Tobias Diedrich
2011-Jun-13 20:26 UTC
[Xen-users] 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
So, now that the apic issue is out of the way I tried again with cpufreq compiled in (which I had disabled because of this issue). This unfortunately is not fixed by enabling SMP, but it''s more a minor issue. :) This time with a log captured over netconsole: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #45 SMP Mon Jun 13 22:15:06 CEST 2011 [ 0.000000] Command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 ro [ 0.000000] released 0 pages of unused memory [ 0.000000] Set 524657 page(s) to 1-1 mapping. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) [ 0.000000] Xen: 0000000010000000 - 000000007fef0000 (unusable) [ 0.000000] Xen: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] Xen: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000016fef0000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ f0000000 old size 32 MB [ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) [ 0.000000] last_pfn = 0x16fef0 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000016fef0000 [ 0.000000] ACPI: RSDP 00000000000f8dc0 00014 (v00 VIAK8T) [ 0.000000] ACPI: RSDT 000000007fef3040 00030 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fef30c0 00074 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fef3180 04F07 (v01 VIAK8T AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007fef0000 00040 [ 0.000000] ACPI: SRAT 000000007fef8300 00090 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: APIC 000000007fef8100 00068 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0016fef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00010000 [ 0.000000] 0: 0x00100000 -> 0x0016fef0 [ 0.000000] Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7ed00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.0 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88000ff22000 s79488 r8192 d22912 u110592 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503296 [ 0.000000] Kernel command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff880009200000 - ffff88000d200000 [ 0.000000] software IO TLB at phys 0x9200000 - 0xd200000 [ 0.000000] Memory: 146536k/6028224k available (6122k kernel code, 3932612k absent, 1949076k reserved, 4761k data, 576k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 0.000000] xen: acpi sci 9 [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try ''cgroup_disable=memory'' option if you don''t want memory cgroups [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2199.838 MHz processor. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.67 BogoMIPS (lpj=21998380) [ 0.010000] pid_max: default: 32768 minimum: 301 [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] Initializing cgroup subsys blkio [ 0.010000] SMP alternatives: switching to UP code [ 0.010031] Freeing SMP alternatives: 28k freed [ 0.010161] ACPI: Core revision 20110413 [ 0.018813] Performance Events: Broken PMU hardware detected, using software events only. [ 0.019322] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.019462] Brought up 1 CPUs [ 0.019714] devtmpfs: initialized [ 0.020216] xor: automatically using best checksumming function: generic_sse [ 0.070003] generic_sse: 2833.600 MB/sec [ 0.070113] xor: using function: generic_sse (2833.600 MB/sec) [ 0.070244] Grant table initialized [ 0.070409] NET: Registered protocol family 16 [ 0.071046] TOM: 0000000080000000 aka 2048M [ 0.071198] ACPI: bus type pci registered [ 0.071451] PCI: Using configuration type 1 for base access [ 0.082700] bio: create slab <bio-0> at 0 [ 0.250019] raid6: int64x1 2053 MB/s [ 0.420004] raid6: int64x2 2409 MB/s [ 0.590040] raid6: int64x4 1711 MB/s [ 0.760040] raid6: int64x8 1239 MB/s [ 0.930027] raid6: sse2x1 2500 MB/s [ 1.100014] raid6: sse2x2 3153 MB/s [ 1.270014] raid6: sse2x4 3623 MB/s [ 1.270124] raid6: using algorithm sse2x4 (3623 MB/s) [ 1.284061] ACPI: Interpreter enabled [ 1.284178] ACPI: (supports S0 S5) [ 1.284362] ACPI: Using IOAPIC for interrupt routing [ 1.294860] ACPI: No dock devices found. [ 1.294976] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 1.295289] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.297946] HPET not enabled in BIOS. You might try hpet=force boot option [ 1.298667] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.299438] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 1.355974] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 1.356511] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 1.357050] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12) [ 1.357556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.358183] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.358806] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.359426] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.360000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.360168] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 1.360535] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 1.360902] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. [ 1.361348] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. [ 1.361701] xen/balloon: Initialising balloon driver. [ 1.361815] last_pfn = 0x16fef0 max_arch_pfn = 0x400000000 [ 1.375853] xen-balloon: Initialising balloon driver. [ 1.376243] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.376438] vgaarb: loaded [ 1.376547] vgaarb: bridge control possible 0000:01:00.0 [ 1.376917] SCSI subsystem initialized [ 1.377336] usbcore: registered new interface driver usbfs [ 1.377552] usbcore: registered new interface driver hub [ 1.377739] usbcore: registered new device driver usb [ 1.378202] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.378318] PCI: Using ACPI for IRQ routing [ 1.378906] Switching to clocksource xen [ 1.379026] Switched to NOHz mode on CPU #0 [ 1.379026] pnp: PnP ACPI init [ 1.379026] ACPI: bus type pnp registered [ 1.379026] system 00:00: [mem 0x000d1c00-0x000d3fff] could not be reserved [ 1.379026] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved [ 1.379026] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved [ 1.379026] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 1.379026] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved [ 1.379026] system 00:00: [mem 0x7fef0000-0x7fefffff] could not be reserved [ 1.379026] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 1.379026] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.379026] system 00:00: [mem 0x00100000-0x7feeffff] could not be reserved [ 1.379026] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.379026] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.379026] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved [ 1.379026] system 00:02: [io 0x4000-0x407f] has been reserved [ 1.379026] system 00:02: [io 0x5000-0x500f] has been reserved [ 1.380038] system 00:03: [io 0x0b78-0x0b7b] has been reserved [ 1.380156] system 00:03: [io 0x0f78-0x0f7b] has been reserved [ 1.380269] system 00:03: [io 0x0a78-0x0a7b] has been reserved [ 1.380382] system 00:03: [io 0x0e78-0x0e7b] has been reserved [ 1.380496] system 00:03: [io 0x0bbc-0x0bbf] has been reserved [ 1.380609] system 00:03: [io 0x0fbc-0x0fbf] has been reserved [ 1.380722] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.380835] system 00:03: [io 0x0290-0x0297] has been reserved [ 1.381120] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 1.381468] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 1.381909] xen_map_pirq_gsi: returning irq 6 for gsi 6 [ 1.382464] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 1.383069] xen_map_pirq_gsi: returning irq 3 for gsi 3 [ 1.383912] xen_map_pirq_gsi: returning irq 7 for gsi 7 [ 1.384334] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 1.384592] pnp: PnP ACPI: found 13 devices [ 1.384703] ACPI: ACPI bus type pnp unregistered [ 1.393514] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 1.393686] pci 0000:00:09.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref] [ 1.396029] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] [ 1.396220] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.396334] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.396454] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 1.396572] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref] [ 1.396862] NET: Registered protocol family 2 [ 1.397033] IP route cache hash table entries: 16384 (order: 5, 131072 bytes) [ 1.397351] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.398133] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.398890] TCP: Hash tables configured (established 65536 bind 65536) [ 1.399008] TCP reno registered [ 1.399121] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.399254] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.399525] NET: Registered protocol family 1 [ 1.399791] RPC: Registered named UNIX socket transport module. [ 1.399905] RPC: Registered udp transport module. [ 1.400017] RPC: Registered tcp transport module. [ 1.400067] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.400067] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 1.400719] has_svm: svm not available [ 1.400830] kvm: no hardware support [ 1.402788] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.403290] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.403562] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.403939] NTFS driver 2.1.30 [Flags: R/W]. [ 1.404186] fuse init (API version 7.16) [ 1.404393] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 1.404815] msgmni has been set to 286 [ 1.405289] io scheduler noop registered [ 1.405400] io scheduler deadline registered [ 1.405524] io scheduler cfq registered (default) [ 1.406116] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.406311] ACPI: Power Button [PWRB] [ 1.406547] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.406740] ACPI: Power Button [PWRF] [ 1.411052] Event-channel device installed. [ 1.411871] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 1.420064] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.442938] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.454332] serial 00:0a: disabled [ 1.456209] loop: module loaded [ 1.457802] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 1.457940] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.458186] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.458894] scsi0 : sata_via [ 1.459185] scsi1 : sata_via [ 1.459428] ata1: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe600 irq 20 [ 1.459545] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe500 bmdma 0xe608 irq 20 [ 1.459996] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.460137] Already setup the GSI :20 [ 1.460249] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.461236] scsi2 : pata_via [ 1.461501] scsi3 : pata_via [ 1.464380] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14 [ 1.464496] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15 [ 1.464870] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.464985] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.465164] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 1.465278] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.465453] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.465566] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.465744] PPP generic driver version 2.4.2 [ 1.466000] PPP Deflate Compression module registered [ 1.466114] PPP BSD Compression module registered [ 1.466225] NET: Registered protocol family 24 [ 1.467187] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.467306] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.467570] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.467717] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.468308] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xffffc9000001a000, 00:e0:4c:4c:17:fb, IRQ 17 [ 1.468566] tun: Universal TUN/TAP device driver, 1.6 [ 1.468680] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.468990] usbcore: registered new interface driver cdc_ether [ 1.469157] usbcore: registered new interface driver cdc_subset [ 1.469322] usbcore: registered new interface driver zaurus [ 1.469439] cdc_ncm: 01-June-2011 [ 1.469601] usbcore: registered new interface driver cdc_ncm [ 1.469889] netconsole: local port 25360 [ 1.470002] netconsole: local IP 85.10.200.103 [ 1.470114] netconsole: interface ''eth0'' [ 1.470128] netconsole: remote port 514 [ 1.470128] netconsole: remote IP 217.160.215.119 [ 1.470128] netconsole: remote ethernet address 00:26:88:75:cf:27 [ 1.470128] netconsole: device eth0 not up yet, forcing it [ 1.470128] 8139too 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1.470128] netconsole: carrier detect appears untrustworthy, waiting 4 seconds [ 1.660068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.840465] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 1.840580] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.860456] ata1.00: configured for UDMA/133 [ 1.860732] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 1.861261] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.861550] sd 0:0:0:0: [sda] Write Protect is off [ 1.861705] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 1.862486] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.876495] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.877369] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.070081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.250471] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 2.250585] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.270462] ata2.00: configured for UDMA/133 [ 2.270708] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 2.271235] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.271526] sd 1:0:0:0: [sdb] Write Protect is off [ 2.271682] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 2.272404] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.285931] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [ 2.286714] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.478750] console [netcon0] enabled [ 5.478921] netconsole: network logging started [ 5.479191] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver [ 5.479587] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 5.479732] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.479963] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 5.480176] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 5.480506] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfc121000 [ 5.500073] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 5.500409] hub 1-0:1.0: USB hub found [ 5.500528] hub 1-0:1.0: 8 ports detected [ 5.500859] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver [ 5.501038] uhci_hcd: USB Universal Host Controller Interface driver [ 5.501200] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.501319] Already setup the GSI :21 [ 5.501433] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.501636] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 5.501846] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 5.502081] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e900 [ 5.502469] hub 2-0:1.0: USB hub found [ 5.502588] hub 2-0:1.0: 2 ports detected [ 5.502864] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.502984] Already setup the GSI :21 [ 5.503099] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.503300] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 5.503493] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 5.503728] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000ea00 [ 5.504115] hub 3-0:1.0: USB hub found [ 5.504233] hub 3-0:1.0: 2 ports detected [ 5.504511] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.504631] Already setup the GSI :21 [ 5.504746] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.504947] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 5.505146] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 5.505380] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000eb00 [ 5.505760] hub 4-0:1.0: USB hub found [ 5.505878] hub 4-0:1.0: 2 ports detected [ 5.506154] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 5.506273] Already setup the GSI :21 [ 5.506388] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.506589] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 5.506796] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 5.507033] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00 [ 5.509598] hub 5-0:1.0: USB hub found [ 5.509717] hub 5-0:1.0: 2 ports detected [ 5.510126] usbcore: registered new interface driver cdc_acm [ 5.510243] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5.510498] usbcore: registered new interface driver usblp [ 5.510741] usbcore: registered new interface driver usbserial [ 5.510916] USB Serial support registered for generic [ 5.511093] usbcore: registered new interface driver usbserial_generic [ 5.511212] usbserial: USB Serial Driver core [ 5.511379] USB Serial support registered for pl2303 [ 5.511563] usbcore: registered new interface driver pl2303 [ 5.511681] pl2303: Prolific PL2303 USB to serial adaptor driver [ 5.511934] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.512052] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.512493] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.512889] mousedev: PS/2 mouse device common for all mice [ 5.513243] rtc_cmos 00:05: RTC can wake from S4 [ 5.513644] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.513828] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 5.514000] i2c /dev entries driver [ 5.514451] md: raid1 personality registered for level 1 [ 5.514569] md: raid6 personality registered for level 6 [ 5.514685] md: raid5 personality registered for level 5 [ 5.514800] md: raid4 personality registered for level 4 [ 5.515055] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 5.515297] cpuidle: using governor ladder [ 5.515412] cpuidle: using governor menu [ 5.517044] usbcore: registered new interface driver usbhid [ 5.517163] usbhid: USB HID core driver [ 5.517460] ALSA device list: [ 5.517574] No soundcards found. [ 5.517947] u32 classifier [ 5.518062] Actions configured [ 5.518179] Netfilter messages via NETLINK v0.30. [ 5.518324] nf_conntrack version 0.5.0 (1145 buckets, 4580 max) [ 5.518511] ctnetlink v0.93: registering with nfnetlink. [ 5.518676] IPv4 over IPv4 tunneling driver [ 5.519092] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.519268] TCP bic registered [ 5.519382] TCP cubic registered [ 5.519494] TCP westwood registered [ 5.519605] TCP hybla registered [ 5.519716] TCP vegas registered [ 5.519935] NET: Registered protocol family 10 [ 5.520519] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.520677] IPv6 over IPv4 tunneling driver [ 5.522111] NET: Registered protocol family 17 [ 5.522280] 802.1Q VLAN Support v1.8 [ 5.522402] Registering the dns_resolver key type [ 5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 20:20:00 UTC (1307996400) [ 5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) [ 5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa [ 5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8 [ 5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8 [ 5.531460] Marking TSC unstable due to cpufreq changes [ 5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0 [ 5.531802] BUG: unable to handle kernel paging request at ffff880807e07b78 [ 5.531982] IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b [ 5.532207] PGD 1a18067 PUD 0 [ 5.532450] Oops: 0002 [#1] SMP [ 5.532623] CPU 0 [ 5.532724] Modules linked in: [ 5.532972] [ 5.533151] Pid: 1, comm: swapper Not tainted 3.0.0-rc2 #45 MICRO-STAR INTERNATIONAL CO., LTD MS-7094/MS-7094 [ 5.533506] RIP: e030:[<ffffffff81479163>] [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b [ 5.533733] RSP: e02b:ffff880008c61a30 EFLAGS: 00010246 [ 5.533849] RAX: ffff880007e07b00 RBX: 00000000ffff8cf9 RCX: 00000000ffffffff [ 5.534034] RDX: ffff880007e07b80 RSI: 0000000000000000 RDI: ffffffff81be934c [ 5.534151] RBP: ffff880008c61a40 R08: 0000000000000003 R09: ffff8800075267c0 [ 5.534268] R10: 0000000000000020 R11: 0000000000000020 R12: 0000000000000000 [ 5.534384] R13: 0000000000000000 R14: 00000000ffffffff R15: 00000000000c3500 [ 5.534572] FS: 0000000000000000(0000) GS:ffff88000ff22000(0000) knlGS:0000000000000000 [ 5.534767] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5.534881] CR2: ffff880807e07b78 CR3: 0000000001a17000 CR4: 0000000000000660 [ 5.534998] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.535183] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5.535301] Process swapper (pid: 1, threadinfo ffff880008c60000, task ffff880008c5e040) [ 5.535493] Stack: [ 5.535602] ffff880007e07b00 00000000ffffffff ffff880008c61a70 ffffffff81479248 [ 5.536051] ffff880008c61b90 0000000000000001 00000000fffffffe 0000000000000000 [ 5.536434] ffff880008c61ab0 ffffffff81095d68 0000000000000001 0000000000000000 [ 5.536814] Call Trace: [ 5.536929] [<ffffffff81479248>] cpufreq_stat_notifier_trans+0x48/0x7c [ 5.537116] [<ffffffff81095d68>] notifier_call_chain+0x32/0x5e [ 5.537235] [<ffffffff81095e6b>] __srcu_notifier_call_chain+0x47/0x63 [ 5.537353] [<ffffffff81095e96>] srcu_notifier_call_chain+0xf/0x11 [ 5.537472] [<ffffffff81477e7a>] cpufreq_notify_transition+0x111/0x134 [ 5.537657] [<ffffffff8147b0d4>] powernowk8_target+0x53b/0x617 [ 5.537776] [<ffffffff8147723a>] __cpufreq_driver_target+0x2e/0x30 [ 5.537894] [<ffffffff8147a127>] cpufreq_governor_dbs+0x339/0x356 [ 5.538012] [<ffffffff81477394>] __cpufreq_governor+0xa8/0xe9 [ 5.538197] [<ffffffff81477525>] __cpufreq_set_policy+0x132/0x13e [ 5.538316] [<ffffffff8147848d>] cpufreq_add_dev_interface+0x272/0x28c [ 5.538435] [<ffffffff81478c70>] ? cpufreq_update_policy+0xdc/0xdc [ 5.538553] [<ffffffff814788d0>] cpufreq_add_dev+0x429/0x439 [ 5.538738] [<ffffffff8136bab4>] sysdev_driver_register+0xcf/0x13e [ 5.538859] [<ffffffff81477b50>] cpufreq_register_driver+0x9a/0x139 [ 5.538979] [<ffffffff815f3dab>] powernowk8_init+0x177/0x1bf [ 5.539096] [<ffffffff815f3c34>] ? powernowk8_cpu_init+0x8d3/0x8d3 [ 5.539282] [<ffffffff81002155>] do_one_initcall+0x7a/0x135 [ 5.539402] [<ffffffff81ab7c52>] kernel_init+0xd8/0x159 [ 5.539519] [<ffffffff815f7f24>] kernel_thread_helper+0x4/0x10 [ 5.539636] [<ffffffff815f73f6>] ? int_ret_from_sys_call+0x7/0x1b [ 5.539821] [<ffffffff815f6b61>] ? retint_restore_args+0x5/0x6 [ 5.539939] [<ffffffff815f7f20>] ? gs_change+0x13/0x13 [ 5.540053] Code: e8 91 d5 17 00 4a 8b 14 e5 d0 4e a9 81 48 c7 c0 50 fd 00 00 48 8b 04 10 48 8b 50 20 48 85 d2 74 0e 8b 48 18 48 89 de 48 2b 70 08 [ 5.541794] 01 34 ca 48 89 58 08 fe 05 db 01 77 00 5b 31 c0 41 5c c9 c3 [ 5.541794] RIP [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b [ 5.541794] RSP <ffff880008c61a30> [ 5.541794] CR2: ffff880807e07b78 [ 5.541794] ---[ end trace de01f9779831d8cd ]--- [ 5.544114] Kernel panic - not syncing: Attempted to kill init! [ 5.544234] Pid: 1, comm: swapper Tainted: G D 3.0.0-rc2 #45 [ 5.544350] Call Trace: [ 5.544464] [<ffffffff815f3f69>] panic+0x8c/0x198 [ 5.544650] [<ffffffff81035cb2>] ? check_events+0x12/0x20 [ 5.544769] [<ffffffff8107a59e>] do_exit+0xab/0x6bc [ 5.544886] [<ffffffff81078ad0>] ? kmsg_dump+0x46/0xd2 [ 5.545003] [<ffffffff8103b2db>] oops_end+0x8f/0x94 [ 5.545190] [<ffffffff8105a23e>] no_context+0x1f4/0x203 [ 5.545308] [<ffffffff8105a3d5>] __bad_area_nosemaphore+0x188/0x1ab [ 5.545428] [<ffffffff8105a406>] bad_area_nosemaphore+0xe/0x10 [ 5.545547] [<ffffffff8105a7d9>] do_page_fault+0x1a5/0x3b8 [ 5.545732] [<ffffffff814000a6>] ? de4x5_init_connection+0x15f/0x176 [ 5.545853] [<ffffffff814000a6>] ? de4x5_init_connection+0x15f/0x176 [ 5.545972] [<ffffffff81035c9f>] ? xen_restore_fl_direct_reloc+0x4/0x4 [ 5.546091] [<ffffffff815f674a>] ? _raw_spin_unlock_irqrestore+0x13/0x15 [ 5.546278] [<ffffffff81405287>] ? write_msg+0xe1/0xf0 [ 5.546397] [<ffffffff81035701>] ? xen_force_evtchn_callback+0xd/0xf [ 5.546516] [<ffffffff81054ea6>] ? pvclock_clocksource_read+0x48/0xb1 [ 5.546635] [<ffffffff81054ea6>] ? pvclock_clocksource_read+0x48/0xb1 [ 5.546825] [<ffffffff815f6dd5>] page_fault+0x25/0x30 [ 5.546943] [<ffffffff81479163>] ? cpufreq_stats_update+0x46/0x5b [ 5.547062] [<ffffffff81479248>] cpufreq_stat_notifier_trans+0x48/0x7c [ 5.547181] [<ffffffff81095d68>] notifier_call_chain+0x32/0x5e [ 5.547366] [<ffffffff81095e6b>] __srcu_notifier_call_chain+0x47/0x63 [ 5.547487] [<ffffffff81095e96>] srcu_notifier_call_chain+0xf/0x11 [ 5.547607] [<ffffffff81477e7a>] cpufreq_notify_transition+0x111/0x134 [ 5.547725] [<ffffffff8147b0d4>] powernowk8_target+0x53b/0x617 [ 5.547912] [<ffffffff8147723a>] __cpufreq_driver_target+0x2e/0x30 [ 5.548032] [<ffffffff8147a127>] cpufreq_governor_dbs+0x339/0x356 [ 5.548151] [<ffffffff81477394>] __cpufreq_governor+0xa8/0xe9 [ 5.548269] [<ffffffff81477525>] __cpufreq_set_policy+0x132/0x13e [ 5.548455] [<ffffffff8147848d>] cpufreq_add_dev_interface+0x272/0x28c [ 5.548575] [<ffffffff81478c70>] ? cpufreq_update_policy+0xdc/0xdc [ 5.548694] [<ffffffff814788d0>] cpufreq_add_dev+0x429/0x439 [ 5.548811] [<ffffffff8136bab4>] sysdev_driver_register+0xcf/0x13e [ 5.548998] [<ffffffff81477b50>] cpufreq_register_driver+0x9a/0x139 [ 5.549117] [<ffffffff815f3dab>] powernowk8_init+0x177/0x1bf [ 5.549235] [<ffffffff815f3c34>] ? powernowk8_cpu_init+0x8d3/0x8d3 [ 5.549354] [<ffffffff81002155>] do_one_initcall+0x7a/0x135 [ 5.549539] [<ffffffff81ab7c52>] kernel_init+0xd8/0x159 [ 5.549657] [<ffffffff815f7f24>] kernel_thread_helper+0x4/0x10 [ 5.549776] [<ffffffff815f73f6>] ? int_ret_from_sys_call+0x7/0x1b [ 5.549895] [<ffffffff815f6b61>] ? retint_restore_args+0x5/0x6 [ 5.550081] [<ffffffff815f7f20>] ? gs_change+0x13/0x13 Kernel .config: # # Automatically generated make config: don''t edit # Linux/x86_64 3.0.0-rc2 Kernel Configuration # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_INTEL_TXT=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" # CONFIG_KTIME_SCALAR is not set CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_FHANDLE is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_FORCED_THREADING=y # CONFIG_SPARSE_IRQ is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y # CONFIG_CGROUP_PERF is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_SCHED_AUTOGROUP=y CONFIG_MM_OWNER=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EXPERT is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set # CONFIG_JUMP_LABEL is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_ARCH_JUMP_LABEL=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CFQ_GROUP_IOSCHED=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_INLINE_SPIN_UNLOCK=y # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y # CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y # CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y # CONFIG_X86_MPPARSE is not set # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=128 CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set # CONFIG_XEN_DEBUG is not set CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y CONFIG_CMPXCHG_LOCAL=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_AMD_IOMMU=y # CONFIG_AMD_IOMMU_STATS is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y CONFIG_IOMMU_API=y # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y # CONFIG_MEMORY_FAILURE is not set CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CLEANCACHE=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y # CONFIG_MTRR_SANITIZER is not set CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y # CONFIG_EFI is not set # CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR=y CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # # CONFIG_SUSPEND is not set CONFIG_HIBERNATE_CALLBACKS=y # CONFIG_HIBERNATION is not set CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_RUNTIME=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_ACPI=y CONFIG_ACPI_PROCFS=y # CONFIG_ACPI_PROCFS_POWER is not set # CONFIG_ACPI_EC_DEBUGFS is not set # CONFIG_ACPI_PROC_EVENT is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set CONFIG_ACPI_THERMAL=y CONFIG_ACPI_CUSTOM_DSDT_FILE="" # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_PCI_SLOT=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_ACPI_HED is not set # CONFIG_ACPI_CUSTOM_METHOD is not set # CONFIG_ACPI_APEI is not set # CONFIG_SFI is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # x86 CPU frequency scaling drivers # # CONFIG_X86_PCC_CPUFREQ is not set CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_INTEL_IDLE is not set # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_XEN=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_DMAR=y CONFIG_DMAR_DEFAULT_ON=y CONFIG_DMAR_FLOPPY_WA=y # CONFIG_INTR_REMAP is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set # CONFIG_PCIEAER_INJECT is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIE_PME=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_XEN_PCIDEV_FRONTEND=y CONFIG_HT_IRQ=y CONFIG_PCI_IOV=y CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_RAPIDIO is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_KEYS_COMPAT=y CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_IP_FIB_TRIE_STATS is not set CONFIG_IP_MULTIPLE_TABLES=y # CONFIG_IP_ROUTE_MULTIPATH is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_ROUTE_CLASSID=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=y # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_IP_MROUTE=y # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=y # CONFIG_TCP_CONG_HTCP is not set # CONFIG_TCP_CONG_HSTCP is not set CONFIG_TCP_CONG_HYBLA=y CONFIG_TCP_CONG_VEGAS=y # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HYBLA is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set CONFIG_INET6_TUNNEL=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y # CONFIG_IPV6_MULTIPLE_TABLES is not set CONFIG_IPV6_MROUTE=y # CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set CONFIG_IPV6_PIMSM_V2=y # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # CONFIG_BRIDGE_NETFILTER is not set # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_MARK=y # CONFIG_NF_CONNTRACK_EVENTS is not set # CONFIG_NF_CONNTRACK_TIMESTAMP is not set # CONFIG_NF_CT_PROTO_DCCP is not set # CONFIG_NF_CT_PROTO_SCTP is not set # CONFIG_NF_CT_PROTO_UDPLITE is not set # CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=y CONFIG_NF_CONNTRACK_H323=y CONFIG_NF_CONNTRACK_IRC=y # CONFIG_NF_CONNTRACK_NETBIOS_NS is not set # CONFIG_NF_CONNTRACK_SNMP is not set # CONFIG_NF_CONNTRACK_PPTP is not set # CONFIG_NF_CONNTRACK_SANE is not set CONFIG_NF_CONNTRACK_SIP=y # CONFIG_NF_CONNTRACK_TFTP is not set CONFIG_NF_CT_NETLINK=y # CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=y # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=y CONFIG_NETFILTER_XT_CONNMARK=y # # Xtables targets # # CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y CONFIG_NETFILTER_XT_TARGET_CONNMARK=y CONFIG_NETFILTER_XT_TARGET_DSCP=y CONFIG_NETFILTER_XT_TARGET_HL=y # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TEE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=y # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # # Xtables matches # # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=y CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y CONFIG_NETFILTER_XT_MATCH_CONNMARK=y CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y # CONFIG_NETFILTER_XT_MATCH_CPU is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set CONFIG_NETFILTER_XT_MATCH_DSCP=y # CONFIG_NETFILTER_XT_MATCH_ESP is not set CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y CONFIG_NETFILTER_XT_MATCH_HELPER=y CONFIG_NETFILTER_XT_MATCH_HL=y # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=y CONFIG_NETFILTER_XT_MATCH_LIMIT=y CONFIG_NETFILTER_XT_MATCH_MAC=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y CONFIG_NETFILTER_XT_MATCH_OSF=y CONFIG_NETFILTER_XT_MATCH_OWNER=y CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y CONFIG_NETFILTER_XT_MATCH_QUOTA=y # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set CONFIG_NETFILTER_XT_MATCH_REALM=y CONFIG_NETFILTER_XT_MATCH_RECENT=y # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NETFILTER_XT_MATCH_STATISTIC=y CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_TCPMSS=y # CONFIG_NETFILTER_XT_MATCH_TIME is not set CONFIG_NETFILTER_XT_MATCH_U32=y # CONFIG_IP_SET is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=y CONFIG_NF_CONNTRACK_IPV4=y CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y # CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y # CONFIG_IP_NF_TARGET_ULOG is not set CONFIG_NF_NAT=y CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_NF_NAT_FTP=y CONFIG_NF_NAT_IRC=y # CONFIG_NF_NAT_TFTP is not set # CONFIG_NF_NAT_AMANDA is not set # CONFIG_NF_NAT_PPTP is not set CONFIG_NF_NAT_H323=y CONFIG_NF_NAT_SIP=y CONFIG_IP_NF_MANGLE=y # CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_TTL=y # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # # IPv6: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV6=y CONFIG_NF_CONNTRACK_IPV6=y # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=y # CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set # CONFIG_IP6_NF_MATCH_FRAG is not set # CONFIG_IP6_NF_MATCH_OPTS is not set # CONFIG_IP6_NF_MATCH_HL is not set # CONFIG_IP6_NF_MATCH_IPV6HEADER is not set # CONFIG_IP6_NF_MATCH_MH is not set # CONFIG_IP6_NF_MATCH_RT is not set CONFIG_IP6_NF_TARGET_HL=y CONFIG_IP6_NF_TARGET_LOG=y CONFIG_IP6_NF_FILTER=y CONFIG_IP6_NF_TARGET_REJECT=y CONFIG_IP6_NF_MANGLE=y # CONFIG_IP6_NF_RAW is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set CONFIG_STP=y CONFIG_BRIDGE=y CONFIG_BRIDGE_IGMP_SNOOPING=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=y # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y # CONFIG_NET_SCH_HFSC is not set CONFIG_NET_SCH_PRIO=y # CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFB=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y # CONFIG_NET_SCH_NETEM is not set # CONFIG_NET_SCH_DRR is not set CONFIG_NET_SCH_MQPRIO=y CONFIG_NET_SCH_CHOKE=y # CONFIG_NET_SCH_QFQ is not set CONFIG_NET_SCH_INGRESS=y # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y CONFIG_NET_CLS_TCINDEX=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y # CONFIG_CLS_U32_PERF is not set CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=y CONFIG_NET_CLS_RSVP6=y # CONFIG_NET_CLS_FLOW is not set CONFIG_NET_CLS_CGROUP=y # CONFIG_NET_EMATCH is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y # CONFIG_NET_ACT_GACT is not set # CONFIG_NET_ACT_MIRRED is not set # CONFIG_NET_ACT_IPT is not set # CONFIG_NET_ACT_NAT is not set # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set # CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_ACT_CSUM is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_HAVE_BPF_JIT=y # CONFIG_BPF_JIT is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set CONFIG_SYS_HYPERVISOR=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # # DRBD disabled because PROC_FS, INET or CONNECTOR not selected # # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_XEN_BLKDEV_BACKEND=y # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y CONFIG_SATA_MV=y CONFIG_SATA_NV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set CONFIG_PATA_AMD=y # CONFIG_PATA_ARASAN_CF is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set CONFIG_PATA_PDC2027X=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set CONFIG_PATA_SIL680=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y # CONFIG_MULTICORE_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y # CONFIG_DM_RAID is not set # CONFIG_DM_LOG_USERSPACE is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_DM_FLAKEY is not set # CONFIG_TARGET_CORE is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_IFB=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_MII=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ETHOC is not set # CONFIG_DNET is not set CONFIG_NET_TULIP=y CONFIG_DE2104X=y CONFIG_DE2104X_DSL=0 CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=y # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set CONFIG_8139CP=y CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y CONFIG_E1000E=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_STMMAC_ETH is not set # CONFIG_PCH_GBE is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y # CONFIG_AIRO is not set # CONFIG_ATMEL is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_CDC_EEM is not set CONFIG_USB_NET_CDC_NCM=y # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC75XX is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set # CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set CONFIG_USB_NET_CDC_SUBSET=y # CONFIG_USB_ALI_M5632 is not set # CONFIG_USB_AN2720 is not set # CONFIG_USB_BELKIN is not set CONFIG_USB_ARMLINUX=y # CONFIG_USB_EPSON2888 is not set # CONFIG_USB_KC2190 is not set CONFIG_USB_NET_ZAURUS=y # CONFIG_USB_NET_CX82310_ETH is not set # CONFIG_USB_NET_INT51X1 is not set # CONFIG_USB_IPHETH is not set # CONFIG_USB_SIERRA_NET is not set # CONFIG_USB_VL600 is not set # CONFIG_WAN is not set # # CAIF transport drivers # CONFIG_XEN_NETDEV_FRONTEND=y CONFIG_XEN_NETDEV_BACKEND=y # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=y # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=y CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_PCH_UART is not set # CONFIG_SERIAL_XILINX_PS_UART is not set CONFIG_HVC_DRIVER=y CONFIG_HVC_IRQ=y CONFIG_HVC_XEN=y # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y CONFIG_HPET_MMAP=y # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_RAMOOPS is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set CONFIG_I2C_PIIX4=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # ACPI drivers # # CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # CONFIG_I2C_EG20T is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set # # PPS generators support # # # PTP clock support # # # Enable Device Drivers -> PPS to see the PTP clock options. # CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ20Z75 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_MAX8903 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set CONFIG_SENSORS_K8TEMP=y # CONFIG_SENSORS_K10TEMP is not set # CONFIG_SENSORS_FAM15H_POWER is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set CONFIG_SENSORS_IT87=y # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH5627 is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set CONFIG_SENSORS_VT8231=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_APPLESMC is not set # # ACPI drivers # # CONFIG_SENSORS_ACPI_POWER is not set # CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set CONFIG_MFD_SUPPORT=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS6105X is not set # CONFIG_TPS6507X is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_CS5535 is not set # CONFIG_LPC_SCH is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=m # # Multimedia core support # # CONFIG_MEDIA_CONTROLLER is not set CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_COMMON=m # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # # CONFIG_RC_CORE is not set # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m # CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # # Audio decoders, processors and mixers # # # RDS decoders # # # Video decoders # # # Video and audio decoders # # # MPEG video encoders # # # Video encoders # # # Camera sensor devices # # # Video improvement chips # # # Miscelaneous helper chips # # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_VIDEO_SR030PC30 is not set # CONFIG_VIDEO_NOON010PC30 is not set # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m # CONFIG_USB_M5602 is not set # CONFIG_USB_STV06XX is not set # CONFIG_USB_GL860 is not set # CONFIG_USB_GSPCA_BENQ is not set # CONFIG_USB_GSPCA_CONEX is not set # CONFIG_USB_GSPCA_CPIA1 is not set # CONFIG_USB_GSPCA_ETOMS is not set # CONFIG_USB_GSPCA_FINEPIX is not set # CONFIG_USB_GSPCA_JEILINJ is not set # CONFIG_USB_GSPCA_KINECT is not set # CONFIG_USB_GSPCA_KONICA is not set # CONFIG_USB_GSPCA_MARS is not set # CONFIG_USB_GSPCA_MR97310A is not set # CONFIG_USB_GSPCA_NW80X is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_OV534_9 is not set # CONFIG_USB_GSPCA_PAC207 is not set # CONFIG_USB_GSPCA_PAC7302 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SN9C2028 is not set # CONFIG_USB_GSPCA_SN9C20X is not set # CONFIG_USB_GSPCA_SONIXB is not set # CONFIG_USB_GSPCA_SONIXJ is not set # CONFIG_USB_GSPCA_SPCA500 is not set # CONFIG_USB_GSPCA_SPCA501 is not set # CONFIG_USB_GSPCA_SPCA505 is not set # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set # CONFIG_USB_GSPCA_SPCA561 is not set # CONFIG_USB_GSPCA_SPCA1528 is not set # CONFIG_USB_GSPCA_SQ905 is not set # CONFIG_USB_GSPCA_SQ905C is not set # CONFIG_USB_GSPCA_SQ930X is not set # CONFIG_USB_GSPCA_STK014 is not set # CONFIG_USB_GSPCA_STV0680 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set # CONFIG_USB_GSPCA_T613 is not set # CONFIG_USB_GSPCA_TV8532 is not set # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_VICAM is not set # CONFIG_USB_GSPCA_XIRLINK_CIT is not set # CONFIG_USB_GSPCA_ZC3XX is not set # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_HDPVR is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_ET61X251 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set # CONFIG_V4L_MEM2MEM_DRIVERS is not set # CONFIG_RADIO_ADAPTERS is not set # # Graphics support # # CONFIG_AGP is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=2 # CONFIG_VGA_SWITCHEROO is not set # CONFIG_DRM is not set # CONFIG_STUB_POULSBO is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_HRTIMER is not set CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_DMA_SGBUF=y # CONFIG_SND_RAWMIDI_SEQ is not set # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ASIHPI is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=y CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y # CONFIG_SND_HDA_INPUT_BEEP is not set CONFIG_SND_HDA_INPUT_JACK=y CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_HDA_POWER_SAVE is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LOLA is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_UA101=m CONFIG_SND_USB_USX2Y=m # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_USB_US122L=m # CONFIG_SND_USB_6FIRE is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # Special HID drivers # CONFIG_HID_A4TECH=y # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y # CONFIG_HID_PRODIKEYS is not set CONFIG_HID_CYPRESS=y CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EMS_FF is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KEYTOUCH is not set CONFIG_HID_KYE=y # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y # CONFIG_HID_LCPOWER is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWII_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y # CONFIG_HID_MULTITOUCH is not set CONFIG_HID_NTRIG=y CONFIG_HID_ORTEK=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y # CONFIG_HID_PICOLCD is not set # CONFIG_HID_QUANTA is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_ROCCAT_ARVO is not set # CONFIG_HID_ROCCAT_KONE is not set # CONFIG_HID_ROCCAT_KONEPLUS is not set # CONFIG_HID_ROCCAT_KOVAPLUS is not set # CONFIG_HID_ROCCAT_PYRA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set CONFIG_HID_SMARTJOYPLUS=y # CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y # CONFIG_THRUSTMASTER_FF is not set CONFIG_HID_ZEROPLUS=y # CONFIG_ZEROPLUS_FF is not set # CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set CONFIG_USB_MON=y # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=y CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # CONFIG_USB_UAS is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set # CONFIG_USB_SERIAL_ZIO is not set # CONFIG_USB_SERIAL_SSU100 is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_NFC_DEVICES is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # Xen driver support # CONFIG_XEN_BALLOON=y # CONFIG_XEN_SCRUB_PAGES is not set CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_XEN_PLATFORM_PCI=m CONFIG_SWIOTLB_XEN=y CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ET131X is not set # CONFIG_SLICOSS is not set # CONFIG_USBIP_CORE is not set # CONFIG_ECHO is not set # CONFIG_BRCMUTIL is not set # CONFIG_COMEDI is not set # CONFIG_ASUS_OLED is not set # CONFIG_R8187SE is not set # CONFIG_RTL8192U is not set # CONFIG_RTL8192E is not set # CONFIG_R8712U is not set # CONFIG_RTS_PSTOR is not set # CONFIG_TRANZPORT is not set # CONFIG_POHMELFS is not set # CONFIG_IDE_PHISON is not set # CONFIG_LINE6_USB is not set # CONFIG_USB_SERIAL_QUATECH2 is not set # CONFIG_USB_SERIAL_QUATECH_USB2 is not set # CONFIG_VT6655 is not set # CONFIG_VT6656 is not set # CONFIG_HYPERV is not set # CONFIG_VME_BUS is not set # CONFIG_DX_SEP is not set # CONFIG_IIO is not set # CONFIG_XVMALLOC is not set # CONFIG_ZRAM is not set # CONFIG_ZCACHE is not set # CONFIG_VIDEO_DT3155 is not set # CONFIG_CRYSTALHD is not set # CONFIG_EASYCAP is not set # CONFIG_SOLO6X10 is not set # CONFIG_ACPI_QUICKSTART is not set CONFIG_MACH_NO_WESTBRIDGE=y # CONFIG_USB_ENESTORAGE is not set # CONFIG_BCM_WIMAX is not set # CONFIG_FT1000 is not set # # Speakup console speech # # CONFIG_SPEAKUP is not set # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set # # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set # CONFIG_INTEL_MEI is not set # CONFIG_X86_PLATFORM_DEVICES is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_DMI_SYSFS is not set # CONFIG_ISCSI_IBFT_FIND is not set # CONFIG_SIGMA is not set # CONFIG_GOOGLE_FIRMWARE is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_QUOTACTL is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y # CONFIG_CUSE is not set CONFIG_GENERIC_ACL=y # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=932 CONFIG_FAT_DEFAULT_IOCHARSET="euc-jp" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_XATTR is not set # CONFIG_SQUASHFS_LZO is not set # CONFIG_SQUASHFS_XZ is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_V4_1 is not set # CONFIG_ROOT_NFS is not set # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y # CONFIG_NFS_USE_NEW_IDMAPPER is not set CONFIG_NFSD=y CONFIG_NFSD_DEPRECATED=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_LOCKUP_DETECTOR=y CONFIG_HARDLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_LKDTM is not set # CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_EVENT_POWER_TRACING_DEPRECATED=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_MMIOTRACE=y CONFIG_MMIOTRACE_TEST=m # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_TEST_KSTRTOX is not set CONFIG_STRICT_DEVMEM=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_SET_MODULE_RONX=y # CONFIG_DEBUG_NX_TEST is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 # CONFIG_IO_DELAY_0X80 is not set # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set CONFIG_IO_DELAY_NONE=y CONFIG_DEFAULT_IO_DELAY_TYPE=3 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # CONFIG_OPTIMIZE_INLINING is not set # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_INTEL_TXT is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_ASYNC_PQ=y CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set CONFIG_CRYPTO_SEQIV=y # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CRC32C_INTEL is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y # CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set CONFIG_CRYPTO_BLOWFISH=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_X86_64=y # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y # CONFIG_KVM_INTEL is not set CONFIG_KVM_AMD=y # CONFIG_KVM_MMU_AUDIT is not set # CONFIG_VHOST_NET is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_RAID6_PQ=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CPU_RMAP=y CONFIG_NLATTR=y # CONFIG_AVERAGE is not set -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Konrad Rzeszutek Wilk
2011-Jun-13 21:51 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
> [ 5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 20:20:00 UTC (1307996400) > [ 5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) > [ 5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > [ 5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa > [ 5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > [ 5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > [ 5.531460] Marking TSC unstable due to cpufreq changes > [ 5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0 > [ 5.531802] BUG: unable to handle kernel paging request at ffff880807e07b78 > [ 5.531982] IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5bFor this one, you will have to fire out gdb and disassemble the code to figure out where it failed. Look for ''gdb vmlinux'' and ''disassembly'' on this mailing list - that should provide some hints.> [ 5.532207] PGD 1a18067 PUD 0 > [ 5.532450] Oops: 0002 [#1] SMP > [ 5.532623] CPU 0 > [ 5.532724] Modules linked in: > [ 5.532972] > [ 5.533151] Pid: 1, comm: swapper Not tainted 3.0.0-rc2 #45 MICRO-STAR INTERNATIONAL CO., LTD MS-7094/MS-7094 > [ 5.533506] RIP: e030:[<ffffffff81479163>] [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b > [ 5.533733] RSP: e02b:ffff880008c61a30 EFLAGS: 00010246 > [ 5.533849] RAX: ffff880007e07b00 RBX: 00000000ffff8cf9 RCX: 00000000ffffffff > [ 5.534034] RDX: ffff880007e07b80 RSI: 0000000000000000 RDI: ffffffff81be934c > [ 5.534151] RBP: ffff880008c61a40 R08: 0000000000000003 R09: ffff8800075267c0 > [ 5.534268] R10: 0000000000000020 R11: 0000000000000020 R12: 0000000000000000 > [ 5.534384] R13: 0000000000000000 R14: 00000000ffffffff R15: 00000000000c3500 > [ 5.534572] FS: 0000000000000000(0000) GS:ffff88000ff22000(0000) knlGS:0000000000000000 > [ 5.534767] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b > [ 5.534881] CR2: ffff880807e07b78 CR3: 0000000001a17000 CR4: 0000000000000660 > [ 5.534998] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 5.535183] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [ 5.535301] Process swapper (pid: 1, threadinfo ffff880008c60000, task ffff880008c5e040) > [ 5.535493] Stack: > [ 5.535602] ffff880007e07b00 00000000ffffffff ffff880008c61a70 ffffffff81479248 > [ 5.536051] ffff880008c61b90 0000000000000001 00000000fffffffe 0000000000000000 > [ 5.536434] ffff880008c61ab0 ffffffff81095d68 0000000000000001 0000000000000000 > [ 5.536814] Call Trace: > [ 5.536929] [<ffffffff81479248>] cpufreq_stat_notifier_trans+0x48/0x7c > [ 5.537116] [<ffffffff81095d68>] notifier_call_chain+0x32/0x5e > [ 5.537235] [<ffffffff81095e6b>] __srcu_notifier_call_chain+0x47/0x63 > [ 5.537353] [<ffffffff81095e96>] srcu_notifier_call_chain+0xf/0x11 > [ 5.537472] [<ffffffff81477e7a>] cpufreq_notify_transition+0x111/0x134 > [ 5.537657] [<ffffffff8147b0d4>] powernowk8_target+0x53b/0x617 > [ 5.537776] [<ffffffff8147723a>] __cpufreq_driver_target+0x2e/0x30 > [ 5.537894] [<ffffffff8147a127>] cpufreq_governor_dbs+0x339/0x356 > [ 5.538012] [<ffffffff81477394>] __cpufreq_governor+0xa8/0xe9 > [ 5.538197] [<ffffffff81477525>] __cpufreq_set_policy+0x132/0x13e > [ 5.538316] [<ffffffff8147848d>] cpufreq_add_dev_interface+0x272/0x28c > [ 5.538435] [<ffffffff81478c70>] ? cpufreq_update_policy+0xdc/0xdc > [ 5.538553] [<ffffffff814788d0>] cpufreq_add_dev+0x429/0x439 > [ 5.538738] [<ffffffff8136bab4>] sysdev_driver_register+0xcf/0x13e > [ 5.538859] [<ffffffff81477b50>] cpufreq_register_driver+0x9a/0x139 > [ 5.538979] [<ffffffff815f3dab>] powernowk8_init+0x177/0x1bf > [ 5.539096] [<ffffffff815f3c34>] ? powernowk8_cpu_init+0x8d3/0x8d3 > [ 5.539282] [<ffffffff81002155>] do_one_initcall+0x7a/0x135 > [ 5.539402] [<ffffffff81ab7c52>] kernel_init+0xd8/0x159 > [ 5.539519] [<ffffffff815f7f24>] kernel_thread_helper+0x4/0x10 > [ 5.539636] [<ffffffff815f73f6>] ? int_ret_from_sys_call+0x7/0x1b > [ 5.539821] [<ffffffff815f6b61>] ? retint_restore_args+0x5/0x6 > [ 5.539939] [<ffffffff815f7f20>] ? gs_change+0x13/0x13_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-13 23:52 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
Konrad Rzeszutek Wilk wrote:> > [ 5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 20:20:00 UTC (1307996400) > > [ 5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) > > [ 5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > [ 5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > [ 5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > [ 5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > [ 5.531460] Marking TSC unstable due to cpufreq changes > > [ 5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0 > > [ 5.531802] BUG: unable to handle kernel paging request at ffff880807e07b78 > > [ 5.531982] IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b > > For this one, you will have to fire out gdb and disassemble the code to > figure out where it failed. Look for ''gdb vmlinux'' and ''disassembly'' on this > mailing list - that should provide some hints.Probably because of the ''fid trans failed'' stat->last_index is -1 (or 0xffffffff because it''s really an unsigned int): [ 5.721794] powernow-k8: fid trans failed, fid 0xa, curr 0x0 [ 5.721909] cpufreq_stats_update: cpu=0 [ 5.721945] max_state=4 last_index=-1 [ 5.722191] ------------[ cut here ]------------ [ 5.722305] kernel BUG at drivers/cpufreq/cpufreq_stats.c:71! I added the BUG() there: if (stat->last_index > stat->max_state * stat->max_state) BUG(); Index: linux-3.0-rc2-xen/drivers/cpufreq/cpufreq_stats.c ==================================================================--- linux-3.0-rc2-xen.orig/drivers/cpufreq/cpufreq_stats.c 2011-06-14 01:24:10.639010391 +0200 +++ linux-3.0-rc2-xen/drivers/cpufreq/cpufreq_stats.c 2011-06-14 01:32:32.743101791 +0200 @@ -56,9 +56,20 @@ struct cpufreq_stats *stat; unsigned long long cur_time; + printk(KERN_WARNING "cpufreq_stats_update: cpu=%d ", cpu); + + if (cpu != 0) // only got one cpu in this particular system + BUG(); + cur_time = get_jiffies_64(); spin_lock(&cpufreq_stats_lock); stat = per_cpu(cpufreq_stats_table, cpu); + + printk(KERN_WARNING " max_state=%d last_index=%d\n", stat->max_state, stat->last_index); + + if (stat->last_index > stat->max_state * stat->max_state) + BUG(); + if (stat->time_in_state) stat->time_in_state[stat->last_index] cputime64_add(stat->time_in_state[stat->last_index], -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-14 00:13 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
Tobias Diedrich wrote:> Konrad Rzeszutek Wilk wrote: > > > [ 5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 20:20:00 UTC (1307996400) > > > [ 5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) > > > [ 5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > > [ 5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > > [ 5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > > [ 5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > > [ 5.531460] Marking TSC unstable due to cpufreq changes > > > [ 5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0 > > > [ 5.531802] BUG: unable to handle kernel paging request at ffff880807e07b78 > > > [ 5.531982] IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b > > > > For this one, you will have to fire out gdb and disassemble the code to > > figure out where it failed. Look for ''gdb vmlinux'' and ''disassembly'' on this > > mailing list - that should provide some hints. > > Probably because of the ''fid trans failed'' stat->last_index is -1It''s set to -1 in cpufreq_stats_create_table(), the second call to freq_table_get_index() doesn''t check against -1 (expecting the call to always succeed): stat->last_time = get_jiffies_64(); stat->last_index = freq_table_get_index(stat, policy->cur); -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Konrad Rzeszutek Wilk
2011-Jun-14 01:34 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
On Tue, Jun 14, 2011 at 02:13:33AM +0200, Tobias Diedrich wrote:> Tobias Diedrich wrote: > > Konrad Rzeszutek Wilk wrote: > > > > [ 5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 20:20:00 UTC (1307996400) > > > > [ 5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) > > > > [ 5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > > > [ 5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > > > [ 5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > > > [ 5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > > > [ 5.531460] Marking TSC unstable due to cpufreq changes > > > > [ 5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0 > > > > [ 5.531802] BUG: unable to handle kernel paging request at ffff880807e07b78 > > > > [ 5.531982] IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b > > > > > > For this one, you will have to fire out gdb and disassemble the code to > > > figure out where it failed. Look for ''gdb vmlinux'' and ''disassembly'' on this > > > mailing list - that should provide some hints. > > > > Probably because of the ''fid trans failed'' stat->last_index is -1 > > It''s set to -1 in cpufreq_stats_create_table(), the second call to > freq_table_get_index() doesn''t check against -1 (expecting the call > to always succeed): > > stat->last_time = get_jiffies_64(); > stat->last_index = freq_table_get_index(stat, policy->cur);What is policy->cur? Is is 800000 ? If so, does this fix your problem: diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 83479b6..9be00d9 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -1079,7 +1079,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, } res = transition_fid_vid(data, fid, vid); - freqs.new = find_khz_freq_from_fid(data->currfid); + if (!res) + freqs.new = find_khz_freq_from_fid(data->currfid); for_each_cpu(i, data->available_cores) { freqs.cpu = i; _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-14 13:46 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
Konrad Rzeszutek Wilk wrote:> On Tue, Jun 14, 2011 at 02:13:33AM +0200, Tobias Diedrich wrote: > > Tobias Diedrich wrote: > > > Konrad Rzeszutek Wilk wrote: > > > > > [ 5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 20:20:00 UTC (1307996400) > > > > > [ 5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) > > > > > [ 5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > > > > [ 5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > > > > [ 5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > > > > [ 5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > > > > [ 5.531460] Marking TSC unstable due to cpufreq changes > > > > > [ 5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0 > > > > > [ 5.531802] BUG: unable to handle kernel paging request at ffff880807e07b78 > > > > > [ 5.531982] IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b > > > > > > > > For this one, you will have to fire out gdb and disassemble the code to > > > > figure out where it failed. Look for ''gdb vmlinux'' and ''disassembly'' on this > > > > mailing list - that should provide some hints. > > > > > > Probably because of the ''fid trans failed'' stat->last_index is -1 > > > > It''s set to -1 in cpufreq_stats_create_table(), the second call to > > freq_table_get_index() doesn''t check against -1 (expecting the call > > to always succeed): > > > > stat->last_time = get_jiffies_64(); > > stat->last_index = freq_table_get_index(stat, policy->cur); > > What is policy->cur? Is is 800000 ? If so, does this fix your problem:Yes, it is 800000, but while the patch is probably the right thing to do it doesn''t help for cpufreq_stats_create_table: [ 5.740826] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 5.740941] powernow-k8: fid 0xa (1800 MHz), vid 0xa [ 5.741057] powernow-k8: fid 0xc (2000 MHz), vid 0x8 [ 5.741170] powernow-k8: fid 0xe (2200 MHz), vid 0x8 [ 5.741304] cpufreq_stats_create_table: policy->cur is 800000 [ 5.741475] last_index set to -1 in cpufreq_stats_create_table! I think policy->cur used here probably set in powernowk8_cpu_init.> diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c > index 83479b6..9be00d9 100644 > --- a/drivers/cpufreq/powernow-k8.c > +++ b/drivers/cpufreq/powernow-k8.c > @@ -1079,7 +1079,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, > } > > res = transition_fid_vid(data, fid, vid); > - freqs.new = find_khz_freq_from_fid(data->currfid); > + if (!res) > + freqs.new = find_khz_freq_from_fid(data->currfid); > > for_each_cpu(i, data->available_cores) { > freqs.cpu = i; > > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >-- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Konrad Rzeszutek Wilk
2011-Jun-14 17:59 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
On Tue, Jun 14, 2011 at 03:46:34PM +0200, Tobias Diedrich wrote:> Konrad Rzeszutek Wilk wrote: > > On Tue, Jun 14, 2011 at 02:13:33AM +0200, Tobias Diedrich wrote: > > > Tobias Diedrich wrote: > > > > Konrad Rzeszutek Wilk wrote: > > > > > > [ 5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 20:20:00 UTC (1307996400) > > > > > > [ 5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) > > > > > > [ 5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > > > > > [ 5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > > > > > [ 5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > > > > > [ 5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > > > > > [ 5.531460] Marking TSC unstable due to cpufreq changes > > > > > > [ 5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0 > > > > > > [ 5.531802] BUG: unable to handle kernel paging request at ffff880807e07b78 > > > > > > [ 5.531982] IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b > > > > > > > > > > For this one, you will have to fire out gdb and disassemble the code to > > > > > figure out where it failed. Look for ''gdb vmlinux'' and ''disassembly'' on this > > > > > mailing list - that should provide some hints. > > > > > > > > Probably because of the ''fid trans failed'' stat->last_index is -1 > > > > > > It''s set to -1 in cpufreq_stats_create_table(), the second call to > > > freq_table_get_index() doesn''t check against -1 (expecting the call > > > to always succeed): > > > > > > stat->last_time = get_jiffies_64(); > > > stat->last_index = freq_table_get_index(stat, policy->cur); > > > > What is policy->cur? Is is 800000 ? If so, does this fix your problem: > > Yes, it is 800000, but while the patch is probably the right thing > to do it doesn''t help for cpufreq_stats_create_table: > [ 5.740826] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > [ 5.740941] powernow-k8: fid 0xa (1800 MHz), vid 0xa > [ 5.741057] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > [ 5.741170] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > [ 5.741304] cpufreq_stats_create_table: policy->cur is 800000 > [ 5.741475] last_index set to -1 in cpufreq_stats_create_table! > > I think policy->cur used here probably set in powernowk8_cpu_init.Yup, and there is not much that can be done there. Lets try this patch diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 2368e38..7e4a664 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1079,8 +1079,10 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, } res = transition_fid_vid(data, fid, vid); - freqs.new = find_khz_freq_from_fid(data->currfid); + if (res) + return res; + freqs.new = find_khz_freq_from_fid(data->currfid); for_each_cpu(i, data->available_cores) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); @@ -1112,6 +1114,9 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, } res = transition_pstate(data, pstate); + if (res) + return res; + freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu(i, data->available_cores) { diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 4f1b8de..0ecb1e2 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -298,11 +298,13 @@ static int cpufreq_stat_notifier_trans(struct notifier_block *nb, old_index = stat->last_index; new_index = freq_table_get_index(stat, freq->new); - cpufreq_stats_update(freq->cpu); - if (old_index == new_index) + /* We can''t do stat->time_in_state[-1]= .. */ + if (old_index == -1 || new_index == -1) return 0; - if (old_index == -1 || new_index == -1) + cpufreq_stats_update(freq->cpu); + + if (old_index == new_index) return 0; spin_lock(&cpufreq_stats_lock); _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-14 21:28 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
Konrad Rzeszutek Wilk wrote:> On Tue, Jun 14, 2011 at 03:46:34PM +0200, Tobias Diedrich wrote: > > [ 5.740826] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > [ 5.740941] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > [ 5.741057] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > [ 5.741170] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > [ 5.741304] cpufreq_stats_create_table: policy->cur is 800000 > > [ 5.741475] last_index set to -1 in cpufreq_stats_create_table! > > > > I think policy->cur used here probably set in powernowk8_cpu_init. > > Yup, and there is not much that can be done there. Lets try this patchThanks, this works fine for suppressing the crash.> diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c > index 2368e38..7e4a664 100644 > --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c > +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c > @@ -1079,8 +1079,10 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, > } > > res = transition_fid_vid(data, fid, vid); > - freqs.new = find_khz_freq_from_fid(data->currfid); > + if (res) > + return res; > > + freqs.new = find_khz_freq_from_fid(data->currfid); > for_each_cpu(i, data->available_cores) { > freqs.cpu = i; > cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); > @@ -1112,6 +1114,9 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, > } > > res = transition_pstate(data, pstate); > + if (res) > + return res; > + > freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); > > for_each_cpu(i, data->available_cores) { > diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c > index 4f1b8de..0ecb1e2 100644 > --- a/drivers/cpufreq/cpufreq_stats.c > +++ b/drivers/cpufreq/cpufreq_stats.c > @@ -298,11 +298,13 @@ static int cpufreq_stat_notifier_trans(struct notifier_block *nb, > old_index = stat->last_index; > new_index = freq_table_get_index(stat, freq->new); > > - cpufreq_stats_update(freq->cpu); > - if (old_index == new_index) > + /* We can''t do stat->time_in_state[-1]= .. */ > + if (old_index == -1 || new_index == -1) > return 0; > > - if (old_index == -1 || new_index == -1) > + cpufreq_stats_update(freq->cpu); > + > + if (old_index == new_index) > return 0; > > spin_lock(&cpufreq_stats_lock);-- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Konrad Rzeszutek Wilk
2011-Jun-15 12:38 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
On Tue, Jun 14, 2011 at 11:28:27PM +0200, Tobias Diedrich wrote:> Konrad Rzeszutek Wilk wrote: > > On Tue, Jun 14, 2011 at 03:46:34PM +0200, Tobias Diedrich wrote: > > > [ 5.740826] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > > [ 5.740941] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > > [ 5.741057] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > > [ 5.741170] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > > [ 5.741304] cpufreq_stats_create_table: policy->cur is 800000 > > > [ 5.741475] last_index set to -1 in cpufreq_stats_create_table! > > > > > > I think policy->cur used here probably set in powernowk8_cpu_init. > > > > Yup, and there is not much that can be done there. Lets try this patch > > Thanks, this works fine for suppressing the crash.OK, can you do one more test? Can you reboot the kernel without Xen and see whether the baremetal kernel still works? Wouldn''t want to cause a regression. Is it OK if I stick Reported-by/Tested-by: Tobias .. on the patches for upstream submission?> > > diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c > > index 2368e38..7e4a664 100644 > > --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c > > +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c > > @@ -1079,8 +1079,10 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, > > } > > > > res = transition_fid_vid(data, fid, vid); > > - freqs.new = find_khz_freq_from_fid(data->currfid); > > + if (res) > > + return res; > > > > + freqs.new = find_khz_freq_from_fid(data->currfid); > > for_each_cpu(i, data->available_cores) { > > freqs.cpu = i; > > cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); > > @@ -1112,6 +1114,9 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, > > } > > > > res = transition_pstate(data, pstate); > > + if (res) > > + return res; > > + > > freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); > > > > for_each_cpu(i, data->available_cores) { > > diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c > > index 4f1b8de..0ecb1e2 100644 > > --- a/drivers/cpufreq/cpufreq_stats.c > > +++ b/drivers/cpufreq/cpufreq_stats.c > > @@ -298,11 +298,13 @@ static int cpufreq_stat_notifier_trans(struct notifier_block *nb, > > old_index = stat->last_index; > > new_index = freq_table_get_index(stat, freq->new); > > > > - cpufreq_stats_update(freq->cpu); > > - if (old_index == new_index) > > + /* We can''t do stat->time_in_state[-1]= .. */ > > + if (old_index == -1 || new_index == -1) > > return 0; > > > > - if (old_index == -1 || new_index == -1) > > + cpufreq_stats_update(freq->cpu); > > + > > + if (old_index == new_index) > > return 0; > > > > spin_lock(&cpufreq_stats_lock); > > -- > Tobias PGP: http://8ef7ddba.uguu.de > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tobias Diedrich
2011-Jun-15 14:16 UTC
[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!
Konrad Rzeszutek Wilk wrote:> On Tue, Jun 14, 2011 at 11:28:27PM +0200, Tobias Diedrich wrote: > > Konrad Rzeszutek Wilk wrote: > > > On Tue, Jun 14, 2011 at 03:46:34PM +0200, Tobias Diedrich wrote: > > > > [ 5.740826] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > > > > [ 5.740941] powernow-k8: fid 0xa (1800 MHz), vid 0xa > > > > [ 5.741057] powernow-k8: fid 0xc (2000 MHz), vid 0x8 > > > > [ 5.741170] powernow-k8: fid 0xe (2200 MHz), vid 0x8 > > > > [ 5.741304] cpufreq_stats_create_table: policy->cur is 800000 > > > > [ 5.741475] last_index set to -1 in cpufreq_stats_create_table! > > > > > > > > I think policy->cur used here probably set in powernowk8_cpu_init. > > > > > > Yup, and there is not much that can be done there. Lets try this patch > > > > Thanks, this works fine for suppressing the crash. > > OK, can you do one more test? Can you reboot the kernel without Xen > and see whether the baremetal kernel still works? Wouldn''t want to > cause a regression.Just tested it, no error messages from powernow-k8/cpufreq in dmesg, ondemand switching seems to work when running powertop in one shell and "while true; do :; done" in another. cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: powernow-k8 CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 1.24 ms. hardware limits: 1000 MHz - 2.20 GHz available frequency steps: 1000 MHz, 1.80 GHz, 2.00 GHz, 2.20 GHz available cpufreq governors: ondemand, performance current policy: frequency should be within 1000 MHz and 2.20 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1000 MHz (asserted by call to hardware). cpufreq stats: 1000 MHz:96.68%, 1.80 GHz:0.00%, 2.00 GHz:0.00%, 2.20 GHz:3.32% (3)> Is it OK if I stick Reported-by/Tested-by: Tobias .. on the patches > for upstream submission?Sure, no problem. dmesg from boot: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #56 SMP Tue Jun 14 23:22:08 CEST 2011 [ 0.000000] Command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-7094/MS-7094, BIOS V3.6 10/12/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ f0000000 old size 32 MB [ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) [ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable [ 0.000000] 2 base 00F0000000 mask FFF8000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fef0000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fef0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fef0000 @ 7feec000-7fef0000 [ 0.000000] ACPI: RSDP 00000000000f8dc0 00014 (v00 VIAK8T) [ 0.000000] ACPI: RSDT 000000007fef3040 00030 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fef30c0 00074 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fef3180 04F07 (v01 VIAK8T AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007fef0000 00040 [ 0.000000] ACPI: SRAT 000000007fef8300 00090 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: APIC 000000007fef8100 00068 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fef0 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3925 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7109 pages used for memmap [ 0.000000] DMA32 zone: 512811 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7ed00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79488 r8192 d22912 u1048576 [ 0.000000] pcpu-alloc: s79488 r8192 d22912 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516736 [ 0.000000] Kernel command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ f0000000 old size 32 MB [ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) [ 0.000000] Node 0: aperture @ f0000000 size 128 MB [ 0.000000] Memory: 2050316k/2096064k available (6122k kernel code, 452k absent, 45296k reserved, 4761k data, 576k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Console: colour VGA+ 80x50 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try ''cgroup_disable=memory'' option if you don''t want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2199.474 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.020098] Calibrating delay loop (skipped), value calculated using timer frequency.. 4398.94 BogoMIPS (lpj=21994740) [ 0.020281] pid_max: default: 32768 minimum: 301 [ 0.020444] Mount-cache hash table entries: 256 [ 0.020700] Initializing cgroup subsys cpuacct [ 0.020797] Initializing cgroup subsys memory [ 0.020899] Initializing cgroup subsys net_cls [ 0.020990] Initializing cgroup subsys blkio [ 0.021107] tseg: 007ff00000 [ 0.021109] mce: CPU supports 5 MCE banks [ 0.021238] SMP alternatives: switching to UP code [ 0.036043] ACPI: Core revision 20110413 [ 0.039847] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.139943] CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 02 [ 0.150000] Performance Events: AMD PMU driver. [ 0.150000] ... version: 0 [ 0.150000] ... bit width: 48 [ 0.150000] ... generic registers: 4 [ 0.150000] ... value mask: 0000ffffffffffff [ 0.150000] ... max period: 00007fffffffffff [ 0.150000] ... fixed-purpose events: 0 [ 0.150000] ... event mask: 000000000000000f [ 0.150000] NMI watchdog enabled, takes one hw-pmu counter. [ 0.150000] Brought up 1 CPUs [ 0.150000] Total of 1 processors activated (4398.94 BogoMIPS). [ 0.150000] devtmpfs: initialized [ 0.150000] xor: automatically using best checksumming function: generic_sse [ 0.190002] generic_sse: 7038.400 MB/sec [ 0.190092] xor: using function: generic_sse (7038.400 MB/sec) [ 0.190223] NET: Registered protocol family 16 [ 0.190580] node 0 link 0: io port [1000, fffff] [ 0.190583] TOM: 0000000080000000 aka 2048M [ 0.190675] node 0 link 0: mmio [a0000, bffff] [ 0.190678] node 0 link 0: mmio [80000000, ff70ffff] [ 0.190681] bus: [00, ff] on node 0 link 0 [ 0.190684] bus: 00 index 0 [io 0x0000-0xffff] [ 0.190687] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.190689] bus: 00 index 2 [mem 0x80000000-0xfcffffffff] [ 0.190699] ACPI: bus type pci registered [ 0.190872] PCI: Using configuration type 1 for base access [ 0.197527] bio: create slab <bio-0> at 0 [ 0.360017] raid6: int64x1 2045 MB/s [ 0.530007] raid6: int64x2 2394 MB/s [ 0.700020] raid6: int64x4 1697 MB/s [ 0.870043] raid6: int64x8 1237 MB/s [ 1.040009] raid6: sse2x1 2668 MB/s [ 1.210004] raid6: sse2x2 3525 MB/s [ 1.380007] raid6: sse2x4 3950 MB/s [ 1.380096] raid6: using algorithm sse2x4 (3950 MB/s) [ 1.380732] ACPI: EC: Look up EC in DSDT [ 1.384063] ACPI: Interpreter enabled [ 1.384156] ACPI: (supports S0 S5) [ 1.384272] ACPI: Using IOAPIC for interrupt routing [ 1.389348] ACPI: No dock devices found. [ 1.389442] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 1.389668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.389891] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 1.389895] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 1.389898] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 1.389901] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 1.389904] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 1.389924] pci 0000:00:00.0: [1106:0282] type 0 class 0x000600 [ 1.389933] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 1.390013] pci 0000:00:00.1: [1106:1282] type 0 class 0x000600 [ 1.390051] pci 0000:00:00.2: [1106:2282] type 0 class 0x000600 [ 1.390087] pci 0000:00:00.3: [1106:3282] type 0 class 0x000600 [ 1.390124] pci 0000:00:00.4: [1106:4282] type 0 class 0x000600 [ 1.390162] pci 0000:00:00.7: [1106:7282] type 0 class 0x000600 [ 1.390201] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604 [ 1.390236] pci 0000:00:01.0: supports D1 [ 1.390260] pci 0000:00:09.0: [10ec:8139] type 0 class 0x000200 [ 1.390275] pci 0000:00:09.0: reg 10: [io 0xe000-0xe0ff] [ 1.390284] pci 0000:00:09.0: reg 14: [mem 0xfc122000-0xfc1220ff] [ 1.390317] pci 0000:00:09.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.390334] pci 0000:00:09.0: supports D1 D2 [ 1.390336] pci 0000:00:09.0: PME# supported from D1 D2 D3hot [ 1.390341] pci 0000:00:09.0: PME# disabled [ 1.390364] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104 [ 1.390379] pci 0000:00:0f.0: reg 10: [io 0xe200-0xe207] [ 1.390388] pci 0000:00:0f.0: reg 14: [io 0xe300-0xe303] [ 1.390397] pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407] [ 1.390405] pci 0000:00:0f.0: reg 1c: [io 0xe500-0xe503] [ 1.390414] pci 0000:00:0f.0: reg 20: [io 0xe600-0xe60f] [ 1.390423] pci 0000:00:0f.0: reg 24: [io 0xe700-0xe7ff] [ 1.390462] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101 [ 1.390502] pci 0000:00:0f.1: reg 20: [io 0xe800-0xe80f] [ 1.390554] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 1.390591] pci 0000:00:10.0: reg 20: [io 0xe900-0xe91f] [ 1.390620] pci 0000:00:10.0: supports D1 D2 [ 1.390622] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.390627] pci 0000:00:10.0: PME# disabled [ 1.390644] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 1.390682] pci 0000:00:10.1: reg 20: [io 0xea00-0xea1f] [ 1.390710] pci 0000:00:10.1: supports D1 D2 [ 1.390712] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.390716] pci 0000:00:10.1: PME# disabled [ 1.390734] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 [ 1.390771] pci 0000:00:10.2: reg 20: [io 0xeb00-0xeb1f] [ 1.390800] pci 0000:00:10.2: supports D1 D2 [ 1.390802] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.390806] pci 0000:00:10.2: PME# disabled [ 1.390824] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03 [ 1.390861] pci 0000:00:10.3: reg 20: [io 0xec00-0xec1f] [ 1.390889] pci 0000:00:10.3: supports D1 D2 [ 1.390892] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.390896] pci 0000:00:10.3: PME# disabled [ 1.390913] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 [ 1.390928] pci 0000:00:10.4: reg 10: [mem 0xfc121000-0xfc1210ff] [ 1.390980] pci 0000:00:10.4: supports D1 D2 [ 1.390982] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 1.390986] pci 0000:00:10.4: PME# disabled [ 1.391007] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601 [ 1.391058] HPET not enabled in BIOS. You might try hpet=force boot option [ 1.391189] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 1.391208] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 1.391224] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 1.391240] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 1.391260] PCI: peer root bus 00 res updated from pci conf [ 1.391295] pci 0000:01:00.0: [1002:5046] type 0 class 0x000300 [ 1.391309] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 1.391316] pci 0000:01:00.0: reg 14: [io 0xd000-0xd0ff] [ 1.391323] pci 0000:01:00.0: reg 18: [mem 0xfc020000-0xfc023fff] [ 1.391344] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.391362] pci 0000:01:00.0: supports D1 [ 1.391386] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.391480] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.391484] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 1.391489] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref] [ 1.391496] pci_bus 0000:00: on NUMA node 0 [ 1.391499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.391734] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 1.414614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 1.414854] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 1.415096] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12) [ 1.415323] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.415638] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.415951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.416262] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.416573] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 1.416910] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 1.417096] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 1.417281] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. [ 1.417498] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. [ 1.417859] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.418028] vgaarb: loaded [ 1.418116] vgaarb: bridge control possible 0000:01:00.0 [ 1.418366] SCSI subsystem initialized [ 1.418569] libata version 3.00 loaded. [ 1.418650] usbcore: registered new interface driver usbfs [ 1.418804] usbcore: registered new interface driver hub [ 1.418937] usbcore: registered new device driver usb [ 1.419236] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.419329] PCI: Using ACPI for IRQ routing [ 1.419420] PCI: pci_cache_line_size set to 64 bytes [ 1.419429] pci 0000:00:00.0: address space collision: [mem 0xf0000000-0xf7ffffff pref] conflicts with GART [mem 0xf0000000-0xf7ffffff] [ 1.419661] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 1.419664] reserve RAM buffer: 000000007fef0000 - 000000007fffffff [ 1.423817] pnp: PnP ACPI init [ 1.423926] ACPI: bus type pnp registered [ 1.424205] pnp 00:00: [mem 0x000d1c00-0x000d3fff] [ 1.424208] pnp 00:00: [mem 0x000f0000-0x000f7fff] [ 1.424211] pnp 00:00: [mem 0x000f8000-0x000fbfff] [ 1.424214] pnp 00:00: [mem 0x000fc000-0x000fffff] [ 1.424216] pnp 00:00: [mem 0x7ff00000-0x7fffffff] [ 1.424219] pnp 00:00: [mem 0x7fef0000-0x7fefffff] [ 1.424221] pnp 00:00: [mem 0xffff0000-0xffffffff] [ 1.424224] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 1.424226] pnp 00:00: [mem 0x00100000-0x7feeffff] [ 1.424229] pnp 00:00: [mem 0xfec00000-0xfec00fff] [ 1.424231] pnp 00:00: [mem 0xfee00000-0xfee00fff] [ 1.424234] pnp 00:00: [mem 0xfff80000-0xfffeffff] [ 1.424242] pnp 00:00: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] [ 1.424419] pnp 00:00: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] [ 1.424595] pnp 00:00: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] [ 1.424772] pnp 00:00: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] [ 1.424949] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] [ 1.425124] pnp 00:00: disabling [mem 0x00100000-0x7feeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] [ 1.425385] system 00:00: [mem 0x7ff00000-0x7fffffff] could not be reserved [ 1.425480] system 00:00: [mem 0x7fef0000-0x7fefffff] could not be reserved [ 1.425574] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 1.425669] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.425764] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.425859] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved [ 1.425954] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.426012] pnp 00:01: [bus 00-ff] [ 1.426015] pnp 00:01: [io 0x0cf8-0x0cff] [ 1.426018] pnp 00:01: [io 0x0000-0x0cf7 window] [ 1.426021] pnp 00:01: [io 0x0d00-0xffff window] [ 1.426023] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 1.426026] pnp 00:01: [mem 0x000c0000-0x000dffff window] [ 1.426030] pnp 00:01: [mem 0x80000000-0xfebfffff window] [ 1.426102] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.426124] pnp 00:02: [io 0x4000-0x407f] [ 1.426126] pnp 00:02: [io 0x5000-0x500f] [ 1.426188] system 00:02: [io 0x4000-0x407f] has been reserved [ 1.426283] system 00:02: [io 0x5000-0x500f] has been reserved [ 1.426377] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.426946] pnp 00:03: [io 0x0010-0x001f] [ 1.426948] pnp 00:03: [io 0x0022-0x003f] [ 1.426951] pnp 00:03: [io 0x0044-0x005f] [ 1.426953] pnp 00:03: [io 0x0062-0x0063] [ 1.426956] pnp 00:03: [io 0x0065-0x006f] [ 1.426958] pnp 00:03: [io 0x0074-0x007f] [ 1.426960] pnp 00:03: [io 0x0091-0x0093] [ 1.426963] pnp 00:03: [io 0x00a2-0x00bf] [ 1.426965] pnp 00:03: [io 0x00e0-0x00ef] [ 1.426968] pnp 00:03: [io 0x0b78-0x0b7b] [ 1.426970] pnp 00:03: [io 0x0f78-0x0f7b] [ 1.426973] pnp 00:03: [io 0x0a78-0x0a7b] [ 1.426975] pnp 00:03: [io 0x0e78-0x0e7b] [ 1.426977] pnp 00:03: [io 0x0bbc-0x0bbf] [ 1.426980] pnp 00:03: [io 0x0fbc-0x0fbf] [ 1.426982] pnp 00:03: [io 0x04d0-0x04d1] [ 1.426985] pnp 00:03: [io 0x0290-0x0297] [ 1.427066] system 00:03: [io 0x0b78-0x0b7b] has been reserved [ 1.427159] system 00:03: [io 0x0f78-0x0f7b] has been reserved [ 1.427252] system 00:03: [io 0x0a78-0x0a7b] has been reserved [ 1.427345] system 00:03: [io 0x0e78-0x0e7b] has been reserved [ 1.427439] system 00:03: [io 0x0bbc-0x0bbf] has been reserved [ 1.427531] system 00:03: [io 0x0fbc-0x0fbf] has been reserved [ 1.427625] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.427718] system 00:03: [io 0x0290-0x0297] has been reserved [ 1.427811] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.427824] pnp 00:04: [dma 4] [ 1.427827] pnp 00:04: [io 0x0000-0x000f] [ 1.427830] pnp 00:04: [io 0x0080-0x0090] [ 1.427832] pnp 00:04: [io 0x0094-0x009f] [ 1.427835] pnp 00:04: [io 0x00c0-0x00df] [ 1.427890] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.427902] pnp 00:05: [io 0x0070-0x0073] [ 1.427913] pnp 00:05: [irq 8] [ 1.427969] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.427979] pnp 00:06: [io 0x0061] [ 1.428034] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.428045] pnp 00:07: [io 0x00f0-0x00ff] [ 1.428051] pnp 00:07: [irq 13] [ 1.428107] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.428213] pnp 00:08: [io 0x03f0-0x03f5] [ 1.428216] pnp 00:08: [io 0x03f7] [ 1.428221] pnp 00:08: [irq 6] [ 1.428223] pnp 00:08: [dma 2] [ 1.428295] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.428456] pnp 00:09: [io 0x03f8-0x03ff] [ 1.428462] pnp 00:09: [irq 4] [ 1.428551] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.428726] pnp 00:0a: [io 0x02f8-0x02ff] [ 1.428732] pnp 00:0a: [irq 3] [ 1.428814] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.429102] pnp 00:0b: [io 0x0378-0x037f] [ 1.429105] pnp 00:0b: [io 0x0778-0x077b] [ 1.429111] pnp 00:0b: [irq 7] [ 1.429195] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.429281] pnp 00:0c: [io 0x0060] [ 1.429284] pnp 00:0c: [io 0x0064] [ 1.429289] pnp 00:0c: [irq 1] [ 1.429348] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.429371] pnp: PnP ACPI: found 13 devices [ 1.429461] ACPI: ACPI bus type pnp unregistered [ 1.437664] Switching to clocksource acpi_pm [ 1.440031] PCI: max bus depth: 1 pci_try_num: 2 [ 1.440052] pci 0000:00:09.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref] [ 1.440223] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] [ 1.440392] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.440485] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 1.440580] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 1.440676] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref] [ 1.440854] pci 0000:00:01.0: setting latency timer to 64 [ 1.440858] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 1.440861] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 1.440864] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff] [ 1.440868] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.440870] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] [ 1.440873] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] [ 1.440923] NET: Registered protocol family 2 [ 1.441073] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 1.441670] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.444164] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.444886] TCP: Hash tables configured (established 262144 bind 65536) [ 1.444978] TCP reno registered [ 1.445068] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.445183] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.445427] NET: Registered protocol family 1 [ 1.445626] RPC: Registered named UNIX socket transport module. [ 1.445719] RPC: Registered udp transport module. [ 1.445808] RPC: Registered tcp transport module. [ 1.445898] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.446012] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 1.446197] pci 0000:01:00.0: Boot video device [ 1.446200] PCI: CLS 32 bytes, default 64 [ 1.446291] has_svm: svm not available [ 1.446380] kvm: no hardware support [ 1.454164] Switched to NOHz mode on CPU #0 [ 1.454332] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.468080] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.468281] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.468458] NTFS driver 2.1.30 [Flags: R/W]. [ 1.468674] fuse init (API version 7.16) [ 1.468834] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 1.469169] msgmni has been set to 4004 [ 1.469448] io scheduler noop registered [ 1.469537] io scheduler deadline registered [ 1.469637] io scheduler cfq registered (default) [ 1.470076] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.470247] ACPI: Power Button [PWRB] [ 1.470434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.470603] ACPI: Power Button [PWRF] [ 1.470886] ACPI: acpi_idle registered with cpuidle [ 1.472455] XENFS: not registering filesystem on non-xen platform [ 1.472630] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 1.493211] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.513970] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.514199] serial 00:0a: disabled [ 1.515538] loop: module loaded [ 1.515981] sata_via 0000:00:0f.0: version 2.6 [ 1.516109] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 1.516208] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.516415] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.516868] scsi0 : sata_via [ 1.517075] scsi1 : sata_via [ 1.517250] ata1: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe600 irq 20 [ 1.517345] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe500 bmdma 0xe608 irq 20 [ 1.517645] pata_via 0000:00:0f.1: version 0.3.4 [ 1.517654] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.518341] scsi2 : pata_via [ 1.518530] scsi3 : pata_via [ 1.519548] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14 [ 1.519643] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15 [ 1.519907] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.520027] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.520162] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 1.520253] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.520394] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.520488] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.520623] PPP generic driver version 2.4.2 [ 1.520814] PPP Deflate Compression module registered [ 1.520906] PPP BSD Compression module registered [ 1.520996] NET: Registered protocol family 24 [ 1.521563] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.521659] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.521872] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.521979] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.522449] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xffffc9000000c000, 00:e0:4c:4c:17:fb, IRQ 17 [ 1.522659] tun: Universal TUN/TAP device driver, 1.6 [ 1.522750] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.522969] usbcore: registered new interface driver cdc_ether [ 1.523094] usbcore: registered new interface driver cdc_subset [ 1.523220] usbcore: registered new interface driver zaurus [ 1.523315] cdc_ncm: 01-June-2011 [ 1.523437] usbcore: registered new interface driver cdc_ncm [ 1.523643] netconsole: local port 25360 [ 1.523734] netconsole: local IP 85.10.200.103 [ 1.523824] netconsole: interface ''eth0'' [ 1.523912] netconsole: remote port 514 [ 1.524001] netconsole: remote IP 217.160.215.119 [ 1.524091] netconsole: remote ethernet address 00:26:88:75:cf:27 [ 1.524183] netconsole: device eth0 not up yet, forcing it [ 1.524357] 8139too 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1.524900] netconsole: carrier detect appears untrustworthy, waiting 4 seconds [ 1.720013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.920301] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 1.920395] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.940316] ata1.00: configured for UDMA/133 [ 1.940537] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 1.940944] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.941153] sd 0:0:0:0: [sda] Write Protect is off [ 1.941245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.941265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 1.941796] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.959570] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.960079] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.150028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.330305] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 2.330398] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.350297] ata2.00: configured for UDMA/133 [ 2.350493] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 2.350905] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.351115] sd 1:0:0:0: [sdb] Write Protect is off [ 2.351206] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.351225] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 2.351748] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.384353] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [ 2.384857] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.538802] console [netcon0] enabled [ 5.538897] netconsole: network logging started [ 5.539091] ehci_hcd: USB 2.0 ''Enhanced'' Host Controller (EHCI) Driver [ 5.539353] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 5.539455] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.539649] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 5.539804] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 5.540057] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfc121000 [ 5.560011] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 5.560257] hub 1-0:1.0: USB hub found [ 5.560352] hub 1-0:1.0: 8 ports detected [ 5.560592] ohci_hcd: USB 1.1 ''Open'' Host Controller (OHCI) Driver [ 5.560724] uhci_hcd: USB Universal Host Controller Interface driver [ 5.560847] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.561024] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 5.561178] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 5.561371] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e900 [ 5.561629] hub 2-0:1.0: USB hub found [ 5.561728] hub 2-0:1.0: 2 ports detected [ 5.561922] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.562098] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 5.562254] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 5.566893] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000ea00 [ 5.567148] hub 3-0:1.0: USB hub found [ 5.567242] hub 3-0:1.0: 2 ports detected [ 5.567435] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.567612] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 5.567765] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 5.567958] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000eb00 [ 5.568216] hub 4-0:1.0: USB hub found [ 5.568311] hub 4-0:1.0: 2 ports detected [ 5.568505] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 5.568683] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 5.568837] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 5.569029] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00 [ 5.569284] hub 5-0:1.0: USB hub found [ 5.569379] hub 5-0:1.0: 2 ports detected [ 5.569646] usbcore: registered new interface driver cdc_acm [ 5.569740] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5.569954] usbcore: registered new interface driver usblp [ 5.570158] usbcore: registered new interface driver usbserial [ 5.570287] USB Serial support registered for generic [ 5.570417] usbcore: registered new interface driver usbserial_generic [ 5.570512] usbserial: USB Serial Driver core [ 5.570639] USB Serial support registered for pl2303 [ 5.570773] usbcore: registered new interface driver pl2303 [ 5.570866] pl2303: Prolific PL2303 USB to serial adaptor driver [ 5.571053] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.571148] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.571535] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.571809] mousedev: PS/2 mouse device common for all mice [ 5.572060] rtc_cmos 00:05: RTC can wake from S4 [ 5.572335] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.572482] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 5.572608] i2c /dev entries driver [ 5.572916] md: raid1 personality registered for level 1 [ 5.573011] md: raid6 personality registered for level 6 [ 5.573108] md: raid5 personality registered for level 5 [ 5.573205] md: raid4 personality registered for level 4 [ 5.573403] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 5.573619] cpuidle: using governor ladder [ 5.573710] cpuidle: using governor menu [ 5.574774] usbcore: registered new interface driver usbhid [ 5.574868] usbhid: USB HID core driver [ 5.575084] ALSA device list: [ 5.575174] No soundcards found. [ 5.575459] u32 classifier [ 5.575548] Actions configured [ 5.575643] Netfilter messages via NETLINK v0.30. [ 5.575760] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.575998] ctnetlink v0.93: registering with nfnetlink. [ 5.576131] IPv4 over IPv4 tunneling driver [ 5.576510] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.576654] TCP bic registered [ 5.576745] TCP cubic registered [ 5.576839] TCP westwood registered [ 5.576933] TCP hybla registered [ 5.577026] TCP vegas registered [ 5.577158] NET: Registered protocol family 10 [ 5.577623] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.577753] IPv6 over IPv4 tunneling driver [ 5.578229] NET: Registered protocol family 17 [ 5.578353] 802.1Q VLAN Support v1.8 [ 5.578448] Registering the dns_resolver key type [ 5.585932] rtc_cmos 00:05: setting system clock to 2011-06-15 14:08:58 UTC (1308146938) [ 5.586112] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) [ 5.593635] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 5.593729] powernow-k8: fid 0xa (1800 MHz), vid 0xa [ 5.593825] powernow-k8: fid 0xc (2000 MHz), vid 0x8 [ 5.593921] powernow-k8: fid 0xe (2200 MHz), vid 0x8 [ 5.594523] md: Waiting for all devices to be available before autodetect [ 5.594620] md: If you don''t use raid, use raid=noautodetect [ 5.594905] md: Autodetecting RAID arrays. [ 5.680033] md: Scanned 8 and added 8 devices. [ 5.680126] md: autorun ... [ 5.680219] md: considering sdb5 ... [ 5.680319] md: adding sdb5 ... [ 5.680417] md: sdb3 has different UUID to sdb5 [ 5.680514] md: sdb2 has different UUID to sdb5 [ 5.680613] md: sdb1 has different UUID to sdb5 [ 5.680713] md: adding sda5 ... [ 5.680810] md: sda3 has different UUID to sdb5 [ 5.680908] md: sda2 has different UUID to sdb5 [ 5.681005] md: sda1 has different UUID to sdb5 [ 5.681241] md: created md3 [ 5.681332] md: bind<sda5> [ 5.681436] md: bind<sdb5> [ 5.681531] md: running: <sdb5><sda5> [ 5.681732] bio: create slab <bio-1> at 1 [ 5.681904] md/raid1:md3: active with 2 out of 2 mirrors [ 5.682018] md3: detected capacity change from 0 to 309644754944 [ 5.682152] md: considering sdb3 ... [ 5.682250] md: adding sdb3 ... [ 5.682346] md: sdb2 has different UUID to sdb3 [ 5.682444] md: sdb1 has different UUID to sdb3 [ 5.682543] md: adding sda3 ... [ 5.682640] md: sda2 has different UUID to sdb3 [ 5.682737] md: sda1 has different UUID to sdb3 [ 5.682976] md: created md2 [ 5.683067] md: bind<sda3> [ 5.683169] md: bind<sdb3> [ 5.683264] md: running: <sdb3><sda3> [ 5.683512] md/raid1:md2: active with 2 out of 2 mirrors [ 5.683625] md2: detected capacity change from 0 to 7999520768 [ 5.683753] md: considering sdb2 ... [ 5.683848] md: adding sdb2 ... [ 5.683944] md: sdb1 has different UUID to sdb2 [ 5.684043] md: adding sda2 ... [ 5.684139] md: sda1 has different UUID to sdb2 [ 5.684387] md: created md1 [ 5.684477] md: bind<sda2> [ 5.684577] md: bind<sdb2> [ 5.684679] md: running: <sdb2><sda2> [ 5.684926] md/raid1:md1: active with 2 out of 2 mirrors [ 5.685037] md1: detected capacity change from 0 to 271319040 [ 5.685163] md: considering sdb1 ... [ 5.685259] md: adding sdb1 ... [ 5.685356] md: adding sda1 ... [ 5.685449] md: created md0 [ 5.685543] md: bind<sda1> [ 5.685647] md: bind<sdb1> [ 5.685742] md: running: <sdb1><sda1> [ 5.685995] md/raid1:md0: active with 2 out of 2 mirrors [ 5.686106] md0: detected capacity change from 0 to 2152923136 [ 5.686234] md: ... autorun DONE. [ 5.706860] md2: unknown partition table [ 5.714363] EXT3-fs: barriers not enabled [ 5.717892] kjournald starting. Commit interval 5 seconds [ 5.718005] EXT3-fs (md2): mounted filesystem with writeback data mode [ 5.718106] VFS: Mounted root (ext3 filesystem) readonly on device 9:2. [ 5.731373] devtmpfs: mounted [ 5.732699] Freeing unused kernel memory: 576k freed [ 5.733108] Write protecting the kernel read-only data: 10240k [ 5.733351] Freeing unused kernel memory: 4k freed [ 5.737110] Freeing unused kernel memory: 964k freed [ 6.013474] /etc/rcS.d/S01mountkernfs.sh start [ 6.146645] splash_progress 2 [ 6.146890] /etc/rcS.d/S02udev start [ 6.244999] udev[809]: starting version 164 [ 6.597032] md3: unknown partition table [ 6.605496] md1: unknown partition table [ 6.619599] md0: unknown partition table [ 6.966614] splash_progress 4 [ 6.966881] /etc/rcS.d/S03mdadm-raid start [ 6.972053] splash_progress 6 [ 6.972184] /etc/rcS.d/S03mountdevsubfs.sh start [ 6.980321] splash_progress 8 [ 6.980570] /etc/rcS.d/S04bootlogd start [ 7.017156] splash_progress 11 [ 7.017404] /etc/rcS.d/S05keyboard-setup start [ 7.187111] splash_progress 13 [ 7.187413] /etc/rcS.d/S06hostname.sh start [ 7.201400] splash_progress 15 [ 7.201533] /etc/rcS.d/S06hwclockfirst.sh start [ 7.203281] splash_progress 17 [ 7.203406] /etc/rcS.d/S06lvm2 start [ 7.470792] splash_progress 19 [ 7.471056] /etc/rcS.d/S07checkroot.sh start [ 7.493962] Adding 2102460k swap on /dev/md0. Priority:-1 extents:1 across:2102460k [ 7.511448] EXT3-fs (md2): using internal journal [ 7.549361] splash_progress 22 [ 7.549695] /etc/rcS.d/S08hwclock.sh start [ 7.551686] splash_progress 24 [ 7.551813] /etc/rcS.d/S08ifupdown-clean start [ 7.567623] splash_progress 26 [ 7.567758] /etc/rcS.d/S08module-init-tools start [ 7.572863] splash_progress 28 [ 7.572994] /etc/rcS.d/S08mtab.sh start [ 7.635720] splash_progress 30 [ 7.635998] /etc/rcS.d/S09checkfs.sh start [ 7.701409] splash_progress 33 [ 7.701682] /etc/rcS.d/S10ifupdown start [ 7.708168] splash_progress 35 [ 7.708301] /etc/rcS.d/S10mountall.sh start [ 7.827223] EXT3-fs: barriers not enabled [ 7.837995] kjournald starting. Commit interval 5 seconds [ 7.838100] EXT3-fs (md1): warning: maximal mount count reached, running e2fsck is recommended [ 7.859805] EXT3-fs (md1): using internal journal [ 7.859901] EXT3-fs (md1): mounted filesystem with writeback data mode [ 7.885698] splash_progress 37 [ 7.885956] /etc/rcS.d/S11mountall-bootclean.sh start [ 7.938113] splash_progress 39 [ 7.938361] /etc/rcS.d/S12mountoverflowtmp start [ 7.954407] splash_progress 41 [ 7.954741] /etc/rcS.d/S13networking start [ 7.956410] Configuring network interfaces [ 8.611625] netconsole: network logging stopped on interface eth0 as it is joining a master device [ 8.611814] device eth0 entered promiscuous mode [ 8.615999] br0: port 1(eth0) entering forwarding state [ 8.616097] br0: port 1(eth0) entering forwarding state [ 9.610024] br0: port 1(eth0) entering forwarding state [ 9.742593] network interfaces configured [ 9.742838] splash_progress 44 [ 9.742955] /etc/rcS.d/S13procps start [ 9.762853] splash_progress 46 [ 9.762972] /etc/rcS.d/S13udev-mtab start [ 9.774548] splash_progress 48 [ 9.774668] /etc/rcS.d/S13urandom start [ 9.885408] splash_progress 50 [ 9.885669] /etc/rcS.d/S14mountnfs.sh start [ 9.888207] splash_progress 52 [ 9.888437] /etc/rcS.d/S15mountnfs-bootclean.sh start [ 9.904577] splash_progress 55 [ 9.904811] /etc/rcS.d/S16kbd start [ 10.014870] splash_progress 57 [ 10.015109] /etc/rcS.d/S17console-setup start [ 10.185111] splash_progress 59 [ 10.203573] /etc/rcS.d/S18bootmisc.sh start [ 10.224406] splash_progress 61 [ 10.224528] /etc/rcS.d/S18screen-cleanup start [ 10.267160] splash_progress 63 [ 10.267409] /etc/rcS.d/S19stop-bootlogd-single start [ 10.269192] splash_progress 66 [ 10.290808] /etc/rc2.d/S01rsyslog start [ 10.439750] splash_progress 67 [ 10.439871] /etc/rc2.d/S01sudo start [ 10.487166] splash_progress 69 [ 10.487309] /etc/rc2.d/S01xend start [ 10.510767] splash_progress 71 [ 10.511191] /etc/rc2.d/S02acpid start [ 10.544147] splash_progress 73 [ 10.544268] /etc/rc2.d/S02bind9 start [ 10.941185] splash_progress 75 [ 10.941305] /etc/rc2.d/S02loadcpufreq start [ 10.986515] splash_progress 77 [ 10.986635] /etc/rc2.d/S02mdadm start [ 10.995983] splash_progress 78 [ 10.996103] /etc/rc2.d/S02ntp start [ 11.064937] splash_progress 80 [ 11.065058] /etc/rc2.d/S02smartmontools start [ 11.074035] splash_progress 82 [ 11.074157] /etc/rc2.d/S02ssh start [ 11.207009] sshd (1625): /proc/1625/oom_adj is deprecated, please use /proc/1625/oom_score_adj instead. [ 11.211599] splash_progress 84 [ 11.211720] /etc/rc2.d/S02xendomains start [ 11.257901] splash_progress 86 [ 11.258270] /etc/rc2.d/S03bootlogs start [ 11.362275] splash_progress 88 [ 11.362398] /etc/rc2.d/S03cpufrequtils start [ 11.389910] splash_progress 89 [ 11.390126] /etc/rc2.d/S03cron start [ 11.487976] splash_progress 91 [ 11.488096] /etc/rc2.d/S03rsync start [ 11.491718] splash_progress 93 [ 11.492012] /etc/rc2.d/S04rc.local start [ 11.495195] splash_progress 95 [ 11.495317] /etc/rc2.d/S04rmnologin start [ 11.497180] splash_progress 97 [ 11.497300] /etc/rc2.d/S04stop-bootlogd start [ 12.545313] splash_progress 99 [ 16.120016] eth0: no IPv6 routers present [ 19.140028] br0: no IPv6 routers present -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users