Hello list,
I ''m new on the mailing list. I''ve been using Xen for several
years, but
always with basic configurations and it worked for me, also i have several
Debian/Xen servers working on production stages and they work really fine.
But now i have some big trouble that i cannot solve, i''ll give you
some
info to see if someone can give me a hand:
Server: Sun x86
OS: Debian Lenny
Xen Hypervisor: 3.4.22
I need to configure two Nics eth0 and eth1
eth0 is a public network(Internet)
eth1 is a private network (local)
Right now i have the following configuration:
/etc/network/interfases
### Static Mode ###############
# The primary network interface
#allow-hotplug eth0
auto eth0
iface eth0 inet static
address 10.10.10.145
netmask 255.255.255.240
network 10.10.10.144
broadcast 10.10.10.159
gateway 10.10.10.158
#allow-hotplug eth1
auto eth1
iface eth1 inet static
address 192.168.10.10
netmask 255.255.255.0
network 192.168.10.0
broadcast 192.168.10.255
#gateway 192.168.10.1
/etc/xen/xend-config.sxp
(network-script network-bridge-wrapper)
(vif-script vif-bridge)
/etc/xen/scripts/network-bridge-wrapper
#!/bin/sh
dir=$(dirname "$0")
"$dir/network-bridge" "$@" vifnum=0 netdev=eth0
bridge=xenbr0
"$dir/network-bridge" "$@" vifnum=1 netdev=eth1
bridge=xenbr1
ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
peth0 Link encap:Ethernet HWaddr 00:14:4f:ca:47:b8
inet6 addr: fe80::214:4fff:feca:47b8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6292 errors:0 dropped:0 overruns:0 frame:0
TX packets:6414 errors:8 dropped:0 overruns:0 carrier:8
collisions:19 txqueuelen:100
RX bytes:580331 (566.7 KiB) TX bytes:3437154 (3.2 MiB)
Memory:fbee0000-fbf00000
peth1 Link encap:Ethernet HWaddr 00:14:4f:ca:47:b9
inet6 addr: fe80::214:4fff:feca:47b9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:202 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:12120 (11.8 KiB) TX bytes:846 (846.0 B)
Memory:fbe60000-fbe80000
xenbr0 Link encap:Ethernet HWaddr 00:14:4f:ca:47:b8
inet addr:10.10.10.145 Bcast:0.0.0.0 Mask:255.255.255.240
inet6 addr: fe80::214:4fff:feca:47b8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6084 errors:0 dropped:0 overruns:0 frame:0
TX packets:6401 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:482561 (471.2 KiB) TX bytes:3436112 (3.2 MiB)
xenbr1 Link encap:Ethernet HWaddr 00:14:4f:ca:47:b9
inet addr:192.168.10.10 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::214:4fff:feca:47b9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:468 (468.0 B)
And when i want to run a virtual machine, it halts when it''s booting
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
and it doesn''t continue! Has anyone have any idea of what am I doing
wrong?
Thank you!
--
Martin Aceto
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users