Hi,
I''m using Xen 3.2.1 with 2.6.26 as Dom0 and DomU in the x86_64
Versions/Builds as provided by Debian Lenny.
I noticed that when using "jiffies" as clocksource, the resolution of
the timers in a DomU is 4ms, e.g. ping shows only runtimes in 4ms
increments [1]. When using "xen" the resolution is fine
(didn''t make
exact measurements) but xen is a no-go when migrating guests between Dom0s.
Is the 4ms resolution behavior expected or something specific to the
Debian builds? Is there anything I can do to change the behavior?
Versions used:
xen-hypervisor-3.2-1-amd64 3.2.1-2
linux-image-2.6.26-2-xen-amd64 2.6.26-17lenny2
Relevant log messages:
xen:
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ENABLING IO-APIC IRQs
(XEN) Platform timer overflows in 14998 jiffies.
(XEN) Platform timer is 14.318MHz HPET
dom0
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 0, version 0, address 0xfec80000, GSI
24-47
[ 0.572038] Calibrating delay using timer specific routine.. 4801.61
BogoMIPS (lpj=9603225)
domU
[ 0.968064] Calibrating delay using timer specific routine.. 4801.91
BogoMIPS (lpj=9603828)
best regards,
Michael Renner
[1]
64 bytes from www.example.com (208.77.188.166): icmp_seq=4 ttl=51
time=172 ms
64 bytes from www.example.com (208.77.188.166): icmp_seq=5 ttl=51
time=168 ms
64 bytes from www.example.com (208.77.188.166): icmp_seq=6 ttl=51
time=176 ms
64 bytes from www.example.com (208.77.188.166): icmp_seq=7 ttl=51
time=172 ms
--
Geizhals(R) - Preisvergleich
Preisvergleich Internet Services AG
Obere Donaustrasse 63/2
A-1020 Wien
Tel: +43 1 5811609/87
Fax: +43 1 5811609/55
Handelsgericht Wien | FN 197241K | Firmensitz Wien
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
