Thanks for the response.
On Wed, Aug 12, 2009 at 3:36 PM, James Harper
<james.harper@bendigoit.com.au> wrote:
> > Hello everybody!
> >
> > Do you know how to pass physical LPT port to the DomU?
> >
> > I found some information about ioports=[''''] but it
seems it works only
> if the
> > port range is the same on the host and VM. My motheboard
hasn''t any
> LPT so I
> > use PCI board. Using such board lead to different IO range.
> >
> > 05:01.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O
> > Controller (rev 01)
> > Subsystem: LSI Logic / Symbios Logic Device 0014
> > Flags: medium devsel, IRQ 22
> > I/O ports at ec00 [size=8]
> > I/O ports at e880 [size=8]
> > I/O ports at e800 [size=8]
> > I/O ports at e480 [size=8]
> > I/O ports at e400 [size=8]
> > I/O ports at e080 [size=16]
> >
> > Does anybody know how to tell Xen using e080 host io for the 03bc vm
> io
>
> I guess you can''t just pass the whole pci device through as you
only
> want a single port right?
Yep, the single port
>
>
> The problem is that the i/o ports are only supposed to be touched by the
> driver attached to the device, which isn''t going to work (and
indeed the
> ports could be remapped etc as other devices are added and removed).
>
> Can you use a USB to LPT adapter and just pass through the usb device
> and make the DomU HVM?
Unfortunately, it''s a problem because the software I''m using
(an IC
programmator) uses plain IO access via directio on windows host. So it
won''t
work
>
>
> Failing that, you should still be able to just pass through the i/o
> ports 1:1 and tell the guest operating system (Linux?) to probe an lpt
> port at the specified address (modinfo parport_pc to find the
> parameters), which should work assuming the I/O ports are actually
> compatible, although is certainly not recommended for reasons already
> discussed.
>
I tried to configure LPT port on windows but it refuses to accept
non-standard IO range (only 278, etc are acceptable). I''m digging the
problem but without success
>
> James
>
Some time ago I used vmware and there was a LPT emulaton via /dev/parport.
To the guest it was like plain LPT and vmware used /dev/parport to
communicate.
Maybe Is there something like this? Communication via LPT is very simpe.
Can qemu help somehow to emulate guest LPT from the host?
I''ve been using Xen for few years and I don''t want to switch
to another
software becasue of the problem.
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users