Hello, finally worked out the serial console problem, and here are the logs: Xen 4.0 compiled from soure with default pvops kernel2.6.31.13 on Debian Lenny. XEN will panic with **************************************** (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option************************************** when booting with suggested noapic XEN panics with (see attached logs) (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) FATAL PAGE FAULT (XEN) [error_code=0000] (XEN) Faulting linear address: 0000000000000014 (XEN) **************************************** apic=debug gave same output like default it was not there Any ideas? Regards Matej _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Hi, Go into the bios and see if you can find ACPI HPET Table and enable it. Fixed it for me Cheers Ian -----Original Message----- From: xen-users-bounces@lists.xensource.com [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Matej Zary Sent: 20 April 2010 14:10 To: xen-users@lists.xensource.com Subject: XEN 4.0 + 2.6.31.13 - Panic on CPU 0 Hello, finally worked out the serial console problem, and here are the logs: Xen 4.0 compiled from soure with default pvops kernel2.6.31.13 on Debian Lenny. XEN will panic with **************************************** (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option************************************** when booting with suggested noapic XEN panics with (see attached logs) (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) FATAL PAGE FAULT (XEN) [error_code=0000] (XEN) Faulting linear address: 0000000000000014 (XEN) **************************************** apic=debug gave same output like default it was not there Any ideas? Regards Matej _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Hi, many thanks, solved the issue! Regards Matej -----Original Message----- From: Ian Tobin [mailto:itobin@tidyhosts.com] Sent: Tuesday, April 20, 2010 3:15 PM To: Matej Zary; xen-users@lists.xensource.com Subject: RE: XEN 4.0 + 2.6.31.13 - Panic on CPU 0 Hi, Go into the bios and see if you can find ACPI HPET Table and enable it. Fixed it for me Cheers Ian _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users