I''m playing around with a test server, install Xen on a Centos 5 box. http://www.howtoforge.org/paravirtua...tos-5.3-x86_64 <http://www.howtoforge.org/paravirtualization-with-xen-on-centos-5.3-x86_64> I''ve tried two methods to create a vm. virt-install and virt-install -x "ip=xxx.xxx.70.212 gateway=xxx.xxx.70.211 subnet=255.255.255.248" If I do virt-install, it asks me this: (first screenshot). I have no idea what to put it. I did try this: IPv4 address: xxx.xxx.70.212__ / 255.255.255.248_ Gateway: xxx.xxx.70.211___________________________ Name Server: _________________________________________ note: only here in my post am I actually putting "xxx" in the IP for privacy reasons only. The 70.212 is the main server IP that I ssh into. See 2nd screenshot for error. Same thing with various valid mirrors I tried. This is my ifcfg-eth0 info: DEVICE=eth0 BOOTPROTO=static IPADDR=xxx.xxx.70.212 NETMASK=255.255.255.248 GATEWAY=xxx.xxx.70.211 http://i40.tinypic.com/2m5c8ys.png http://i40.tinypic.com/64fqyh.png _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
I''m playing around with a test server, install Xen on a Centos 5 box. http://www.howtoforge.org/paravirtua...tos-5.3-x86_64 <http://www.howtoforge.org/paravirtualization-with-xen-on-centos-5.3-x86_64> I''ve tried two methods to create a vm. virt-install and virt-install -x "ip=xxx.xxx.70.212 gateway=xxx.xxx.70.211 subnet=255.255.255.248" If I do virt-install, it asks me this: (first screenshot). I have no idea what to put it. I did try this: IPv4 address: xxx.xxx.70.212__ / 255.255.255.248_ Gateway: xxx.xxx.70.211___________________________ Name Server: _________________________________________ note: only here in my post am I actually putting "xxx" in the IP for privacy reasons only. The 70.212 is the main server IP that I ssh into. See 2nd screenshot for error. Same thing with various valid mirrors I tried. This is my ifcfg-eth0 info: DEVICE=eth0 BOOTPROTO=static IPADDR=xxx.xxx.70.212 NETMASK=255.255.255.248 GATEWAY=xxx.xxx.70.211 http://i40.tinypic.com/2m5c8ys.png http://i40.tinypic.com/64fqyh.png _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
I''m playing around with a test server, install Xen on a Centos 5 box. http://www.howtoforge.org/paravirtua...tos-5.3-x86_64 <http://www.howtoforge.org/paravirtualization-with-xen-on-centos-5.3-x86_64> I''ve tried two methods to create a vm. virt-install and virt-install -x "ip=xxx.xxx.70.212 gateway=xxx.xxx.70.211 subnet=255.255.255.248" If I do virt-install, it asks me this: (first screenshot). I have no idea what to put it. I did try this: IPv4 address: xxx.xxx.70.212__ / 255.255.255.248_ Gateway: xxx.xxx.70.211___________________________ Name Server: _________________________________________ note: only here in my post am I actually putting "xxx" in the IP for privacy reasons only. The 70.212 is the main server IP that I ssh into. See 2nd screenshot for error. Same thing with various valid mirrors I tried. This is my ifcfg-eth0 info: DEVICE=eth0 BOOTPROTO=static IPADDR=xxx.xxx.70.212 NETMASK=255.255.255.248 GATEWAY=xxx.xxx.70.211 http://i40.tinypic.com/2m5c8ys.png http://i40.tinypic.com/64fqyh.png _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users