Jean Baptiste FAVRE
2010-Apr-22 21:14 UTC
[Xen-users] Xen4 on Debian Lenny - Migration completed
Hello, Just a quick word to advice you that I successfully installed Xen 4 on Debian Lenny. Everything worked like a charm. My 2 nodes cluster is fully powered with Xen4 since this evening. I''ll publish an howto as soon as possible and will keep you updated. Many thanks for your work. Regards, JB _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Olivier LAMBERT
2010-Apr-26 10:25 UTC
Re: [Xen-users] Xen4 on Debian Lenny - Migration completed
Hi, Can you explain : - which kernel (Dom0 and DomU) do you use (.deb created or "bare" compilation) - pvops ? - global architecture Thank you ! Olivier. On Thu, Apr 22, 2010 at 11:14 PM, Jean Baptiste FAVRE <xen-users@jbfavre.org> wrote:> Hello, > Just a quick word to advice you that I successfully installed Xen 4 on > Debian Lenny. > Everything worked like a charm. > > My 2 nodes cluster is fully powered with Xen4 since this evening. > > I''ll publish an howto as soon as possible and will keep you updated. > > Many thanks for your work. Regards, > JB > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Olivier LAMBERT
2010-Apr-26 10:25 UTC
Re: [Xen-users] Xen4 on Debian Lenny - Migration completed
Oh, nevermind, I found it : http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian Thanks ! Olivier. On Mon, Apr 26, 2010 at 12:25 PM, Olivier LAMBERT <lambert.olivier@gmail.com> wrote:> Hi, > > Can you explain : > - which kernel (Dom0 and DomU) do you use (.deb created or "bare" compilation) > - pvops ? > - global architecture > > Thank you ! > > > Olivier. > > On Thu, Apr 22, 2010 at 11:14 PM, Jean Baptiste FAVRE > <xen-users@jbfavre.org> wrote: >> Hello, >> Just a quick word to advice you that I successfully installed Xen 4 on >> Debian Lenny. >> Everything worked like a charm. >> >> My 2 nodes cluster is fully powered with Xen4 since this evening. >> >> I''ll publish an howto as soon as possible and will keep you updated. >> >> Many thanks for your work. Regards, >> JB >> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Jean Baptiste FAVRE
2010-Apr-26 12:46 UTC
Re: [Xen-users] Xen4 on Debian Lenny - Migration completed
Hello Olivier, As I mentionned in my installation report, I''m writing a Howto. You pointed it, but I''m still writing english translation ;-) I hope to be able to release it today evening or tomorrow. For sure, I''ll keep the list updated. Regards, JB On 26/04/2010 12:25, Olivier LAMBERT wrote:> Oh, nevermind, I found it : > http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian > > Thanks ! > > > Olivier. > > On Mon, Apr 26, 2010 at 12:25 PM, Olivier LAMBERT > <lambert.olivier@gmail.com> wrote: >> Hi, >> >> Can you explain : >> - which kernel (Dom0 and DomU) do you use (.deb created or "bare" compilation) >> - pvops ? >> - global architecture >> >> Thank you ! >> >> >> Olivier. >> >> On Thu, Apr 22, 2010 at 11:14 PM, Jean Baptiste FAVRE >> <xen-users@jbfavre.org> wrote: >>> Hello, >>> Just a quick word to advice you that I successfully installed Xen 4 on >>> Debian Lenny. >>> Everything worked like a charm. >>> >>> My 2 nodes cluster is fully powered with Xen4 since this evening. >>> >>> I''ll publish an howto as soon as possible and will keep you updated. >>> >>> Many thanks for your work. Regards, >>> JB >>> >>> >>> _______________________________________________ >>> Xen-users mailing list >>> Xen-users@lists.xensource.com >>> http://lists.xensource.com/xen-users >>> >> > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Olivier LAMBERT
2010-Apr-26 13:04 UTC
Re: [Xen-users] Xen4 on Debian Lenny - Migration completed
Your howto is enough for me (because I''m french), but it''s great to provide an english translation ! Regards, Olivier. On Mon, Apr 26, 2010 at 2:46 PM, Jean Baptiste FAVRE <xen-users@jbfavre.org> wrote:> Hello Olivier, > As I mentionned in my installation report, I''m writing a Howto. > You pointed it, but I''m still writing english translation ;-) > > I hope to be able to release it today evening or tomorrow. > For sure, I''ll keep the list updated. > > Regards, > JB > > On 26/04/2010 12:25, Olivier LAMBERT wrote: >> >> Oh, nevermind, I found it : >> >> http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian >> >> Thanks ! >> >> >> Olivier. >> >> On Mon, Apr 26, 2010 at 12:25 PM, Olivier LAMBERT >> <lambert.olivier@gmail.com> wrote: >>> >>> Hi, >>> >>> Can you explain : >>> - which kernel (Dom0 and DomU) do you use (.deb created or "bare" >>> compilation) >>> - pvops ? >>> - global architecture >>> >>> Thank you ! >>> >>> >>> Olivier. >>> >>> On Thu, Apr 22, 2010 at 11:14 PM, Jean Baptiste FAVRE >>> <xen-users@jbfavre.org> wrote: >>>> >>>> Hello, >>>> Just a quick word to advice you that I successfully installed Xen 4 on >>>> Debian Lenny. >>>> Everything worked like a charm. >>>> >>>> My 2 nodes cluster is fully powered with Xen4 since this evening. >>>> >>>> I''ll publish an howto as soon as possible and will keep you updated. >>>> >>>> Many thanks for your work. Regards, >>>> JB >>>> >>>> >>>> _______________________________________________ >>>> Xen-users mailing list >>>> Xen-users@lists.xensource.com >>>> http://lists.xensource.com/xen-users >>>> >>> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Jean Baptiste FAVRE
2010-Apr-26 18:29 UTC
[Xen-users] Re: Xen4 on Debian Lenny - Migration completed
hello, I just published the english translation for my migration howto under Debian lenny. I just hope that everything is correct in it. http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian Comments welcome, Regards, JB On 22/04/2010 23:14, Jean Baptiste FAVRE wrote:> Hello, > Just a quick word to advice you that I successfully installed Xen 4 on > Debian Lenny. > Everything worked like a charm. > > My 2 nodes cluster is fully powered with Xen4 since this evening. > > I''ll publish an howto as soon as possible and will keep you updated. > > Many thanks for your work. Regards, > JB_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Olivier LAMBERT
2010-Apr-27 13:21 UTC
Re: [Xen-users] Re: Xen4 on Debian Lenny - Migration completed
Just a question : with "make xen" and "make tools", I haven''t an "install.sh" script in my folder. No more luck with a locate. Should I need to make install ? (it''s not precise in your howto). Regards, Olivier. On Mon, Apr 26, 2010 at 8:29 PM, Jean Baptiste FAVRE <xen-users@jbfavre.org> wrote:> hello, > I just published the english translation for my migration howto under > Debian lenny. > I just hope that everything is correct in it. > > http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian > > Comments welcome, > Regards, > JB > > On 22/04/2010 23:14, Jean Baptiste FAVRE wrote: >> Hello, >> Just a quick word to advice you that I successfully installed Xen 4 on >> Debian Lenny. >> Everything worked like a charm. >> >> My 2 nodes cluster is fully powered with Xen4 since this evening. >> >> I''ll publish an howto as soon as possible and will keep you updated. >> >> Many thanks for your work. Regards, >> JB > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Jean Baptiste FAVRE
2010-Apr-27 13:50 UTC
Re: [Xen-users] Re: Xen4 on Debian Lenny - Migration completed
Hello olivier, That''s right, install.sh is not in dist directory. But you can find it in xen root dir. Then move it into dist directory before building archive. It should do the trick Regards, JB On 27/04/2010 15:21, Olivier LAMBERT wrote:> Just a question : with "make xen" and "make tools", I haven''t an > "install.sh" script in my folder. No more luck with a locate. Should I > need to make install ? (it''s not precise in your howto). > > Regards, > > Olivier. > > On Mon, Apr 26, 2010 at 8:29 PM, Jean Baptiste FAVRE > <xen-users@jbfavre.org> wrote: >> hello, >> I just published the english translation for my migration howto under >> Debian lenny. >> I just hope that everything is correct in it. >> >> http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian >> >> Comments welcome, >> Regards, >> JB >> >> On 22/04/2010 23:14, Jean Baptiste FAVRE wrote: >>> Hello, >>> Just a quick word to advice you that I successfully installed Xen 4 on >>> Debian Lenny. >>> Everything worked like a charm. >>> >>> My 2 nodes cluster is fully powered with Xen4 since this evening. >>> >>> I''ll publish an howto as soon as possible and will keep you updated. >>> >>> Many thanks for your work. Regards, >>> JB >> >> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Jean Baptiste FAVRE
2010-Apr-27 13:54 UTC
Re: [Xen-users] Re: Xen4 on Debian Lenny - Migration completed
Another solution is to execute "make dist". This Makefile target will copy install.sh into dist dir (upon many other things like building documentation). But then, you''ll get kernels built, which is not something I wanted. I''ll update my howto with this information. Regards, JB On 27/04/2010 15:50, Jean Baptiste FAVRE wrote:> Hello olivier, > That''s right, install.sh is not in dist directory. > But you can find it in xen root dir. > Then move it into dist directory before building archive. It should do > the trick > > Regards, > JB > > > On 27/04/2010 15:21, Olivier LAMBERT wrote: >> Just a question : with "make xen" and "make tools", I haven''t an >> "install.sh" script in my folder. No more luck with a locate. Should I >> need to make install ? (it''s not precise in your howto). >> >> Regards, >> >> Olivier. >> >> On Mon, Apr 26, 2010 at 8:29 PM, Jean Baptiste FAVRE >> <xen-users@jbfavre.org> wrote: >>> hello, >>> I just published the english translation for my migration howto under >>> Debian lenny. >>> I just hope that everything is correct in it. >>> >>> http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian >>> >>> >>> Comments welcome, >>> Regards, >>> JB >>> >>> On 22/04/2010 23:14, Jean Baptiste FAVRE wrote: >>>> Hello, >>>> Just a quick word to advice you that I successfully installed Xen 4 on >>>> Debian Lenny. >>>> Everything worked like a charm. >>>> >>>> My 2 nodes cluster is fully powered with Xen4 since this evening. >>>> >>>> I''ll publish an howto as soon as possible and will keep you updated. >>>> >>>> Many thanks for your work. Regards, >>>> JB >>> >>> >>> >>> _______________________________________________ >>> Xen-users mailing list >>> Xen-users@lists.xensource.com >>> http://lists.xensource.com/xen-users >>> >> > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Olivier LAMBERT
2010-Apr-27 14:58 UTC
Re: [Xen-users] Re: Xen4 on Debian Lenny - Migration completed
Damn it ! now I''ve got an issue, this one : http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576608 Invalid output format udev. Choose from value, device, list, or full And I can''t install this kernel. Maybe trying a on clean system ? Olivier. On Tue, Apr 27, 2010 at 3:54 PM, Jean Baptiste FAVRE <xen-users@jbfavre.org> wrote:> Another solution is to execute "make dist". > This Makefile target will copy install.sh into dist dir (upon many other > things like building documentation). But then, you''ll get kernels built, > which is not something I wanted. > > I''ll update my howto with this information. > > Regards, > JB > > On 27/04/2010 15:50, Jean Baptiste FAVRE wrote: >> >> Hello olivier, >> That''s right, install.sh is not in dist directory. >> But you can find it in xen root dir. >> Then move it into dist directory before building archive. It should do >> the trick >> >> Regards, >> JB >> >> >> On 27/04/2010 15:21, Olivier LAMBERT wrote: >>> >>> Just a question : with "make xen" and "make tools", I haven''t an >>> "install.sh" script in my folder. No more luck with a locate. Should I >>> need to make install ? (it''s not precise in your howto). >>> >>> Regards, >>> >>> Olivier. >>> >>> On Mon, Apr 26, 2010 at 8:29 PM, Jean Baptiste FAVRE >>> <xen-users@jbfavre.org> wrote: >>>> >>>> hello, >>>> I just published the english translation for my migration howto under >>>> Debian lenny. >>>> I just hope that everything is correct in it. >>>> >>>> >>>> http://publications.jbfavre.org/virtualisation/migration_form_xen3_to_xen4_lvm_drbd_debian >>>> >>>> >>>> Comments welcome, >>>> Regards, >>>> JB >>>> >>>> On 22/04/2010 23:14, Jean Baptiste FAVRE wrote: >>>>> >>>>> Hello, >>>>> Just a quick word to advice you that I successfully installed Xen 4 on >>>>> Debian Lenny. >>>>> Everything worked like a charm. >>>>> >>>>> My 2 nodes cluster is fully powered with Xen4 since this evening. >>>>> >>>>> I''ll publish an howto as soon as possible and will keep you updated. >>>>> >>>>> Many thanks for your work. Regards, >>>>> JB >>>> >>>> >>>> >>>> _______________________________________________ >>>> Xen-users mailing list >>>> Xen-users@lists.xensource.com >>>> http://lists.xensource.com/xen-users >>>> >>> >> >> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Le mardi 27 avril 2010 à 15:50 +0200, Jean Baptiste FAVRE a écrit :> Hello olivier, > That''s right, install.sh is not in dist directory. > But you can find it in xen root dir. > Then move it into dist directory before building archive. It should do > the trick > > Regards, > JB > >I had the same problem, but after copying "install.sh" in the right place it complains about the "check" directory not present. I had to copy a "check" directory from another place. Regards JPP _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Jean Baptiste FAVRE
2010-Apr-27 15:54 UTC
Re: [Xen-users] Re: Xen4 on Debian Lenny - Migration completed
Hello, That''s right. By default, install.sh is copied into dist directory only if you execute make dist (or make world). First time I compiled Xen, I used this command. I figured after that make dist build kernels I do not need, so finally used only make xen and make tools. Concerning check directory, this is only used to check for required libs while installaling Xen on Dom0. If you follow my Howto, you shoud not have to install more libs, so you can adapt install.sh so that it does not requires check dir. Another solution is to adapt Makefile creating a custom target which will only build what you need. Regards, JB On 27/04/2010 17:49, JP P wrote:> Le mardi 27 avril 2010 à 15:50 +0200, Jean Baptiste FAVRE a écrit : >> Hello olivier, >> That''s right, install.sh is not in dist directory. >> But you can find it in xen root dir. >> Then move it into dist directory before building archive. It should do >> the trick >> >> Regards, >> JB >> >> > I had the same problem, but after copying "install.sh" in the right > place it complains about the "check" directory not present. I had to > copy a "check" directory from another place. > > Regards > > JPP > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users