akhilesh kumar
2008-Dec-10 12:10 UTC
[Xen-users] not able to get my hard coded(static) ip address on Dom U
Hi All,
I am working on xen virtual network interface
My Dom0 and DomU is up and working fine.
With manual ip address network on DonU is working fine.
Example
#ifconfig
# uname -r
2.6.18.8-xenU
# ifconfig eth0 107.108.161.190 netmask 255.255.255.0
# ifconfig lo 127.0.0.1 netmask 255.255.255.0
# ping 107.108.161.116
PING 107.108.161.116 (107.108.161.116): 56 data bytes
64 bytes from 107.108.161.116: seq=0 ttl=64 time=18.735 ms
64 bytes from 107.108.161.116: seq=1 ttl=64 time=0.229 ms
[3] + Stopped ping 107.108.161.116
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:3E:7D:29:0B
inet addr:107.108.161.190 Bcast:107.108.161.255 Mask:
255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:75349 errors:0 dropped:0 overruns:0 frame:0
TX packets:103 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22187579 (21.1 MiB) TX bytes:9989 (9.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.255.255.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
#
*But I am not able to get my hard coded(static) ip address on Dom U*
*I have updated network configuration in my DomU config file*
Vif =[''ip=107.108.161.190, vifname=veth0'' ]
Don 0 etc/network/interface file
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.255.255.0
auto eth0 eth0:0
iface eth0 inet static
address 107.108.161.116
netmask 255.255.255.0
gateway 107.108.161.1
# pre-up /etc/init.d/xend start || true
# up /usr/sbin/xen-net-setup.sh start
# post-down /usr/local/sbin/xen-net-setup.sh stop
iface veth0:0 inet static
address 107.108.161.190
netmask 255.255.255.0
my ifcfg-eth0 for domU.
TYPE=Ethernet
DEVICE=eth0
BOOTPROTO=static
BROADCAST=107.108.161.255
IPADDR=107.108.161.190
NETMASK=255.255.255.0
NETWORK= 107.108.161.0
GATEWAY=107.108.161.1
Can any one help
*How I can get (static) ip address on Dom U*
**
*Thanks,*
*Akhilesh*
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Simon Hobson
2008-Dec-10 12:41 UTC
Re: [Xen-users] not able to get my hard coded(static) ip address on Dom U
First off, if you want help. don''t go out of your way to annoy those
you are requesting help from ! Set your client to text only so that
it posts :
address 107.108.161.190
rather than :
address <http://107.108.161.190>107.108.161.190
akhilesh kumar wrote:
>But I am not able to get my hard coded(static) ip address on Dom U
>
>I have updated network configuration in my DomU config file
>
>
>
>Vif =[''ip=107.108.161.190, vifname=veth0'' ]
>
>
>
> Don 0 etc/network/interface file
>
>auto lo
>
>iface lo inet loopback
>
> address 127.0.0.1
>
> netmask 255.255.255.0
>
>
>
>auto eth0 eth0:0
>
>
>
>iface eth0 inet static
>
> address 107.108.161.116
>
> netmask 255.255.255.0
>
> gateway 107.108.161.1
>
># pre-up /etc/init.d/xend start || true
>
># up /usr/sbin/xen-net-setup.sh start
>
># post-down /usr/local/sbin/xen-net-setup.sh stop
>
>
>
>iface veth0:0 inet static
>
> address 107.108.161.190
^^^^^^^
>
> netmask 255.255.255.0
>
>
>
>my ifcfg-eth0 for domU.
>
>TYPE=Ethernet
>DEVICE=eth0
>BOOTPROTO=static
>
>BROADCAST=107.108.161.255
>IPADDR=107.108.161.190
^^^^^^^^^^^^^^^^
>NETMASK=255.255.255.0
>NETWORK= 107.108.161.0
>GATEWAY=107.108.161.1
>
>
>
>Can any one help
You could try not assigning the same address to two different machines !
--
Simon Hobson
Visit http://www.magpiesnestpublishing.co.uk/ for books by acclaimed
author Gladys Hobson. Novels - poetry - short stories - ideal as
Christmas stocking fillers. Some available as e-books.
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users