jacek burghardt wrote:>I had installe xen 4.2 on arch linux and it is running on poweredge 860.
>I have issue were i can''t get two network interfaces assigned to
pfsense. So
>
>my pfsense config file has thys setup for interfaces
>
>vif = [ ''type=ioemu, bridge=xenbr0, model=e1000''
> ''type=ioemu, bridge=xenbr1, model=e1000'' ]
>and my brctl shows
>
>xenbr0 8000.0015c5f54501 no eth0
> tap2.0
> vif2.0
>xenbr1 8000.0015c5f54502 no eth1
> tap1.0
> vif1.0
>How I can assign eth0 to em0 and use it is lan and eth1 to em1 as wan.
I don''t understand what the question is - what are em0 and em1 ?
Are you asking if you can link a physical NIC *only* to a singel DomU
? If so then you have two options.
1) You define a bridge in Dom0, do not assign an IP address to it,
and then link the DomU to it as above. The DomU then has sole use of
that interface - albeit via a bridge in Dom0.
2) You use PCI passthrough to make the NIC directly accessible to the
DomU - it then doesn''t appear at all in Dom0.
--
Simon Hobson
Visit http://www.magpiesnestpublishing.co.uk/ for books by acclaimed
author Gladys Hobson. Novels - poetry - short stories - ideal as
Christmas stocking fillers. Some available as e-books.