Tobias Diedrich
2011-Jun-13 20:50 UTC
[Xen-users] 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU
Hi, another issue I''m seeing with 3.0-rc2 and Xen is that there is an unexpectedly high amount of kernel reserved memory. I suspect that Linux allocates page table entries and corresponding data structures for the whole 6GB areas of the provided ''physical RAM map'' even though it has rather big unusable holes in it. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) [ 0.000000] Xen: 0000000010000000 - 000000007fef0000 (unusable) [ 0.000000] Xen: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] Xen: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000016fef0000 (usable) On DOMUs I can ''fix'' this by adding ''memmap=0x800000$0x100000000'' to the kernel command line, which changes [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) [ 0.000000] Xen: 0000000100000000 - 0000000100800000 (usable) [...] [ 0.000000] Memory: 176356k/4202496k available (6096k kernel code, 3932608k absent, 93532k reserved, 4785k data, 572k init) to [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) [ 0.000000] Xen: 0000000100000000 - 0000000100800000 (usable) [...] [ 0.000000] user-defined physical RAM map: [ 0.000000] user: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] user: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] user: 0000000000100000 - 0000000010000000 (usable) [...] [ 0.000000] user: 0000000100000000 - 0000000100800000 (reserved) [ 0.000000] Memory: 244212k/262144k available (6096k kernel code, 448k absent, 17484k reserved, 4785k data, 572k init) With 66MB of usable memory out of 256MB recovered and a reasonable 93% of memory usable for userspace instead of just 67%. I also see this on my 256MB DOM0: Memory: 146536k/6028224k available (6122k kernel code, 3932612k absent, 1949076k reserved, 4761k data, 576k init) Only 143MB out of 256MB allocated for DOM0 is usable for userspace. Regards, -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Konrad Rzeszutek Wilk
2011-Jun-13 21:59 UTC
Re: [Xen-users] 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU
On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote:> Hi, > > another issue I''m seeing with 3.0-rc2 and Xen is that there is an > unexpectedly high amount of kernel reserved memory.> > I suspect that Linux allocates page table entries and corresponding > data structures for the whole 6GB areas of the provided ''physical > RAM map'' even though it has rather big unusable holes in it.Can you run it with ''memblock=debug debug loglevel=8 initcall_debug''? It should tell you where it tries (and for much space) the pagetables.> > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) > [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) > [ 0.000000] Xen: 0000000010000000 - 000000007fef0000 (unusable) > [ 0.000000] Xen: 000000007fef0000 - 000000007fef3000 (ACPI NVS) > [ 0.000000] Xen: 000000007fef3000 - 000000007ff00000 (ACPI data) > [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) > [ 0.000000] Xen: 0000000100000000 - 000000016fef0000 (usable) > > > On DOMUs I can ''fix'' this by adding ''memmap=0x800000$0x100000000'' to > the kernel command line, which changes > > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) > [ 0.000000] Xen: 0000000100000000 - 0000000100800000 (usable) > [...] > [ 0.000000] Memory: 176356k/4202496k available (6096k kernel code, 3932608k absent, 93532k reserved, 4785k data, 572k init) > > to > > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) > [ 0.000000] Xen: 0000000100000000 - 0000000100800000 (usable) > [...] > [ 0.000000] user-defined physical RAM map: > [ 0.000000] user: 0000000000000000 - 00000000000a0000 (usable) > [ 0.000000] user: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] user: 0000000000100000 - 0000000010000000 (usable) > [...] > [ 0.000000] user: 0000000100000000 - 0000000100800000 (reserved)What happens if you have ''maxmem'' value equal to ''memory'' in your guest config?> [ 0.000000] Memory: 244212k/262144k available (6096k kernel code, 448k absent, 17484k reserved, 4785k data, 572k init) > > With 66MB of usable memory out of 256MB recovered and a reasonable > 93% of memory usable for userspace instead of just 67%. > > > I also see this on my 256MB DOM0: > Memory: 146536k/6028224k available (6122k kernel code, 3932612k absent, 1949076k reserved, 4761k data, 576k init) > Only 143MB out of 256MB allocated for DOM0 is usable for userspace.> > Regards, > > -- > Tobias PGP: http://8ef7ddba.uguu.de > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-14 00:10 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU
Konrad Rzeszutek Wilk wrote:> On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote: > > Hi, > > > > another issue I''m seeing with 3.0-rc2 and Xen is that there is an > > unexpectedly high amount of kernel reserved memory. > > > > > I suspect that Linux allocates page table entries and corresponding > > data structures for the whole 6GB areas of the provided ''physical > > RAM map'' even though it has rather big unusable holes in it. > > Can you run it with ''memblock=debug debug loglevel=8 initcall_debug''? > It should tell you where it tries (and for much space) the pagetables.[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #50 SMP Tue Jun 14 01:59:04 CEST 2011 [ 0.000000] Command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 memblock=debug debug loglevel=8 initcall_debug ro [ 0.000000] released 0 pages of unused memory [ 0.000000] 1-1 mapping on 9f->100 [ 0.000000] 1-1 mapping on 7fef0->100000 [ 0.000000] Set 524657 page(s) to 1-1 mapping. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) [ 0.000000] Xen: 0000000010000000 - 000000007fef0000 (unusable) [ 0.000000] Xen: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] Xen: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000016fef0000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-7094/MS-7094, BIOS V3.6 10/12/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ f0000000 old size 32 MB [ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) [ 0.000000] last_pfn = 0x16fef0 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x400000000 [ 0.000000] memblock_x86_reserve_range: [0x01ce8000-0x01d000b5] BRK [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x7fe7f000 [ 0.000000] memory.cnt = 0x3 [ 0.000000] memory[0x0] [0x00000000010000-0x0000000009efff], 0x8f000 bytes [ 0.000000] memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes [ 0.000000] memory[0x2] [0x00000100000000-0x0000016feeffff], 0x6fef0000 bytes [ 0.000000] reserved.cnt = 0x3 [ 0.000000] reserved[0x0] [0x00000001000000-0x00000001d000b5], 0xd000b6 bytes [ 0.000000] reserved[0x1] [0x00000001e1e000-0x00000001eb1fff], 0x94000 bytes [ 0.000000] reserved[0x2] [0x00000100000000-0x0000016feeffff], 0x6fef0000 bytes [ 0.000000] initial memory mapped : 0 - 01e1e000 [ 0.000000] memblock_x86_reserve_range: [0x0009d000-0x0009efff] TRAMPOLINE [ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192 [ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000 [ 0.000000] 0000000000 - 0010000000 page 4k [ 0.000000] kernel direct mapping tables up to 10000000 @ ff7e000-10000000 [ 0.000000] memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE [ 0.000000] xen: setting RW the range ffea000 - 10000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000016fef0000 [ 0.000000] 0100000000 - 016fef0000 page 4k [ 0.000000] kernel direct mapping tables up to 16fef0000 @ f3f7000-ff7e000 [ 0.000000] memblock_x86_reserve_range: [0x0f3f7000-0x0f778fff] PGTABLE [ 0.000000] xen: setting RW the range f779000 - ff7e000 [ 0.000000] ACPI: RSDP 00000000000f8dc0 00014 (v00 VIAK8T) [ 0.000000] ACPI: RSDT 000000007fef3040 00030 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fef30c0 00074 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fef3180 04F07 (v01 VIAK8T AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007fef0000 00040 [ 0.000000] ACPI: SRAT 000000007fef8300 00090 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: APIC 000000007fef8100 00068 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffee80-0x0fffefff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0d200000-0x0f1fffff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff3000-0x0fff3fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff2000-0x0fff2fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff1000-0x0fff1fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fff0000-0x0fff0fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ffef000-0x0ffeffff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ffee000-0x0ffeefff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ffed000-0x0ffedfff] BOOTMEM [ 0.000000] memblock_x86_free_range: [0x0ee00000-0x0f1fffff] [ 0.000000] memblock_x86_free_range: [0x0f77e000-0x0fb7dfff] [ 0.000000] memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0016fef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00010000 [ 0.000000] 0: 0x00100000 -> 0x0016fef0 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3925 pages, LIFO batch:0 [ 0.000000] memblock_x86_reserve_range: [0x0fffed00-0x0fffee7f] BOOTMEM [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 47160 pages, LIFO batch:15 [ 0.000000] memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM [ 0.000000] Normal zone: 6269 pages used for memmap [ 0.000000] Normal zone: 452211 pages, LIFO batch:31 [ 0.000000] memblock_x86_reserve_range: [0x0ff5a000-0x0ff65fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ffec000-0x0ffecfff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ffeb000-0x0ffebfff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ffea000-0x0ffeafff] BOOTMEM [ 0.000000] Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] memblock_x86_reserve_range: [0x0fffec80-0x0fffecc2] BOOTMEM [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] memblock_x86_reserve_range: [0x0fffea80-0x0fffec77] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe980-0x0fffe9e7] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe900-0x0fffe967] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe880-0x0fffe8e7] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe800-0x0fffe867] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe780-0x0fffe7e7] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe700-0x0fffe767] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe680-0x0fffe6e7] BOOTMEM [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7ed00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.0 (preserve-AD) [ 0.000000] memblock_x86_reserve_range: [0x0fffe5c0-0x0fffe651] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe500-0x0fffe591] BOOTMEM [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] memblock_x86_reserve_range: [0x0ff59000-0x0ff59fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ff58000-0x0ff58fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0ff22000-0x0ff57fff] BOOTMEM [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88000ff22000 s79488 r8192 d22912 u110592 [ 0.000000] memblock_x86_reserve_range: [0x0fffe4c0-0x0fffe4c7] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe480-0x0fffe487] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe440-0x0fffe447] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe400-0x0fffe40f] BOOTMEM [ 0.000000] pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] memblock_x86_reserve_range: [0x0fffe300-0x0fffe3ff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe280-0x0fffe2c7] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fffe200-0x0fffe247] BOOTMEM [ 0.000000] memblock_x86_free_range: [0x0ff59000-0x0ff59fff] [ 0.000000] memblock_x86_free_range: [0x0ff58000-0x0ff58fff] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503296 [ 0.000000] Kernel command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 memblock=debug debug loglevel=8 initcall_debug ro [ 0.000000] memblock_x86_reserve_range: [0x0ff1a000-0x0ff21fff] BOOTMEM [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] memblock_x86_reserve_range: [0x0fd1a000-0x0ff19fff] BOOTMEM [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] memblock_x86_reserve_range: [0x0fc1a000-0x0fd19fff] BOOTMEM [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] memblock_x86_reserve_range: [0x09200000-0x0d1fffff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fbfa000-0x0fc19fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fbba000-0x0fbf9fff] BOOTMEM [ 0.000000] memblock_x86_reserve_range: [0x0fbb2000-0x0fbb9fff] BOOTMEM [ 0.000000] Placing 64MB software IO TLB between ffff880009200000 - ffff88000d200000 [ 0.000000] software IO TLB at phys 0x9200000 - 0xd200000 [ 0.000000] Subtract (27 early reservations) [ 0.000000] [000009d000-000009efff] [ 0.000000] [0001000000-0001d000b5] [ 0.000000] [0001e1e000-0001eb1fff] [ 0.000000] [0009200000-000edfffff] [ 0.000000] [000f3f7000-000f778fff] [ 0.000000] [000fbb2000-000ff57fff] [ 0.000000] [000ff5a000-000fffdfff] [ 0.000000] [000fffe200-000fffe247] [ 0.000000] [000fffe280-000fffe2c7] [ 0.000000] [000fffe300-000fffe40f] [ 0.000000] [000fffe440-000fffe447] [ 0.000000] [000fffe480-000fffe487] [ 0.000000] [000fffe4c0-000fffe4c7] [ 0.000000] [000fffe500-000fffe591] [ 0.000000] [000fffe5c0-000fffe651] [ 0.000000] [000fffe680-000fffe6e7] [ 0.000000] [000fffe700-000fffe767] [ 0.000000] [000fffe780-000fffe7e7] [ 0.000000] [000fffe800-000fffe867] [ 0.000000] [000fffe880-000fffe8e7] [ 0.000000] [000fffe900-000fffe967] [ 0.000000] [000fffe980-000fffe9e7] [ 0.000000] [000fffea00-000fffea67] [ 0.000000] [000fffea80-000fffec77] [ 0.000000] [000fffec80-000fffecc2] [ 0.000000] [000fffed00-000fffffff] [ 0.000000] [0100000000-016feeffff] [ 0.000000] Memory: 145576k/6028224k available (6122k kernel code, 3932612k absent, 1950036k reserved, 4761k data, 576k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen: --> pirq=9 -> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 [ 0.000000] xen: --> pirq=2 -> irq=2 [ 0.000000] xen: --> pirq=3 -> irq=3 [ 0.000000] xen: --> pirq=4 -> irq=4 [ 0.000000] xen: --> pirq=5 -> irq=5 [ 0.000000] xen: --> pirq=6 -> irq=6 [ 0.000000] xen: --> pirq=7 -> irq=7 [ 0.000000] xen: --> pirq=8 -> irq=8 [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> pirq=9 -> irq=9 [ 0.000000] xen: --> pirq=10 -> irq=10 [ 0.000000] xen: --> pirq=11 -> irq=11 [ 0.000000] xen: --> pirq=12 -> irq=12 [ 0.000000] xen: --> pirq=13 -> irq=13 [ 0.000000] xen: --> pirq=14 -> irq=14 [ 0.000000] xen: --> pirq=15 -> irq=15 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try ''cgroup_disable=memory'' option if you don''t want memory cgroups [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2199.838 MHz processor. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.67 BogoMIPS (lpj=21998380) [ 0.010000] pid_max: default: 32768 minimum: 301 [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] Initializing cgroup subsys blkio [ 0.010000] tseg: 007ff00000 [ 0.010000] SMP alternatives: switching to UP code [ 0.010508] Freeing SMP alternatives: 28k freed [ 0.010640] ACPI: Core revision 20110413 [ 0.019291] calling trace_init_flags_sys_exit+0x0/0x12 @ 1 [ 0.019414] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs [ 0.019611] calling trace_init_flags_sys_enter+0x0/0x12 @ 1 [ 0.019728] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs [ 0.019923] calling init_hw_perf_events+0x0/0xf1a @ 1 [ 0.020000] Performance Events: Broken PMU hardware detected, using software events only. [ 0.020222] initcall init_hw_perf_events+0x0/0xf1a returned 0 after 9765 usecs [ 0.020420] calling register_trigger_all_cpu_backtrace+0x0/0x14 @ 1 [ 0.020538] initcall register_trigger_all_cpu_backtrace+0x0/0x14 returned 0 after 0 usecs [ 0.020737] calling migration_init+0x0/0x70 @ 1 [ 0.020854] initcall migration_init+0x0/0x70 returned 0 after 0 usecs [ 0.020973] calling spawn_ksoftirqd+0x0/0x55 @ 1 [ 0.021117] initcall spawn_ksoftirqd+0x0/0x55 returned 0 after 0 usecs [ 0.021235] calling init_workqueues+0x0/0x2ff @ 1 [ 0.021446] initcall init_workqueues+0x0/0x2ff returned 0 after 0 usecs [ 0.021567] calling init_call_single_data+0x0/0x8c @ 1 [ 0.021682] initcall init_call_single_data+0x0/0x8c returned 0 after 0 usecs [ 0.021800] calling cpu_stop_init+0x0/0xaa @ 1 [ 0.021939] initcall cpu_stop_init+0x0/0xaa returned 0 after 0 usecs [ 0.022055] calling rcu_spawn_kthreads+0x0/0xc9 @ 1 [ 0.022220] initcall rcu_spawn_kthreads+0x0/0xc9 returned 0 after 0 usecs [ 0.022337] calling relay_init+0x0/0x14 @ 1 [ 0.022450] initcall relay_init+0x0/0x14 returned 0 after 0 usecs [ 0.022566] calling tracer_alloc_buffers+0x0/0x168 @ 1 [ 0.022732] initcall tracer_alloc_buffers+0x0/0x168 returned 0 after 0 usecs [ 0.022850] calling init_trace_printk+0x0/0x12 @ 1 [ 0.022964] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs [ 0.023084] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.023225] Brought up 1 CPUs [ 0.023482] devtmpfs: initialized [ 0.023999] calling init_mmap_min_addr+0x0/0x16 @ 1 [ 0.024116] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs [ 0.024233] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 [ 0.024354] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs [ 0.024551] calling net_ns_init+0x0/0x154 @ 1 [ 0.024669] initcall net_ns_init+0x0/0x154 returned 0 after 0 usecs [ 0.024784] calling cpufreq_tsc+0x0/0x30 @ 1 [ 0.024898] initcall cpufreq_tsc+0x0/0x30 returned 0 after 0 usecs [ 0.025014] calling pci_reboot_init+0x0/0x14 @ 1 [ 0.025129] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs [ 0.025245] calling init_lapic_sysfs+0x0/0x20 @ 1 [ 0.025359] initcall init_lapic_sysfs+0x0/0x20 returned 0 after 0 usecs [ 0.025475] calling init_smp_flush+0x0/0x2d @ 1 [ 0.025589] initcall init_smp_flush+0x0/0x2d returned 0 after 0 usecs [ 0.025706] calling alloc_frozen_cpus+0x0/0x8 @ 1 [ 0.025819] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs [ 0.025934] calling sysctl_init+0x0/0x16 @ 1 [ 0.026050] initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs [ 0.026165] calling ksysfs_init+0x0/0x94 @ 1 [ 0.026283] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs [ 0.026398] calling init_jiffies_clocksource+0x0/0x12 @ 1 [ 0.026514] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs [ 0.026710] calling pm_init+0x0/0x63 @ 1 [ 0.029012] initcall pm_init+0x0/0x63 returned 0 after 0 usecs [ 0.029128] calling init_zero_pfn+0x0/0x35 @ 1 [ 0.029241] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs [ 0.029358] calling fsnotify_init+0x0/0x26 @ 1 [ 0.029474] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs [ 0.029590] calling filelock_init+0x0/0x2e @ 1 [ 0.029708] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs [ 0.029824] calling init_misc_binfmt+0x0/0x44 @ 1 [ 0.029939] initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 usecs [ 0.030000] calling init_script_binfmt+0x0/0x14 @ 1 [ 0.030000] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs [ 0.030000] calling init_elf_binfmt+0x0/0x14 @ 1 [ 0.030000] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 0.030000] calling init_compat_elf_binfmt+0x0/0x14 @ 1 [ 0.030000] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 0.030000] calling debugfs_init+0x0/0x5c @ 1 [ 0.030000] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs [ 0.030000] calling calibrate_xor_blocks+0x0/0xa0 @ 1 [ 0.030000] xor: automatically using best checksumming function: generic_sse [ 0.070002] generic_sse: 2915.200 MB/sec [ 0.070116] xor: using function: generic_sse (2915.200 MB/sec) [ 0.070235] initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after 48828 usecs [ 0.070431] calling random32_init+0x0/0xd8 @ 1 [ 0.070545] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs [ 0.070663] calling __gnttab_init+0x0/0x21 @ 1 [ 0.070793] Grant table initialized [ 0.070905] initcall __gnttab_init+0x0/0x21 returned 0 after 0 usecs [ 0.071020] calling cpufreq_core_init+0x0/0xad @ 1 [ 0.071137] initcall cpufreq_core_init+0x0/0xad returned 0 after 0 usecs [ 0.071255] calling cpuidle_init+0x0/0x40 @ 1 [ 0.071371] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs [ 0.071487] calling sock_init+0x0/0x83 @ 1 [ 0.071638] initcall sock_init+0x0/0x83 returned 0 after 0 usecs [ 0.071754] calling netpoll_init+0x0/0x31 @ 1 [ 0.071868] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs [ 0.071984] calling netlink_proto_init+0x0/0x1ad @ 1 [ 0.072111] NET: Registered protocol family 16 [ 0.072236] initcall netlink_proto_init+0x0/0x1ad returned 0 after 0 usecs [ 0.072353] calling bdi_class_init+0x0/0x49 @ 1 [ 0.072537] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs [ 0.072655] calling kobject_uevent_init+0x0/0x21 @ 1 [ 0.072773] initcall kobject_uevent_init+0x0/0x21 returned 0 after 0 usecs [ 0.072891] calling pcibus_class_init+0x0/0x19 @ 1 [ 0.073057] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs [ 0.073177] calling pci_driver_init+0x0/0x12 @ 1 [ 0.073345] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs [ 0.073464] calling xenbus_init+0x0/0x371 @ 1 [ 0.073649] initcall xenbus_init+0x0/0x371 returned 0 after 0 usecs [ 0.073765] calling tty_class_init+0x0/0x34 @ 1 [ 0.073928] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs [ 0.074046] calling vtconsole_class_init+0x0/0xeb @ 1 [ 0.074271] initcall vtconsole_class_init+0x0/0xeb returned 0 after 0 usecs [ 0.074390] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1 [ 0.074507] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs [ 0.074702] calling i2c_init+0x0/0x6f @ 1 [ 0.074918] initcall i2c_init+0x0/0x6f returned 0 after 0 usecs [ 0.075036] calling amd_postcore_init+0x0/0x150 @ 1 [ 0.075161] node 0 link 0: io port [1000, fffff] [ 0.075277] TOM: 0000000080000000 aka 2048M [ 0.075398] node 0 link 0: mmio [a0000, bffff] [ 0.075542] node 0 link 0: mmio [80000000, ff70ffff] [ 0.075687] bus: [00, ff] on node 0 link 0 [ 0.075802] bus: 00 index 0 [io 0x0000-0xffff] [ 0.075917] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.076032] bus: 00 index 2 [mem 0x80000000-0xfcffffffff] [ 0.076148] initcall amd_postcore_init+0x0/0x150 returned 0 after 0 usecs [ 0.076266] calling arch_kdebugfs_init+0x0/0x24 @ 1 [ 0.076384] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs [ 0.076502] calling configure_trampolines+0x0/0x29 @ 1 [ 0.076621] initcall configure_trampolines+0x0/0x29 returned 0 after 0 usecs [ 0.076739] calling mtrr_if_init+0x0/0x64 @ 1 [ 0.076853] initcall mtrr_if_init+0x0/0x64 returned -19 after 0 usecs [ 0.076972] calling ffh_cstate_init+0x0/0x2a @ 1 [ 0.077087] initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs [ 0.077206] initcall ffh_cstate_init+0x0/0x2a returned with error code -1 [ 0.077323] calling acpi_pci_init+0x0/0x61 @ 1 [ 0.077436] ACPI: bus type pci registered [ 0.077551] initcall acpi_pci_init+0x0/0x61 returned 0 after 0 usecs [ 0.077667] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 [ 0.077783] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs [ 0.077979] calling register_xen_pci_notifier+0x0/0x31 @ 1 [ 0.078096] initcall register_xen_pci_notifier+0x0/0x31 returned 0 after 0 usecs [ 0.078291] calling dmi_id_init+0x0/0x30e @ 1 [ 0.078532] initcall dmi_id_init+0x0/0x30e returned 0 after 0 usecs [ 0.078650] calling pci_arch_init+0x0/0x69 @ 1 [ 0.078782] PCI: Using configuration type 1 for base access [ 0.078908] initcall pci_arch_init+0x0/0x69 returned 0 after 0 usecs [ 0.079025] calling topology_init+0x0/0x40 @ 1 [ 0.079188] initcall topology_init+0x0/0x40 returned 0 after 0 usecs [ 0.079305] calling mtrr_init_finialize+0x0/0x36 @ 1 [ 0.079422] initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs [ 0.079540] calling init_vdso_vars+0x0/0xf8 @ 1 [ 0.079661] initcall init_vdso_vars+0x0/0xf8 returned 0 after 0 usecs [ 0.079778] calling sysenter_setup+0x0/0x2c8 @ 1 [ 0.079897] initcall sysenter_setup+0x0/0x2c8 returned 0 after 0 usecs [ 0.080000] calling param_sysfs_init+0x0/0x1b4 @ 1 [ 0.090988] initcall param_sysfs_init+0x0/0x1b4 returned 0 after 19531 usecs [ 0.091118] calling pm_sysrq_init+0x0/0x19 @ 1 [ 0.091234] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs [ 0.091351] calling default_bdi_init+0x0/0xa9 @ 1 [ 0.091622] initcall default_bdi_init+0x0/0xa9 returned 0 after 0 usecs [ 0.091740] calling init_bio+0x0/0xe5 @ 1 [ 0.091879] bio: create slab <bio-0> at 0 [ 0.092001] initcall init_bio+0x0/0xe5 returned 0 after 0 usecs [ 0.092116] calling fsnotify_notification_init+0x0/0x8b @ 1 [ 0.092242] initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs [ 0.092438] calling cryptomgr_init+0x0/0x12 @ 1 [ 0.092552] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs [ 0.092668] calling blk_settings_init+0x0/0x2a @ 1 [ 0.092782] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs [ 0.092900] calling blk_ioc_init+0x0/0x2a @ 1 [ 0.093017] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs [ 0.093133] calling blk_softirq_init+0x0/0x6e @ 1 [ 0.093249] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs [ 0.093366] calling blk_iopoll_setup+0x0/0x6e @ 1 [ 0.093481] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs [ 0.093599] calling genhd_device_init+0x0/0x7c @ 1 [ 0.093818] initcall genhd_device_init+0x0/0x7c returned 0 after 0 usecs [ 0.093938] calling raid6_select_algo+0x0/0x1bd @ 1 [ 0.260022] raid6: int64x1 2044 MB/s [ 0.430003] raid6: int64x2 2403 MB/s [ 0.600006] raid6: int64x4 1709 MB/s [ 0.770032] raid6: int64x8 1243 MB/s [ 0.940004] raid6: sse2x1 2440 MB/s [ 1.110013] raid6: sse2x2 3178 MB/s [ 1.280007] raid6: sse2x4 3705 MB/s [ 1.280120] raid6: using algorithm sse2x4 (3705 MB/s) [ 1.280237] initcall raid6_select_algo+0x0/0x1bd returned 0 after 1162109 usecs [ 1.280435] calling pci_slot_init+0x0/0x46 @ 1 [ 1.280551] initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs [ 1.280668] calling acpi_init+0x0/0xb6 @ 1 [ 1.283139] ACPI: EC: Look up EC in DSDT [ 1.295082] ACPI: Interpreter enabled [ 1.295202] ACPI: (supports S0 S5) [ 1.295388] ACPI: Using IOAPIC for interrupt routing [ 1.305848] initcall acpi_init+0x0/0xb6 returned 0 after 19531 usecs [ 1.305968] calling dock_init+0x0/0xa5 @ 1 [ 1.306336] ACPI: No dock devices found. [ 1.306451] initcall dock_init+0x0/0xa5 returned 0 after 0 usecs [ 1.306569] calling acpi_pci_root_init+0x0/0x28 @ 1 [ 1.306684] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 1.307001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.307392] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 1.307589] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 1.307784] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 1.307981] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 1.308178] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 1.308405] pci 0000:00:00.0: [1106:0282] type 0 class 0x000600 [ 1.308532] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 1.308774] pci 0000:00:00.1: [1106:1282] type 0 class 0x000600 [ 1.308964] pci 0000:00:00.2: [1106:2282] type 0 class 0x000600 [ 1.309153] pci 0000:00:00.3: [1106:3282] type 0 class 0x000600 [ 1.309343] pci 0000:00:00.4: [1106:4282] type 0 class 0x000600 [ 1.309537] pci 0000:00:00.7: [1106:7282] type 0 class 0x000600 [ 1.309732] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604 [ 1.309922] pci 0000:00:01.0: supports D1 [ 1.310024] pci 0000:00:09.0: [10ec:8139] type 0 class 0x000200 [ 1.310165] pci 0000:00:09.0: reg 10: [io 0xe000-0xe0ff] [ 1.310293] pci 0000:00:09.0: reg 14: [mem 0xfc122000-0xfc1220ff] [ 1.310472] pci 0000:00:09.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.310619] pci 0000:00:09.0: supports D1 D2 [ 1.310731] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold [ 1.310851] pci 0000:00:09.0: PME# disabled [ 1.311003] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104 [ 1.311145] pci 0000:00:0f.0: reg 10: [io 0xe200-0xe207] [ 1.311273] pci 0000:00:0f.0: reg 14: [io 0xe300-0xe303] [ 1.311401] pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407] [ 1.311529] pci 0000:00:0f.0: reg 1c: [io 0xe500-0xe503] [ 1.313837] pci 0000:00:0f.0: reg 20: [io 0xe600-0xe60f] [ 1.313964] pci 0000:00:0f.0: reg 24: [io 0xe700-0xe7ff] [ 1.314153] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101 [ 1.314348] pci 0000:00:0f.1: reg 20: [io 0xe800-0xe80f] [ 1.314563] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 1.314754] pci 0000:00:10.0: reg 20: [io 0xe900-0xe91f] [ 1.314924] pci 0000:00:10.0: supports D1 D2 [ 1.315037] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.315157] pci 0000:00:10.0: PME# disabled [ 1.315299] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 1.315492] pci 0000:00:10.1: reg 20: [io 0xea00-0xea1f] [ 1.315663] pci 0000:00:10.1: supports D1 D2 [ 1.315775] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.315895] pci 0000:00:10.1: PME# disabled [ 1.316036] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 [ 1.316229] pci 0000:00:10.2: reg 20: [io 0xeb00-0xeb1f] [ 1.316399] pci 0000:00:10.2: supports D1 D2 [ 1.316512] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.316631] pci 0000:00:10.2: PME# disabled [ 1.316773] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03 [ 1.316964] pci 0000:00:10.3: reg 20: [io 0xec00-0xec1f] [ 1.317133] pci 0000:00:10.3: supports D1 D2 [ 1.317247] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.317366] pci 0000:00:10.3: PME# disabled [ 1.317508] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 [ 1.317649] pci 0000:00:10.4: reg 10: [mem 0xfc121000-0xfc1210ff] [ 1.317867] pci 0000:00:10.4: supports D1 D2 [ 1.317981] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 1.318100] pci 0000:00:10.4: PME# disabled [ 1.318247] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601 [ 1.318466] HPET not enabled in BIOS. You might try hpet=force boot option [ 1.318659] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 1.318842] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 1.319010] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 1.319178] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 1.319355] PCI: peer root bus 00 res updated from pci conf [ 1.319532] pci 0000:01:00.0: [1002:5046] type 0 class 0x000300 [ 1.319672] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 1.319799] pci 0000:01:00.0: reg 14: [io 0xd000-0xd0ff] [ 1.319925] pci 0000:01:00.0: reg 18: [mem 0xfc020000-0xfc023fff] [ 1.320000] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.320014] pci 0000:01:00.0: supports D1 [ 1.320192] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.320309] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.320429] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 1.320549] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref] [ 1.320755] pci_bus 0000:00: on NUMA node 0 [ 1.320869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.321609] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 1.378242] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 68359 usecs [ 1.378363] calling acpi_pci_link_init+0x0/0x3e @ 1 [ 1.378641] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 1.379178] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 1.379724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12) [ 1.380118] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.380752] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.381379] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.382004] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.382629] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.383315] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 1.383684] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 1.384054] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. [ 1.384502] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. [ 1.384801] initcall acpi_pci_link_init+0x0/0x3e returned 0 after 9765 usecs [ 1.384919] calling pnp_init+0x0/0x12 @ 1 [ 1.385090] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs [ 1.385209] calling xen_setup_shutdown_event+0x0/0x22 @ 1 [ 1.385327] initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after 0 usecs [ 1.385523] calling balloon_init+0x0/0x130 @ 1 [ 1.385636] xen/balloon: Initialising balloon driver. [ 1.385751] last_pfn = 0x16fef0 max_arch_pfn = 0x400000000 [ 1.399622] initcall balloon_init+0x0/0x130 returned 0 after 9765 usecs [ 1.399746] calling xenbus_probe_backend_init+0x0/0x2d @ 1 [ 1.400000] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 0 usecs [ 1.400000] calling xenbus_probe_frontend_init+0x0/0x2d @ 1 [ 1.400056] initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after 9765 usecs [ 1.400253] calling balloon_init+0x0/0x100 @ 1 [ 1.400367] xen-balloon: Initialising balloon driver. [ 1.400584] initcall balloon_init+0x0/0x100 returned 0 after 0 usecs [ 1.400701] calling misc_init+0x0/0xb7 @ 1 [ 1.400876] initcall misc_init+0x0/0xb7 returned 0 after 0 usecs [ 1.400993] calling vga_arb_device_init+0x0/0xe4 @ 1 [ 1.401217] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.401413] vgaarb: loaded [ 1.401523] vgaarb: bridge control possible 0000:01:00.0 [ 1.401639] initcall vga_arb_device_init+0x0/0xe4 returned 0 after 0 usecs [ 1.401756] calling init_scsi+0x0/0x7c @ 1 [ 1.402126] SCSI subsystem initialized [ 1.402241] initcall init_scsi+0x0/0x7c returned 0 after 0 usecs [ 1.402358] calling ata_init+0x0/0x349 @ 1 [ 1.402655] libata version 3.00 loaded. [ 1.402770] initcall ata_init+0x0/0x349 returned 0 after 0 usecs [ 1.402890] calling usb_init+0x0/0x15f @ 1 [ 1.403126] usbcore: registered new interface driver usbfs [ 1.403344] usbcore: registered new interface driver hub [ 1.403534] usbcore: registered new device driver usb [ 1.403651] initcall usb_init+0x0/0x15f returned 0 after 0 usecs [ 1.403767] calling serio_init+0x0/0x31 @ 1 [ 1.403933] initcall serio_init+0x0/0x31 returned 0 after 0 usecs [ 1.404050] calling input_init+0x0/0x10c @ 1 [ 1.404218] initcall input_init+0x0/0x10c returned 0 after 0 usecs [ 1.404336] calling rtc_init+0x0/0x6a @ 1 [ 1.404498] initcall rtc_init+0x0/0x6a returned 0 after 0 usecs [ 1.404615] calling power_supply_class_init+0x0/0x40 @ 1 [ 1.404778] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs [ 1.404974] calling hwmon_init+0x0/0xee @ 1 [ 1.405138] initcall hwmon_init+0x0/0xee returned 0 after 0 usecs [ 1.405257] calling md_init+0x0/0x144 @ 1 [ 1.405405] initcall md_init+0x0/0x144 returned 0 after 0 usecs [ 1.405521] calling init_soundcore+0x0/0x34 @ 1 [ 1.405690] initcall init_soundcore+0x0/0x34 returned 0 after 0 usecs [ 1.405807] calling alsa_sound_init+0x0/0x90 @ 1 [ 1.405935] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.406053] initcall alsa_sound_init+0x0/0x90 returned 0 after 0 usecs [ 1.406169] calling pci_subsys_init+0x0/0x4d @ 1 [ 1.406282] PCI: Using ACPI for IRQ routing [ 1.406396] PCI: pci_cache_line_size set to 64 bytes [ 1.406628] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 1.406667] reserve RAM buffer: 000000016fef0000 - 000000016fffffff [ 1.406811] initcall pci_subsys_init+0x0/0x4d returned 0 after 0 usecs [ 1.407032] calling proto_init+0x0/0x12 @ 1 [ 1.407149] initcall proto_init+0x0/0x12 returned 0 after 0 usecs [ 1.407266] calling net_dev_init+0x0/0x1d9 @ 1 [ 1.407652] initcall net_dev_init+0x0/0x1d9 returned 0 after 0 usecs [ 1.407771] calling neigh_init+0x0/0x71 @ 1 [ 1.407886] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs [ 1.408002] calling fib_rules_init+0x0/0xa6 @ 1 [ 1.408116] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs [ 1.408233] calling pktsched_init+0x0/0xed @ 1 [ 1.408351] initcall pktsched_init+0x0/0xed returned 0 after 0 usecs [ 1.408468] calling tc_filter_init+0x0/0x4c @ 1 [ 1.408583] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs [ 1.408699] calling tc_action_init+0x0/0x4c @ 1 [ 1.408813] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs [ 1.408930] calling genl_init+0x0/0x93 @ 1 [ 1.409056] initcall genl_init+0x0/0x93 returned 0 after 0 usecs [ 1.409174] calling sysctl_init+0x0/0x48 @ 1 [ 1.409290] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs [ 1.409407] calling print_ICs+0x0/0x510 @ 1 [ 1.409520] initcall print_ICs+0x0/0x510 returned 0 after 0 usecs [ 1.409637] calling hpet_late_init+0x0/0xf4 @ 1 [ 1.409753] initcall hpet_late_init+0x0/0xf4 returned -19 after 0 usecs [ 1.409870] calling init_amd_nbs+0x0/0xba @ 1 [ 1.410000] initcall init_amd_nbs+0x0/0xba returned 0 after 0 usecs [ 1.410000] calling clocksource_done_booting+0x0/0x5a @ 1 [ 1.410000] Switching to clocksource xen [ 1.410015] initcall clocksource_done_booting+0x0/0x5a returned 0 after 9769 usecs [ 1.410213] calling rb_init_debugfs+0x0/0x2f @ 1 [ 1.410332] initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs [ 1.410448] calling tracer_init_debugfs+0x0/0x36b @ 1 [ 1.410632] initcall tracer_init_debugfs+0x0/0x36b returned 0 after 67 usecs [ 1.410749] calling init_trace_printk_function_export+0x0/0x2f @ 1 [ 1.410868] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 1 usecs [ 1.411063] calling event_trace_init+0x0/0x2bd @ 1 [ 1.416385] initcall event_trace_init+0x0/0x2bd returned 0 after 5078 usecs [ 1.416515] calling init_pipe_fs+0x0/0x4c @ 1 [ 1.416653] initcall init_pipe_fs+0x0/0x4c returned 0 after 23 usecs [ 1.416770] calling eventpoll_init+0x0/0xda @ 1 [ 1.416904] initcall eventpoll_init+0x0/0xda returned 0 after 20 usecs [ 1.417021] calling anon_inode_init+0x0/0x12e @ 1 [ 1.417146] initcall anon_inode_init+0x0/0x12e returned 0 after 10 usecs [ 1.417264] calling blk_scsi_ioctl_init+0x0/0x289 @ 1 [ 1.417380] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs [ 1.417498] calling acpi_event_init+0x0/0x52 @ 1 [ 1.417624] initcall acpi_event_init+0x0/0x52 returned 0 after 11 usecs [ 1.417741] calling pnp_system_init+0x0/0x12 @ 1 [ 1.420073] Switched to NOHz mode on CPU #0 [ 1.420317] initcall pnp_system_init+0x0/0x12 returned 0 after 272 usecs [ 1.420437] calling pnpacpi_init+0x0/0x8c @ 1 [ 1.420549] pnp: PnP ACPI init [ 1.420677] ACPI: bus type pnp registered [ 1.421171] pnp 00:00: [mem 0x000d1c00-0x000d3fff] [ 1.421287] pnp 00:00: [mem 0x000f0000-0x000f7fff] [ 1.421400] pnp 00:00: [mem 0x000f8000-0x000fbfff] [ 1.421515] pnp 00:00: [mem 0x000fc000-0x000fffff] [ 1.421629] pnp 00:00: [mem 0x7ff00000-0x7fffffff] [ 1.421742] pnp 00:00: [mem 0x7fef0000-0x7fefffff] [ 1.421858] pnp 00:00: [mem 0xffff0000-0xffffffff] [ 1.421972] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 1.422085] pnp 00:00: [mem 0x00100000-0x7feeffff] [ 1.422200] pnp 00:00: [mem 0xfec00000-0xfec00fff] [ 1.422315] pnp 00:00: [mem 0xfee00000-0xfee00fff] [ 1.422430] pnp 00:00: [mem 0xfff80000-0xfffeffff] [ 1.422665] system 00:00: [mem 0x000d1c00-0x000d3fff] could not be reserved [ 1.422787] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved [ 1.422905] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved [ 1.423023] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 1.423142] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved [ 1.423261] system 00:00: [mem 0x7fef0000-0x7fefffff] could not be reserved [ 1.423379] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 1.423498] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.423617] system 00:00: [mem 0x00100000-0x7feeffff] could not be reserved [ 1.423735] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.423853] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.423970] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved [ 1.424090] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.424347] pnp 00:01: [bus 00-ff] [ 1.424460] pnp 00:01: [io 0x0cf8-0x0cff] [ 1.424574] pnp 00:01: [io 0x0000-0x0cf7 window] [ 1.424689] pnp 00:01: [io 0x0d00-0xffff window] [ 1.424804] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 1.424920] pnp 00:01: [mem 0x000c0000-0x000dffff window] [ 1.425036] pnp 00:01: [mem 0x80000000-0xfebfffff window] [ 1.425267] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.425421] pnp 00:02: [io 0x4000-0x407f] [ 1.425534] pnp 00:02: [io 0x5000-0x500f] [ 1.425739] system 00:02: [io 0x4000-0x407f] has been reserved [ 1.425857] system 00:02: [io 0x5000-0x500f] has been reserved [ 1.425974] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.427373] pnp 00:03: [io 0x0010-0x001f] [ 1.427488] pnp 00:03: [io 0x0022-0x003f] [ 1.427601] pnp 00:03: [io 0x0044-0x005f] [ 1.427712] pnp 00:03: [io 0x0062-0x0063] [ 1.427826] pnp 00:03: [io 0x0065-0x006f] [ 1.427939] pnp 00:03: [io 0x0074-0x007f] [ 1.428052] pnp 00:03: [io 0x0091-0x0093] [ 1.428164] pnp 00:03: [io 0x00a2-0x00bf] [ 1.428278] pnp 00:03: [io 0x00e0-0x00ef] [ 1.428392] pnp 00:03: [io 0x0b78-0x0b7b] [ 1.428505] pnp 00:03: [io 0x0f78-0x0f7b] [ 1.428617] pnp 00:03: [io 0x0a78-0x0a7b] [ 1.428730] pnp 00:03: [io 0x0e78-0x0e7b] [ 1.428843] pnp 00:03: [io 0x0bbc-0x0bbf] [ 1.428959] pnp 00:03: [io 0x0fbc-0x0fbf] [ 1.429073] pnp 00:03: [io 0x04d0-0x04d1] [ 1.429187] pnp 00:03: [io 0x0290-0x0297] [ 1.429425] system 00:03: [io 0x0b78-0x0b7b] has been reserved [ 1.429544] system 00:03: [io 0x0f78-0x0f7b] has been reserved [ 1.429661] system 00:03: [io 0x0a78-0x0a7b] has been reserved [ 1.429778] system 00:03: [io 0x0e78-0x0e7b] has been reserved [ 1.429895] system 00:03: [io 0x0bbc-0x0bbf] has been reserved [ 1.430012] system 00:03: [io 0x0fbc-0x0fbf] has been reserved [ 1.430058] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.430058] system 00:03: [io 0x0290-0x0297] has been reserved [ 1.430058] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.430504] pnp 00:04: [dma 4] [ 1.430618] pnp 00:04: [io 0x0000-0x000f] [ 1.430733] pnp 00:04: [io 0x0080-0x0090] [ 1.430849] pnp 00:04: [io 0x0094-0x009f] [ 1.430963] pnp 00:04: [io 0x00c0-0x00df] [ 1.431164] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.431300] pnp 00:05: [io 0x0070-0x0073] [ 1.431415] xen: registering gsi 8 triggering 1 polarity 0 [ 1.431529] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 1.431642] xen: --> pirq=8 -> irq=8 [ 1.431764] pnp 00:05: [irq 8] [ 1.431961] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.432092] pnp 00:06: [io 0x0061] [ 1.432295] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.432428] pnp 00:07: [io 0x00f0-0x00ff] [ 1.432543] xen: registering gsi 13 triggering 1 polarity 0 [ 1.432659] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 1.432774] xen: --> pirq=13 -> irq=13 [ 1.432890] pnp 00:07: [irq 13] [ 1.433098] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.433428] pnp 00:08: [io 0x03f0-0x03f5] [ 1.433543] pnp 00:08: [io 0x03f7] [ 1.433655] xen: registering gsi 6 triggering 1 polarity 0 [ 1.433771] xen_map_pirq_gsi: returning irq 6 for gsi 6 [ 1.433886] xen: --> pirq=6 -> irq=6 [ 1.434001] pnp 00:08: [irq 6] [ 1.434112] pnp 00:08: [dma 2] [ 1.434333] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.434765] pnp 00:09: [io 0x03f8-0x03ff] [ 1.434880] xen: registering gsi 4 triggering 1 polarity 0 [ 1.434993] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 1.435108] xen: --> pirq=4 -> irq=4 [ 1.435223] pnp 00:09: [irq 4] [ 1.435465] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.435928] pnp 00:0a: [io 0x02f8-0x02ff] [ 1.436042] xen: registering gsi 3 triggering 1 polarity 0 [ 1.436157] xen_map_pirq_gsi: returning irq 3 for gsi 3 [ 1.436270] xen: --> pirq=3 -> irq=3 [ 1.436385] pnp 00:0a: [irq 3] [ 1.436628] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.437323] pnp 00:0b: [io 0x0378-0x037f] [ 1.437436] pnp 00:0b: [io 0x0778-0x077b] [ 1.437550] xen: registering gsi 7 triggering 1 polarity 0 [ 1.437664] xen_map_pirq_gsi: returning irq 7 for gsi 7 [ 1.437778] xen: --> pirq=7 -> irq=7 [ 1.437894] pnp 00:0b: [irq 7] [ 1.438130] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.438414] pnp 00:0c: [io 0x0060] [ 1.438526] pnp 00:0c: [io 0x0064] [ 1.438638] xen: registering gsi 1 triggering 1 polarity 0 [ 1.438753] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 1.438866] xen: --> pirq=1 -> irq=1 [ 1.438983] pnp 00:0c: [irq 1] [ 1.439190] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.439424] pnp: PnP ACPI: found 13 devices [ 1.439536] ACPI: ACPI bus type pnp unregistered [ 1.439651] initcall pnpacpi_init+0x0/0x8c returned 0 after 18651 usecs [ 1.439768] calling chr_dev_init+0x0/0xc1 @ 1 [ 1.445245] initcall chr_dev_init+0x0/0xc1 returned 0 after 5230 usecs [ 1.445371] calling firmware_class_init+0x0/0x19 @ 1 [ 1.445547] initcall firmware_class_init+0x0/0x19 returned 0 after 58 usecs [ 1.445666] calling thermal_init+0x0/0x75 @ 1 [ 1.445836] initcall thermal_init+0x0/0x75 returned 0 after 54 usecs [ 1.445955] calling cpufreq_gov_performance_init+0x0/0x12 @ 1 [ 1.446071] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs [ 1.446268] calling init_acpi_pm_clocksource+0x0/0xe0 @ 1 [ 1.450316] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 1.450435] initcall init_acpi_pm_clocksource+0x0/0xe0 returned -19 after 3956 usecs [ 1.450634] calling pcibios_assign_resources+0x0/0x74 @ 1 [ 1.450773] PCI: max bus depth: 1 pci_try_num: 2 [ 1.450909] pci 0000:00:09.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref] [ 1.451109] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] [ 1.451305] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.451421] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.451543] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 1.451663] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref] [ 1.451876] pci 0000:00:01.0: setting latency timer to 64 [ 1.451993] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 1.452110] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 1.452225] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff] [ 1.452341] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.452455] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] [ 1.452572] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] [ 1.452689] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 1893 usecs [ 1.452884] calling sysctl_core_init+0x0/0x38 @ 1 [ 1.453005] initcall sysctl_core_init+0x0/0x38 returned 0 after 7 usecs [ 1.453122] calling inet_init+0x0/0x286 @ 1 [ 1.453279] NET: Registered protocol family 2 [ 1.453454] IP route cache hash table entries: 16384 (order: 5, 131072 bytes) [ 1.453779] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.454564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.455322] TCP: Hash tables configured (established 65536 bind 65536) [ 1.455443] TCP reno registered [ 1.455557] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.455693] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.455972] initcall inet_init+0x0/0x286 returned 0 after 2668 usecs [ 1.456092] calling af_unix_init+0x0/0x55 @ 1 [ 1.456210] NET: Registered protocol family 1 [ 1.456329] initcall af_unix_init+0x0/0x55 returned 0 after 120 usecs [ 1.456447] calling init_sunrpc+0x0/0x73 @ 1 [ 1.456716] RPC: Registered named UNIX socket transport module. [ 1.456834] RPC: Registered udp transport module. [ 1.456948] RPC: Registered tcp transport module. [ 1.459247] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.459366] initcall init_sunrpc+0x0/0x73 returned 0 after 2736 usecs [ 1.459483] calling pci_apply_final_quirks+0x0/0x106 @ 1 [ 1.459630] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 1.459914] pci 0000:01:00.0: Boot video device [ 1.460031] PCI: CLS 32 bytes, default 64 [ 1.460063] initcall pci_apply_final_quirks+0x0/0x106 returned 0 after 534 usecs [ 1.460063] calling populate_rootfs+0x0/0x9e @ 1 [ 1.460542] initcall populate_rootfs+0x0/0x9e returned 0 after 79 usecs [ 1.460661] calling pci_iommu_init+0x0/0x41 @ 1 [ 1.460776] initcall pci_iommu_init+0x0/0x41 returned 0 after 0 usecs [ 1.460893] calling irqfd_module_init+0x0/0x31 @ 1 [ 1.461079] initcall irqfd_module_init+0x0/0x31 returned 0 after 68 usecs [ 1.461197] calling svm_init+0x0/0x1e @ 1 [ 1.461313] has_svm: svm not available [ 1.461425] kvm: no hardware support [ 1.461538] initcall svm_init+0x0/0x1e returned -95 after 221 usecs [ 1.461656] initcall svm_init+0x0/0x1e returned with error code -95 [ 1.461772] calling i8259A_init_ops+0x0/0x21 @ 1 [ 1.461886] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs [ 1.462003] calling vsyscall_init+0x0/0x66 @ 1 [ 1.462121] initcall vsyscall_init+0x0/0x66 returned 0 after 3 usecs [ 1.462237] calling sbf_init+0x0/0xe9 @ 1 [ 1.462349] initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs [ 1.462465] calling init_tsc_clocksource+0x0/0x5f @ 1 [ 1.462585] initcall init_tsc_clocksource+0x0/0x5f returned 0 after 1 usecs [ 1.462703] calling add_rtc_cmos+0x0/0x97 @ 1 [ 1.462819] initcall add_rtc_cmos+0x0/0x97 returned 0 after 2 usecs [ 1.462935] calling i8237A_init_ops+0x0/0x14 @ 1 [ 1.463049] initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs [ 1.463168] calling cache_sysfs_init+0x0/0x64 @ 1 [ 1.463535] initcall cache_sysfs_init+0x0/0x64 returned 0 after 246 usecs [ 1.463654] calling mcheck_init_device+0x0/0x100 @ 1 [ 1.463771] initcall mcheck_init_device+0x0/0x100 returned -5 after 0 usecs [ 1.463889] initcall mcheck_init_device+0x0/0x100 returned with error code -5 [ 1.464086] calling threshold_init_device+0x0/0x4f @ 1 [ 1.464202] initcall threshold_init_device+0x0/0x4f returned 0 after 0 usecs [ 1.464320] calling thermal_throttle_init_device+0x0/0x9b @ 1 [ 1.464437] initcall thermal_throttle_init_device+0x0/0x9b returned 0 after 0 usecs [ 1.464635] calling ioapic_init_ops+0x0/0x14 @ 1 [ 1.464750] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs [ 1.464868] calling add_pcspkr+0x0/0x3a @ 1 [ 1.465050] initcall add_pcspkr+0x0/0x3a returned 0 after 65 usecs [ 1.465167] calling aes_init+0x0/0x12 @ 1 [ 1.465321] initcall aes_init+0x0/0x12 returned 0 after 37 usecs [ 1.465437] calling init+0x0/0x12 @ 1 [ 1.465582] initcall init+0x0/0x12 returned 0 after 30 usecs [ 1.465698] calling ia32_binfmt_init+0x0/0x14 @ 1 [ 1.465814] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs [ 1.465930] calling init_sched_debug_procfs+0x0/0x2c @ 1 [ 1.466049] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 4 usecs [ 1.466243] calling proc_schedstat_init+0x0/0x22 @ 1 [ 1.466359] initcall proc_schedstat_init+0x0/0x22 returned 0 after 1 usecs [ 1.466475] calling proc_execdomains_init+0x0/0x22 @ 1 [ 1.466592] initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs [ 1.466709] calling ioresources_init+0x0/0x3c @ 1 [ 1.466826] initcall ioresources_init+0x0/0x3c returned 0 after 3 usecs [ 1.466942] calling uid_cache_init+0x0/0x8d @ 1 [ 1.467061] initcall uid_cache_init+0x0/0x8d returned 0 after 6 usecs [ 1.467180] calling init_posix_timers+0x0/0x1cf @ 1 [ 1.467300] initcall init_posix_timers+0x0/0x1cf returned 0 after 5 usecs [ 1.467416] calling init_posix_cpu_timers+0x0/0xbf @ 1 [ 1.467531] initcall init_posix_cpu_timers+0x0/0xbf returned 0 after 0 usecs [ 1.467648] calling nsproxy_cache_init+0x0/0x2d @ 1 [ 1.467768] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 5 usecs [ 1.467885] calling timekeeping_init_ops+0x0/0x14 @ 1 [ 1.468001] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs [ 1.468117] calling init_clocksource_sysfs+0x0/0x50 @ 1 [ 1.468332] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 97 usecs [ 1.468529] calling init_timer_list_procfs+0x0/0x2c @ 1 [ 1.468647] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 2 usecs [ 1.468764] calling alarmtimer_init+0x0/0x147 @ 1 [ 1.468991] initcall alarmtimer_init+0x0/0x147 returned 0 after 108 usecs [ 1.469111] calling init_tstats_procfs+0x0/0x2c @ 1 [ 1.469228] initcall init_tstats_procfs+0x0/0x2c returned 0 after 2 usecs [ 1.469346] calling futex_init+0x0/0x5d @ 1 [ 1.469467] initcall futex_init+0x0/0x5d returned 0 after 7 usecs [ 1.469583] calling proc_dma_init+0x0/0x22 @ 1 [ 1.469700] initcall proc_dma_init+0x0/0x22 returned 0 after 2 usecs [ 1.469819] calling proc_modules_init+0x0/0x22 @ 1 [ 1.469936] initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs [ 1.470055] calling kallsyms_init+0x0/0x25 @ 1 [ 1.470171] initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs [ 1.470288] calling ikconfig_init+0x0/0x3a @ 1 [ 1.470405] initcall ikconfig_init+0x0/0x3a returned 0 after 1 usecs [ 1.470472] calling hung_task_init+0x0/0x56 @ 1 [ 1.470672] initcall hung_task_init+0x0/0x56 returned 0 after 32 usecs [ 1.470790] calling utsname_sysctl_init+0x0/0x14 @ 1 [ 1.470907] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 1 usecs [ 1.471024] calling init_tracepoints+0x0/0x12 @ 1 [ 1.471140] initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs [ 1.471257] calling init_lstats_procfs+0x0/0x25 @ 1 [ 1.471373] initcall init_lstats_procfs+0x0/0x25 returned 0 after 2 usecs [ 1.471491] calling init_events+0x0/0x61 @ 1 [ 1.471609] initcall init_events+0x0/0x61 returned 0 after 3 usecs [ 1.471726] calling init_mmio_trace+0x0/0x12 @ 1 [ 1.471842] initcall init_mmio_trace+0x0/0x12 returned 0 after 0 usecs [ 1.471958] calling init_blk_tracer+0x0/0x55 @ 1 [ 1.472073] initcall init_blk_tracer+0x0/0x55 returned 0 after 0 usecs [ 1.472190] calling perf_event_sysfs_init+0x0/0x93 @ 1 [ 1.472537] initcall perf_event_sysfs_init+0x0/0x93 returned 0 after 224 usecs [ 1.472734] calling init_per_zone_wmark_min+0x0/0x88 @ 1 [ 1.473665] initcall init_per_zone_wmark_min+0x0/0x88 returned 0 after 793 usecs [ 1.473866] calling kswapd_init+0x0/0x20 @ 1 [ 1.474038] initcall kswapd_init+0x0/0x20 returned 0 after 56 usecs [ 1.474157] calling extfrag_debug_init+0x0/0x7b @ 1 [ 1.474282] initcall extfrag_debug_init+0x0/0x7b returned 0 after 10 usecs [ 1.474399] calling setup_vmstat+0x0/0xc0 @ 1 [ 1.474531] initcall setup_vmstat+0x0/0xc0 returned 0 after 17 usecs [ 1.474647] calling mm_sysfs_init+0x0/0x29 @ 1 [ 1.474767] initcall mm_sysfs_init+0x0/0x29 returned 0 after 5 usecs [ 1.474884] calling proc_vmalloc_init+0x0/0x25 @ 1 [ 1.475000] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 2 usecs [ 1.475116] calling procswaps_init+0x0/0x22 @ 1 [ 1.475233] initcall procswaps_init+0x0/0x22 returned 0 after 2 usecs [ 1.475350] calling hugetlb_init+0x0/0x3db @ 1 [ 1.475464] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.475590] initcall hugetlb_init+0x0/0x3db returned 0 after 123 usecs [ 1.475708] calling slab_proc_init+0x0/0x25 @ 1 [ 1.475824] initcall slab_proc_init+0x0/0x25 returned 0 after 2 usecs [ 1.475939] calling cpucache_init+0x0/0x40 @ 1 [ 1.476053] initcall cpucache_init+0x0/0x40 returned 0 after 0 usecs [ 1.476169] calling hugepage_init+0x0/0x12a @ 1 [ 1.476282] initcall hugepage_init+0x0/0x12a returned -22 after 0 usecs [ 1.476400] initcall hugepage_init+0x0/0x12a returned with error code -22 [ 1.476516] calling init_cleancache+0x0/0x1b @ 1 [ 1.476633] initcall init_cleancache+0x0/0x1b returned 0 after 3 usecs [ 1.476750] calling fcntl_init+0x0/0x2a @ 1 [ 1.476879] initcall fcntl_init+0x0/0x2a returned 0 after 15 usecs [ 1.476995] calling proc_filesystems_init+0x0/0x22 @ 1 [ 1.477112] initcall proc_filesystems_init+0x0/0x22 returned 0 after 2 usecs [ 1.477228] calling fsnotify_mark_init+0x0/0x40 @ 1 [ 1.477373] initcall fsnotify_mark_init+0x0/0x40 returned 0 after 28 usecs [ 1.477489] calling dnotify_init+0x0/0x7b @ 1 [ 1.477611] initcall dnotify_init+0x0/0x7b returned 0 after 9 usecs [ 1.477726] calling inotify_user_setup+0x0/0x70 @ 1 [ 1.477850] initcall inotify_user_setup+0x0/0x70 returned 0 after 10 usecs [ 1.477966] calling aio_setup+0x0/0x78 @ 1 [ 1.478092] initcall aio_setup+0x0/0x78 returned 0 after 13 usecs [ 1.478207] calling proc_locks_init+0x0/0x22 @ 1 [ 1.478325] initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs [ 1.478442] calling init_sys32_ioctl+0x0/0x28 @ 1 [ 1.478643] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 85 usecs [ 1.478759] calling init_mbcache+0x0/0x14 @ 1 [ 1.478874] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs [ 1.478990] calling proc_cmdline_init+0x0/0x22 @ 1 [ 1.479106] initcall proc_cmdline_init+0x0/0x22 returned 0 after 2 usecs [ 1.479229] calling proc_consoles_init+0x0/0x22 @ 1 [ 1.479346] initcall proc_consoles_init+0x0/0x22 returned 0 after 2 usecs [ 1.479462] calling proc_cpuinfo_init+0x0/0x22 @ 1 [ 1.479581] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs [ 1.479698] calling proc_devices_init+0x0/0x22 @ 1 [ 1.479814] initcall proc_devices_init+0x0/0x22 returned 0 after 2 usecs [ 1.479930] calling proc_interrupts_init+0x0/0x22 @ 1 [ 1.480046] initcall proc_interrupts_init+0x0/0x22 returned 0 after 2 usecs [ 1.480165] calling proc_loadavg_init+0x0/0x22 @ 1 [ 1.480281] initcall proc_loadavg_init+0x0/0x22 returned 0 after 1 usecs [ 1.480397] calling proc_meminfo_init+0x0/0x22 @ 1 [ 1.480512] initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs [ 1.480629] calling proc_stat_init+0x0/0x22 @ 1 [ 1.480641] initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs [ 1.480641] calling proc_uptime_init+0x0/0x22 @ 1 [ 1.480641] initcall proc_uptime_init+0x0/0x22 returned 0 after 1 usecs [ 1.480641] calling proc_version_init+0x0/0x22 @ 1 [ 1.480641] initcall proc_version_init+0x0/0x22 returned 0 after 1 usecs [ 1.480641] calling proc_softirqs_init+0x0/0x22 @ 1 [ 1.480641] initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs [ 1.480641] calling proc_kcore_init+0x0/0xa9 @ 1 [ 1.480641] initcall proc_kcore_init+0x0/0xa9 returned 0 after 4 usecs [ 1.480641] calling proc_kmsg_init+0x0/0x25 @ 1 [ 1.481926] initcall proc_kmsg_init+0x0/0x25 returned 0 after 22 usecs [ 1.482044] calling proc_page_init+0x0/0x42 @ 1 [ 1.482165] initcall proc_page_init+0x0/0x42 returned 0 after 4 usecs [ 1.484463] calling configfs_init+0x0/0xb3 @ 1 [ 1.484597] initcall configfs_init+0x0/0xb3 returned 0 after 17 usecs [ 1.484714] calling init_devpts_fs+0x0/0x4c @ 1 [ 1.484844] initcall init_devpts_fs+0x0/0x4c returned 0 after 15 usecs [ 1.484961] calling init_ext3_fs+0x0/0x6f @ 1 [ 1.485089] initcall init_ext3_fs+0x0/0x6f returned 0 after 12 usecs [ 1.485206] calling init_ext2_fs+0x0/0x6f @ 1 [ 1.485335] initcall init_ext2_fs+0x0/0x6f returned 0 after 13 usecs [ 1.485453] calling ext4_init_fs+0x0/0x20c @ 1 [ 1.485621] initcall ext4_init_fs+0x0/0x20c returned 0 after 49 usecs [ 1.485739] calling journal_init+0x0/0x97 @ 1 [ 1.485877] initcall journal_init+0x0/0x97 returned 0 after 20 usecs [ 1.485994] calling journal_init+0x0/0x104 @ 1 [ 1.486136] initcall journal_init+0x0/0x104 returned 0 after 25 usecs [ 1.486253] calling init_squashfs_fs+0x0/0x66 @ 1 [ 1.486373] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.486492] initcall init_squashfs_fs+0x0/0x66 returned 0 after 120 usecs [ 1.486609] calling init_ramfs_fs+0x0/0x12 @ 1 [ 1.486726] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs [ 1.486843] calling init_hugetlbfs_fs+0x0/0x98 @ 1 [ 1.486987] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 28 usecs [ 1.487106] calling init_fat_fs+0x0/0x4f @ 1 [ 1.487231] initcall init_fat_fs+0x0/0x4f returned 0 after 9 usecs [ 1.487347] calling init_vfat_fs+0x0/0x12 @ 1 [ 1.487462] initcall init_vfat_fs+0x0/0x12 returned 0 after 1 usecs [ 1.487579] calling init_iso9660_fs+0x0/0x5c @ 1 [ 1.487700] initcall init_iso9660_fs+0x0/0x5c returned 0 after 5 usecs [ 1.487818] calling init_nfs_fs+0x0/0x10e @ 1 [ 1.488048] initcall init_nfs_fs+0x0/0x10e returned 0 after 111 usecs [ 1.488165] calling init_nfsd+0x0/0xbb @ 1 [ 1.488278] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.488694] initcall init_nfsd+0x0/0xbb returned 0 after 404 usecs [ 1.488810] calling init_nlm+0x0/0x22 @ 1 [ 1.488925] initcall init_nlm+0x0/0x22 returned 0 after 1 usecs [ 1.489041] calling init_nls_cp437+0x0/0x12 @ 1 [ 1.489157] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs [ 1.489276] calling init_nls_cp850+0x0/0x12 @ 1 [ 1.489391] initcall init_nls_cp850+0x0/0x12 returned 0 after 0 usecs [ 1.489508] calling init_nls_cp932+0x0/0x12 @ 1 [ 1.489622] initcall init_nls_cp932+0x0/0x12 returned 0 after 0 usecs [ 1.489740] calling init_nls_euc_jp+0x0/0x48 @ 1 [ 1.489856] initcall init_nls_euc_jp+0x0/0x48 returned 0 after 0 usecs [ 1.489975] calling init_nls_iso8859_1+0x0/0x12 @ 1 [ 1.490091] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs [ 1.490207] calling init_nls_iso8859_15+0x0/0x12 @ 1 [ 1.490322] initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0 usecs [ 1.490439] calling init_nls_utf8+0x0/0x29 @ 1 [ 1.490554] initcall init_nls_utf8+0x0/0x29 returned 0 after 0 usecs [ 1.490670] calling init_ntfs_fs+0x0/0x1d1 @ 1 [ 1.490783] NTFS driver 2.1.30 [Flags: R/W]. [ 1.490931] initcall init_ntfs_fs+0x0/0x1d1 returned 0 after 143 usecs [ 1.491048] calling init_autofs4_fs+0x0/0x26 @ 1 [ 1.491274] initcall init_autofs4_fs+0x0/0x26 returned 0 after 108 usecs [ 1.491391] calling fuse_init+0x0/0x141 @ 1 [ 1.491503] fuse init (API version 7.16) [ 1.491702] initcall fuse_init+0x0/0x141 returned 0 after 193 usecs [ 1.491820] calling init_udf_fs+0x0/0x5c @ 1 [ 1.491942] initcall init_udf_fs+0x0/0x5c returned 0 after 6 usecs [ 1.492057] calling init_xfs_fs+0x0/0xa9 @ 1 [ 1.492170] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 1.492597] initcall init_xfs_fs+0x0/0xa9 returned 0 after 414 usecs [ 1.492716] calling ipc_init+0x0/0x23 @ 1 [ 1.492831] msgmni has been set to 284 [ 1.492950] initcall ipc_init+0x0/0x23 returned 0 after 117 usecs [ 1.493066] calling ipc_sysctl_init+0x0/0x14 @ 1 [ 1.493182] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 1 usecs [ 1.493298] calling key_proc_init+0x0/0x33 @ 1 [ 1.493414] initcall key_proc_init+0x0/0x33 returned 0 after 2 usecs [ 1.493530] calling crypto_wq_init+0x0/0x31 @ 1 [ 1.493673] initcall crypto_wq_init+0x0/0x31 returned 0 after 27 usecs [ 1.493791] calling crypto_algapi_init+0x0/0xd @ 1 [ 1.493908] initcall crypto_algapi_init+0x0/0xd returned 0 after 3 usecs [ 1.494025] calling skcipher_module_init+0x0/0x36 @ 1 [ 1.494141] initcall skcipher_module_init+0x0/0x36 returned 0 after 0 usecs [ 1.494259] calling chainiv_module_init+0x0/0x12 @ 1 [ 1.494376] initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.494492] calling eseqiv_module_init+0x0/0x12 @ 1 [ 1.494607] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.494725] calling seqiv_module_init+0x0/0x12 @ 1 [ 1.494841] initcall seqiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.494957] calling hmac_module_init+0x0/0x12 @ 1 [ 1.495070] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.495189] calling md5_mod_init+0x0/0x12 @ 1 [ 1.495343] initcall md5_mod_init+0x0/0x12 returned 0 after 37 usecs [ 1.495459] calling sha1_generic_mod_init+0x0/0x12 @ 1 [ 1.495608] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 33 usecs [ 1.495726] calling sha256_generic_mod_init+0x0/0x3f @ 1 [ 1.495905] initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 62 usecs [ 1.496101] calling crypto_cbc_module_init+0x0/0x12 @ 1 [ 1.496216] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.496335] calling crypto_ctr_module_init+0x0/0x3e @ 1 [ 1.496450] initcall crypto_ctr_module_init+0x0/0x3e returned 0 after 0 usecs [ 1.496566] calling cryptd_init+0x0/0xc5 @ 1 [ 1.496683] initcall cryptd_init+0x0/0xc5 returned 0 after 3 usecs [ 1.496798] calling des_generic_mod_init+0x0/0x3f @ 1 [ 1.496977] initcall des_generic_mod_init+0x0/0x3f returned 0 after 62 usecs [ 1.497094] calling blowfish_mod_init+0x0/0x12 @ 1 [ 1.497240] initcall blowfish_mod_init+0x0/0x12 returned 0 after 31 usecs [ 1.497357] calling aes_init+0x0/0x12 @ 1 [ 1.497502] initcall aes_init+0x0/0x12 returned 0 after 30 usecs [ 1.497617] calling krng_mod_init+0x0/0x12 @ 1 [ 1.497763] initcall krng_mod_init+0x0/0x12 returned 0 after 31 usecs [ 1.497880] calling async_pq_init+0x0/0x44 @ 1 [ 1.497995] initcall async_pq_init+0x0/0x44 returned 0 after 1 usecs [ 1.498112] calling proc_genhd_init+0x0/0x3c @ 1 [ 1.498231] initcall proc_genhd_init+0x0/0x3c returned 0 after 5 usecs [ 1.498347] calling init_cgroup_blkio+0x0/0x12 @ 1 [ 1.498462] initcall init_cgroup_blkio+0x0/0x12 returned 0 after 0 usecs [ 1.498578] calling throtl_init+0x0/0x44 @ 1 [ 1.498719] initcall throtl_init+0x0/0x44 returned 0 after 25 usecs [ 1.498836] calling noop_init+0x0/0x14 @ 1 [ 1.498948] io scheduler noop registered [ 1.499062] initcall noop_init+0x0/0x14 returned 0 after 111 usecs [ 1.499179] calling deadline_init+0x0/0x14 @ 1 [ 1.499292] io scheduler deadline registered [ 1.499405] initcall deadline_init+0x0/0x14 returned 0 after 109 usecs [ 1.499521] calling cfq_init+0x0/0xb3 @ 1 [ 1.499646] io scheduler cfq registered (default) [ 1.499762] initcall cfq_init+0x0/0xb3 returned 0 after 124 usecs [ 1.499877] calling init_kmp+0x0/0x12 @ 1 [ 1.499992] initcall init_kmp+0x0/0x12 returned 0 after 0 usecs [ 1.500109] calling init_bm+0x0/0x12 @ 1 [ 1.500222] initcall init_bm+0x0/0x12 returned 0 after 0 usecs [ 1.500336] calling init_fsm+0x0/0x12 @ 1 [ 1.500450] initcall init_fsm+0x0/0x12 returned 0 after 0 usecs [ 1.500565] calling percpu_counter_startup+0x0/0x19 @ 1 [ 1.500680] initcall percpu_counter_startup+0x0/0x19 returned 0 after 0 usecs [ 1.500799] calling pci_proc_init+0x0/0x6b @ 1 [ 1.500993] initcall pci_proc_init+0x0/0x6b returned 0 after 78 usecs [ 1.501111] calling pcie_portdrv_init+0x0/0x7a @ 1 [ 1.501363] initcall pcie_portdrv_init+0x0/0x7a returned 0 after 132 usecs [ 1.501480] calling aer_service_init+0x0/0x22 @ 1 [ 1.501642] initcall aer_service_init+0x0/0x22 returned 0 after 46 usecs [ 1.501759] calling pcie_pme_service_init+0x0/0x12 @ 1 [ 1.501923] initcall pcie_pme_service_init+0x0/0x12 returned 0 after 47 usecs [ 1.502041] calling ioapic_init+0x0/0x1b @ 1 [ 1.502212] initcall ioapic_init+0x0/0x1b returned 0 after 55 usecs [ 1.502330] calling pcifront_init+0x0/0x5c @ 1 [ 1.502444] initcall pcifront_init+0x0/0x5c returned -19 after 0 usecs [ 1.502560] calling acpi_reserve_resources+0x0/0xeb @ 1 [ 1.502679] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs [ 1.502796] calling irqrouter_init_ops+0x0/0x26 @ 1 [ 1.502912] initcall irqrouter_init_ops+0x0/0x26 returned 0 after 0 usecs [ 1.503030] calling acpi_button_init+0x0/0x12 @ 1 [ 1.503263] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.503463] ACPI: Power Button [PWRB] [ 1.503701] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.503897] ACPI: Power Button [PWRF] [ 1.504069] initcall acpi_button_init+0x0/0x12 returned 0 after 901 usecs [ 1.504188] calling acpi_fan_init+0x0/0x18 @ 1 [ 1.504355] initcall acpi_fan_init+0x0/0x18 returned 0 after 51 usecs [ 1.504474] calling acpi_pci_slot_init+0x0/0x20 @ 1 [ 1.504931] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 335 usecs [ 1.505048] calling acpi_processor_init+0x0/0xcd @ 1 [ 1.505162] ACPI: acpi_idle registered with cpuidle [ 1.505471] initcall acpi_processor_init+0x0/0xcd returned 0 after 300 usecs [ 1.505589] calling acpi_container_init+0x0/0x4a @ 1 [ 1.509054] initcall acpi_container_init+0x0/0x4a returned 0 after 3269 usecs [ 1.509172] calling acpi_thermal_init+0x0/0x42 @ 1 [ 1.509350] initcall acpi_thermal_init+0x0/0x42 returned 0 after 60 usecs [ 1.509468] calling xenbus_probe_initcall+0x0/0x3b @ 1 [ 1.509584] initcall xenbus_probe_initcall+0x0/0x3b returned 0 after 0 usecs [ 1.509704] calling xen_tmem_init+0x0/0x5c @ 1 [ 1.509818] initcall xen_tmem_init+0x0/0x5c returned 0 after 0 usecs [ 1.509935] calling evtchn_init+0x0/0x6e @ 1 [ 1.510180] Event-channel device installed. [ 1.510294] initcall evtchn_init+0x0/0x6e returned 0 after 238 usecs [ 1.510412] calling xenfs_init+0x0/0x2d @ 1 [ 1.510529] initcall xenfs_init+0x0/0x2d returned 0 after 3 usecs [ 1.510646] calling hypervisor_subsys_init+0x0/0x25 @ 1 [ 1.510762] initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs [ 1.510879] calling hyper_sysfs_init+0x0/0xbf @ 1 [ 1.511006] initcall hyper_sysfs_init+0x0/0xbf returned 0 after 12 usecs [ 1.511122] calling pty_init+0x0/0x26a @ 1 [ 1.511331] initcall pty_init+0x0/0x26a returned 0 after 92 usecs [ 1.511446] calling sysrq_init+0x0/0x68 @ 1 [ 1.513746] initcall sysrq_init+0x0/0x68 returned 0 after 6 usecs [ 1.513864] calling xen_hvc_init+0x0/0x144 @ 1 [ 1.514566] initcall xen_hvc_init+0x0/0x144 returned 0 after 572 usecs [ 1.514684] calling serial8250_init+0x0/0x18e @ 1 [ 1.514799] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 1.520093] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.535996] initcall serial8250_init+0x0/0x18e returned 0 after 20698 usecs [ 1.536114] calling serial8250_pnp_init+0x0/0x12 @ 1 [ 1.545863] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.557484] serial 00:0a: disabled [ 1.557664] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 20931 usecs [ 1.557861] calling serial8250_pci_init+0x0/0x1b @ 1 [ 1.558065] initcall serial8250_pci_init+0x0/0x1b returned 0 after 85 usecs [ 1.558185] calling rand_initialize+0x0/0x2c @ 1 [ 1.558321] initcall rand_initialize+0x0/0x2c returned 0 after 21 usecs [ 1.558439] calling hpet_init+0x0/0x6a @ 1 [ 1.558683] initcall hpet_init+0x0/0x6a returned 0 after 126 usecs [ 1.558802] calling topology_sysfs_init+0x0/0x50 @ 1 [ 1.558924] initcall topology_sysfs_init+0x0/0x50 returned 0 after 6 usecs [ 1.559041] calling loop_init+0x0/0x231 @ 1 [ 1.560627] loop: module loaded [ 1.560741] initcall loop_init+0x0/0x231 returned 0 after 1547 usecs [ 1.560858] calling init_cryptoloop+0x0/0x2f @ 1 [ 1.560972] initcall init_cryptoloop+0x0/0x2f returned 0 after 0 usecs [ 1.561089] calling xlblk_init+0x0/0x81 @ 1 [ 1.561257] initcall xlblk_init+0x0/0x81 returned 0 after 51 usecs [ 1.561374] calling xen_blkif_init+0x0/0x276 @ 1 [ 1.562142] initcall xen_blkif_init+0x0/0x276 returned 0 after 638 usecs [ 1.562260] calling init_sd+0x0/0x112 @ 1 [ 1.562492] initcall init_sd+0x0/0x112 returned 0 after 113 usecs [ 1.562610] calling init_sr+0x0/0x46 @ 1 [ 1.562773] initcall init_sr+0x0/0x46 returned 0 after 48 usecs [ 1.562891] calling init_sg+0x0/0xc7 @ 1 [ 1.563055] initcall init_sg+0x0/0xc7 returned 0 after 48 usecs [ 1.563171] calling ahci_init+0x0/0x1b @ 1 [ 1.563363] initcall ahci_init+0x0/0x1b returned 0 after 74 usecs [ 1.563481] calling piix_init+0x0/0x29 @ 1 [ 1.563657] initcall piix_init+0x0/0x29 returned 0 after 60 usecs [ 1.563774] calling mv_init+0x0/0x45 @ 1 [ 1.563998] initcall mv_init+0x0/0x45 returned 0 after 106 usecs [ 1.564117] calling nv_init+0x0/0x1b @ 1 [ 1.564290] initcall nv_init+0x0/0x1b returned 0 after 57 usecs [ 1.564408] calling svia_init+0x0/0x1b @ 1 [ 1.564531] sata_via 0000:00:0f.0: version 2.6 [ 1.564891] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 1.565008] xen: registering gsi 20 triggering 0 polarity 1 [ 1.565129] xen: --> pirq=20 -> irq=20 [ 1.565251] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.565502] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.566207] scsi0 : sata_via [ 1.566498] scsi1 : sata_via [ 1.566744] ata1: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe600 irq 20 [ 1.566864] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe500 bmdma 0xe608 irq 20 [ 1.567009] calling 1_async_port_probe+0x0/0x4a @ 5 [ 1.567172] calling 2_async_port_probe+0x0/0x4a @ 12 [ 1.567288] async_waiting @ 12 [ 1.567467] initcall svia_init+0x0/0x1b returned 0 after 2876 usecs [ 1.567585] calling amd_init+0x0/0x1b @ 1 [ 1.567759] initcall amd_init+0x0/0x1b returned 0 after 59 usecs [ 1.567877] calling pdc2027x_init+0x0/0x1b @ 1 [ 1.568049] initcall pdc2027x_init+0x0/0x1b returned 0 after 56 usecs [ 1.568166] calling sil680_init+0x0/0x1b @ 1 [ 1.568336] initcall sil680_init+0x0/0x1b returned 0 after 54 usecs [ 1.568453] calling via_init+0x0/0x1b @ 1 [ 1.568574] pata_via 0000:00:0f.1: version 0.3.4 [ 1.568697] xen: registering gsi 20 triggering 0 polarity 1 [ 1.568812] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.568926] xen: --> pirq=20 -> irq=20 [ 1.569038] Already setup the GSI :20 [ 1.569151] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.570175] scsi2 : pata_via [ 1.570443] scsi3 : pata_via [ 1.573335] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14 [ 1.573454] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15 [ 1.573602] calling 3_async_port_probe+0x0/0x4a @ 579 [ 1.573886] calling 4_async_port_probe+0x0/0x4a @ 580 [ 1.574001] async_waiting @ 580 [ 1.574178] initcall via_init+0x0/0x1b returned 0 after 5479 usecs [ 1.574295] calling e1000_init_module+0x0/0x87 @ 1 [ 1.574410] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.574526] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.574707] initcall e1000_init_module+0x0/0x87 returned 0 after 288 usecs [ 1.574826] calling e1000_init_module+0x0/0x3e @ 1 [ 1.574939] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 1.575053] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.575232] initcall e1000_init_module+0x0/0x3e returned 0 after 284 usecs [ 1.575351] calling e100_init_module+0x0/0x5d @ 1 [ 1.575466] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.575580] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.575758] initcall e100_init_module+0x0/0x5d returned 0 after 283 usecs [ 1.575876] calling net_olddevs_init+0x0/0x9e @ 1 [ 1.575995] initcall net_olddevs_init+0x0/0x9e returned 0 after 4 usecs [ 1.576111] calling ppp_init+0x0/0xe4 @ 1 [ 1.576223] PPP generic driver version 2.4.2 [ 1.576481] initcall ppp_init+0x0/0xe4 returned 0 after 250 usecs [ 1.576599] calling ppp_async_init+0x0/0x36 @ 1 [ 1.576714] initcall ppp_async_init+0x0/0x36 returned 0 after 0 usecs [ 1.576833] calling ppp_sync_init+0x0/0x36 @ 1 [ 1.576948] initcall ppp_sync_init+0x0/0x36 returned 0 after 0 usecs [ 1.577064] calling deflate_init+0x0/0x3b @ 1 [ 1.577176] PPP Deflate Compression module registered [ 1.577293] initcall deflate_init+0x0/0x3b returned 0 after 112 usecs [ 1.577409] calling bsdcomp_init+0x0/0x2f @ 1 [ 1.577521] PPP BSD Compression module registered [ 1.577635] initcall bsdcomp_init+0x0/0x2f returned 0 after 110 usecs [ 1.577751] calling pppox_init+0x0/0x12 @ 1 [ 1.577864] NET: Registered protocol family 24 [ 1.577978] initcall pppox_init+0x0/0x12 returned 0 after 110 usecs [ 1.578095] calling pppoe_init+0x0/0x87 @ 1 [ 1.578220] initcall pppoe_init+0x0/0x87 returned 0 after 10 usecs [ 1.578336] calling netif_init+0x0/0x66 @ 1 [ 1.578450] initcall netif_init+0x0/0x66 returned 0 after 0 usecs [ 1.578567] calling netback_init+0x0/0x219 @ 1 [ 1.578831] initcall netback_init+0x0/0x219 returned 0 after 145 usecs [ 1.578951] calling dummy_init_module+0x0/0xaa @ 1 [ 1.579317] initcall dummy_init_module+0x0/0xaa returned 0 after 244 usecs [ 1.579436] calling ifb_init_module+0x0/0xad @ 1 [ 1.579990] initcall ifb_init_module+0x0/0xad returned 0 after 428 usecs [ 1.580062] calling cp_init+0x0/0x1b @ 1 [ 1.580246] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.580364] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.580631] initcall cp_init+0x0/0x1b returned 0 after 396 usecs [ 1.580747] calling rtl8139_init_module+0x0/0x1b @ 1 [ 1.580870] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.580998] xen: registering gsi 17 triggering 0 polarity 1 [ 1.581118] xen: --> pirq=17 -> irq=17 [ 1.581236] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.581839] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xffffc9000001a000, 00:e0:4c:4c:17:fb, IRQ 17 [ 1.582105] initcall rtl8139_init_module+0x0/0x1b returned 0 after 1211 usecs [ 1.582223] calling tun_init+0x0/0x93 @ 1 [ 1.582334] tun: Universal TUN/TAP device driver, 1.6 [ 1.582447] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.582642] initcall tun_init+0x0/0x93 returned 0 after 298 usecs [ 1.582760] calling rtl8169_init_module+0x0/0x1b @ 1 [ 1.582935] initcall rtl8169_init_module+0x0/0x1b returned 0 after 58 usecs [ 1.583054] calling cdc_init+0x0/0x1b @ 1 [ 1.583222] usbcore: registered new interface driver cdc_ether [ 1.583339] initcall cdc_init+0x0/0x1b returned 0 after 167 usecs [ 1.583454] calling cdc_subset_init+0x0/0x1b @ 1 [ 1.583619] usbcore: registered new interface driver cdc_subset [ 1.583736] initcall cdc_subset_init+0x0/0x1b returned 0 after 163 usecs [ 1.583853] calling zaurus_init+0x0/0x1b @ 1 [ 1.584016] usbcore: registered new interface driver zaurus [ 1.584134] initcall zaurus_init+0x0/0x1b returned 0 after 162 usecs [ 1.584250] calling usbnet_init+0x0/0x2b @ 1 [ 1.584368] initcall usbnet_init+0x0/0x2b returned 0 after 3 usecs [ 1.584484] calling cdc_ncm_init+0x0/0x29 @ 1 [ 1.584596] cdc_ncm: 01-June-2011 [ 1.584761] usbcore: registered new interface driver cdc_ncm [ 1.584878] initcall cdc_ncm_init+0x0/0x29 returned 0 after 273 usecs [ 1.584995] calling de_init+0x0/0x1b @ 1 [ 1.585166] initcall de_init+0x0/0x1b returned 0 after 55 usecs [ 1.585284] calling tulip_init+0x0/0x33 @ 1 [ 1.585459] initcall tulip_init+0x0/0x33 returned 0 after 59 usecs [ 1.585577] calling de4x5_module_init+0x0/0x1b @ 1 [ 1.585748] initcall de4x5_module_init+0x0/0x1b returned 0 after 53 usecs [ 1.585865] calling init_netconsole+0x0/0x23e @ 1 [ 1.585981] netconsole: local port 25360 [ 1.586093] netconsole: local IP 85.10.200.103 [ 1.586205] netconsole: interface ''eth0'' [ 1.586318] netconsole: remote port 514 [ 1.586430] netconsole: remote IP 217.160.215.119 [ 1.586543] netconsole: remote ethernet address 00:26:88:75:cf:27 [ 1.586658] netconsole: device eth0 not up yet, forcing it [ 1.586942] 8139too 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1.587260] netconsole: carrier detect appears untrustworthy, waiting 4 seconds [ 1.742464] async_waiting @ 579 [ 1.770068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.970465] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 1.970585] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.990444] ata1.00: configured for UDMA/133 [ 1.990567] async_waiting @ 5 [ 1.990678] async_continuing @ 5 after 0 usec [ 1.993138] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 1.993608] calling 5_sd_probe_async+0x0/0x1b9 @ 599 [ 1.993794] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.994088] sd 0:0:0:0: [sda] Write Protect is off [ 1.994202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.994356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 1.995147] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.995271] initcall 1_async_port_probe+0x0/0x4a returned 0 after 418111 usecs [ 1.995482] async_continuing @ 12 after 418050 usec [ 2.011474] sda: sda1 sda2 sda3 sda4 < sda5 > [ 2.013823] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.013946] initcall 5_sd_probe_async+0x0/0x1b9 returned 0 after 19744 usecs [ 2.200077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.380461] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 2.380577] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.400468] ata2.00: configured for UDMA/133 [ 2.400596] async_waiting @ 12 [ 2.400709] async_continuing @ 12 after 0 usec [ 2.400929] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 2.401365] calling 6_sd_probe_async+0x0/0x1b9 @ 599 [ 2.401536] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.401825] sd 1:0:0:0: [sdb] Write Protect is off [ 2.401941] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.402095] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 2.402811] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.402935] initcall 2_async_port_probe+0x0/0x4a returned 0 after 816059 usecs [ 2.403137] async_continuing @ 579 after 645080 usec [ 2.403253] initcall 3_async_port_probe+0x0/0x4a returned 0 after 810093 usecs [ 2.403453] async_continuing @ 580 after 809903 usec [ 2.411851] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [ 2.412641] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.412759] initcall 6_sd_probe_async+0x0/0x1b9 returned 0 after 11011 usecs [ 2.572527] async_waiting @ 580 [ 2.572641] async_continuing @ 580 after 0 usec [ 2.572757] initcall 4_async_port_probe+0x0/0x4a returned 0 after 975345 usecs [ 5.600087] console [netcon0] enabled [ 5.600087] netconsole: network logging started [ 5.600087] initcall init_netconsole+0x0/0x23e returned 0 after 3950957 usecs [ 5.600087] calling cdrom_init+0x0/0xd @ 1 [ 5.600087] initcall cdrom_init+0x0/0xd returned 0 after 5 usecs [ 5.600087] calling mon_init+0x0/0xfc @ 1 [ 5.632465] initcall mon_init+0x0/0xfc returned 0 after 159 usecs [ 5.632585] calling ehci_hcd_init+0x0/0x78 @ 1 [ 5.632704] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver [ 5.633099] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 5.633220] xen: registering gsi 21 triggering 0 polarity 1 [ 5.633350] xen: --> pirq=21 -> irq=21 [ 5.633490] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.633726] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 5.633930] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 5.634263] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfc121000 [ 5.650086] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 5.650427] hub 1-0:1.0: USB hub found [ 5.650548] hub 1-0:1.0: 8 ports detected [ 5.650883] initcall ehci_hcd_init+0x0/0x78 returned 0 after 17750 usecs [ 5.651005] calling ohci_hcd_mod_init+0x0/0x54 @ 1 [ 5.651122] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver [ 5.651300] initcall ohci_hcd_mod_init+0x0/0x54 returned 0 after 171 usecs [ 5.651421] calling uhci_hcd_init+0x0/0xc6 @ 1 [ 5.651539] uhci_hcd: USB Universal Host Controller Interface driver [ 5.651695] xen: registering gsi 21 triggering 0 polarity 1 [ 5.651813] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.651930] xen: --> pirq=21 -> irq=21 [ 5.652050] Already setup the GSI :21 [ 5.652167] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.652374] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 5.652584] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 5.652822] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e900 [ 5.653219] hub 2-0:1.0: USB hub found [ 5.653340] hub 2-0:1.0: 2 ports detected [ 5.653619] xen: registering gsi 21 triggering 0 polarity 1 [ 5.653736] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.653854] xen: --> pirq=21 -> irq=21 [ 5.653975] Already setup the GSI :21 [ 5.654092] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.654298] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 5.654496] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 5.654736] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000ea00 [ 5.655122] hub 3-0:1.0: USB hub found [ 5.655243] hub 3-0:1.0: 2 ports detected [ 5.655518] xen: registering gsi 21 triggering 0 polarity 1 [ 5.655636] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.655753] xen: --> pirq=21 -> irq=21 [ 5.655872] Already setup the GSI :21 [ 5.655991] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.656199] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 5.656402] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 5.656640] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000eb00 [ 5.657022] hub 4-0:1.0: USB hub found [ 5.657143] hub 4-0:1.0: 2 ports detected [ 5.657419] xen: registering gsi 21 triggering 0 polarity 1 [ 5.657538] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.657656] xen: --> pirq=21 -> irq=21 [ 5.657778] Already setup the GSI :21 [ 5.657894] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.658100] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 5.658309] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 5.658549] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00 [ 5.658934] hub 5-0:1.0: USB hub found [ 5.659055] hub 5-0:1.0: 2 ports detected [ 5.659379] initcall uhci_hcd_init+0x0/0xc6 returned 0 after 7654 usecs [ 5.659501] calling acm_init+0x0/0xfd @ 1 [ 5.659692] usbcore: registered new interface driver cdc_acm [ 5.659813] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5.660016] initcall acm_init+0x0/0xfd returned 0 after 388 usecs [ 5.660057] calling usblp_init+0x0/0x1b @ 1 [ 5.660337] usbcore: registered new interface driver usblp [ 5.660460] initcall usblp_init+0x0/0x1b returned 0 after 199 usecs [ 5.660581] calling usb_serial_init+0x0/0x1e5 @ 1 [ 5.660822] usbcore: registered new interface driver usbserial [ 5.660997] USB Serial support registered for generic [ 5.661175] usbcore: registered new interface driver usbserial_generic [ 5.661296] usbserial: USB Serial Driver core [ 5.661416] initcall usb_serial_init+0x0/0x1e5 returned 0 after 699 usecs [ 5.661536] calling pl2303_init+0x0/0x58 @ 1 [ 5.661705] USB Serial support registered for pl2303 [ 5.661888] usbcore: registered new interface driver pl2303 [ 5.662007] pl2303: Prolific PL2303 USB to serial adaptor driver [ 5.662129] initcall pl2303_init+0x0/0x58 returned 0 after 464 usecs [ 5.662249] calling i8042_init+0x0/0x3a2 @ 1 [ 5.662498] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.662620] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.663067] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.663286] initcall i8042_init+0x0/0x3a2 returned 0 after 897 usecs [ 5.663409] calling serport_init+0x0/0x34 @ 1 [ 5.663529] initcall serport_init+0x0/0x34 returned 0 after 0 usecs [ 5.663649] calling mousedev_init+0x0/0x8e @ 1 [ 5.663948] mousedev: PS/2 mouse device common for all mice [ 5.664070] initcall mousedev_init+0x0/0x8e returned 0 after 295 usecs [ 5.664189] calling joydev_init+0x0/0x12 @ 1 [ 5.664307] initcall joydev_init+0x0/0x12 returned 0 after 1 usecs [ 5.664426] calling evdev_init+0x0/0x12 @ 1 [ 5.664753] initcall evdev_init+0x0/0x12 returned 0 after 145 usecs [ 5.664873] calling atkbd_init+0x0/0x27 @ 1 [ 5.665054] initcall atkbd_init+0x0/0x27 returned 0 after 59 usecs [ 5.665173] calling cmos_init+0x0/0x6a @ 1 [ 5.665329] rtc_cmos 00:05: RTC can wake from S4 [ 5.665729] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.665917] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 5.666092] initcall cmos_init+0x0/0x6a returned 0 after 782 usecs [ 5.666212] calling i2c_dev_init+0x0/0xca @ 1 [ 5.666329] i2c /dev entries driver [ 5.666502] initcall i2c_dev_init+0x0/0xca returned 0 after 166 usecs [ 5.666622] calling i2c_piix4_init+0x0/0x1b @ 1 [ 5.666805] initcall i2c_piix4_init+0x0/0x1b returned 0 after 62 usecs [ 5.666926] calling sm_it87_init+0x0/0x3f5 @ 1 [ 5.667077] initcall sm_it87_init+0x0/0x3f5 returned -19 after 32 usecs [ 5.667196] calling k8temp_init+0x0/0x1b @ 1 [ 5.667464] initcall k8temp_init+0x0/0x1b returned 0 after 146 usecs [ 5.667585] calling sm_vt8231_init+0x0/0x1b @ 1 [ 5.667759] initcall sm_vt8231_init+0x0/0x1b returned 0 after 54 usecs [ 5.667879] calling raid_init+0x0/0x12 @ 1 [ 5.667997] md: raid1 personality registered for level 1 [ 5.668116] initcall raid_init+0x0/0x12 returned 0 after 115 usecs [ 5.668234] calling raid5_init+0x0/0x2c @ 1 [ 5.668406] md: raid6 personality registered for level 6 [ 5.668526] md: raid5 personality registered for level 5 [ 5.668645] md: raid4 personality registered for level 4 [ 5.670279] initcall raid5_init+0x0/0x2c returned 0 after 2484 usecs [ 5.670279] calling dm_init+0x0/0x46 @ 1 [ 5.671724] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 5.671926] initcall dm_init+0x0/0x46 returned 0 after 665 usecs [ 5.672047] calling dm_crypt_init+0x0/0x69 @ 1 [ 5.672171] initcall dm_crypt_init+0x0/0x69 returned 0 after 6 usecs [ 5.672290] calling dm_snapshot_init+0x0/0x205 @ 1 [ 5.672505] initcall dm_snapshot_init+0x0/0x205 returned 0 after 39 usecs [ 5.672627] calling dm_mirror_init+0x0/0x79 @ 1 [ 5.672750] initcall dm_mirror_init+0x0/0x79 returned 0 after 5 usecs [ 5.672869] calling dm_dirty_log_init+0x0/0x59 @ 1 [ 5.672986] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 usecs [ 5.673160] calling cpufreq_stats_init+0x0/0x9d @ 1 [ 5.673281] initcall cpufreq_stats_init+0x0/0x9d returned 0 after 2 usecs [ 5.673400] calling cpufreq_gov_dbs_init+0x0/0x5e @ 1 [ 5.673520] initcall cpufreq_gov_dbs_init+0x0/0x5e returned 0 after 1 usecs [ 5.673694] calling init_ladder+0x0/0x12 @ 1 [ 5.673811] cpuidle: using governor ladder [ 5.673927] initcall init_ladder+0x0/0x12 returned 0 after 112 usecs [ 5.674045] calling init_menu+0x0/0x12 @ 1 [ 5.674215] cpuidle: using governor menu [ 5.674332] initcall init_menu+0x0/0x12 returned 0 after 112 usecs [ 5.674449] calling hid_init+0x0/0x4d @ 1 [ 5.674637] initcall hid_init+0x0/0x4d returned 0 after 69 usecs [ 5.674759] calling a4_init+0x0/0x1b @ 1 [ 5.674930] initcall a4_init+0x0/0x1b returned 0 after 51 usecs [ 5.675050] calling apple_init+0x0/0x38 @ 1 [ 5.675223] initcall apple_init+0x0/0x38 returned 0 after 52 usecs [ 5.675343] calling belkin_init+0x0/0x1b @ 1 [ 5.675518] initcall belkin_init+0x0/0x1b returned 0 after 55 usecs [ 5.675638] calling ch_init+0x0/0x1b @ 1 [ 5.675806] initcall ch_init+0x0/0x1b returned 0 after 48 usecs [ 5.675927] calling ch_init+0x0/0x1b @ 1 [ 5.676095] initcall ch_init+0x0/0x1b returned 0 after 49 usecs [ 5.676215] calling cp_init+0x0/0x1b @ 1 [ 5.676386] initcall cp_init+0x0/0x1b returned 0 after 50 usecs [ 5.676508] calling dr_init+0x0/0x1b @ 1 [ 5.676678] initcall dr_init+0x0/0x1b returned 0 after 50 usecs [ 5.676799] calling ez_init+0x0/0x1b @ 1 [ 5.676967] initcall ez_init+0x0/0x1b returned 0 after 50 usecs [ 5.677087] calling gyration_init+0x0/0x1b @ 1 [ 5.677259] initcall gyration_init+0x0/0x1b returned 0 after 50 usecs [ 5.677380] calling ks_init+0x0/0x1b @ 1 [ 5.677563] initcall ks_init+0x0/0x1b returned 0 after 63 usecs [ 5.677684] calling kye_init+0x0/0x1b @ 1 [ 5.677863] initcall kye_init+0x0/0x1b returned 0 after 58 usecs [ 5.677983] calling lg_init+0x0/0x1b @ 1 [ 5.678153] initcall lg_init+0x0/0x1b returned 0 after 49 usecs [ 5.678273] calling ms_init+0x0/0x1b @ 1 [ 5.678450] initcall ms_init+0x0/0x1b returned 0 after 58 usecs [ 5.678570] calling mr_init+0x0/0x1b @ 1 [ 5.678740] initcall mr_init+0x0/0x1b returned 0 after 50 usecs [ 5.678860] calling ntrig_init+0x0/0x1b @ 1 [ 5.679033] initcall ntrig_init+0x0/0x1b returned 0 after 53 usecs [ 5.679153] calling ortek_init+0x0/0x1b @ 1 [ 5.679323] initcall ortek_init+0x0/0x1b returned 0 after 51 usecs [ 5.679443] calling pl_init+0x0/0x1b @ 1 [ 5.679613] initcall pl_init+0x0/0x1b returned 0 after 51 usecs [ 5.679732] calling pl_init+0x0/0x1b @ 1 [ 5.679901] initcall pl_init+0x0/0x1b returned 0 after 51 usecs [ 5.680021] calling samsung_init+0x0/0x1b @ 1 [ 5.680231] initcall samsung_init+0x0/0x1b returned 0 after 85 usecs [ 5.680352] calling sjoy_init+0x0/0x1b @ 1 [ 5.680522] initcall sjoy_init+0x0/0x1b returned 0 after 51 usecs [ 5.680643] calling sony_init+0x0/0x1b @ 1 [ 5.680815] initcall sony_init+0x0/0x1b returned 0 after 52 usecs [ 5.680935] calling sp_init+0x0/0x1b @ 1 [ 5.681115] initcall sp_init+0x0/0x1b returned 0 after 59 usecs [ 5.681237] calling ga_init+0x0/0x1b @ 1 [ 5.681408] initcall ga_init+0x0/0x1b returned 0 after 51 usecs [ 5.681527] calling tm_init+0x0/0x1b @ 1 [ 5.681699] initcall tm_init+0x0/0x1b returned 0 after 52 usecs [ 5.681818] calling ts_init+0x0/0x1b @ 1 [ 5.681990] initcall ts_init+0x0/0x1b returned 0 after 52 usecs [ 5.682110] calling twinhan_init+0x0/0x1b @ 1 [ 5.682283] initcall twinhan_init+0x0/0x1b returned 0 after 52 usecs [ 5.682404] calling zp_init+0x0/0x1b @ 1 [ 5.682594] initcall zp_init+0x0/0x1b returned 0 after 70 usecs [ 5.682713] calling hid_init+0x0/0x79 @ 1 [ 5.682947] usbcore: registered new interface driver usbhid [ 5.683066] usbhid: USB HID core driver [ 5.683185] initcall hid_init+0x0/0x79 returned 0 after 343 usecs [ 5.683304] calling staging_init+0x0/0x8 @ 1 [ 5.683420] initcall staging_init+0x0/0x8 returned 0 after 0 usecs [ 5.683597] calling alsa_hwdep_init+0x0/0x64 @ 1 [ 5.683734] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 16 usecs [ 5.683855] calling alsa_timer_init+0x0/0x146 @ 1 [ 5.684076] initcall alsa_timer_init+0x0/0x146 returned 0 after 98 usecs [ 5.684196] calling alsa_pcm_init+0x0/0x6c @ 1 [ 5.684317] initcall alsa_pcm_init+0x0/0x6c returned 0 after 1 usecs [ 5.684436] calling snd_mem_init+0x0/0x2c @ 1 [ 5.684556] initcall snd_mem_init+0x0/0x2c returned 0 after 4 usecs [ 5.684731] calling patch_realtek_init+0x0/0x12 @ 1 [ 5.684852] initcall patch_realtek_init+0x0/0x12 returned 0 after 0 usecs [ 5.684973] calling patch_cmedia_init+0x0/0x12 @ 1 [ 5.685093] initcall patch_cmedia_init+0x0/0x12 returned 0 after 0 usecs [ 5.685268] calling patch_analog_init+0x0/0x12 @ 1 [ 5.685389] initcall patch_analog_init+0x0/0x12 returned 0 after 0 usecs [ 5.685510] calling patch_sigmatel_init+0x0/0x12 @ 1 [ 5.685629] initcall patch_sigmatel_init+0x0/0x12 returned 0 after 0 usecs [ 5.685807] calling patch_si3054_init+0x0/0x12 @ 1 [ 5.685927] initcall patch_si3054_init+0x0/0x12 returned 0 after 0 usecs [ 5.686047] calling patch_cirrus_init+0x0/0x12 @ 1 [ 5.686167] initcall patch_cirrus_init+0x0/0x12 returned 0 after 0 usecs [ 5.686342] calling patch_ca0110_init+0x0/0x12 @ 1 [ 5.686463] initcall patch_ca0110_init+0x0/0x12 returned 0 after 0 usecs [ 5.686585] calling patch_conexant_init+0x0/0x12 @ 1 [ 5.686703] initcall patch_conexant_init+0x0/0x12 returned 0 after 0 usecs [ 5.686882] calling patch_via_init+0x0/0x12 @ 1 [ 5.687000] initcall patch_via_init+0x0/0x12 returned 0 after 0 usecs [ 5.687120] calling patch_hdmi_init+0x0/0x12 @ 1 [ 5.687240] initcall patch_hdmi_init+0x0/0x12 returned 0 after 0 usecs [ 5.687417] calling alsa_card_azx_init+0x0/0x1b @ 1 [ 5.687611] initcall alsa_card_azx_init+0x0/0x1b returned 0 after 72 usecs [ 5.687732] calling alsa_sound_last_init+0x0/0x6f @ 1 [ 5.687850] ALSA device list: [ 5.687963] No soundcards found. [ 5.688079] initcall alsa_sound_last_init+0x0/0x6f returned 0 after 222 usecs [ 5.688256] calling llc_init+0x0/0x20 @ 1 [ 5.688376] initcall llc_init+0x0/0x20 returned 0 after 0 usecs [ 5.688495] calling snap_init+0x0/0x39 @ 1 [ 5.688626] initcall snap_init+0x0/0x39 returned 0 after 10 usecs [ 5.688747] calling blackhole_module_init+0x0/0x12 @ 1 [ 5.688869] initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs [ 5.688990] calling police_init_module+0x0/0x12 @ 1 [ 5.689166] initcall police_init_module+0x0/0x12 returned 0 after 0 usecs [ 5.689289] calling cbq_module_init+0x0/0x12 @ 1 [ 5.689409] initcall cbq_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.689530] calling htb_module_init+0x0/0x12 @ 1 [ 5.689705] initcall htb_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.689828] calling red_module_init+0x0/0x12 @ 1 [ 5.689946] initcall red_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.690070] calling gred_module_init+0x0/0x12 @ 1 [ 5.690158] initcall gred_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.690158] calling ingress_module_init+0x0/0x12 @ 1 [ 5.690158] initcall ingress_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.690158] calling dsmark_module_init+0x0/0x12 @ 1 [ 5.690158] initcall dsmark_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.690158] calling sfb_module_init+0x0/0x12 @ 1 [ 5.690158] initcall sfb_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.690158] calling sfq_module_init+0x0/0x12 @ 1 [ 5.690158] initcall sfq_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.690158] calling tbf_module_init+0x0/0x12 @ 1 [ 5.690158] initcall tbf_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.690158] calling teql_init+0x0/0xf1 @ 1 [ 5.692330] initcall teql_init+0x0/0xf1 returned 0 after 462 usecs [ 5.692453] calling prio_module_init+0x0/0x12 @ 1 [ 5.692575] initcall prio_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.692697] calling mqprio_module_init+0x0/0x12 @ 1 [ 5.692815] initcall mqprio_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.692993] calling choke_module_init+0x0/0x12 @ 1 [ 5.693113] initcall choke_module_init+0x0/0x12 returned 0 after 0 usecs [ 5.693235] calling init_u32+0x0/0x2e @ 1 [ 5.693351] u32 classifier [ 5.693519] Actions configured [ 5.693636] initcall init_u32+0x0/0x2e returned 0 after 276 usecs [ 5.693755] calling init_route4+0x0/0x12 @ 1 [ 5.693872] initcall init_route4+0x0/0x12 returned 0 after 0 usecs [ 5.694046] calling init_fw+0x0/0x12 @ 1 [ 5.694164] initcall init_fw+0x0/0x12 returned 0 after 0 usecs [ 5.694283] calling init_rsvp+0x0/0x12 @ 1 [ 5.694400] initcall init_rsvp+0x0/0x12 returned 0 after 0 usecs [ 5.694574] calling init_tcindex+0x0/0x12 @ 1 [ 5.694692] initcall init_tcindex+0x0/0x12 returned 0 after 0 usecs [ 5.694812] calling init_rsvp+0x0/0x12 @ 1 [ 5.694928] initcall init_rsvp+0x0/0x12 returned 0 after 0 usecs [ 5.695104] calling init_basic+0x0/0x12 @ 1 [ 5.695222] initcall init_basic+0x0/0x12 returned 0 after 0 usecs [ 5.695342] calling init_cgroup_cls+0x0/0x3c @ 1 [ 5.695461] initcall init_cgroup_cls+0x0/0x3c returned 0 after 0 usecs [ 5.695638] calling nfnetlink_init+0x0/0x27 @ 1 [ 5.695756] Netfilter messages via NETLINK v0.30. [ 5.695887] initcall nfnetlink_init+0x0/0x27 returned 0 after 125 usecs [ 5.696007] calling nfnetlink_queue_init+0x0/0xa4 @ 1 [ 5.696130] initcall nfnetlink_queue_init+0x0/0xa4 returned 0 after 4 usecs [ 5.696251] calling nfnetlink_log_init+0x0/0xd7 @ 1 [ 5.696432] initcall nfnetlink_log_init+0x0/0xd7 returned 0 after 6 usecs [ 5.696556] calling nf_conntrack_standalone_init+0x0/0x12 @ 1 [ 5.696675] nf_conntrack version 0.5.0 (1137 buckets, 4548 max) [ 5.699040] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 2309 usecs [ 5.699302] calling ctnetlink_init+0x0/0x76 @ 1 [ 5.699420] ctnetlink v0.93: registering with nfnetlink. [ 5.699540] initcall ctnetlink_init+0x0/0x76 returned 0 after 115 usecs [ 5.699662] calling nf_conntrack_ftp_init+0x0/0x1a4 @ 1 [ 5.699856] initcall nf_conntrack_ftp_init+0x0/0x1a4 returned 0 after 17 usecs [ 5.700056] calling nf_conntrack_h323_init+0x0/0xd4 @ 1 [ 5.700192] initcall nf_conntrack_h323_init+0x0/0xd4 returned 0 after 17 usecs [ 5.700392] calling nf_conntrack_irc_init+0x0/0x181 @ 1 [ 5.700517] initcall nf_conntrack_irc_init+0x0/0x181 returned 0 after 5 usecs [ 5.700640] calling nf_conntrack_sip_init+0x0/0x1ca @ 1 [ 5.700762] initcall nf_conntrack_sip_init+0x0/0x1ca returned 0 after 1 usecs [ 5.700881] calling xt_init+0x0/0x117 @ 1 [ 5.701054] initcall xt_init+0x0/0x117 returned 0 after 1 usecs [ 5.701173] calling tcpudp_mt_init+0x0/0x17 @ 1 [ 5.701291] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.701410] calling mark_mt_init+0x0/0x40 @ 1 [ 5.701584] initcall mark_mt_init+0x0/0x40 returned 0 after 0 usecs [ 5.701703] calling connmark_mt_init+0x0/0x40 @ 1 [ 5.701821] initcall connmark_mt_init+0x0/0x40 returned 0 after 0 usecs [ 5.701941] calling classify_tg_init+0x0/0x17 @ 1 [ 5.702113] initcall classify_tg_init+0x0/0x17 returned 0 after 0 usecs [ 5.702234] calling dscp_tg_init+0x0/0x17 @ 1 [ 5.702351] initcall dscp_tg_init+0x0/0x17 returned 0 after 0 usecs [ 5.702470] calling hl_tg_init+0x0/0x17 @ 1 [ 5.702641] initcall hl_tg_init+0x0/0x17 returned 0 after 0 usecs [ 5.702761] calling nflog_tg_init+0x0/0x12 @ 1 [ 5.702878] initcall nflog_tg_init+0x0/0x12 returned 0 after 0 usecs [ 5.702997] calling nfqueue_tg_init+0x0/0x17 @ 1 [ 5.703169] initcall nfqueue_tg_init+0x0/0x17 returned 0 after 0 usecs [ 5.703290] calling tcpmss_tg_init+0x0/0x17 @ 1 [ 5.703407] initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs [ 5.703526] calling comment_mt_init+0x0/0x12 @ 1 [ 5.703698] initcall comment_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.703819] calling connbytes_mt_init+0x0/0x12 @ 1 [ 5.703938] initcall connbytes_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.704059] calling connlimit_mt_init+0x0/0x17 @ 1 [ 5.704231] initcall connlimit_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.704353] calling conntrack_mt_init+0x0/0x17 @ 1 [ 5.704473] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.704593] calling dscp_mt_init+0x0/0x17 @ 1 [ 5.704765] initcall dscp_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.704886] calling hashlimit_mt_init+0x0/0x8c @ 1 [ 5.705016] initcall hashlimit_mt_init+0x0/0x8c returned 0 after 10 usecs [ 5.705136] calling helper_mt_init+0x0/0x12 @ 1 [ 5.705310] initcall helper_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.705430] calling hl_mt_init+0x0/0x17 @ 1 [ 5.705548] initcall hl_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.705668] calling length_mt_init+0x0/0x17 @ 1 [ 5.705839] initcall length_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.705960] calling limit_mt_init+0x0/0x12 @ 1 [ 5.706076] initcall limit_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.706196] calling mac_mt_init+0x0/0x12 @ 1 [ 5.706367] initcall mac_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.706487] calling multiport_mt_init+0x0/0x17 @ 1 [ 5.706604] initcall multiport_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.706723] calling xt_osf_init+0x0/0x8d @ 1 [ 5.706894] initcall xt_osf_init+0x0/0x8d returned 0 after 0 usecs [ 5.707015] calling owner_mt_init+0x0/0x12 @ 1 [ 5.707131] initcall owner_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.707250] calling pkttype_mt_init+0x0/0x12 @ 1 [ 5.707422] initcall pkttype_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.707543] calling quota_mt_init+0x0/0x12 @ 1 [ 5.707659] initcall quota_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.707777] calling realm_mt_init+0x0/0x12 @ 1 [ 5.707948] initcall realm_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.708067] calling recent_mt_init+0x0/0x7a @ 1 [ 5.708185] initcall recent_mt_init+0x0/0x7a returned 0 after 2 usecs [ 5.708304] calling state_mt_init+0x0/0x12 @ 1 [ 5.708475] initcall state_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.708594] calling statistic_mt_init+0x0/0x12 @ 1 [ 5.708711] initcall statistic_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.708829] calling string_mt_init+0x0/0x12 @ 1 [ 5.709000] initcall string_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.709119] calling tcpmss_mt_init+0x0/0x17 @ 1 [ 5.709235] initcall tcpmss_mt_init+0x0/0x17 returned 0 after 0 usecs [ 5.709355] calling u32_mt_init+0x0/0x12 @ 1 [ 5.709526] initcall u32_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.709646] calling sysctl_ipv4_init+0x0/0x87 @ 1 [ 5.709772] initcall sysctl_ipv4_init+0x0/0x87 returned 0 after 7 usecs [ 5.709893] calling ipip_init+0x0/0x60 @ 1 [ 5.710063] IPv4 over IPv4 tunneling driver [ 5.710440] initcall ipip_init+0x0/0x60 returned 0 after 366 usecs [ 5.710563] calling init_syncookies+0x0/0x19 @ 1 [ 5.710715] initcall init_syncookies+0x0/0x19 returned 0 after 33 usecs [ 5.710836] calling tunnel4_init+0x0/0x66 @ 1 [ 5.710955] initcall tunnel4_init+0x0/0x66 returned 0 after 0 usecs [ 5.711076] calling ipv4_netfilter_init+0x0/0x12 @ 1 [ 5.711195] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs [ 5.711372] calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1 [ 5.711527] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after 33 usecs [ 5.711728] calling nf_nat_init+0x0/0x111 @ 1 [ 5.711857] initcall nf_nat_init+0x0/0x111 returned 0 after 8 usecs [ 5.711977] calling nf_defrag_init+0x0/0x17 @ 1 [ 5.712097] initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs [ 5.712273] calling nf_nat_ftp_init+0x0/0x1f @ 1 [ 5.712393] initcall nf_nat_ftp_init+0x0/0x1f returned 0 after 0 usecs [ 5.712512] calling init+0x0/0xd7 @ 1 [ 5.712631] initcall init+0x0/0xd7 returned 0 after 0 usecs [ 5.712806] calling nf_nat_irc_init+0x0/0x1f @ 1 [ 5.712925] initcall nf_nat_irc_init+0x0/0x1f returned 0 after 0 usecs [ 5.713046] calling nf_nat_sip_init+0x0/0xa9 @ 1 [ 5.713165] initcall nf_nat_sip_init+0x0/0xa9 returned 0 after 0 usecs [ 5.713342] calling ip_tables_init+0x0/0xaa @ 1 [ 5.713464] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.713584] initcall ip_tables_init+0x0/0xaa returned 0 after 121 usecs [ 5.713705] calling iptable_filter_init+0x0/0x6f @ 1 [ 5.713901] initcall iptable_filter_init+0x0/0x6f returned 0 after 22 usecs [ 5.714025] calling iptable_mangle_init+0x0/0x51 @ 1 [ 5.714155] initcall iptable_mangle_init+0x0/0x51 returned 0 after 9 usecs [ 5.714278] calling nf_nat_standalone_init+0x0/0x59 @ 1 [ 5.714407] initcall nf_nat_standalone_init+0x0/0x59 returned 0 after 8 usecs [ 5.714584] calling ecn_mt_init+0x0/0x12 @ 1 [ 5.714704] initcall ecn_mt_init+0x0/0x12 returned 0 after 0 usecs [ 5.714824] calling ecn_tg_init+0x0/0x12 @ 1 [ 5.714942] initcall ecn_tg_init+0x0/0x12 returned 0 after 0 usecs [ 5.715117] calling log_tg_init+0x0/0x29 @ 1 [ 5.715236] initcall log_tg_init+0x0/0x29 returned 0 after 0 usecs [ 5.715356] calling masquerade_tg_init+0x0/0x39 @ 1 [ 5.715476] initcall masquerade_tg_init+0x0/0x39 returned 0 after 1 usecs [ 5.715652] calling netmap_tg_init+0x0/0x12 @ 1 [ 5.715772] initcall netmap_tg_init+0x0/0x12 returned 0 after 0 usecs [ 5.715894] calling redirect_tg_init+0x0/0x12 @ 1 [ 5.716013] initcall redirect_tg_init+0x0/0x12 returned 0 after 0 usecs [ 5.716190] calling reject_tg_init+0x0/0x12 @ 1 [ 5.716308] initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs [ 5.716428] calling ip_queue_init+0x0/0x13a @ 1 [ 5.716567] initcall ip_queue_init+0x0/0x13a returned 0 after 18 usecs [ 5.716689] calling inet_diag_init+0x0/0x72 @ 1 [ 5.716816] initcall inet_diag_init+0x0/0x72 returned 0 after 6 usecs [ 5.716937] calling tcp_diag_init+0x0/0x12 @ 1 [ 5.717057] initcall tcp_diag_init+0x0/0x12 returned 0 after 0 usecs [ 5.717177] calling bictcp_register+0x0/0x12 @ 1 [ 5.717351] TCP bic registered [ 5.717468] initcall bictcp_register+0x0/0x12 returned 0 after 113 usecs [ 5.717590] calling cubictcp_register+0x0/0x6c @ 1 [ 5.717707] TCP cubic registered [ 5.717881] initcall cubictcp_register+0x0/0x6c returned 0 after 168 usecs [ 5.718004] calling tcp_westwood_register+0x0/0x12 @ 1 [ 5.718123] TCP westwood registered [ 5.718240] initcall tcp_westwood_register+0x0/0x12 returned 0 after 113 usecs [ 5.718495] calling hybla_register+0x0/0x12 @ 1 [ 5.718613] TCP hybla registered [ 5.718730] initcall hybla_register+0x0/0x12 returned 0 after 112 usecs [ 5.718850] calling tcp_vegas_register+0x0/0x14 @ 1 [ 5.719023] TCP vegas registered [ 5.719142] initcall tcp_vegas_register+0x0/0x14 returned 0 after 114 usecs [ 5.719264] calling inet6_init+0x0/0x2ba @ 1 [ 5.719438] NET: Registered protocol family 10 [ 5.719973] initcall inet6_init+0x0/0x2ba returned 0 after 575 usecs [ 5.720094] calling tunnel6_init+0x0/0x66 @ 1 [ 5.720203] initcall tunnel6_init+0x0/0x66 returned 0 after 0 usecs [ 5.720203] calling ip6_tables_init+0x0/0xaa @ 1 [ 5.720203] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.720203] initcall ip6_tables_init+0x0/0xaa returned 0 after 174 usecs [ 5.720203] calling ip6table_filter_init+0x0/0x6f @ 1 [ 5.720890] initcall ip6table_filter_init+0x0/0x6f returned 0 after 27 usecs [ 5.721012] calling ip6table_mangle_init+0x0/0x51 @ 1 [ 5.721154] initcall ip6table_mangle_init+0x0/0x51 returned 0 after 21 usecs [ 5.721273] calling nf_conntrack_l3proto_ipv6_init+0x0/0xfc @ 1 [ 5.721398] initcall nf_conntrack_l3proto_ipv6_init+0x0/0xfc returned 0 after 4 usecs [ 5.721596] calling nf_defrag_init+0x0/0x54 @ 1 [ 5.721715] initcall nf_defrag_init+0x0/0x54 returned 0 after 3 usecs [ 5.721888] calling log_tg6_init+0x0/0x29 @ 1 [ 5.722004] initcall log_tg6_init+0x0/0x29 returned 0 after 0 usecs [ 5.722121] calling reject_tg6_init+0x0/0x12 @ 1 [ 5.722237] initcall reject_tg6_init+0x0/0x12 returned 0 after 0 usecs [ 5.722410] calling sit_init+0x0/0x60 @ 1 [ 5.722524] IPv6 over IPv4 tunneling driver [ 5.722953] initcall sit_init+0x0/0x60 returned 0 after 416 usecs [ 5.723074] calling ip6_tunnel_init+0x0/0x8e @ 1 [ 5.723441] initcall ip6_tunnel_init+0x0/0x8e returned 0 after 240 usecs [ 5.723563] calling packet_init+0x0/0x47 @ 1 [ 5.723682] NET: Registered protocol family 17 [ 5.725984] initcall packet_init+0x0/0x47 returned 0 after 2246 usecs [ 5.726103] calling br_init+0x0/0xa2 @ 1 [ 5.726302] initcall br_init+0x0/0xa2 returned 0 after 24 usecs [ 5.726422] calling init_rpcsec_gss+0x0/0x4d @ 1 [ 5.726549] initcall init_rpcsec_gss+0x0/0x4d returned 0 after 8 usecs [ 5.726669] calling vlan_proto_init+0x0/0x82 @ 1 [ 5.726785] 802.1Q VLAN Support v1.8 [ 5.726970] initcall vlan_proto_init+0x0/0x82 returned 0 after 179 usecs [ 5.727091] calling init_dns_resolver+0x0/0x108 @ 1 [ 5.727208] Registering the dns_resolver key type [ 5.727346] initcall init_dns_resolver+0x0/0x108 returned 0 after 132 usecs [ 5.727467] calling mcheck_debugfs_init+0x0/0x3b @ 1 [ 5.727592] initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 5 usecs [ 5.727713] calling severities_debugfs_init+0x0/0x3b @ 1 [ 5.727833] initcall severities_debugfs_init+0x0/0x3b returned 0 after 1 usecs [ 5.728087] calling hpet_insert_resource+0x0/0x23 @ 1 [ 5.728207] initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs [ 5.728327] initcall hpet_insert_resource+0x0/0x23 returned with error code 1 [ 5.728526] calling lapic_insert_resource+0x0/0x3f @ 1 [ 5.728701] initcall lapic_insert_resource+0x0/0x3f returned 0 after 2 usecs [ 5.728822] calling io_apic_bug_finalize+0x0/0x1b @ 1 [ 5.728940] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs [ 5.729060] calling check_early_ioremap_leak+0x0/0x50 @ 1 [ 5.729232] initcall check_early_ioremap_leak+0x0/0x50 returned 0 after 0 usecs [ 5.729431] calling pat_memtype_list_init+0x0/0x32 @ 1 [ 5.729563] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 14 usecs [ 5.729684] calling sched_init_debug+0x0/0x24 @ 1 [ 5.729806] initcall sched_init_debug+0x0/0x24 returned 0 after 1 usecs [ 5.729927] calling init_oops_id+0x0/0x31 @ 1 [ 5.730046] initcall init_oops_id+0x0/0x31 returned 0 after 3 usecs [ 5.730222] calling printk_late_init+0x0/0x50 @ 1 [ 5.730342] initcall printk_late_init+0x0/0x50 returned 0 after 1 usecs [ 5.730461] calling pm_qos_power_init+0x0/0xca @ 1 [ 5.730899] initcall pm_qos_power_init+0x0/0xca returned 0 after 310 usecs [ 5.731020] calling alarmtimer_init_late+0x0/0x73 @ 1 [ 5.731143] initcall alarmtimer_init_late+0x0/0x73 returned 0 after 2 usecs [ 5.731263] calling clear_boot_tracer+0x0/0x2d @ 1 [ 5.731379] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs [ 5.731555] calling max_swapfiles_check+0x0/0x8 @ 1 [ 5.731675] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs [ 5.731798] calling set_recommended_min_free_kbytes+0x0/0x82 @ 1 [ 5.731919] initcall set_recommended_min_free_kbytes+0x0/0x82 returned 0 after 0 usecs [ 5.732176] calling random32_reseed+0x0/0xb3 @ 1 [ 5.732303] initcall random32_reseed+0x0/0xb3 returned 0 after 5 usecs [ 5.732424] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 [ 5.732548] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 2 usecs [ 5.732804] calling pci_sysfs_init+0x0/0x51 @ 1 [ 5.733237] initcall pci_sysfs_init+0x0/0x51 returned 0 after 305 usecs [ 5.733358] calling boot_wait_for_devices+0x0/0x30 @ 1 [ 5.733478] initcall boot_wait_for_devices+0x0/0x30 returned 0 after 1 usecs [ 5.733600] calling seqgen_init+0x0/0xf @ 1 [ 5.733729] initcall seqgen_init+0x0/0xf returned 0 after 11 usecs [ 5.733906] calling scsi_complete_async_scans+0x0/0x11b @ 1 [ 5.734025] initcall scsi_complete_async_scans+0x0/0x11b returned 0 after 0 usecs [ 5.734224] calling rtc_hctosys+0x0/0x10d @ 1 [ 5.734395] rtc_cmos 00:05: setting system clock to 2011-06-14 00:04:04 UTC (1308009844) [ 5.734652] initcall rtc_hctosys+0x0/0x10d returned 0 after 304 usecs [ 5.734774] calling powernowk8_init+0x0/0x1bf @ 1 [ 5.734895] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) [ 5.742439] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 5.742559] powernow-k8: fid 0xa (1800 MHz), vid 0xa [ 5.742676] powernow-k8: fid 0xc (2000 MHz), vid 0x8 [ 5.742793] powernow-k8: fid 0xe (2200 MHz), vid 0x8 [ 5.742930] last_index set to -1 in cpufreq_stats_create_table! [ 5.743108] Marking TSC unstable due to cpufreq changes [ 5.743455] powernow-k8: fid trans failed, fid 0xa, curr 0x0 [ 5.743573] cpufreq_stats_update: cpu=0 [ 5.743611] max_state=4 last_index=0 [ 5.743834] powernow-k8: transition frequency failed [ 5.744317] powernow-k8: fid trans failed, fid 0xa, curr 0x0 [ 5.744435] cpufreq_stats_update: cpu=0 [ 5.744473] max_state=4 last_index=0 [ 5.744695] powernow-k8: transition frequency failed [ 5.745215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 5.745503] initcall powernowk8_init+0x0/0x1bf returned 0 after 10361 usecs [ 5.745627] calling acpi_cpufreq_init+0x0/0xc1 @ 1 [ 5.745753] initcall acpi_cpufreq_init+0x0/0xc1 returned -16 after 6 usecs [ 5.745874] initcall acpi_cpufreq_init+0x0/0xc1 returned with error code -16 [ 5.745994] calling memmap_init+0x0/0x34 @ 1 [ 5.746291] initcall memmap_init+0x0/0x34 returned 0 after 35 usecs [ 5.746413] calling pci_mmcfg_late_insert_resources+0x0/0x5e @ 1 [ 5.746535] initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned 1 after 0 usecs [ 5.746735] initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned with error code 1 [ 5.746934] calling tcp_congestion_default+0x0/0x12 @ 1 [ 5.747195] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs [ 5.747317] calling ip_auto_config+0x0/0xd7b @ 1 [ 5.747439] initcall ip_auto_config+0x0/0xd7b returned 0 after 5 usecs [ 5.747559] calling initialize_hashrnd+0x0/0x19 @ 1 [ 5.747824] initcall initialize_hashrnd+0x0/0x19 returned 0 after 2 usecs [ 5.748026] async_waiting @ 1 [ 5.748142] async_continuing @ 1 after 0 usec [ 5.748266] md: Waiting for all devices to be available before autodetect [ 5.748384] md: If you don''t use raid, use raid=noautodetect [ 5.748504] async_waiting @ 1 [ 5.748763] async_continuing @ 1 after 0 usec [ 5.749117] md: Autodetecting RAID arrays. [ 5.889913] md: Scanned 8 and added 8 devices. [ 5.890030] md: autorun ... [ 5.890145] md: considering sdb5 ... [ 5.890280] md: adding sdb5 ... [ 5.890398] md: sdb3 has different UUID to sdb5 [ 5.890518] md: sdb2 has different UUID to sdb5 [ 5.890635] md: sdb1 has different UUID to sdb5 [ 5.890755] md: adding sda5 ... [ 5.891018] md: sda3 has different UUID to sdb5 [ 5.891135] md: sda2 has different UUID to sdb5 [ 5.891251] md: sda1 has different UUID to sdb5 [ 5.891576] md: created md3 [ 5.891695] md: bind<sda5> [ 5.891817] md: bind<sdb5> [ 5.891936] md: running: <sdb5><sda5> [ 5.892386] bio: create slab <bio-1> at 1 [ 5.892646] md/raid1:md3: active with 2 out of 2 mirrors [ 5.892794] md3: detected capacity change from 0 to 309644754944 [ 5.892975] md: considering sdb3 ... [ 5.893097] md: adding sdb3 ... [ 5.893215] md: sdb2 has different UUID to sdb3 [ 5.893333] md: sdb1 has different UUID to sdb3 [ 5.893453] md: adding sda3 ... [ 5.893713] md: sda2 has different UUID to sdb3 [ 5.893833] md: sda1 has different UUID to sdb3 [ 5.894175] md: created md2 [ 5.894290] md: bind<sda3> [ 5.894422] md: bind<sdb3> [ 5.894543] md: running: <sdb3><sda3> [ 5.895100] md/raid1:md2: active with 2 out of 2 mirrors [ 5.895242] md2: detected capacity change from 0 to 7999520768 [ 5.895417] md: considering sdb2 ... [ 5.895538] md: adding sdb2 ... [ 5.895657] md: sdb1 has different UUID to sdb2 [ 5.895777] md: adding sda2 ... [ 5.895893] md: sda1 has different UUID to sdb2 [ 5.896350] md: created md1 [ 5.896467] md: bind<sda2> [ 5.896588] md: bind<sdb2> [ 5.896707] md: running: <sdb2><sda2> [ 5.897266] md/raid1:md1: active with 2 out of 2 mirrors [ 5.897408] md1: detected capacity change from 0 to 271319040 [ 5.897584] md: considering sdb1 ... [ 5.897706] md: adding sdb1 ... [ 5.897825] md: adding sda1 ... [ 5.897945] md: created md0 [ 5.898060] md: bind<sda1> [ 5.898179] md: bind<sdb1> [ 5.898298] md: running: <sdb1><sda1> [ 5.898870] md/raid1:md0: active with 2 out of 2 mirrors [ 5.899009] md0: detected capacity change from 0 to 2152923136 [ 5.899184] md: ... autorun DONE. [ 5.924550] md2: unknown partition table [ 5.925419] EXT3-fs (md2): recovery required on readonly filesystem [ 5.925539] EXT3-fs (md2): write access will be enabled during recovery [ 5.932059] EXT3-fs: barriers not enabled [ 5.998525] kjournald starting. Commit interval 5 seconds [ 5.998685] EXT3-fs (md2): recovery complete [ 5.999503] EXT3-fs (md2): mounted filesystem with writeback data mode [ 5.999640] VFS: Mounted root (ext3 filesystem) readonly on device 9:2. [ 6.023713] devtmpfs: mounted [ 6.023836] async_waiting @ 1 [ 6.023951] async_continuing @ 1 after 0 usec [ 6.024384] Freeing unused kernel memory: 576k freed [ 6.024817] Write protecting the kernel read-only data: 10240k [ 6.031696] Freeing unused kernel memory: 4k freed [ 6.032397] Freeing unused kernel memory: 964k freed [ 6.389662] /etc/rcS.d/S01mountkernfs.sh start [ 6.569431] splash_progress 2 [ 6.572049] /etc/rcS.d/S02udev start [ 6.721309] udev[825]: starting version 164 [ 7.493847] md1: unknown partition table [ 7.500638] md0: unknown partition table [ 7.510452] md3: unknown partition table [ 7.890275] splash_progress 4 [ 7.890646] /etc/rcS.d/S03mdadm-raid start [ 7.921170] splash_progress 6 [ 7.921357] /etc/rcS.d/S03mountdevsubfs.sh start [ 7.945936] splash_progress 8 [ 7.946300] /etc/rcS.d/S04bootlogd start [ 7.975940] splash_progress 11 [ 7.976289] /etc/rcS.d/S05keyboard-setup start [ 8.179187] splash_progress 13 [ 8.179595] /etc/rcS.d/S06hostname.sh start [ 8.193791] splash_progress 15 [ 8.193984] /etc/rcS.d/S06hwclockfirst.sh start [ 8.197644] splash_progress 17 [ 8.197830] /etc/rcS.d/S06lvm2 start [ 8.630873] splash_progress 19 [ 8.631231] /etc/rcS.d/S07checkroot.sh start [ 8.668326] Adding 2102460k swap on /dev/md0. Priority:-1 extents:1 across:2102460k [ 8.689279] EXT3-fs (md2): using internal journal [ 8.718190] splash_progress 22 [ 8.718634] /etc/rcS.d/S08hwclock.sh start [ 8.722445] splash_progress 24 [ 8.722636] /etc/rcS.d/S08ifupdown-clean start [ 8.751396] splash_progress 26 [ 8.751588] /etc/rcS.d/S08module-init-tools start [ 8.772291] splash_progress 28 [ 8.772481] /etc/rcS.d/S08mtab.sh start [ 8.903534] splash_progress 30 [ 8.903914] /etc/rcS.d/S09checkfs.sh start [ 8.993725] splash_progress 33 [ 8.994107] /etc/rcS.d/S10ifupdown start [ 9.012641] splash_progress 35 [ 9.012832] /etc/rcS.d/S10mountall.sh start [ 9.142456] EXT3-fs: barriers not enabled [ 9.150441] kjournald starting. Commit interval 5 seconds [ 9.150577] EXT3-fs (md1): warning: maximal mount count reached, running e2fsck is recommended [ 9.173004] EXT3-fs (md1): using internal journal [ 9.173124] EXT3-fs (md1): recovery complete [ 9.173245] EXT3-fs (md1): mounted filesystem with writeback data mode [ 9.273359] splash_progress 37 [ 9.273709] /etc/rcS.d/S11mountall-bootclean.sh start [ 9.346975] splash_progress 39 [ 9.347320] /etc/rcS.d/S12mountoverflowtmp start [ 9.366766] splash_progress 41 [ 9.367202] /etc/rcS.d/S13networking start [ 9.375051] Configuring network interfaces [ 10.102338] netconsole: network logging stopped on interface eth0 as it is joining a master device [ 10.102579] device eth0 entered promiscuous mode [ 10.129521] br0: port 1(eth0) entering forwarding state [ 10.129648] br0: port 1(eth0) entering forwarding state [ 11.120061] br0: port 1(eth0) entering forwarding state [ 11.354514] network interfaces configured [ 11.355019] splash_progress 44 [ 11.355182] /etc/rcS.d/S13procps start [ 11.394428] splash_progress 46 [ 11.394593] /etc/rcS.d/S13udev-mtab start [ 11.407610] splash_progress 48 [ 11.407782] /etc/rcS.d/S13urandom start [ 11.455954] splash_progress 50 [ 11.456291] /etc/rcS.d/S14mountnfs.sh start [ 11.465652] splash_progress 52 [ 11.465967] /etc/rcS.d/S15mountnfs-bootclean.sh start [ 11.507086] splash_progress 55 [ 11.507397] /etc/rcS.d/S16kbd start [ 11.629998] splash_progress 57 [ 11.630384] /etc/rcS.d/S17console-setup start [ 11.875413] splash_progress 59 [ 11.929333] /etc/rcS.d/S18bootmisc.sh start [ 11.962891] splash_progress 61 [ 11.963067] /etc/rcS.d/S18screen-cleanup start [ 12.002976] splash_progress 63 [ 12.003310] /etc/rcS.d/S19stop-bootlogd-single start [ 12.008616] splash_progress 66 [ 12.027549] /etc/rc2.d/S01rsyslog start [ 12.235453] splash_progress 67 [ 12.235621] /etc/rc2.d/S01sudo start [ 12.276384] splash_progress 69 [ 12.276554] /etc/rc2.d/S01xend start [ 12.418770] XENBUS: Unable to read cpu state [ 15.817960] splash_progress 71 [ 15.818496] /etc/rc2.d/S02acpid start [ 15.860059] eth0: no IPv6 routers present [ 15.907526] splash_progress 73 [ 15.907693] /etc/rc2.d/S02bind9 start [ 16.305255] splash_progress 75 [ 16.305421] /etc/rc2.d/S02loadcpufreq start [ 16.393566] splash_progress 77 [ 16.393731] /etc/rc2.d/S02mdadm start [ 16.428486] splash_progress 78 [ 16.428653] /etc/rc2.d/S02ntp start [ 16.542324] splash_progress 80 [ 16.542491] /etc/rc2.d/S02smartmontools start [ 16.561341] splash_progress 82 [ 16.561507] /etc/rc2.d/S02ssh start [ 16.723889] sshd (1747): /proc/1747/oom_adj is deprecated, please use /proc/1747/oom_score_adj instead. [ 16.740918] splash_progress 84 [ 16.741085] /etc/rc2.d/S02xendomains start [ 17.897128] splash_progress 86 [ 17.897587] /etc/rc2.d/S03bootlogs start [ 18.090151] splash_progress 88 [ 18.090327] /etc/rc2.d/S03cpufrequtils start [ 18.143342] powernow-k8: fid trans failed, fid 0x2, curr 0x0 [ 18.143543] cpufreq_stats_update: cpu=0 [ 18.143578] max_state=4 last_index=0 [ 18.143796] powernow-k8: transition frequency failed [ 18.144973] splash_progress 89 [ 18.145136] /etc/rc2.d/S03cron start [ 18.363744] splash_progress 91 [ 18.363909] /etc/rc2.d/S03rsync start [ 18.371345] splash_progress 93 [ 18.371722] /etc/rc2.d/S04rc.local start [ 18.389909] splash_progress 95 [ 18.390299] /etc/rc2.d/S04rmnologin start [ 18.401564] splash_progress 97 [ 18.401738] /etc/rc2.d/S04stop-bootlogd start [ 19.440417] powernow-k8: fid trans failed, fid 0x2, curr 0x0 [ 19.442724] cpufreq_stats_update: cpu=0 [ 19.442759] max_state=4 last_index=0 [ 19.442978] powernow-k8: transition frequency failed [ 19.511011] splash_progress 99 -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Konrad Rzeszutek Wilk
2011-Jun-14 19:48 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU [workaround included]
On Tue, Jun 14, 2011 at 02:10:55AM +0200, Tobias Diedrich wrote:> Konrad Rzeszutek Wilk wrote: > > On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote: > > > Hi, > > > > > > another issue I''m seeing with 3.0-rc2 and Xen is that there is an > > > unexpectedly high amount of kernel reserved memory. > > > > > > > > I suspect that Linux allocates page table entries and corresponding > > > data structures for the whole 6GB areas of the provided ''physical > > > RAM map'' even though it has rather big unusable holes in it. > > > > Can you run it with ''memblock=debug debug loglevel=8 initcall_debug''? > > It should tell you where it tries (and for much space) the pagetables.Ugh. In the meantime I would suggest you do the combination of: Xen hypervisor line: "dom0_mem=max:512M" and on the Linux line: "mem=512M" to cut down on the extra pagetable creation.. .. snip ..> [ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000 > [ 0.000000] 0000000000 - 0010000000 page 4k > [ 0.000000] kernel direct mapping tables up to 10000000 @ ff7e000-10000000 > [ 0.000000] memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE > [ 0.000000] xen: setting RW the range ffea000 - 10000000So ff7e->ffea pages, or 432kBytes> [ 0.000000] init_memory_mapping: 0000000100000000-000000016fef0000 > [ 0.000000] 0100000000 - 016fef0000 page 4k > [ 0.000000] kernel direct mapping tables up to 16fef0000 @ f3f7000-ff7e000 > [ 0.000000] memblock_x86_reserve_range: [0x0f3f7000-0x0f778fff] PGTABLE > [ 0.000000] xen: setting RW the range f779000 - ff7e000And here from f3f7 through f779, so 3592kB or 3.5MB for un-used potential balloon memory. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-14 21:14 UTC
Re: [Xen-users] 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU
Konrad Rzeszutek Wilk wrote:> On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote: > > Hi, > > > > another issue I''m seeing with 3.0-rc2 and Xen is that there is an > > unexpectedly high amount of kernel reserved memory. > > > > > I suspect that Linux allocates page table entries and corresponding > > data structures for the whole 6GB areas of the provided ''physical > > RAM map'' even though it has rather big unusable holes in it. > > Can you run it with ''memblock=debug debug loglevel=8 initcall_debug''? > It should tell you where it tries (and for much space) the pagetables.Here is a diff between verbose domu with and without mem=256M (with "s@after [0-9]* usecs@after XX usecs@g" to suppress the timing differences somewhat) --- noextraopts 2011-06-14 23:02:24.549323941 +0200 +++ mem256 2011-06-14 23:01:46.140538541 +0200 @@ -1,7 +1,7 @@ Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #53 SMP Tue Jun 14 15:33:45 CEST 2011 -Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 +Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro mem=256M ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 ACPI in unprivileged domain disabled released 0 pages of unused memory Set 0 page(s) to 1-1 mapping. @@ -10,22 +10,25 @@ Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000010000000 (usable) Xen: 0000000100000000 - 0000000100800000 (usable) +e820 remove range: 0000000010000000 - ffffffffffffffff (usable) NX (Execute Disable) protection: active MPS support code is not built-in. Using acpi=off or acpi=noirq or pci=noacpi may have problem +user-defined physical RAM map: + user: 0000000000000000 - 00000000000a0000 (usable) + user: 00000000000a0000 - 0000000000100000 (reserved) + user: 0000000000100000 - 0000000010000000 (usable) DMI not present or invalid. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found -last_pfn = 0x100800 max_arch_pfn = 0x400000000 last_pfn = 0x10000 max_arch_pfn = 0x400000000 memblock_x86_reserve_range: [0x01ce8000-0x01cf8fff] BRK MEMBLOCK configuration: - memory size = 0x10790000 - memory.cnt = 0x3 + memory size = 0xff90000 + memory.cnt = 0x2 memory[0x0] [0x00000000010000-0x0000000009ffff], 0x90000 bytes memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes - memory[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes reserved.cnt = 0x3 reserved[0x0] [0x00000001000000-0x00000001cf8fff], 0xcf9000 bytes reserved[0x1] [0x00000001e1e000-0x00000001eb3fff], 0x96000 bytes @@ -38,123 +41,109 @@ kernel direct mapping tables up to 10000000 @ ff7e000-10000000 memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE xen: setting RW the range ffea000 - 10000000 -init_memory_mapping: 0000000100000000-0000000100800000 - 0100000000 - 0100800000 page 4k -kernel direct mapping tables up to 100800000 @ f774000-ff7e000 - memblock_x86_reserve_range: [0x0f774000-0x0f778fff] PGTABLE -xen: setting RW the range f779000 - ff7e000 memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM - memblock_x86_reserve_range: [0x0fffef80-0x0fffefc7] BOOTMEM + memblock_x86_reserve_range: [0x0fffefc0-0x0fffefef] BOOTMEM memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM - memblock_x86_reserve_range: [0x0f000000-0x0f5fffff] BOOTMEM + memblock_x86_reserve_range: [0x0f200000-0x0f5fffff] BOOTMEM memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM - memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM - memblock_x86_free_range: [0x0f540000-0x0f5fffff] + memblock_x86_free_range: [0x0f580000-0x0f5fffff] memblock_x86_free_range: [0x0f77e000-0x0fb7dfff] memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 - Normal 0x00100000 -> 0x00100800 + Normal empty Movable zone start PFN for each node -early_node_map[3] active PFN ranges +early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x000000a0 0: 0x00000100 -> 0x00010000 - 0: 0x00100000 -> 0x00100800 -On node 0 totalpages: 67472 +On node 0 totalpages: 65424 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3926 pages, LIFO batch:0 - memblock_x86_reserve_range: [0x0fffee00-0x0fffef7f] BOOTMEM - DMA32 zone: 14280 pages used for memmap - DMA32 zone: 47160 pages, LIFO batch:15 - memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM - Normal zone: 28 pages used for memmap - Normal zone: 2020 pages, LIFO batch:0 - memblock_x86_reserve_range: [0x0fffed40-0x0fffedff] BOOTMEM - memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM + memblock_x86_reserve_range: [0x0fffee40-0x0fffefbf] BOOTMEM + DMA32 zone: 840 pages used for memmap + DMA32 zone: 60600 pages, LIFO batch:15 + memblock_x86_reserve_range: [0x0fff8800-0x0fff9fff] BOOTMEM memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM + memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM SMP: Allowing 1 CPUs, 0 hotplug CPUs No local APIC present APIC: disable apic facility APIC: switched to apic NOOP nr_irqs_gsi: 16 - memblock_x86_reserve_range: [0x0fffec00-0x0fffed17] BOOTMEM - memblock_x86_reserve_range: [0x0fffeb80-0x0fffebe7] BOOTMEM - memblock_x86_reserve_range: [0x0fffeb00-0x0fffeb67] BOOTMEM - memblock_x86_reserve_range: [0x0fffea80-0x0fffeae7] BOOTMEM - memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM + memblock_x86_reserve_range: [0x0fffed40-0x0fffee1f] BOOTMEM + memblock_x86_reserve_range: [0x0fffecc0-0x0fffed27] BOOTMEM + memblock_x86_reserve_range: [0x0fffec40-0x0fffeca7] BOOTMEM + memblock_x86_reserve_range: [0x0fffebc0-0x0fffec27] BOOTMEM + memblock_x86_reserve_range: [0x0fffeb40-0x0fffeba7] BOOTMEM Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000) Booting paravirtualized kernel on Xen Xen version: 4.1.0 (preserve-AD) - memblock_x86_reserve_range: [0x0fffe940-0x0fffe9d2] BOOTMEM - memblock_x86_reserve_range: [0x0fffe880-0x0fffe912] BOOTMEM + memblock_x86_reserve_range: [0x0fffea80-0x0fffeb1b] BOOTMEM + memblock_x86_reserve_range: [0x0fffe9c0-0x0fffea5b] BOOTMEM setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1 - memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM - memblock_x86_reserve_range: [0x0ff4b000-0x0ff65fff] BOOTMEM -PERCPU: Embedded 27 pages/cpu @ffff88000ff4b000 s79488 r8192 d22912 u110592 - memblock_x86_reserve_range: [0x0fffe840-0x0fffe847] BOOTMEM - memblock_x86_reserve_range: [0x0fffe800-0x0fffe807] BOOTMEM - memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe7c3] BOOTMEM - memblock_x86_reserve_range: [0x0fffe780-0x0fffe787] BOOTMEM + memblock_x86_reserve_range: [0x0fff3000-0x0fff3fff] BOOTMEM + memblock_x86_reserve_range: [0x0ff63000-0x0ff7dfff] BOOTMEM +PERCPU: Embedded 27 pages/cpu @ffff88000ff63000 s79488 r8192 d22912 u110592 + memblock_x86_reserve_range: [0x0fffe980-0x0fffe987] BOOTMEM + memblock_x86_reserve_range: [0x0fffe940-0x0fffe947] BOOTMEM + memblock_x86_reserve_range: [0x0fffe900-0x0fffe903] BOOTMEM + memblock_x86_reserve_range: [0x0fffe8c0-0x0fffe8c7] BOOTMEM pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096 pcpu-alloc: [0] 0 - memblock_x86_reserve_range: [0x0fffe680-0x0fffe77f] BOOTMEM - memblock_x86_reserve_range: [0x0fffe600-0x0fffe647] BOOTMEM - memblock_x86_reserve_range: [0x0fffe580-0x0fffe5c7] BOOTMEM - memblock_x86_free_range: [0x0fff5000-0x0fff5fff] + memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe8bf] BOOTMEM + memblock_x86_reserve_range: [0x0fffe740-0x0fffe787] BOOTMEM + memblock_x86_reserve_range: [0x0fffe6c0-0x0fffe707] BOOTMEM memblock_x86_free_range: [0x0fff4000-0x0fff4fff] -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 53106 -Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 - memblock_x86_reserve_range: [0x0fff4000-0x0fff5fff] BOOTMEM + memblock_x86_free_range: [0x0fff3000-0x0fff3fff] +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64526 +Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro mem=256M ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 + memblock_x86_reserve_range: [0x0fff3000-0x0fff4fff] BOOTMEM PID hash table entries: 1024 (order: 1, 8192 bytes) - memblock_x86_reserve_range: [0x0ff0b000-0x0ff4afff] BOOTMEM + memblock_x86_reserve_range: [0x0ff23000-0x0ff62fff] BOOTMEM Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) - memblock_x86_reserve_range: [0x0feeb000-0x0ff0afff] BOOTMEM + memblock_x86_reserve_range: [0x0ff03000-0x0ff22fff] BOOTMEM Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) - memblock_x86_reserve_range: [0x0b000000-0x0effffff] BOOTMEM - memblock_x86_reserve_range: [0x0fecb000-0x0feeafff] BOOTMEM - memblock_x86_reserve_range: [0x0fe8b000-0x0fecafff] BOOTMEM - memblock_x86_reserve_range: [0x0ffec000-0x0fff3fff] BOOTMEM Checking aperture... No AGP bridge found Subtract (23 early reservations) [000009e000-000009ffff] [0001000000-0001cf8fff] [0001e1e000-0001eb3fff] - [000b000000-000f53ffff] - [000f774000-000f778fff] - [000fe8b000-000ffe9fff] - [000ffec000-000fffdfff] - [000fffe580-000fffe5c7] - [000fffe600-000fffe647] - [000fffe680-000fffe787] - [000fffe7c0-000fffe7c3] - [000fffe800-000fffe807] - [000fffe840-000fffe847] - [000fffe880-000fffe912] - [000fffe940-000fffe9d2] - [000fffea00-000fffea67] - [000fffea80-000fffeae7] - [000fffeb00-000fffeb67] - [000fffeb80-000fffebe7] - [000fffec00-000fffed17] - [000fffed40-000fffefc7] + [000f200000-000f57ffff] + [000ff03000-000ffe9fff] + [000fff3000-000fff7fff] + [000fff8800-000fffdfff] + [000fffe6c0-000fffe707] + [000fffe740-000fffe787] + [000fffe7c0-000fffe8c7] + [000fffe900-000fffe903] + [000fffe940-000fffe947] + [000fffe980-000fffe987] + [000fffe9c0-000fffea5b] + [000fffea80-000fffeb1b] + [000fffeb40-000fffeba7] + [000fffebc0-000fffec27] + [000fffec40-000fffeca7] + [000fffecc0-000fffed27] + [000fffed40-000fffee1f] + [000fffee40-000fffefef] [000ffff000-000fffffff] [0100000000-01007fffff] -Memory: 175388k/4202496k available (6122k kernel code, 3932608k absent, 94500k reserved, 4761k data, 576k init) +Memory: 243244k/262144k available (6122k kernel code, 448k absent, 18452k reserved, 4761k data, 576k init) Hierarchical RCU implementation. NR_IRQS:320 Console: colour dummy device 80x25 console [tty0] enabled console [hvc0] enabled -allocated 3145728 bytes of page_cgroup +allocated 2097152 bytes of page_cgroup please try ''cgroup_disable=memory'' option if you don''t want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 @@ -244,8 +233,8 @@ initcall debugfs_init+0x0/0x5c returned 0 after XX usecs calling calibrate_xor_blocks+0x0/0xa0 @ 1 xor: automatically using best checksumming function: generic_sse - generic_sse: 2901.200 MB/sec -xor: using function: generic_sse (2901.200 MB/sec) + generic_sse: 2833.600 MB/sec +xor: using function: generic_sse (2833.600 MB/sec) initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after XX usecs @@ -336,14 +325,14 @@ calling genhd_device_init+0x0/0x7c @ 1 initcall genhd_device_init+0x0/0x7c returned 0 after XX usecs calling raid6_select_algo+0x0/0x1bd @ 1 -raid6: int64x1 2032 MB/s -raid6: int64x2 2398 MB/s -raid6: int64x4 1711 MB/s -raid6: int64x8 1243 MB/s -raid6: sse2x1 1750 MB/s -raid6: sse2x2 2362 MB/s -raid6: sse2x4 1807 MB/s -raid6: using algorithm sse2x2 (2362 MB/s) +raid6: int64x1 2027 MB/s +raid6: int64x2 2392 MB/s +raid6: int64x4 1703 MB/s +raid6: int64x8 1241 MB/s +raid6: sse2x1 1810 MB/s +raid6: sse2x2 2515 MB/s +raid6: sse2x4 3221 MB/s +raid6: using algorithm sse2x4 (3221 MB/s) initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs calling pci_slot_init+0x0/0x46 @ 1 initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs @@ -362,7 +351,7 @@ initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after XX usecs calling balloon_init+0x0/0x130 @ 1 xen/balloon: Initialising balloon driver. -last_pfn = 0x100800 max_arch_pfn = 0x400000000 +last_pfn = 0x10000 max_arch_pfn = 0x400000000 initcall balloon_init+0x0/0x130 returned 0 after XX usecs calling xenbus_probe_backend_init+0x0/0x2d @ 1 initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after XX usecs @@ -499,9 +488,6 @@ calling populate_rootfs+0x0/0x9e @ 1 initcall populate_rootfs+0x0/0x9e returned 0 after XX usecs calling pci_iommu_init+0x0/0x41 @ 1 -PCI-DMA: Using software bounce buffering for IO (SWIOTLB) -Placing 64MB software IO TLB between ffff88000b000000 - ffff88000f000000 -software IO TLB at phys 0xb000000 - 0xf000000 initcall pci_iommu_init+0x0/0x41 returned 0 after XX usecs calling irqfd_module_init+0x0/0x31 @ 1 initcall irqfd_module_init+0x0/0x31 returned 0 after XX usecs @@ -728,7 +714,7 @@ SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled initcall init_xfs_fs+0x0/0xa9 returned 0 after XX usecs calling ipc_init+0x0/0x23 @ 1 -msgmni has been set to 342 +msgmni has been set to 475 initcall ipc_init+0x0/0x23 returned 0 after XX usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after XX usecs @@ -864,7 +850,6 @@ calling xen_blkif_init+0x0/0x276 @ 1 initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs calling init_sd+0x0/0x112 @ 1 -blkfront: xvda2: flush diskcache: enabled initcall init_sd+0x0/0x112 returned 0 after XX usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after XX usecs @@ -885,6 +870,7 @@ calling pdc2027x_init+0x0/0x1b @ 1 initcall pdc2027x_init+0x0/0x1b returned 0 after XX usecs calling sil680_init+0x0/0x1b @ 1 +blkfront: xvda2: flush diskcache: enabled initcall sil680_init+0x0/0x1b returned 0 after XX usecs calling via_init+0x0/0x1b @ 1 initcall via_init+0x0/0x1b returned 0 after XX usecs @@ -1210,7 +1196,7 @@ calling nfnetlink_log_init+0x0/0xd7 @ 1 initcall nfnetlink_log_init+0x0/0xd7 returned 0 after XX usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 -nf_conntrack version 0.5.0 (1370 buckets, 5480 max) +nf_conntrack version 0.5.0 (1900 buckets, 7600 max) initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after XX usecs calling ctnetlink_init+0x0/0x76 @ 1 ctnetlink v0.93: registering with nfnetlink. @@ -1468,16 +1454,19 @@ calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after XX usecs async_waiting @ 1 -async_continuing @ 1 after 0 usec +async_continuing @ 1 after 44 usec md: Waiting for all devices to be available before autodetect md: If you don''t use raid, use raid=noautodetect async_waiting @ 1 -async_continuing @ 1 after 0 usec +async_continuing @ 1 after 3 usec md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (xvda1): error: couldn''t mount because of unsupported optional features (240) -EXT2-fs (xvda1): error: couldn''t mount because of unsupported optional features (240) +EXT2-fs (xvda1): error: couldn''t mount because of unsupported optional features (244) +EXT4-fs (xvda1): INFO: recovery required on readonly filesystem +EXT4-fs (xvda1): write access will be enabled during recovery +EXT4-fs (xvda1): recovery complete EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 202:1.> What happens if you have ''maxmem'' value equal to ''memory'' in your guest config?No difference: --- verbose_noextraopts 2011-06-14 23:02:24.549323941 +0200 +++ verbose_maxmem 2011-06-14 23:09:47.135304415 +0200 @@ -244,8 +244,8 @@ initcall debugfs_init+0x0/0x5c returned 0 after XX usecs calling calibrate_xor_blocks+0x0/0xa0 @ 1 xor: automatically using best checksumming function: generic_sse - generic_sse: 2901.200 MB/sec -xor: using function: generic_sse (2901.200 MB/sec) + generic_sse: 2834.000 MB/sec +xor: using function: generic_sse (2834.000 MB/sec) initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after XX usecs @@ -338,12 +338,12 @@ calling raid6_select_algo+0x0/0x1bd @ 1 raid6: int64x1 2032 MB/s raid6: int64x2 2398 MB/s -raid6: int64x4 1711 MB/s +raid6: int64x4 1710 MB/s raid6: int64x8 1243 MB/s -raid6: sse2x1 1750 MB/s -raid6: sse2x2 2362 MB/s -raid6: sse2x4 1807 MB/s -raid6: using algorithm sse2x2 (2362 MB/s) +raid6: sse2x1 1926 MB/s +raid6: sse2x2 2536 MB/s +raid6: sse2x4 1539 MB/s +raid6: using algorithm sse2x2 (2536 MB/s) initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs calling pci_slot_init+0x0/0x46 @ 1 initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs @@ -859,9 +859,9 @@ calling init_cryptoloop+0x0/0x2f @ 1 initcall init_cryptoloop+0x0/0x2f returned 0 after XX usecs calling xlblk_init+0x0/0x81 @ 1 -blkfront: xvda1: flush diskcache: enabled initcall xlblk_init+0x0/0x81 returned 0 after XX usecs calling xen_blkif_init+0x0/0x276 @ 1 +blkfront: xvda1: flush diskcache: enabled initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs calling init_sd+0x0/0x112 @ 1 blkfront: xvda2: flush diskcache: enabled @@ -1478,6 +1478,9 @@ md: autorun ... md: ... autorun DONE. EXT3-fs (xvda1): error: couldn''t mount because of unsupported optional features (240) -EXT2-fs (xvda1): error: couldn''t mount because of unsupported optional features (240) +EXT2-fs (xvda1): error: couldn''t mount because of unsupported optional features (244) +EXT4-fs (xvda1): INFO: recovery required on readonly filesystem +EXT4-fs (xvda1): write access will be enabled during recovery +EXT4-fs (xvda1): recovery complete EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 202:1. And just the noextraopts base log: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #53 SMP Tue Jun 14 15:33:45 CEST 2011 Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 ACPI in unprivileged domain disabled released 0 pages of unused memory Set 0 page(s) to 1-1 mapping. BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000000a0000 (usable) Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000010000000 (usable) Xen: 0000000100000000 - 0000000100800000 (usable) NX (Execute Disable) protection: active MPS support code is not built-in. Using acpi=off or acpi=noirq or pci=noacpi may have problem DMI not present or invalid. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x100800 max_arch_pfn = 0x400000000 last_pfn = 0x10000 max_arch_pfn = 0x400000000 memblock_x86_reserve_range: [0x01ce8000-0x01cf8fff] BRK MEMBLOCK configuration: memory size = 0x10790000 memory.cnt = 0x3 memory[0x0] [0x00000000010000-0x0000000009ffff], 0x90000 bytes memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes memory[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes reserved.cnt = 0x3 reserved[0x0] [0x00000001000000-0x00000001cf8fff], 0xcf9000 bytes reserved[0x1] [0x00000001e1e000-0x00000001eb3fff], 0x96000 bytes reserved[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes initial memory mapped : 0 - 01e1e000 memblock_x86_reserve_range: [0x0009e000-0x0009ffff] TRAMPOLINE Base memory trampoline at [ffff88000009e000] 9e000 size 8192 init_memory_mapping: 0000000000000000-0000000010000000 0000000000 - 0010000000 page 4k kernel direct mapping tables up to 10000000 @ ff7e000-10000000 memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE xen: setting RW the range ffea000 - 10000000 init_memory_mapping: 0000000100000000-0000000100800000 0100000000 - 0100800000 page 4k kernel direct mapping tables up to 100800000 @ f774000-ff7e000 memblock_x86_reserve_range: [0x0f774000-0x0f778fff] PGTABLE xen: setting RW the range f779000 - ff7e000 memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM memblock_x86_reserve_range: [0x0fffef80-0x0fffefc7] BOOTMEM memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM memblock_x86_reserve_range: [0x0f000000-0x0f5fffff] BOOTMEM memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM memblock_x86_free_range: [0x0f540000-0x0f5fffff] memblock_x86_free_range: [0x0f77e000-0x0fb7dfff] memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100800 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x000000a0 0: 0x00000100 -> 0x00010000 0: 0x00100000 -> 0x00100800 On node 0 totalpages: 67472 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3926 pages, LIFO batch:0 memblock_x86_reserve_range: [0x0fffee00-0x0fffef7f] BOOTMEM DMA32 zone: 14280 pages used for memmap DMA32 zone: 47160 pages, LIFO batch:15 memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM Normal zone: 28 pages used for memmap Normal zone: 2020 pages, LIFO batch:0 memblock_x86_reserve_range: [0x0fffed40-0x0fffedff] BOOTMEM memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM SMP: Allowing 1 CPUs, 0 hotplug CPUs No local APIC present APIC: disable apic facility APIC: switched to apic NOOP nr_irqs_gsi: 16 memblock_x86_reserve_range: [0x0fffec00-0x0fffed17] BOOTMEM memblock_x86_reserve_range: [0x0fffeb80-0x0fffebe7] BOOTMEM memblock_x86_reserve_range: [0x0fffeb00-0x0fffeb67] BOOTMEM memblock_x86_reserve_range: [0x0fffea80-0x0fffeae7] BOOTMEM memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000) Booting paravirtualized kernel on Xen Xen version: 4.1.0 (preserve-AD) memblock_x86_reserve_range: [0x0fffe940-0x0fffe9d2] BOOTMEM memblock_x86_reserve_range: [0x0fffe880-0x0fffe912] BOOTMEM setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1 memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM memblock_x86_reserve_range: [0x0ff4b000-0x0ff65fff] BOOTMEM PERCPU: Embedded 27 pages/cpu @ffff88000ff4b000 s79488 r8192 d22912 u110592 memblock_x86_reserve_range: [0x0fffe840-0x0fffe847] BOOTMEM memblock_x86_reserve_range: [0x0fffe800-0x0fffe807] BOOTMEM memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe7c3] BOOTMEM memblock_x86_reserve_range: [0x0fffe780-0x0fffe787] BOOTMEM pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096 pcpu-alloc: [0] 0 memblock_x86_reserve_range: [0x0fffe680-0x0fffe77f] BOOTMEM memblock_x86_reserve_range: [0x0fffe600-0x0fffe647] BOOTMEM memblock_x86_reserve_range: [0x0fffe580-0x0fffe5c7] BOOTMEM memblock_x86_free_range: [0x0fff5000-0x0fff5fff] memblock_x86_free_range: [0x0fff4000-0x0fff4fff] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 53106 Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4 memblock_x86_reserve_range: [0x0fff4000-0x0fff5fff] BOOTMEM PID hash table entries: 1024 (order: 1, 8192 bytes) memblock_x86_reserve_range: [0x0ff0b000-0x0ff4afff] BOOTMEM Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) memblock_x86_reserve_range: [0x0feeb000-0x0ff0afff] BOOTMEM Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) memblock_x86_reserve_range: [0x0b000000-0x0effffff] BOOTMEM memblock_x86_reserve_range: [0x0fecb000-0x0feeafff] BOOTMEM memblock_x86_reserve_range: [0x0fe8b000-0x0fecafff] BOOTMEM memblock_x86_reserve_range: [0x0ffec000-0x0fff3fff] BOOTMEM Checking aperture... No AGP bridge found Subtract (23 early reservations) [000009e000-000009ffff] [0001000000-0001cf8fff] [0001e1e000-0001eb3fff] [000b000000-000f53ffff] [000f774000-000f778fff] [000fe8b000-000ffe9fff] [000ffec000-000fffdfff] [000fffe580-000fffe5c7] [000fffe600-000fffe647] [000fffe680-000fffe787] [000fffe7c0-000fffe7c3] [000fffe800-000fffe807] [000fffe840-000fffe847] [000fffe880-000fffe912] [000fffe940-000fffe9d2] [000fffea00-000fffea67] [000fffea80-000fffeae7] [000fffeb00-000fffeb67] [000fffeb80-000fffebe7] [000fffec00-000fffed17] [000fffed40-000fffefc7] [000ffff000-000fffffff] [0100000000-01007fffff] Memory: 175388k/4202496k available (6122k kernel code, 3932608k absent, 94500k reserved, 4761k data, 576k init) Hierarchical RCU implementation. NR_IRQS:320 Console: colour dummy device 80x25 console [tty0] enabled console [hvc0] enabled allocated 3145728 bytes of page_cgroup please try ''cgroup_disable=memory'' option if you don''t want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 Detected 2199.838 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.67 BogoMIPS (lpj=21998380) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys net_cls Initializing cgroup subsys blkio tseg: 007ff00000 SMP alternatives: switching to UP code Freeing SMP alternatives: 28k freed calling trace_init_flags_sys_exit+0x0/0x12 @ 1 initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after XX usecs calling trace_init_flags_sys_enter+0x0/0x12 @ 1 initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after XX usecs calling init_hw_perf_events+0x0/0xf1a @ 1 Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. Broken PMU hardware detected, using software events only. initcall init_hw_perf_events+0x0/0xf1a returned 0 after XX usecs calling register_trigger_all_cpu_backtrace+0x0/0x14 @ 1 initcall register_trigger_all_cpu_backtrace+0x0/0x14 returned 0 after XX usecs calling migration_init+0x0/0x70 @ 1 initcall migration_init+0x0/0x70 returned 0 after XX usecs calling spawn_ksoftirqd+0x0/0x55 @ 1 initcall spawn_ksoftirqd+0x0/0x55 returned 0 after XX usecs calling init_workqueues+0x0/0x2ff @ 1 initcall init_workqueues+0x0/0x2ff returned 0 after XX usecs calling init_call_single_data+0x0/0x8c @ 1 initcall init_call_single_data+0x0/0x8c returned 0 after XX usecs calling cpu_stop_init+0x0/0xaa @ 1 initcall cpu_stop_init+0x0/0xaa returned 0 after XX usecs calling rcu_spawn_kthreads+0x0/0xc9 @ 1 initcall rcu_spawn_kthreads+0x0/0xc9 returned 0 after XX usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after XX usecs calling tracer_alloc_buffers+0x0/0x168 @ 1 initcall tracer_alloc_buffers+0x0/0x168 returned 0 after XX usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after XX usecs NMI watchdog disabled (cpu0): hardware events not enabled Brought up 1 CPUs devtmpfs: initialized calling init_mmap_min_addr+0x0/0x16 @ 1 initcall init_mmap_min_addr+0x0/0x16 returned 0 after XX usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after XX usecs calling net_ns_init+0x0/0x154 @ 1 initcall net_ns_init+0x0/0x154 returned 0 after XX usecs calling cpufreq_tsc+0x0/0x30 @ 1 initcall cpufreq_tsc+0x0/0x30 returned 0 after XX usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after XX usecs calling init_lapic_sysfs+0x0/0x20 @ 1 initcall init_lapic_sysfs+0x0/0x20 returned 0 after XX usecs calling init_smp_flush+0x0/0x2d @ 1 initcall init_smp_flush+0x0/0x2d returned 0 after XX usecs calling alloc_frozen_cpus+0x0/0x8 @ 1 initcall alloc_frozen_cpus+0x0/0x8 returned 0 after XX usecs calling sysctl_init+0x0/0x16 @ 1 initcall sysctl_init+0x0/0x16 returned 0 after XX usecs calling ksysfs_init+0x0/0x94 @ 1 initcall ksysfs_init+0x0/0x94 returned 0 after XX usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after XX usecs calling pm_init+0x0/0x63 @ 1 initcall pm_init+0x0/0x63 returned 0 after XX usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after XX usecs calling fsnotify_init+0x0/0x26 @ 1 initcall fsnotify_init+0x0/0x26 returned 0 after XX usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after XX usecs calling init_misc_binfmt+0x0/0x44 @ 1 initcall init_misc_binfmt+0x0/0x44 returned 0 after XX usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after XX usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after XX usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after XX usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after XX usecs calling calibrate_xor_blocks+0x0/0xa0 @ 1 xor: automatically using best checksumming function: generic_sse generic_sse: 2901.200 MB/sec xor: using function: generic_sse (2901.200 MB/sec) initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after XX usecs calling __gnttab_init+0x0/0x21 @ 1 Grant table initialized initcall __gnttab_init+0x0/0x21 returned 0 after XX usecs calling cpufreq_core_init+0x0/0xad @ 1 initcall cpufreq_core_init+0x0/0xad returned 0 after XX usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after XX usecs calling sock_init+0x0/0x83 @ 1 initcall sock_init+0x0/0x83 returned 0 after XX usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after XX usecs calling netlink_proto_init+0x0/0x1ad @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x1ad returned 0 after XX usecs calling bdi_class_init+0x0/0x49 @ 1 initcall bdi_class_init+0x0/0x49 returned 0 after XX usecs calling kobject_uevent_init+0x0/0x21 @ 1 initcall kobject_uevent_init+0x0/0x21 returned 0 after XX usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after XX usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after XX usecs calling xenbus_init+0x0/0x371 @ 1 initcall xenbus_init+0x0/0x371 returned 0 after XX usecs calling tty_class_init+0x0/0x34 @ 1 initcall tty_class_init+0x0/0x34 returned 0 after XX usecs calling vtconsole_class_init+0x0/0xeb @ 1 initcall vtconsole_class_init+0x0/0xeb returned 0 after XX usecs calling wakeup_sources_debugfs_init+0x0/0x2b @ 1 initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after XX usecs calling i2c_init+0x0/0x6f @ 1 initcall i2c_init+0x0/0x6f returned 0 after XX usecs calling amd_postcore_init+0x0/0x150 @ 1 initcall amd_postcore_init+0x0/0x150 returned 0 after XX usecs calling arch_kdebugfs_init+0x0/0x24 @ 1 initcall arch_kdebugfs_init+0x0/0x24 returned 0 after XX usecs calling configure_trampolines+0x0/0x29 @ 1 initcall configure_trampolines+0x0/0x29 returned 0 after XX usecs calling mtrr_if_init+0x0/0x64 @ 1 initcall mtrr_if_init+0x0/0x64 returned -19 after XX usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned -1 after XX usecs initcall ffh_cstate_init+0x0/0x2a returned with error code -1 calling acpi_pci_init+0x0/0x61 @ 1 initcall acpi_pci_init+0x0/0x61 returned 0 after XX usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after XX usecs calling register_xen_pci_notifier+0x0/0x31 @ 1 initcall register_xen_pci_notifier+0x0/0x31 returned 0 after XX usecs calling dmi_id_init+0x0/0x30e @ 1 initcall dmi_id_init+0x0/0x30e returned -19 after XX usecs calling pci_arch_init+0x0/0x69 @ 1 PCI: setting up Xen PCI frontend stub PCI: pci_cache_line_size set to 64 bytes initcall pci_arch_init+0x0/0x69 returned 0 after XX usecs calling topology_init+0x0/0x40 @ 1 initcall topology_init+0x0/0x40 returned 0 after XX usecs calling mtrr_init_finialize+0x0/0x36 @ 1 initcall mtrr_init_finialize+0x0/0x36 returned 0 after XX usecs calling init_vdso_vars+0x0/0xf8 @ 1 initcall init_vdso_vars+0x0/0xf8 returned 0 after XX usecs calling sysenter_setup+0x0/0x2c8 @ 1 initcall sysenter_setup+0x0/0x2c8 returned 0 after XX usecs calling param_sysfs_init+0x0/0x1b4 @ 1 initcall param_sysfs_init+0x0/0x1b4 returned 0 after XX usecs calling pm_sysrq_init+0x0/0x19 @ 1 initcall pm_sysrq_init+0x0/0x19 returned 0 after XX usecs calling default_bdi_init+0x0/0xa9 @ 1 initcall default_bdi_init+0x0/0xa9 returned 0 after XX usecs calling init_bio+0x0/0xe5 @ 1 bio: create slab <bio-0> at 0 initcall init_bio+0x0/0xe5 returned 0 after XX usecs calling fsnotify_notification_init+0x0/0x8b @ 1 initcall fsnotify_notification_init+0x0/0x8b returned 0 after XX usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after XX usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after XX usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after XX usecs calling blk_softirq_init+0x0/0x6e @ 1 initcall blk_softirq_init+0x0/0x6e returned 0 after XX usecs calling blk_iopoll_setup+0x0/0x6e @ 1 initcall blk_iopoll_setup+0x0/0x6e returned 0 after XX usecs calling genhd_device_init+0x0/0x7c @ 1 initcall genhd_device_init+0x0/0x7c returned 0 after XX usecs calling raid6_select_algo+0x0/0x1bd @ 1 raid6: int64x1 2032 MB/s raid6: int64x2 2398 MB/s raid6: int64x4 1711 MB/s raid6: int64x8 1243 MB/s raid6: sse2x1 1750 MB/s raid6: sse2x2 2362 MB/s raid6: sse2x4 1807 MB/s raid6: using algorithm sse2x2 (2362 MB/s) initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs calling pci_slot_init+0x0/0x46 @ 1 initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs calling acpi_init+0x0/0xb6 @ 1 ACPI: Interpreter disabled. initcall acpi_init+0x0/0xb6 returned -19 after XX usecs calling dock_init+0x0/0xa5 @ 1 initcall dock_init+0x0/0xa5 returned 0 after XX usecs calling acpi_pci_root_init+0x0/0x28 @ 1 initcall acpi_pci_root_init+0x0/0x28 returned 0 after XX usecs calling acpi_pci_link_init+0x0/0x3e @ 1 initcall acpi_pci_link_init+0x0/0x3e returned 0 after XX usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after XX usecs calling xen_setup_shutdown_event+0x0/0x22 @ 1 initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after XX usecs calling balloon_init+0x0/0x130 @ 1 xen/balloon: Initialising balloon driver. last_pfn = 0x100800 max_arch_pfn = 0x400000000 initcall balloon_init+0x0/0x130 returned 0 after XX usecs calling xenbus_probe_backend_init+0x0/0x2d @ 1 initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after XX usecs calling xenbus_probe_frontend_init+0x0/0x2d @ 1 initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after XX usecs calling balloon_init+0x0/0x100 @ 1 xen-balloon: Initialising balloon driver. initcall balloon_init+0x0/0x100 returned 0 after XX usecs calling misc_init+0x0/0xb7 @ 1 initcall misc_init+0x0/0xb7 returned 0 after XX usecs calling vga_arb_device_init+0x0/0xe4 @ 1 vgaarb: loaded initcall vga_arb_device_init+0x0/0xe4 returned 0 after XX usecs calling init_scsi+0x0/0x7c @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x7c returned 0 after XX usecs calling ata_init+0x0/0x349 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x349 returned 0 after XX usecs calling usb_init+0x0/0x15f @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x15f returned 0 after XX usecs calling serio_init+0x0/0x31 @ 1 initcall serio_init+0x0/0x31 returned 0 after XX usecs calling input_init+0x0/0x10c @ 1 initcall input_init+0x0/0x10c returned 0 after XX usecs calling rtc_init+0x0/0x6a @ 1 initcall rtc_init+0x0/0x6a returned 0 after XX usecs calling power_supply_class_init+0x0/0x40 @ 1 initcall power_supply_class_init+0x0/0x40 returned 0 after XX usecs calling hwmon_init+0x0/0xee @ 1 initcall hwmon_init+0x0/0xee returned 0 after XX usecs calling md_init+0x0/0x144 @ 1 initcall md_init+0x0/0x144 returned 0 after XX usecs calling init_soundcore+0x0/0x34 @ 1 initcall init_soundcore+0x0/0x34 returned 0 after XX usecs calling alsa_sound_init+0x0/0x90 @ 1 Advanced Linux Sound Architecture Driver Version 1.0.24. initcall alsa_sound_init+0x0/0x90 returned 0 after XX usecs calling pci_subsys_init+0x0/0x4d @ 1 PCI: System does not support PCI PCI: System does not support PCI initcall pci_subsys_init+0x0/0x4d returned 0 after XX usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after XX usecs calling net_dev_init+0x0/0x1d9 @ 1 initcall net_dev_init+0x0/0x1d9 returned 0 after XX usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after XX usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after XX usecs calling pktsched_init+0x0/0xed @ 1 initcall pktsched_init+0x0/0xed returned 0 after XX usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after XX usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after XX usecs calling genl_init+0x0/0x93 @ 1 initcall genl_init+0x0/0x93 returned 0 after XX usecs calling sysctl_init+0x0/0x48 @ 1 initcall sysctl_init+0x0/0x48 returned 0 after XX usecs calling print_ICs+0x0/0x510 @ 1 initcall print_ICs+0x0/0x510 returned 0 after XX usecs calling hpet_late_init+0x0/0xf4 @ 1 initcall hpet_late_init+0x0/0xf4 returned -19 after XX usecs calling init_amd_nbs+0x0/0xba @ 1 initcall init_amd_nbs+0x0/0xba returned 0 after XX usecs calling clocksource_done_booting+0x0/0x5a @ 1 Switching to clocksource xen initcall clocksource_done_booting+0x0/0x5a returned 0 after XX usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after XX usecs calling tracer_init_debugfs+0x0/0x36b @ 1 initcall tracer_init_debugfs+0x0/0x36b returned 0 after XX usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after XX usecs calling event_trace_init+0x0/0x2bd @ 1 initcall event_trace_init+0x0/0x2bd returned 0 after XX usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after XX usecs calling eventpoll_init+0x0/0xda @ 1 initcall eventpoll_init+0x0/0xda returned 0 after XX usecs calling anon_inode_init+0x0/0x12e @ 1 initcall anon_inode_init+0x0/0x12e returned 0 after XX usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after XX usecs calling acpi_event_init+0x0/0x52 @ 1 initcall acpi_event_init+0x0/0x52 returned 0 after XX usecs calling pnp_system_init+0x0/0x12 @ 1 initcall pnp_system_init+0x0/0x12 returned 0 after XX usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI: disabled initcall pnpacpi_init+0x0/0x8c returned 0 after XX usecs calling chr_dev_init+0x0/0xc1 @ 1 Switched to NOHz mode on CPU #0 initcall chr_dev_init+0x0/0xc1 returned 0 after XX usecs calling firmware_class_init+0x0/0x19 @ 1 initcall firmware_class_init+0x0/0x19 returned 0 after XX usecs calling thermal_init+0x0/0x75 @ 1 initcall thermal_init+0x0/0x75 returned 0 after XX usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after XX usecs calling init_acpi_pm_clocksource+0x0/0xe0 @ 1 initcall init_acpi_pm_clocksource+0x0/0xe0 returned -19 after XX usecs calling pcibios_assign_resources+0x0/0x74 @ 1 PCI: max bus depth: 0 pci_try_num: 1 initcall pcibios_assign_resources+0x0/0x74 returned 0 after XX usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after XX usecs calling inet_init+0x0/0x286 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) initcall inet_init+0x0/0x286 returned 0 after XX usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after XX usecs calling init_sunrpc+0x0/0x73 @ 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x73 returned 0 after XX usecs calling pci_apply_final_quirks+0x0/0x106 @ 1 PCI: CLS 0 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x106 returned 0 after XX usecs calling populate_rootfs+0x0/0x9e @ 1 initcall populate_rootfs+0x0/0x9e returned 0 after XX usecs calling pci_iommu_init+0x0/0x41 @ 1 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff88000b000000 - ffff88000f000000 software IO TLB at phys 0xb000000 - 0xf000000 initcall pci_iommu_init+0x0/0x41 returned 0 after XX usecs calling irqfd_module_init+0x0/0x31 @ 1 initcall irqfd_module_init+0x0/0x31 returned 0 after XX usecs calling svm_init+0x0/0x1e @ 1 has_svm: svm not available kvm: no hardware support initcall svm_init+0x0/0x1e returned -95 after XX usecs initcall svm_init+0x0/0x1e returned with error code -95 calling i8259A_init_ops+0x0/0x21 @ 1 initcall i8259A_init_ops+0x0/0x21 returned 0 after XX usecs calling vsyscall_init+0x0/0x66 @ 1 initcall vsyscall_init+0x0/0x66 returned 0 after XX usecs calling sbf_init+0x0/0xe9 @ 1 initcall sbf_init+0x0/0xe9 returned 0 after XX usecs calling init_tsc_clocksource+0x0/0x5f @ 1 initcall init_tsc_clocksource+0x0/0x5f returned 0 after XX usecs calling add_rtc_cmos+0x0/0x97 @ 1 platform rtc_cmos: registered platform RTC device (no PNP device found) initcall add_rtc_cmos+0x0/0x97 returned 0 after XX usecs calling i8237A_init_ops+0x0/0x14 @ 1 initcall i8237A_init_ops+0x0/0x14 returned 0 after XX usecs calling cache_sysfs_init+0x0/0x64 @ 1 initcall cache_sysfs_init+0x0/0x64 returned 0 after XX usecs calling mcheck_init_device+0x0/0x100 @ 1 initcall mcheck_init_device+0x0/0x100 returned -5 after XX usecs initcall mcheck_init_device+0x0/0x100 returned with error code -5 calling threshold_init_device+0x0/0x4f @ 1 initcall threshold_init_device+0x0/0x4f returned 0 after XX usecs calling thermal_throttle_init_device+0x0/0x9b @ 1 initcall thermal_throttle_init_device+0x0/0x9b returned 0 after XX usecs calling ioapic_init_ops+0x0/0x14 @ 1 initcall ioapic_init_ops+0x0/0x14 returned 0 after XX usecs calling add_pcspkr+0x0/0x3a @ 1 initcall add_pcspkr+0x0/0x3a returned 0 after XX usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after XX usecs calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after XX usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after XX usecs calling init_sched_debug_procfs+0x0/0x2c @ 1 initcall init_sched_debug_procfs+0x0/0x2c returned 0 after XX usecs calling proc_schedstat_init+0x0/0x22 @ 1 initcall proc_schedstat_init+0x0/0x22 returned 0 after XX usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after XX usecs calling ioresources_init+0x0/0x3c @ 1 initcall ioresources_init+0x0/0x3c returned 0 after XX usecs calling uid_cache_init+0x0/0x8d @ 1 initcall uid_cache_init+0x0/0x8d returned 0 after XX usecs calling init_posix_timers+0x0/0x1cf @ 1 initcall init_posix_timers+0x0/0x1cf returned 0 after XX usecs calling init_posix_cpu_timers+0x0/0xbf @ 1 initcall init_posix_cpu_timers+0x0/0xbf returned 0 after XX usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after XX usecs calling timekeeping_init_ops+0x0/0x14 @ 1 initcall timekeeping_init_ops+0x0/0x14 returned 0 after XX usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after XX usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after XX usecs calling alarmtimer_init+0x0/0x147 @ 1 initcall alarmtimer_init+0x0/0x147 returned 0 after XX usecs calling init_tstats_procfs+0x0/0x2c @ 1 initcall init_tstats_procfs+0x0/0x2c returned 0 after XX usecs calling futex_init+0x0/0x5d @ 1 initcall futex_init+0x0/0x5d returned 0 after XX usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after XX usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after XX usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after XX usecs calling ikconfig_init+0x0/0x3a @ 1 initcall ikconfig_init+0x0/0x3a returned 0 after XX usecs calling hung_task_init+0x0/0x56 @ 1 initcall hung_task_init+0x0/0x56 returned 0 after XX usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after XX usecs calling init_tracepoints+0x0/0x12 @ 1 initcall init_tracepoints+0x0/0x12 returned 0 after XX usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after XX usecs calling init_events+0x0/0x61 @ 1 initcall init_events+0x0/0x61 returned 0 after XX usecs calling init_mmio_trace+0x0/0x12 @ 1 initcall init_mmio_trace+0x0/0x12 returned 0 after XX usecs calling init_blk_tracer+0x0/0x55 @ 1 initcall init_blk_tracer+0x0/0x55 returned 0 after XX usecs calling perf_event_sysfs_init+0x0/0x93 @ 1 initcall perf_event_sysfs_init+0x0/0x93 returned 0 after XX usecs calling init_per_zone_wmark_min+0x0/0x88 @ 1 initcall init_per_zone_wmark_min+0x0/0x88 returned 0 after XX usecs calling kswapd_init+0x0/0x20 @ 1 initcall kswapd_init+0x0/0x20 returned 0 after XX usecs calling extfrag_debug_init+0x0/0x7b @ 1 initcall extfrag_debug_init+0x0/0x7b returned 0 after XX usecs calling setup_vmstat+0x0/0xc0 @ 1 initcall setup_vmstat+0x0/0xc0 returned 0 after XX usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after XX usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after XX usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after XX usecs calling hugetlb_init+0x0/0x3db @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x3db returned 0 after XX usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after XX usecs calling cpucache_init+0x0/0x40 @ 1 initcall cpucache_init+0x0/0x40 returned 0 after XX usecs calling hugepage_init+0x0/0x12a @ 1 initcall hugepage_init+0x0/0x12a returned -22 after XX usecs initcall hugepage_init+0x0/0x12a returned with error code -22 calling init_cleancache+0x0/0x1b @ 1 initcall init_cleancache+0x0/0x1b returned 0 after XX usecs calling fcntl_init+0x0/0x2a @ 1 initcall fcntl_init+0x0/0x2a returned 0 after XX usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after XX usecs calling fsnotify_mark_init+0x0/0x40 @ 1 initcall fsnotify_mark_init+0x0/0x40 returned 0 after XX usecs calling dnotify_init+0x0/0x7b @ 1 initcall dnotify_init+0x0/0x7b returned 0 after XX usecs calling inotify_user_setup+0x0/0x70 @ 1 initcall inotify_user_setup+0x0/0x70 returned 0 after XX usecs calling aio_setup+0x0/0x78 @ 1 initcall aio_setup+0x0/0x78 returned 0 after XX usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after XX usecs calling init_sys32_ioctl+0x0/0x28 @ 1 initcall init_sys32_ioctl+0x0/0x28 returned 0 after XX usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after XX usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after XX usecs calling proc_consoles_init+0x0/0x22 @ 1 initcall proc_consoles_init+0x0/0x22 returned 0 after XX usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after XX usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after XX usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after XX usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after XX usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after XX usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after XX usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after XX usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after XX usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after XX usecs calling proc_kcore_init+0x0/0xa9 @ 1 initcall proc_kcore_init+0x0/0xa9 returned 0 after XX usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after XX usecs calling proc_page_init+0x0/0x42 @ 1 initcall proc_page_init+0x0/0x42 returned 0 after XX usecs calling configfs_init+0x0/0xb3 @ 1 initcall configfs_init+0x0/0xb3 returned 0 after XX usecs calling init_devpts_fs+0x0/0x4c @ 1 initcall init_devpts_fs+0x0/0x4c returned 0 after XX usecs calling init_ext3_fs+0x0/0x6f @ 1 initcall init_ext3_fs+0x0/0x6f returned 0 after XX usecs calling init_ext2_fs+0x0/0x6f @ 1 initcall init_ext2_fs+0x0/0x6f returned 0 after XX usecs calling ext4_init_fs+0x0/0x20c @ 1 initcall ext4_init_fs+0x0/0x20c returned 0 after XX usecs calling journal_init+0x0/0x97 @ 1 initcall journal_init+0x0/0x97 returned 0 after XX usecs calling journal_init+0x0/0x104 @ 1 initcall journal_init+0x0/0x104 returned 0 after XX usecs calling init_squashfs_fs+0x0/0x66 @ 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher initcall init_squashfs_fs+0x0/0x66 returned 0 after XX usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after XX usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after XX usecs calling init_fat_fs+0x0/0x4f @ 1 initcall init_fat_fs+0x0/0x4f returned 0 after XX usecs calling init_vfat_fs+0x0/0x12 @ 1 initcall init_vfat_fs+0x0/0x12 returned 0 after XX usecs calling init_iso9660_fs+0x0/0x5c @ 1 initcall init_iso9660_fs+0x0/0x5c returned 0 after XX usecs calling init_nfs_fs+0x0/0x10e @ 1 initcall init_nfs_fs+0x0/0x10e returned 0 after XX usecs calling init_nfsd+0x0/0xbb @ 1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). initcall init_nfsd+0x0/0xbb returned 0 after XX usecs calling init_nlm+0x0/0x22 @ 1 initcall init_nlm+0x0/0x22 returned 0 after XX usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after XX usecs calling init_nls_cp850+0x0/0x12 @ 1 initcall init_nls_cp850+0x0/0x12 returned 0 after XX usecs calling init_nls_cp932+0x0/0x12 @ 1 initcall init_nls_cp932+0x0/0x12 returned 0 after XX usecs calling init_nls_euc_jp+0x0/0x48 @ 1 initcall init_nls_euc_jp+0x0/0x48 returned 0 after XX usecs calling init_nls_iso8859_1+0x0/0x12 @ 1 initcall init_nls_iso8859_1+0x0/0x12 returned 0 after XX usecs calling init_nls_iso8859_15+0x0/0x12 @ 1 initcall init_nls_iso8859_15+0x0/0x12 returned 0 after XX usecs calling init_nls_utf8+0x0/0x29 @ 1 initcall init_nls_utf8+0x0/0x29 returned 0 after XX usecs calling init_ntfs_fs+0x0/0x1d1 @ 1 NTFS driver 2.1.30 [Flags: R/W]. initcall init_ntfs_fs+0x0/0x1d1 returned 0 after XX usecs calling init_autofs4_fs+0x0/0x26 @ 1 initcall init_autofs4_fs+0x0/0x26 returned 0 after XX usecs calling fuse_init+0x0/0x141 @ 1 fuse init (API version 7.16) initcall fuse_init+0x0/0x141 returned 0 after XX usecs calling init_udf_fs+0x0/0x5c @ 1 initcall init_udf_fs+0x0/0x5c returned 0 after XX usecs calling init_xfs_fs+0x0/0xa9 @ 1 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled initcall init_xfs_fs+0x0/0xa9 returned 0 after XX usecs calling ipc_init+0x0/0x23 @ 1 msgmni has been set to 342 initcall ipc_init+0x0/0x23 returned 0 after XX usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after XX usecs calling key_proc_init+0x0/0x33 @ 1 initcall key_proc_init+0x0/0x33 returned 0 after XX usecs calling crypto_wq_init+0x0/0x31 @ 1 initcall crypto_wq_init+0x0/0x31 returned 0 after XX usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after XX usecs calling skcipher_module_init+0x0/0x36 @ 1 initcall skcipher_module_init+0x0/0x36 returned 0 after XX usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after XX usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after XX usecs calling seqiv_module_init+0x0/0x12 @ 1 initcall seqiv_module_init+0x0/0x12 returned 0 after XX usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after XX usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after XX usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after XX usecs calling sha256_generic_mod_init+0x0/0x3f @ 1 initcall sha256_generic_mod_init+0x0/0x3f returned 0 after XX usecs calling crypto_cbc_module_init+0x0/0x12 @ 1 initcall crypto_cbc_module_init+0x0/0x12 returned 0 after XX usecs calling crypto_ctr_module_init+0x0/0x3e @ 1 initcall crypto_ctr_module_init+0x0/0x3e returned 0 after XX usecs calling cryptd_init+0x0/0xc5 @ 1 initcall cryptd_init+0x0/0xc5 returned 0 after XX usecs calling des_generic_mod_init+0x0/0x3f @ 1 initcall des_generic_mod_init+0x0/0x3f returned 0 after XX usecs calling blowfish_mod_init+0x0/0x12 @ 1 initcall blowfish_mod_init+0x0/0x12 returned 0 after XX usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after XX usecs calling krng_mod_init+0x0/0x12 @ 1 initcall krng_mod_init+0x0/0x12 returned 0 after XX usecs calling async_pq_init+0x0/0x44 @ 1 initcall async_pq_init+0x0/0x44 returned 0 after XX usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after XX usecs calling init_cgroup_blkio+0x0/0x12 @ 1 initcall init_cgroup_blkio+0x0/0x12 returned 0 after XX usecs calling throtl_init+0x0/0x44 @ 1 initcall throtl_init+0x0/0x44 returned 0 after XX usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after XX usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after XX usecs calling cfq_init+0x0/0xb3 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0xb3 returned 0 after XX usecs calling init_kmp+0x0/0x12 @ 1 initcall init_kmp+0x0/0x12 returned 0 after XX usecs calling init_bm+0x0/0x12 @ 1 initcall init_bm+0x0/0x12 returned 0 after XX usecs calling init_fsm+0x0/0x12 @ 1 initcall init_fsm+0x0/0x12 returned 0 after XX usecs calling percpu_counter_startup+0x0/0x19 @ 1 initcall percpu_counter_startup+0x0/0x19 returned 0 after XX usecs calling pci_proc_init+0x0/0x6b @ 1 initcall pci_proc_init+0x0/0x6b returned 0 after XX usecs calling pcie_portdrv_init+0x0/0x7a @ 1 initcall pcie_portdrv_init+0x0/0x7a returned 0 after XX usecs calling aer_service_init+0x0/0x22 @ 1 initcall aer_service_init+0x0/0x22 returned 0 after XX usecs calling pcie_pme_service_init+0x0/0x12 @ 1 initcall pcie_pme_service_init+0x0/0x12 returned 0 after XX usecs calling ioapic_init+0x0/0x1b @ 1 initcall ioapic_init+0x0/0x1b returned 0 after XX usecs calling pcifront_init+0x0/0x5c @ 1 initcall pcifront_init+0x0/0x5c returned 0 after XX usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after XX usecs calling irqrouter_init_ops+0x0/0x26 @ 1 initcall irqrouter_init_ops+0x0/0x26 returned 0 after XX usecs calling acpi_button_init+0x0/0x12 @ 1 initcall acpi_button_init+0x0/0x12 returned -19 after XX usecs calling acpi_fan_init+0x0/0x18 @ 1 initcall acpi_fan_init+0x0/0x18 returned -19 after XX usecs calling acpi_pci_slot_init+0x0/0x20 @ 1 initcall acpi_pci_slot_init+0x0/0x20 returned 0 after XX usecs calling acpi_processor_init+0x0/0xcd @ 1 initcall acpi_processor_init+0x0/0xcd returned 0 after XX usecs calling acpi_container_init+0x0/0x4a @ 1 initcall acpi_container_init+0x0/0x4a returned -19 after XX usecs calling acpi_thermal_init+0x0/0x42 @ 1 initcall acpi_thermal_init+0x0/0x42 returned -19 after XX usecs calling xenbus_probe_initcall+0x0/0x3b @ 1 initcall xenbus_probe_initcall+0x0/0x3b returned 0 after XX usecs calling xen_tmem_init+0x0/0x5c @ 1 initcall xen_tmem_init+0x0/0x5c returned 0 after XX usecs calling evtchn_init+0x0/0x6e @ 1 Event-channel device installed. initcall evtchn_init+0x0/0x6e returned 0 after XX usecs calling xenfs_init+0x0/0x2d @ 1 initcall xenfs_init+0x0/0x2d returned 0 after XX usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned 0 after XX usecs calling hyper_sysfs_init+0x0/0xbf @ 1 initcall hyper_sysfs_init+0x0/0xbf returned 0 after XX usecs calling pty_init+0x0/0x26a @ 1 initcall pty_init+0x0/0x26a returned 0 after XX usecs calling sysrq_init+0x0/0x68 @ 1 initcall sysrq_init+0x0/0x68 returned 0 after XX usecs calling xen_hvc_init+0x0/0x144 @ 1 initcall xen_hvc_init+0x0/0x144 returned 0 after XX usecs calling serial8250_init+0x0/0x18e @ 1 Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled initcall serial8250_init+0x0/0x18e returned 0 after XX usecs calling serial8250_pnp_init+0x0/0x12 @ 1 initcall serial8250_pnp_init+0x0/0x12 returned 0 after XX usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after XX usecs calling rand_initialize+0x0/0x2c @ 1 initcall rand_initialize+0x0/0x2c returned 0 after XX usecs calling hpet_init+0x0/0x6a @ 1 initcall hpet_init+0x0/0x6a returned -19 after XX usecs calling topology_sysfs_init+0x0/0x50 @ 1 initcall topology_sysfs_init+0x0/0x50 returned 0 after XX usecs calling loop_init+0x0/0x231 @ 1 loop: module loaded initcall loop_init+0x0/0x231 returned 0 after XX usecs calling init_cryptoloop+0x0/0x2f @ 1 initcall init_cryptoloop+0x0/0x2f returned 0 after XX usecs calling xlblk_init+0x0/0x81 @ 1 blkfront: xvda1: flush diskcache: enabled initcall xlblk_init+0x0/0x81 returned 0 after XX usecs calling xen_blkif_init+0x0/0x276 @ 1 initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs calling init_sd+0x0/0x112 @ 1 blkfront: xvda2: flush diskcache: enabled initcall init_sd+0x0/0x112 returned 0 after XX usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after XX usecs calling init_sg+0x0/0xc7 @ 1 initcall init_sg+0x0/0xc7 returned 0 after XX usecs calling ahci_init+0x0/0x1b @ 1 initcall ahci_init+0x0/0x1b returned 0 after XX usecs calling piix_init+0x0/0x29 @ 1 initcall piix_init+0x0/0x29 returned 0 after XX usecs calling mv_init+0x0/0x45 @ 1 initcall mv_init+0x0/0x45 returned 0 after XX usecs calling nv_init+0x0/0x1b @ 1 initcall nv_init+0x0/0x1b returned 0 after XX usecs calling svia_init+0x0/0x1b @ 1 initcall svia_init+0x0/0x1b returned 0 after XX usecs calling amd_init+0x0/0x1b @ 1 initcall amd_init+0x0/0x1b returned 0 after XX usecs calling pdc2027x_init+0x0/0x1b @ 1 initcall pdc2027x_init+0x0/0x1b returned 0 after XX usecs calling sil680_init+0x0/0x1b @ 1 initcall sil680_init+0x0/0x1b returned 0 after XX usecs calling via_init+0x0/0x1b @ 1 initcall via_init+0x0/0x1b returned 0 after XX usecs calling e1000_init_module+0x0/0x87 @ 1 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. initcall e1000_init_module+0x0/0x87 returned 0 after XX usecs calling e1000_init_module+0x0/0x3e @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 e1000e: Copyright(c) 1999 - 2011 Intel Corporation. initcall e1000_init_module+0x0/0x3e returned 0 after XX usecs calling e100_init_module+0x0/0x5d @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x5d returned 0 after XX usecs calling net_olddevs_init+0x0/0x9e @ 1 initcall net_olddevs_init+0x0/0x9e returned 0 after XX usecs calling ppp_init+0x0/0xe4 @ 1 PPP generic driver version 2.4.2 initcall ppp_init+0x0/0xe4 returned 0 after XX usecs calling ppp_async_init+0x0/0x36 @ 1 initcall ppp_async_init+0x0/0x36 returned 0 after XX usecs calling ppp_sync_init+0x0/0x36 @ 1 initcall ppp_sync_init+0x0/0x36 returned 0 after XX usecs calling deflate_init+0x0/0x3b @ 1 PPP Deflate Compression module registered initcall deflate_init+0x0/0x3b returned 0 after XX usecs calling bsdcomp_init+0x0/0x2f @ 1 PPP BSD Compression module registered initcall bsdcomp_init+0x0/0x2f returned 0 after XX usecs calling pppox_init+0x0/0x12 @ 1 NET: Registered protocol family 24 initcall pppox_init+0x0/0x12 returned 0 after XX usecs calling pppoe_init+0x0/0x87 @ 1 initcall pppoe_init+0x0/0x87 returned 0 after XX usecs calling netif_init+0x0/0x66 @ 1 Initialising Xen virtual ethernet driver. initcall netif_init+0x0/0x66 returned 0 after XX usecs calling netback_init+0x0/0x219 @ 1 initcall netback_init+0x0/0x219 returned 0 after XX usecs calling dummy_init_module+0x0/0xaa @ 1 initcall dummy_init_module+0x0/0xaa returned 0 after XX usecs calling ifb_init_module+0x0/0xad @ 1 initcall ifb_init_module+0x0/0xad returned 0 after XX usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after XX usecs calling rtl8139_init_module+0x0/0x1b @ 1 initcall rtl8139_init_module+0x0/0x1b returned 0 after XX usecs calling tun_init+0x0/0x93 @ 1 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> initcall tun_init+0x0/0x93 returned 0 after XX usecs calling rtl8169_init_module+0x0/0x1b @ 1 initcall rtl8169_init_module+0x0/0x1b returned 0 after XX usecs calling cdc_init+0x0/0x1b @ 1 usbcore: registered new interface driver cdc_ether initcall cdc_init+0x0/0x1b returned 0 after XX usecs calling cdc_subset_init+0x0/0x1b @ 1 usbcore: registered new interface driver cdc_subset initcall cdc_subset_init+0x0/0x1b returned 0 after XX usecs calling zaurus_init+0x0/0x1b @ 1 usbcore: registered new interface driver zaurus initcall zaurus_init+0x0/0x1b returned 0 after XX usecs calling usbnet_init+0x0/0x2b @ 1 initcall usbnet_init+0x0/0x2b returned 0 after XX usecs calling cdc_ncm_init+0x0/0x29 @ 1 cdc_ncm: 01-June-2011 usbcore: registered new interface driver cdc_ncm initcall cdc_ncm_init+0x0/0x29 returned 0 after XX usecs calling de_init+0x0/0x1b @ 1 initcall de_init+0x0/0x1b returned 0 after XX usecs calling tulip_init+0x0/0x33 @ 1 initcall tulip_init+0x0/0x33 returned 0 after XX usecs calling de4x5_module_init+0x0/0x1b @ 1 initcall de4x5_module_init+0x0/0x1b returned 0 after XX usecs calling init_netconsole+0x0/0x23e @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x23e returned 0 after XX usecs calling cdrom_init+0x0/0xd @ 1 initcall cdrom_init+0x0/0xd returned 0 after XX usecs calling mon_init+0x0/0xfc @ 1 initcall mon_init+0x0/0xfc returned 0 after XX usecs calling ehci_hcd_init+0x0/0x78 @ 1 ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver initcall ehci_hcd_init+0x0/0x78 returned 0 after XX usecs calling ohci_hcd_mod_init+0x0/0x54 @ 1 ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x54 returned 0 after XX usecs calling uhci_hcd_init+0x0/0xc6 @ 1 uhci_hcd: USB Universal Host Controller Interface driver initcall uhci_hcd_init+0x0/0xc6 returned 0 after XX usecs calling acm_init+0x0/0xfd @ 1 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters initcall acm_init+0x0/0xfd returned 0 after XX usecs calling usblp_init+0x0/0x1b @ 1 usbcore: registered new interface driver usblp initcall usblp_init+0x0/0x1b returned 0 after XX usecs calling usb_serial_init+0x0/0x1e5 @ 1 usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core initcall usb_serial_init+0x0/0x1e5 returned 0 after XX usecs calling pl2303_init+0x0/0x58 @ 1 USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver initcall pl2303_init+0x0/0x58 returned 0 after XX usecs calling i8042_init+0x0/0x3a2 @ 1 i8042: PNP: No PS/2 controller found. Probing ports directly. i8042: No controller found initcall i8042_init+0x0/0x3a2 returned -19 after XX usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after XX usecs calling mousedev_init+0x0/0x8e @ 1 mousedev: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x8e returned 0 after XX usecs calling joydev_init+0x0/0x12 @ 1 initcall joydev_init+0x0/0x12 returned 0 after XX usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after XX usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after XX usecs calling cmos_init+0x0/0x6a @ 1 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of rtc_cmos failed with error -38 initcall cmos_init+0x0/0x6a returned -19 after XX usecs calling i2c_dev_init+0x0/0xca @ 1 i2c /dev entries driver initcall i2c_dev_init+0x0/0xca returned 0 after XX usecs calling i2c_piix4_init+0x0/0x1b @ 1 initcall i2c_piix4_init+0x0/0x1b returned 0 after XX usecs calling sm_it87_init+0x0/0x3f5 @ 1 initcall sm_it87_init+0x0/0x3f5 returned -19 after XX usecs calling k8temp_init+0x0/0x1b @ 1 initcall k8temp_init+0x0/0x1b returned 0 after XX usecs calling sm_vt8231_init+0x0/0x1b @ 1 initcall sm_vt8231_init+0x0/0x1b returned 0 after XX usecs calling raid_init+0x0/0x12 @ 1 md: raid1 personality registered for level 1 initcall raid_init+0x0/0x12 returned 0 after XX usecs calling raid5_init+0x0/0x2c @ 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 initcall raid5_init+0x0/0x2c returned 0 after XX usecs calling dm_init+0x0/0x46 @ 1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com initcall dm_init+0x0/0x46 returned 0 after XX usecs calling dm_crypt_init+0x0/0x69 @ 1 initcall dm_crypt_init+0x0/0x69 returned 0 after XX usecs calling dm_snapshot_init+0x0/0x205 @ 1 initcall dm_snapshot_init+0x0/0x205 returned 0 after XX usecs calling dm_mirror_init+0x0/0x79 @ 1 initcall dm_mirror_init+0x0/0x79 returned 0 after XX usecs calling dm_dirty_log_init+0x0/0x59 @ 1 initcall dm_dirty_log_init+0x0/0x59 returned 0 after XX usecs calling cpufreq_stats_init+0x0/0x9d @ 1 initcall cpufreq_stats_init+0x0/0x9d returned 0 after XX usecs calling cpufreq_gov_dbs_init+0x0/0x5e @ 1 initcall cpufreq_gov_dbs_init+0x0/0x5e returned 0 after XX usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after XX usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after XX usecs calling hid_init+0x0/0x4d @ 1 initcall hid_init+0x0/0x4d returned 0 after XX usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after XX usecs calling apple_init+0x0/0x38 @ 1 initcall apple_init+0x0/0x38 returned 0 after XX usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after XX usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after XX usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after XX usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after XX usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after XX usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after XX usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after XX usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after XX usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after XX usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after XX usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after XX usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after XX usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after XX usecs calling ortek_init+0x0/0x1b @ 1 initcall ortek_init+0x0/0x1b returned 0 after XX usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after XX usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after XX usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after XX usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after XX usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after XX usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after XX usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after XX usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after XX usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after XX usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after XX usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after XX usecs calling hid_init+0x0/0x79 @ 1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0x79 returned 0 after XX usecs calling staging_init+0x0/0x8 @ 1 initcall staging_init+0x0/0x8 returned 0 after XX usecs calling alsa_hwdep_init+0x0/0x64 @ 1 initcall alsa_hwdep_init+0x0/0x64 returned 0 after XX usecs calling alsa_timer_init+0x0/0x146 @ 1 initcall alsa_timer_init+0x0/0x146 returned 0 after XX usecs calling alsa_pcm_init+0x0/0x6c @ 1 initcall alsa_pcm_init+0x0/0x6c returned 0 after XX usecs calling snd_mem_init+0x0/0x2c @ 1 initcall snd_mem_init+0x0/0x2c returned 0 after XX usecs calling patch_realtek_init+0x0/0x12 @ 1 initcall patch_realtek_init+0x0/0x12 returned 0 after XX usecs calling patch_cmedia_init+0x0/0x12 @ 1 initcall patch_cmedia_init+0x0/0x12 returned 0 after XX usecs calling patch_analog_init+0x0/0x12 @ 1 initcall patch_analog_init+0x0/0x12 returned 0 after XX usecs calling patch_sigmatel_init+0x0/0x12 @ 1 initcall patch_sigmatel_init+0x0/0x12 returned 0 after XX usecs calling patch_si3054_init+0x0/0x12 @ 1 initcall patch_si3054_init+0x0/0x12 returned 0 after XX usecs calling patch_cirrus_init+0x0/0x12 @ 1 initcall patch_cirrus_init+0x0/0x12 returned 0 after XX usecs calling patch_ca0110_init+0x0/0x12 @ 1 initcall patch_ca0110_init+0x0/0x12 returned 0 after XX usecs calling patch_conexant_init+0x0/0x12 @ 1 initcall patch_conexant_init+0x0/0x12 returned 0 after XX usecs calling patch_via_init+0x0/0x12 @ 1 initcall patch_via_init+0x0/0x12 returned 0 after XX usecs calling patch_hdmi_init+0x0/0x12 @ 1 initcall patch_hdmi_init+0x0/0x12 returned 0 after XX usecs calling alsa_card_azx_init+0x0/0x1b @ 1 initcall alsa_card_azx_init+0x0/0x1b returned 0 after XX usecs calling alsa_sound_last_init+0x0/0x6f @ 1 ALSA device list: No soundcards found. initcall alsa_sound_last_init+0x0/0x6f returned 0 after XX usecs calling llc_init+0x0/0x20 @ 1 initcall llc_init+0x0/0x20 returned 0 after XX usecs calling snap_init+0x0/0x39 @ 1 initcall snap_init+0x0/0x39 returned 0 after XX usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after XX usecs calling police_init_module+0x0/0x12 @ 1 initcall police_init_module+0x0/0x12 returned 0 after XX usecs calling cbq_module_init+0x0/0x12 @ 1 initcall cbq_module_init+0x0/0x12 returned 0 after XX usecs calling htb_module_init+0x0/0x12 @ 1 initcall htb_module_init+0x0/0x12 returned 0 after XX usecs calling red_module_init+0x0/0x12 @ 1 initcall red_module_init+0x0/0x12 returned 0 after XX usecs calling gred_module_init+0x0/0x12 @ 1 initcall gred_module_init+0x0/0x12 returned 0 after XX usecs calling ingress_module_init+0x0/0x12 @ 1 initcall ingress_module_init+0x0/0x12 returned 0 after XX usecs calling dsmark_module_init+0x0/0x12 @ 1 initcall dsmark_module_init+0x0/0x12 returned 0 after XX usecs calling sfb_module_init+0x0/0x12 @ 1 initcall sfb_module_init+0x0/0x12 returned 0 after XX usecs calling sfq_module_init+0x0/0x12 @ 1 initcall sfq_module_init+0x0/0x12 returned 0 after XX usecs calling tbf_module_init+0x0/0x12 @ 1 initcall tbf_module_init+0x0/0x12 returned 0 after XX usecs calling teql_init+0x0/0xf1 @ 1 initcall teql_init+0x0/0xf1 returned 0 after XX usecs calling prio_module_init+0x0/0x12 @ 1 initcall prio_module_init+0x0/0x12 returned 0 after XX usecs calling mqprio_module_init+0x0/0x12 @ 1 initcall mqprio_module_init+0x0/0x12 returned 0 after XX usecs calling choke_module_init+0x0/0x12 @ 1 initcall choke_module_init+0x0/0x12 returned 0 after XX usecs calling init_u32+0x0/0x2e @ 1 u32 classifier Actions configured initcall init_u32+0x0/0x2e returned 0 after XX usecs calling init_route4+0x0/0x12 @ 1 initcall init_route4+0x0/0x12 returned 0 after XX usecs calling init_fw+0x0/0x12 @ 1 initcall init_fw+0x0/0x12 returned 0 after XX usecs calling init_rsvp+0x0/0x12 @ 1 initcall init_rsvp+0x0/0x12 returned 0 after XX usecs calling init_tcindex+0x0/0x12 @ 1 initcall init_tcindex+0x0/0x12 returned 0 after XX usecs calling init_rsvp+0x0/0x12 @ 1 initcall init_rsvp+0x0/0x12 returned 0 after XX usecs calling init_basic+0x0/0x12 @ 1 initcall init_basic+0x0/0x12 returned 0 after XX usecs calling init_cgroup_cls+0x0/0x3c @ 1 initcall init_cgroup_cls+0x0/0x3c returned 0 after XX usecs calling nfnetlink_init+0x0/0x27 @ 1 Netfilter messages via NETLINK v0.30. initcall nfnetlink_init+0x0/0x27 returned 0 after XX usecs calling nfnetlink_queue_init+0x0/0xa4 @ 1 initcall nfnetlink_queue_init+0x0/0xa4 returned 0 after XX usecs calling nfnetlink_log_init+0x0/0xd7 @ 1 initcall nfnetlink_log_init+0x0/0xd7 returned 0 after XX usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 nf_conntrack version 0.5.0 (1370 buckets, 5480 max) initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after XX usecs calling ctnetlink_init+0x0/0x76 @ 1 ctnetlink v0.93: registering with nfnetlink. initcall ctnetlink_init+0x0/0x76 returned 0 after XX usecs calling nf_conntrack_ftp_init+0x0/0x1a4 @ 1 initcall nf_conntrack_ftp_init+0x0/0x1a4 returned 0 after XX usecs calling nf_conntrack_h323_init+0x0/0xd4 @ 1 initcall nf_conntrack_h323_init+0x0/0xd4 returned 0 after XX usecs calling nf_conntrack_irc_init+0x0/0x181 @ 1 initcall nf_conntrack_irc_init+0x0/0x181 returned 0 after XX usecs calling nf_conntrack_sip_init+0x0/0x1ca @ 1 initcall nf_conntrack_sip_init+0x0/0x1ca returned 0 after XX usecs calling xt_init+0x0/0x117 @ 1 initcall xt_init+0x0/0x117 returned 0 after XX usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after XX usecs calling mark_mt_init+0x0/0x40 @ 1 initcall mark_mt_init+0x0/0x40 returned 0 after XX usecs calling connmark_mt_init+0x0/0x40 @ 1 initcall connmark_mt_init+0x0/0x40 returned 0 after XX usecs calling classify_tg_init+0x0/0x17 @ 1 initcall classify_tg_init+0x0/0x17 returned 0 after XX usecs calling dscp_tg_init+0x0/0x17 @ 1 initcall dscp_tg_init+0x0/0x17 returned 0 after XX usecs calling hl_tg_init+0x0/0x17 @ 1 initcall hl_tg_init+0x0/0x17 returned 0 after XX usecs calling nflog_tg_init+0x0/0x12 @ 1 initcall nflog_tg_init+0x0/0x12 returned 0 after XX usecs calling nfqueue_tg_init+0x0/0x17 @ 1 initcall nfqueue_tg_init+0x0/0x17 returned 0 after XX usecs calling tcpmss_tg_init+0x0/0x17 @ 1 initcall tcpmss_tg_init+0x0/0x17 returned 0 after XX usecs calling comment_mt_init+0x0/0x12 @ 1 initcall comment_mt_init+0x0/0x12 returned 0 after XX usecs calling connbytes_mt_init+0x0/0x12 @ 1 initcall connbytes_mt_init+0x0/0x12 returned 0 after XX usecs calling connlimit_mt_init+0x0/0x17 @ 1 initcall connlimit_mt_init+0x0/0x17 returned 0 after XX usecs calling conntrack_mt_init+0x0/0x17 @ 1 initcall conntrack_mt_init+0x0/0x17 returned 0 after XX usecs calling dscp_mt_init+0x0/0x17 @ 1 initcall dscp_mt_init+0x0/0x17 returned 0 after XX usecs calling hashlimit_mt_init+0x0/0x8c @ 1 initcall hashlimit_mt_init+0x0/0x8c returned 0 after XX usecs calling helper_mt_init+0x0/0x12 @ 1 initcall helper_mt_init+0x0/0x12 returned 0 after XX usecs calling hl_mt_init+0x0/0x17 @ 1 initcall hl_mt_init+0x0/0x17 returned 0 after XX usecs calling length_mt_init+0x0/0x17 @ 1 initcall length_mt_init+0x0/0x17 returned 0 after XX usecs calling limit_mt_init+0x0/0x12 @ 1 initcall limit_mt_init+0x0/0x12 returned 0 after XX usecs calling mac_mt_init+0x0/0x12 @ 1 initcall mac_mt_init+0x0/0x12 returned 0 after XX usecs calling multiport_mt_init+0x0/0x17 @ 1 initcall multiport_mt_init+0x0/0x17 returned 0 after XX usecs calling xt_osf_init+0x0/0x8d @ 1 initcall xt_osf_init+0x0/0x8d returned 0 after XX usecs calling owner_mt_init+0x0/0x12 @ 1 initcall owner_mt_init+0x0/0x12 returned 0 after XX usecs calling pkttype_mt_init+0x0/0x12 @ 1 initcall pkttype_mt_init+0x0/0x12 returned 0 after XX usecs calling quota_mt_init+0x0/0x12 @ 1 initcall quota_mt_init+0x0/0x12 returned 0 after XX usecs calling realm_mt_init+0x0/0x12 @ 1 initcall realm_mt_init+0x0/0x12 returned 0 after XX usecs calling recent_mt_init+0x0/0x7a @ 1 initcall recent_mt_init+0x0/0x7a returned 0 after XX usecs calling state_mt_init+0x0/0x12 @ 1 initcall state_mt_init+0x0/0x12 returned 0 after XX usecs calling statistic_mt_init+0x0/0x12 @ 1 initcall statistic_mt_init+0x0/0x12 returned 0 after XX usecs calling string_mt_init+0x0/0x12 @ 1 initcall string_mt_init+0x0/0x12 returned 0 after XX usecs calling tcpmss_mt_init+0x0/0x17 @ 1 initcall tcpmss_mt_init+0x0/0x17 returned 0 after XX usecs calling u32_mt_init+0x0/0x12 @ 1 initcall u32_mt_init+0x0/0x12 returned 0 after XX usecs calling sysctl_ipv4_init+0x0/0x87 @ 1 initcall sysctl_ipv4_init+0x0/0x87 returned 0 after XX usecs calling ipip_init+0x0/0x60 @ 1 IPv4 over IPv4 tunneling driver initcall ipip_init+0x0/0x60 returned 0 after XX usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after XX usecs calling tunnel4_init+0x0/0x66 @ 1 initcall tunnel4_init+0x0/0x66 returned 0 after XX usecs calling ipv4_netfilter_init+0x0/0x12 @ 1 initcall ipv4_netfilter_init+0x0/0x12 returned 0 after XX usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after XX usecs calling nf_nat_init+0x0/0x111 @ 1 initcall nf_nat_init+0x0/0x111 returned 0 after XX usecs calling nf_defrag_init+0x0/0x17 @ 1 initcall nf_defrag_init+0x0/0x17 returned 0 after XX usecs calling nf_nat_ftp_init+0x0/0x1f @ 1 initcall nf_nat_ftp_init+0x0/0x1f returned 0 after XX usecs calling init+0x0/0xd7 @ 1 initcall init+0x0/0xd7 returned 0 after XX usecs calling nf_nat_irc_init+0x0/0x1f @ 1 initcall nf_nat_irc_init+0x0/0x1f returned 0 after XX usecs calling nf_nat_sip_init+0x0/0xa9 @ 1 initcall nf_nat_sip_init+0x0/0xa9 returned 0 after XX usecs calling ip_tables_init+0x0/0xaa @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xaa returned 0 after XX usecs calling iptable_filter_init+0x0/0x6f @ 1 initcall iptable_filter_init+0x0/0x6f returned 0 after XX usecs calling iptable_mangle_init+0x0/0x51 @ 1 initcall iptable_mangle_init+0x0/0x51 returned 0 after XX usecs calling nf_nat_standalone_init+0x0/0x59 @ 1 initcall nf_nat_standalone_init+0x0/0x59 returned 0 after XX usecs calling ecn_mt_init+0x0/0x12 @ 1 initcall ecn_mt_init+0x0/0x12 returned 0 after XX usecs calling ecn_tg_init+0x0/0x12 @ 1 initcall ecn_tg_init+0x0/0x12 returned 0 after XX usecs calling log_tg_init+0x0/0x29 @ 1 initcall log_tg_init+0x0/0x29 returned 0 after XX usecs calling masquerade_tg_init+0x0/0x39 @ 1 initcall masquerade_tg_init+0x0/0x39 returned 0 after XX usecs calling netmap_tg_init+0x0/0x12 @ 1 initcall netmap_tg_init+0x0/0x12 returned 0 after XX usecs calling redirect_tg_init+0x0/0x12 @ 1 initcall redirect_tg_init+0x0/0x12 returned 0 after XX usecs calling reject_tg_init+0x0/0x12 @ 1 initcall reject_tg_init+0x0/0x12 returned 0 after XX usecs calling ip_queue_init+0x0/0x13a @ 1 initcall ip_queue_init+0x0/0x13a returned 0 after XX usecs calling inet_diag_init+0x0/0x72 @ 1 initcall inet_diag_init+0x0/0x72 returned 0 after XX usecs calling tcp_diag_init+0x0/0x12 @ 1 initcall tcp_diag_init+0x0/0x12 returned 0 after XX usecs calling bictcp_register+0x0/0x12 @ 1 TCP bic registered initcall bictcp_register+0x0/0x12 returned 0 after XX usecs calling cubictcp_register+0x0/0x6c @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x6c returned 0 after XX usecs calling tcp_westwood_register+0x0/0x12 @ 1 TCP westwood registered initcall tcp_westwood_register+0x0/0x12 returned 0 after XX usecs calling hybla_register+0x0/0x12 @ 1 TCP hybla registered initcall hybla_register+0x0/0x12 returned 0 after XX usecs calling tcp_vegas_register+0x0/0x14 @ 1 TCP vegas registered initcall tcp_vegas_register+0x0/0x14 returned 0 after XX usecs calling inet6_init+0x0/0x2ba @ 1 NET: Registered protocol family 10 initcall inet6_init+0x0/0x2ba returned 0 after XX usecs calling tunnel6_init+0x0/0x66 @ 1 initcall tunnel6_init+0x0/0x66 returned 0 after XX usecs calling ip6_tables_init+0x0/0xaa @ 1 ip6_tables: (C) 2000-2006 Netfilter Core Team initcall ip6_tables_init+0x0/0xaa returned 0 after XX usecs calling ip6table_filter_init+0x0/0x6f @ 1 initcall ip6table_filter_init+0x0/0x6f returned 0 after XX usecs calling ip6table_mangle_init+0x0/0x51 @ 1 initcall ip6table_mangle_init+0x0/0x51 returned 0 after XX usecs calling nf_conntrack_l3proto_ipv6_init+0x0/0xfc @ 1 initcall nf_conntrack_l3proto_ipv6_init+0x0/0xfc returned 0 after XX usecs calling nf_defrag_init+0x0/0x54 @ 1 initcall nf_defrag_init+0x0/0x54 returned 0 after XX usecs calling log_tg6_init+0x0/0x29 @ 1 initcall log_tg6_init+0x0/0x29 returned 0 after XX usecs calling reject_tg6_init+0x0/0x12 @ 1 initcall reject_tg6_init+0x0/0x12 returned 0 after XX usecs calling sit_init+0x0/0x60 @ 1 IPv6 over IPv4 tunneling driver initcall sit_init+0x0/0x60 returned 0 after XX usecs calling ip6_tunnel_init+0x0/0x8e @ 1 initcall ip6_tunnel_init+0x0/0x8e returned 0 after XX usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after XX usecs calling br_init+0x0/0xa2 @ 1 initcall br_init+0x0/0xa2 returned 0 after XX usecs calling init_rpcsec_gss+0x0/0x4d @ 1 initcall init_rpcsec_gss+0x0/0x4d returned 0 after XX usecs calling vlan_proto_init+0x0/0x82 @ 1 802.1Q VLAN Support v1.8 initcall vlan_proto_init+0x0/0x82 returned 0 after XX usecs calling init_dns_resolver+0x0/0x108 @ 1 Registering the dns_resolver key type initcall init_dns_resolver+0x0/0x108 returned 0 after XX usecs calling mcheck_debugfs_init+0x0/0x3b @ 1 initcall mcheck_debugfs_init+0x0/0x3b returned 0 after XX usecs calling severities_debugfs_init+0x0/0x3b @ 1 initcall severities_debugfs_init+0x0/0x3b returned 0 after XX usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 1 after XX usecs initcall hpet_insert_resource+0x0/0x23 returned with error code 1 calling lapic_insert_resource+0x0/0x3f @ 1 initcall lapic_insert_resource+0x0/0x3f returned -1 after XX usecs initcall lapic_insert_resource+0x0/0x3f returned with error code -1 calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after XX usecs calling check_early_ioremap_leak+0x0/0x50 @ 1 initcall check_early_ioremap_leak+0x0/0x50 returned 0 after XX usecs calling pat_memtype_list_init+0x0/0x32 @ 1 initcall pat_memtype_list_init+0x0/0x32 returned 0 after XX usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after XX usecs calling init_oops_id+0x0/0x31 @ 1 initcall init_oops_id+0x0/0x31 returned 0 after XX usecs calling printk_late_init+0x0/0x50 @ 1 initcall printk_late_init+0x0/0x50 returned 0 after XX usecs calling pm_qos_power_init+0x0/0xca @ 1 initcall pm_qos_power_init+0x0/0xca returned 0 after XX usecs calling alarmtimer_init_late+0x0/0x73 @ 1 No RTC device found, ALARM timers will not wake from suspend initcall alarmtimer_init_late+0x0/0x73 returned 0 after XX usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after XX usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after XX usecs calling set_recommended_min_free_kbytes+0x0/0x82 @ 1 initcall set_recommended_min_free_kbytes+0x0/0x82 returned 0 after XX usecs calling random32_reseed+0x0/0xb3 @ 1 initcall random32_reseed+0x0/0xb3 returned 0 after XX usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after XX usecs calling pci_sysfs_init+0x0/0x51 @ 1 initcall pci_sysfs_init+0x0/0x51 returned 0 after XX usecs calling boot_wait_for_devices+0x0/0x30 @ 1 XENBUS: Device with no driver: device/console/0 initcall boot_wait_for_devices+0x0/0x30 returned 0 after XX usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after XX usecs calling scsi_complete_async_scans+0x0/0x11b @ 1 initcall scsi_complete_async_scans+0x0/0x11b returned 0 after XX usecs calling rtc_hctosys+0x0/0x10d @ 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) initcall rtc_hctosys+0x0/0x10d returned -19 after XX usecs calling powernowk8_init+0x0/0x1bf @ 1 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects powernow-k8: Make sure that your BIOS is up to date and Cool''N''Quiet support is enabled in BIOS setup initcall powernowk8_init+0x0/0x1bf returned -19 after XX usecs calling acpi_cpufreq_init+0x0/0xc1 @ 1 initcall acpi_cpufreq_init+0x0/0xc1 returned 0 after XX usecs calling memmap_init+0x0/0x34 @ 1 initcall memmap_init+0x0/0x34 returned 0 after XX usecs calling pci_mmcfg_late_insert_resources+0x0/0x5e @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned 1 after XX usecs initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned with error code 1 calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after XX usecs calling ip_auto_config+0x0/0xd7b @ 1 IP-Config: Complete: device=eth0, addr=192.168.12.1, mask=255.255.255.0, gw=192.168.12.2, host=yumi, domain=, nis-domain=uguu.de, bootserver=127.0.255.255, rootserver=127.0.255.255, rootpathinitcall ip_auto_config+0x0/0xd7b returned 0 after XX usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after XX usecs async_waiting @ 1 async_continuing @ 1 after 0 usec md: Waiting for all devices to be available before autodetect md: If you don''t use raid, use raid=noautodetect async_waiting @ 1 async_continuing @ 1 after 0 usec md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (xvda1): error: couldn''t mount because of unsupported optional features (240) EXT2-fs (xvda1): error: couldn''t mount because of unsupported optional features (240) EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 202:1. -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-14 21:37 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU [workaround included]
Konrad Rzeszutek Wilk wrote:> On Tue, Jun 14, 2011 at 02:10:55AM +0200, Tobias Diedrich wrote: > > Konrad Rzeszutek Wilk wrote: > > > On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote: > > > > Hi, > > > > > > > > another issue I''m seeing with 3.0-rc2 and Xen is that there is an > > > > unexpectedly high amount of kernel reserved memory. > > > > > > > > > > > I suspect that Linux allocates page table entries and corresponding > > > > data structures for the whole 6GB areas of the provided ''physical > > > > RAM map'' even though it has rather big unusable holes in it. > > > > > > Can you run it with ''memblock=debug debug loglevel=8 initcall_debug''? > > > It should tell you where it tries (and for much space) the pagetables. > > Ugh. In the meantime I would suggest you do the combination of: > > Xen hypervisor line: "dom0_mem=max:512M" and on the Linux line: "mem=512M" to > cut down on the extra pagetable creation..That helps a bit on dom0, for a 256MB dom0 it brings free memory up from 142MB |Memory: 145576k/6028224k available (6122k kernel code, 3932612k absent, 1950036k reserved, 4761k data, 576k init) to 173MB |Memory: 177156k/262144k available (6122k kernel code, 452k absent, 84536k reserved, 4761k data, 576k init) To shrink it more maybe the acpi tables would have to be moved... -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Reasonably Related Threads
- Hypervisor hangs on startup
- Hypervisor hangs on startup
- Guestfish errors (Running in VirtualBox)
- Bug#603727: xen-hypervisor-4.0-amd64: i386 Dom0 crashes after doing some I/O on local storage (software Raid1 on SAS-drives with mpt2sas driver)
- [PATCH RFC 0/4] Paravirtual spinlocks