Hi all, I want to play around with the network card and to manually send ethernet,e.g. pause, frames. Let''s say first in dom0. For this, I tried to find out which driver is used and I couldn''t find anything. In dmesg I see that e1000e and igb are loaded when the kernel detects the ethernet cards. Then, Xen renames and rearranges all to pethX. When I run lsmod no network driver is loaded: $ lsmod Module Size Used by binfmt_misc 17036 1 bridge 62384 0 ppdev 13704 0 container 9216 0 button 11936 0 sbs 21184 0 i2c_ec 9984 1 sbs i2c_core 27136 1 i2c_ec video 22152 0 battery 15112 0 iptable_filter 7552 0 ip_tables 25304 1 iptable_filter x_tables 21512 1 ip_tables ac 10120 0 parport_pc 32792 0 lp 18352 0 parport 44556 3 ppdev,parport_pc,lp tsdev 12800 0 serio_raw 11908 0 ext3 137744 1 jbd 65488 1 ext3 usbhid 53776 0 usb_storage 79776 0 ehci_hcd 36488 0 uhci_hcd 28816 0 usbcore 139432 5 usbhid,usb_storage,ehci_hcd,uhci_hcd thermal 19984 0 processor 43820 1 thermal fan 9736 0 fuse 48944 1 With $xm dmesg I couldn''t find anything neither. In /proc/modules there is nothing neither. In /sys/class/net/pethX should be a link to the used driver, right? But there is nothing. I guess that Xen moves the networking part within the hypervisor and thus I cannot find any information. Is that correct? How can I find out the used drivers? While it might not be important, I use xen bridges (not the routing approach). Any help is appreciated, Elli ________________________________________________________________ Neu: WEB.DE Doppel-FLAT mit Internet-Flatrate + Telefon-Flatrate für nur 19,99 Euro/mtl.!* http://produkte.web.de/go/02/ _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users