message posted from opensolaris.org
Adam wrote:> Just to let everyone know what I did to ''fix'' the problem. By halting the zones and the exporting the zpool I was able to duplicate the drive without issue. Just had to import the zpool upon booting and boot the zones. Although my setup uses slices for the zpool (this is not supported by SUN), I did want to let you know it does work.Hi Adam, could you explain what you mean by "my setup uses slices for the zpool (this is not supported by SUN)" This is not a ZFS restriction, zones? -- richard