Riccardo
2009-Oct-16 20:49 UTC
[Xen-users] xensource-2.6.29-xen-r4 and 2.6.31 IRQ 17 e1000
Hi, I compiled xen-sources in my gentoo from: http://code.google.com/p/gentoo-xen-kernel/downloads/list but with e1000 as module or builtin when the system setup the ip automatically on boot or manually the system freeze with "Disabling IRQ 17" I try the e1000e driver and the igb driver from Intel, but doesn''t support my integrated lan: 06:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) For boot I must disable AHCI in the BIOS, with AHCI the kernel doesn''t recognized the hard drives. (The AHCI is already buildin in the kernel). Any suggestions for boot one xen kernel in my gentoo? Best regards, Riccardo _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Andrew Lyon
2009-Oct-17 12:05 UTC
Re: [Xen-users] xensource-2.6.29-xen-r4 and 2.6.31 IRQ 17 e1000
On Fri, Oct 16, 2009 at 9:49 PM, Riccardo <andrighetto.riccardo@gmail.com> wrote:> Hi, > I compiled xen-sources in my gentoo from: > http://code.google.com/p/gentoo-xen-kernel/downloads/list > but with e1000 as module or builtin when the system setup the ip > automatically on boot or manually the system freeze with "Disabling IRQ 17" > > I try the e1000e driver and the igb driver from Intel, but doesn''t support > my integrated lan: > 06:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet > Controller (Copper) (rev 03)Thats strange, I could expect the e1000e driver to work with that card, according to http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2196&DwnldID=9180&lang=eng that is the correct driver, but other users have reported problems with 2.5.29 http://www.linuxcompatible.org/Intel_82573E82573V_Gigabit_Ethernet_Controller_c12681.html :( Unfortunately I dont have any system I can test e1000 on with Xen, all of my Xen servers have 82575EB or 82566DM-2.> > For boot I must disable AHCI in the BIOS, with AHCI the kernel doesn''t > recognized the hard drives. (The AHCI is already buildin in the kernel).What sata controller do you have? Andy> > Any suggestions for boot one xen kernel in my gentoo?2.6.29-xen-r4 is probably the best one to use right now, .31 is very new and I''ve already had some problems with it. Perhaps you migjht be better of trying pv_ops kernel, if it supports the features you need. Andy> > Best regards, > > Riccardo > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Riccardo
2009-Oct-17 12:40 UTC
Re: [Xen-users] xensource-2.6.29-xen-r4 and 2.6.31 IRQ 17 e1000
Hi, thank for your support. ---------- Original Message ----------- From: Andrew Lyon <andrew.lyon@gmail.com> To: Riccardo <andrighetto.riccardo@gmail.com> Cc: xen-users@lists.xensource.com Sent: Sat, 17 Oct 2009 13:05:29 +0100 Subject: Re: [Xen-users] xensource-2.6.29-xen-r4 and 2.6.31 IRQ 17 e1000> On Fri, Oct 16, 2009 at 9:49 PM, Riccardo > <andrighetto.riccardo@gmail.com> wrote: > > Hi, > > I compiled xen-sources in my gentoo from: > > http://code.google.com/p/gentoo-xen-kernel/downloads/list > > but with e1000 as module or builtin when the system setup the ip > > automatically on boot or manually the system freeze with "Disabling IRQ 17" > > > > I try the e1000e driver and the igb driver from Intel, but doesn''t support > > my integrated lan: > > 06:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet > > Controller (Copper) (rev 03) > > Thats strange, I could expect the e1000e driver to work with that > card, according to > http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2196&DwnldID=9180&lang=eng > that is the correct driver, but other users have reported problems > with 2.5.29 http://www.linuxcompatible.org/Intel_82573E82573V_Gigabit_Ethernet_Controller_c12681.html > :( > > Unfortunately I dont have any system I can test e1000 on with Xen, all > of my Xen servers have 82575EB or 82566DM-2.I already try e1000e but there is the same error when init ethernet device Disabling IRQ 17 and system freeze damn :( In all two kernel 2.6.29 and 2.6.31 there is the same bug! The only way to complete boot the system is to disable ethernet init or compile the kernel without any intel ethernet driver ;(> > > > For boot I must disable AHCI in the BIOS, with AHCI the kernel doesn''t > > recognized the hard drives. (The AHCI is already buildin in the kernel). > > What sata controller do you have?My lspci (BIOS is setup in IDE mode): 00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 06:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) 06:00.3 Serial controller: Intel Corporation Active Management Technology - SOL (rev 03) 06:00.4 IPMI SMIC interface: Intel Corporation 82573E KCS (Active Management) (rev 03) 07:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 07:05.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05)> Andy > > > > Any suggestions for boot one xen kernel in my gentoo? > > 2.6.29-xen-r4 is probably the best one to use right now, .31 is very > new and I''ve already had some problems with it. > > Perhaps you migjht be better of trying pv_ops kernel, if it supports > the features you need. > > Andy > > > > > Best regards, > > > > Riccardo > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > >------- End of Original Message ------- _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users