Johnny Bravo
2009-Mar-11 22:04 UTC
[Xen-users] network-route problem, maybe over GPLPV driver
Hello to all! please help at least on third time
My situation:
I have Suse 11.1 64bit dom0 and 4 hvm domu: 2 - windows 2008 with full
gplpv drivers installed (0.9.12-pre13) and 2 - debian lenny 32 bit (if
u know how to make normal shutdown for lenny domu via xm shutdown
please let me know :) )
network config - network-bridge, vif-bridge
Everything was great with bridging config but I decide to move to
network-route/vif-route config and here comes my problem: all lenny
domu become unrechable, all pings telnets sshs finishs by Destination
unreachable
ifconfig in dom0 shows me it:
debvl Link encap:EthernetHWaddr FE:FF:FF:FF:FF:FF
inet addr:80.45.22.55Bcast:80.255.255.255Mask:255.255.255.255
UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:795 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b)TX bytes:0 (0.0 b)
so all packets drops, if I ping from domu (lenny) I have the same
Destination unreachable but RX/TX counters in dom0 stay zero
with other domu - windows 2008 with GPLPV drivers everything is ok, I
can access from/to them
I try to reinstall lenny-domu, add new ones, add windows one without
gplpv driver - same situation - Destination unreachable, now I will
try to install gplpv driver to new windows domu - i think it will
help, but what i should to do with lenny-domu?
hvm config for all domu is the same, exept vif parametrs and disk modes:
import os, re
arch = os.uname()[4]
if re.search(''64'', arch):
arch_libdir = ''lib64''
else:
arch_libdir = ''lib''
kernel = ''/usr/lib/xen/boot/hvmloader''
builder=''hvm''
device_model = ''/usr/'' + arch_libdir +
''/xen/bin/qemu-dm''
name = ''blabla''
memory = 2048
maxmem = 2048
vcpus=2
acpi=1
usb=1
#usbdevice=''host:0529:0001'' - :) if u know how to transfer
alladin
dongle to hvm domu please let me know, cose this one doesnot
work :)
usbdevice=''tablet''
apic=1
shadow_memory=16
vif=[''ip=192.168.200.3,mac=00:16:3e:74:47:b6,vifname=Dtbin'']
disk = [''phy:/dev/virtpart2/hdd1,hda,w'']
boot=''c''
sdl=0
vnc=1
vncviewer=1
vncdisplay=2
localtime=''yes''
stdvga=0
serial=''pty''
#ne2000=0
on_poweroff=''destroy''
on_reboot=''restart''
on_crash=''restart''
on_xend_start=''start''
on_xend_stop=''shutdown''
PS Sorry for my english :)
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Johnny Bravo
2009-Mar-12 13:48 UTC
Re: [Xen-users] network-route problem, maybe over GPLPV driver
as i thought, new windows hvm domu with gplpv drivers works, but where i could find such drivers for linux?> Hello to all! please help at least on third time > > My situation: > I have Suse 11.1 64bit dom0 and 4 hvm domu: 2 - windows 2008 with > full gplpv drivers installed (0.9.12-pre13) and 2 - debian lenny 32 > bit (if u know how to make normal shutdown for lenny domu via xm > shutdown please let me know :) ) > network config - network-bridge, vif-bridge > Everything was great with bridging config but I decide to move to > network-route/vif-route config and here comes my problem: all lenny > domu become unrechable, all pings telnets sshs finishs by > Destination unreachable > ifconfig in dom0 shows me it: > > debvl Link encap:EthernetHWaddr FE:FF:FF:FF:FF:FF > inet addr:80.45.22.55Bcast:80.255.255.255Mask:255.255.255.255 > UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:795 overruns:0 carrier:0 > collisions:0 txqueuelen:32 > RX bytes:0 (0.0 b)TX bytes:0 (0.0 b) > > so all packets drops, if I ping from domu (lenny) I have the same > Destination unreachable but RX/TX counters in dom0 stay zero > with other domu - windows 2008 with GPLPV drivers everything is ok, > I can access from/to them > I try to reinstall lenny-domu, add new ones, add windows one without > gplpv driver - same situation - Destination unreachable, now I will > try to install gplpv driver to new windows domu - i think it will > help, but what i should to do with lenny-domu? > > hvm config for all domu is the same, exept vif parametrs and disk > modes: > > import os, re > arch = os.uname()[4] > if re.search(''64'', arch): > arch_libdir = ''lib64'' > else: > arch_libdir = ''lib'' > kernel = ''/usr/lib/xen/boot/hvmloader'' > builder=''hvm'' > device_model = ''/usr/'' + arch_libdir + ''/xen/bin/qemu-dm'' > name = ''blabla'' > memory = 2048 > maxmem = 2048 > vcpus=2 > acpi=1 > usb=1 > #usbdevice=''host:0529:0001'' - :) if u know how to transfer > alladin dongle to hvm domu please let me know, cose this one doesnot > work :) > usbdevice=''tablet'' > apic=1 > shadow_memory=16 > vif=[''ip=192.168.200.3,mac=00:16:3e:74:47:b6,vifname=Dtbin''] > disk = [''phy:/dev/virtpart2/hdd1,hda,w''] > boot=''c'' > sdl=0 > vnc=1 > vncviewer=1 > vncdisplay=2 > localtime=''yes'' > stdvga=0 > serial=''pty'' > #ne2000=0 > on_poweroff=''destroy'' > on_reboot=''restart'' > on_crash=''restart'' > on_xend_start=''start'' > on_xend_stop=''shutdown'' > > > PS Sorry for my english :) > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Vladislav Karpenko
2009-Mar-17 21:28 UTC
[Xen-users] network-route problem, maybe over GPLPV driver
Hellol!
I wrote 3 days ago from another email but no ones answer, may be it
from spam filter (also it could be that no ones wants to) so last try:
please help at least now
My situation:
I have Suse 11.1 64bit dom0 and 4 hvm domu: 2 - windows 2008 with full
gplpv drivers (from James Harper) installed (0.9.12-pre13) and 2 -
debian lenny 32 bit (if u know how to make normal shutdown for lenny
domu via xm shutdown please let me know :) )
network config - network-bridge, vif-bridge
Everything was great with bridging config but I decide to move to
network-route/vif-route config and here comes my problem: all lenny
domu become unrechable by network, all pings telnets sshs finishs by
"Destination unreachable"
ifconfig in dom0 for DomU(lenny) vif shows me it:
debvl Link encap:EthernetHWaddr FE:FF:FF:FF:FF:FF
inet addr:192.168.200.100Bcast:80.255.255.255Mask:255.255.255.255
UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:795 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b)TX bytes:0 (0.0 b)
so all packets drops, if I ping from domu (lenny) I have the same
Destination unreachable but RX/TX counters for its vif in dom0 stay zero
with other domu - windows 2008 with GPLPV drivers everything is ok, I
can access from/to them
I try to reinstall HVM lenny-domu, install HVM suse11.1, install
windows 2008 without gplpv driver - same situation - Destination
unreachable, but if I install gplpv driver to new windows domu -
network start working.
So whats wrong with other domu without gplpv drivers, why their
network doesnot work in vif-route mode without PV drivers and works in
vif-bridge mode?
hvm config for all domu is the same, exept vif parametrs and disk modes:
import os, re
arch = os.uname()[4]
if re.search(''64'', arch):
arch_libdir = ''lib64''
else:
arch_libdir = ''lib''
kernel = ''/usr/lib/xen/boot/hvmloader''
builder=''hvm''
device_model = ''/usr/'' + arch_libdir +
''/xen/bin/qemu-dm''
name = ''blabla''
memory = 2048
maxmem = 2048
vcpus=2
acpi=1
usb=1
#usbdevice=''host:0529:0001'' - :) if u know how to transfer
alladin
dongle to hvm domu please let me know, cose this one doesnot
work :)
usbdevice=''tablet''
apic=1
shadow_memory=16
vif=[''ip=192.168.200.100,mac=00:16:3e:74:47:b6,vifname=Dtbin'']
disk = [''phy:/dev/virtpart2/hdd1,hda,w'']
boot=''c''
sdl=0
vnc=1
vncviewer=1
vncdisplay=2
localtime=''yes''
stdvga=0
serial=''pty''
#ne2000=0
on_poweroff=''destroy''
on_reboot=''restart''
on_crash=''restart''
on_xend_start=''start''
on_xend_stop=''shutdown''
PS Sorry for my english :)
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Vladislav Karpenko
2009-Mar-18 11:14 UTC
[Xen-users] network-route problem, maybe over GPLPV driver
the only difference that I found is in send.log
INFO (XendDomainInfo:1932) createDevice: vif : {''uuid'':
''8d56a4d0-54b1-
e826-fb22-729f7becb449'', ''script'':
''/etc/xen/scripts/vif-route'', ''ip'':
''192.168.200.3'', ''mac'':
''00:1..........sciped
DEBUG (DevController:122) DevController: writing
{''backend-id'': ''0'',
''mac'': ''00:16:3e:74:47:b6'',
''handle'': ''0'', ''state'':
''1'', ''backend'': ''/
local/domain/0/backend/vif/4/0''}........sciped
DEBUG (DevController:124) DevController: writing {''domain'':
''Database'', ''handle'': ''0'',
''uuid'': ''8d56a4d0-54b1-e826-
fb22-729f7becb449'', ''script'':
''/etc/xen/scripts/vif-rout.........sciped
for linux domu second line doesnot contain mac entry
and befor first and last strings didnt contains ''script'':
''/etc/xen/
scripts/vif-route'' but i add it to domu config file:
vif=[''ip=192.168.200.2,mac=00:16:3e:32:7b:a1,vifname=debvl,script=/etc/
xen/scripts/vif-route'']
and it apears in log
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users