math_physics@163.com
2008-Dec-05 01:56 UTC
[Xen-users] xen-3.0-x86_32 not supported by xen kernel
I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU with the kernel, it gives me error message: Error: (2, ''Invalid kernel'', ''xc_dom_compat_check: guest type xen-3.0-x86_32 not supported by xen kernel, sorry\n'') Can someone give me any suggestion about this problem? Thank you! Joe _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Nick Couchman
2008-Dec-05 21:20 UTC
Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
Use xm info to figure out which kernels are supported - I suggest trying a 32-bit PAE kernel - my SLES10 64-bit Linux builds don't support plain 32-bit kernels, but they do support 32-bit PAE (big/huge) kernels. -Nick -----Original Message----- From: math_physics@163.com To: Xen MailList <xen-users@lists.xensource.com> Subject: [Xen-users] xen-3.0-x86_32 not supported by xen kernel Date: Fri, 5 Dec 2008 09:56:45 +0800 (CST) I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU with the kernel, it gives me error message: Error: (2, 'Invalid kernel', 'xc_dom_compat_check: guest type xen-3.0-x86_32 not supported by xen kernel, sorry\n') Can someone give me any suggestion about this problem? Thank you! Joe ________________________________________________________________________ 网易免费邮，全球最大的中文免费邮箱 This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Nick Couchman
2008-Dec-06 04:47 UTC
Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
The kernel version doesn't matter so much as the Xen version in the kernel as well as the type of kernel. Try installing a bigmem or hugemem Xen kernel as those should include PAE support and see if that helps. Nick Couchman Manager, Information Technology -----Original Message----- From: <math_physics@163.com> To: Nick Couchman <Nick.Couchman@seakr.com> Sent: 12/5/2008 8:38:21 PM Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel Hi, Nick: Should the kernel version of Dom0 be the same with the kernel version of DomU? I install xen packages on my RHEL AS 5.1 using rpm package, but I can't find xenU kernel. I only found kernel files whose name include string 'xen' only. So I built a xenU kernel (2.6.16). Then I boot xenU kernel in RHEL AS 5.1, and it gives me the error messege. Thank you ! -----原始邮件----- 发件人: "Nick Couchman" <Nick.Couchman@seakr.com> 发送时间: 2008年12月6日 星期六 收件人: math_physics@163.com 抄送: xen-users@lists.xensource.com 主题: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel Use xm info to figure out which kernels are supported - I suggest trying a 32-bit PAE kernel - my SLES10 64-bit Linux builds don't support plain 32-bit kernels, but they do support 32-bit PAE (big/huge) kernels. -Nick -----Original Message----- From: math_physics@163.com To: Xen MailList <xen-users@lists.xensource.com> Subject: [Xen-users] xen-3.0-x86_32 not supported by xen kernel Date: Fri, 5 Dec 2008 09:56:45 +0800 (CST) I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU with the kernel, it gives me error message: Error: (2, 'Invalid kernel', 'xc_dom_compat_check: guest type xen-3.0-x86_32 not supported by xen kernel, sorry\n') Can someone give me any suggestion about this problem? Thank you! Joe 网易免费邮，全球最大的中文免费邮箱 This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR. This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
One of my virtual para-virtualized machines has no eth0. Where is it defined in the virtual disk? The machine definition file is correct, it has valid configuration for device vif. I need to understand how to fix this when it happens. if I type service network restart, it says device eth0 does not seem to be present, delaying initialization also of I type ifconfig eth0 it says: eth0: error fetching interface information: Device not found if delete the virtual machine and rebuild it, it does not get fixed, so the problem is inside the virtual disk. I use a Suse 10 SP2 as host and Centos 5.2 64 bits as Guest. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
math_physics@163.com
2008-Dec-09 03:14 UTC
Re: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
Yes, I have editted the fstab file in /mnt/loop1/etc. Its content is modified to: /dev/sda9 / other parameters /dev/sda8 swap other parameters -----Original message----- From: "Nick Couchman" <Nick.Couchman@seakr.com> Date: Dec. 9, 2008, Tu. To:math_physics@163.com Copy to: Subject: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel Did you edit the fstab file in /mnt/loop1/etc with the new root information? -Nick>>> <math_physics@163.com> 2008/12/07 06:48 >>>Hi, Nick: Thank you so much for you help! But I still can''t solve my problem:(. I still need help:) I post my DomU configure file and booting messge here. Would you help me find out the answer? The kernal and the ramdisk file I use are installed by rpm package in the RHEL AS5.1 installation disk. And here is what I do: 1. I create a image file /home1/rh9/rh9.img and mount it to /mnt/loop1. 2. Copy the whole rh9 system(a physical linux system installed in /dev/sda5) into /mnt/loop1; 3. Copy the directory /lib/modules/2.6.18-53.el5xen of my RHEL AS5.1 (on /dev/sda1) into /mnt/loop1/lib/modules; 4. Modify /mnt/loop1/etc/fstab, where mount points are fixed to match the settings of DomU configuration file. Thank you so much! ############ DomU configuration file: kernel = "/boot/vmlinuz-2.6.18-53.el5xen" ramdisk ="/boot/initrd-2.6.18-53.el5xen.img" memory = 1024 name = "rh9" disk = [''file:/home1/rh9/rh9.img,sda9,w'',''file:/home1/rh9/rh9_swap.img,sda8,w''] root = "/dev/sda9 ro" ############## Booting message: Started domain rh9 Linux version 2.6.18-53.el5xen (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) 304MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 264192 Kernel command line: root=/dev/sda9 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0727000 soft=c0707000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1662.499 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 1026984k/1056768k available (2049k kernel code, 20692k reserved, 844k data, 168k init, 311304k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4158.11 BogoMIPS (lpj=8316221) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Checking ''hlt'' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 5216k freed Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1228655943.467:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key FF48355AC6B12D27 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Linux version 2.6.18-53.el5xen (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) 304MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 264192 Kernel command line: root=/dev/sda9 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0727000 soft=c0707000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1662.499 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 1026984k/1056768k available (2049k kernel code, 20692k reserved, 844k data, 168k init, 311304k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4158.11 BogoMIPS (lpj=8316221) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Checking ''hlt'' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 5216k freed Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1228655943.467:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key FF48355AC6B12D27 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/2057 XENBUS: Device with no driver: device/vbd/2056 Freeing unused kernel memory: 168k freed Write protecting the kernel read-only data: 360k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 Loading ohci-hcd.ko module Loading ehci-hcd.ko module Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading libata.ko module Loading ahci.ko module Loading ata_piix.ko module Waiting for driver initialization. Scanning and configuring dmraid supported devices Creating root device. Mounting root filesystem. mount: could not find filesystem ''/dev/root'' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Kernel panic - not syncing: Attempted to kill init! ############## xm info gives the following message release : 2.6.18-53.el5xen version : #1 SMP Wed Oct 10 17:06:12 EDT 2007 machine : i686 nr_cpus : 2 nr_nodes : 1 sockets_per_node : 1 cores_per_socket : 2 threads_per_core : 1 cpu_mhz : 1662 hw_caps : bfebfbff:20100000:00000000:00000140:0000e39d:00000000:00000001 total_memory : 2046 free_memory : 1508 xen_major : 3 xen_minor : 1 xen_extra : .0-53.el5 xen_caps : xen-3.0-x86_32p xen_pagesize : 4096 platform_params : virt_start=0xf5800000 xen_changeset : unavailable cc_compiler : gcc version 4.1.2 20070626 (Red Hat 4.1.2-14) cc_compile_by : brewbuilder cc_compile_domain : build.redhat.com cc_compile_date : Wed Oct 10 16:30:55 EDT 2007 xend_config_format : 2 ?> -----Original message-----> From: "Nick Couchman" <Nick.Couchman@seakr.com> > Date: Dec 6, 2008, Sat. > To: math_physics@163.com > Copy to: xen-users@lists.xensource.com > Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel > > The kernel version doesn''t matter so much as the Xen version in the > kernel as well as the type of kernel. Try installing a bigmem or > hugemem Xen kernel as those should include PAE support and see if that > helps. > Nick Couchman > Manager, Information Technology > -----Original Message----- > From: <math_physics@163.com> > To: Nick Couchman <Nick.Couchman@seakr.com> > > Sent: 12/5/2008 8:38:21 PM > Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel > > Hi, Nick: > > Should the kernel version of Dom0 be the same with the kernel version of > DomU? > > I install xen packages on my RHEL AS 5.1 using rpm package, but I can''t > find xenU kernel. I only found kernel files whose name include string > ''xen'' only. So I built a xenU kernel (2.6.16). > > Then I boot xenU kernel in RHEL AS 5.1, and it gives me the error > messege. > > > Thank you ! > > > > > -----Original message----- > From: "Nick Couchman" <Nick.Couchman@seakr.com> > Date: Dec 6, 2008, Sat. > To: math_physics@163.com > Copy: xen-users@lists.xensource.com > Subject: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel > > Use xm info to figure out which kernels are supported - I suggest trying > a 32-bit PAE kernel - my SLES10 64-bit Linux builds don''t support plain > 32-bit kernels, but they do support 32-bit PAE (big/huge) kernels. > > -Nick > > > -----Original Message----- > From: math_physics@163.com > To: Xen MailList <xen-users@lists.xensource.com> > Subject: [Xen-users] xen-3.0-x86_32 not supported by xen kernel > Date: Fri, 5 Dec 2008 09:56:45 +0800 (CST) > > > I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU > with the kernel, it gives me error message: > > Error: (2, ''Invalid kernel'', ''xc_dom_compat_check: guest type > xen-3.0-x86_32 not supported by xen kernel, sorry\n'') > > > Can someone give me any suggestion about this problem? > > Thank you! > > Joe > > > >> > This e-mail may contain confidential and privileged material for the > sole use of the intended recipient. If this email is not intended for > you, or you are not responsible for the delivery of this message to the > intended recipient, please note that this message may contain SEAKR > Engineering (SEAKR) Privileged/Proprietary Information. In such a case, > you are strictly prohibited from downloading, photocopying, distributing > or otherwise using this message, its contents or attachments in any way. > If you have received this message in error, please notify us immediately > by replying to this e-mail and delete the message from your mailbox. > Information contained in this message that does not relate to the > business of SEAKR is neither endorsed by nor attributable to SEAKR. > > > This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR.This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Nick Couchman
2008-Dec-09 22:48 UTC
Re: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xenkernel
You probably need to rebuild the initrd image used to boot so that it has the xenblk driver included. The following messages indicate that the xenblk driver isn't loading: XENBUS: Device with no driver: device/vbd/2057 XENBUS: Device with no driver: device/vbd/2056 -Nick>>> <math_physics@163.com> 2008/12/08 20:14 >>>Yes, I have editted the fstab file in /mnt/loop1/etc. Its content is modified to: /dev/sda9 / other parameters /dev/sda8 swap other parameters -----Original message----- From: "Nick Couchman" <Nick.Couchman@seakr.com> Date: Dec. 9, 2008, Tu. To: math_physics@163.com Copy to: Subject: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel Did you edit the fstab file in /mnt/loop1/etc with the new root information? -Nick>>> <math_physics@163.com> 2008/12/07 06:48 >>>Hi, Nick: Thank you so much for you help! But I still can't solve my problem:(. I still need help:) I post my DomU configure file and booting messge here. Would you help me find out the answer? The kernal and the ramdisk file I use are installed by rpm package in the RHEL AS5.1 installation disk. And here is what I do: 1. I create a image file /home1/rh9/rh9.img and mount it to /mnt/loop1. 2. Copy the whole rh9 system(a physical linux system installed in /dev/sda5) into /mnt/loop1; 3. Copy the directory /lib/modules/2.6.18-53.el5xen of my RHEL AS5.1 (on /dev/sda1) into /mnt/loop1/lib/modules; 4. Modify /mnt/loop1/etc/fstab, where mount points are fixed to match the settings of DomU configuration file. Thank you so much! ############ DomU configuration file: kernel = "/boot/vmlinuz-2.6.18-53.el5xen" ramdisk ="/boot/initrd-2.6.18-53.el5xen.img" memory = 1024 name = "rh9" disk ['file:/home1/rh9/rh9.img,sda9,w','file:/home1/rh9/rh9_swap.img,sda8,w'] root = "/dev/sda9 ro" ############## Booting message: Started domain rh9 Linux version 2.6.18-53.el5xen (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) 304MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 264192 Kernel command line: root=/dev/sda9 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0727000 soft=c0707000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1662.499 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 1026984k/1056768k available (2049k kernel code, 20692k reserved, 844k data, 168k init, 311304k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4158.11 BogoMIPS (lpj=8316221) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 5216k freed Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1228655943.467:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key FF48355AC6B12D27 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Linux version 2.6.18-53.el5xen (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) 304MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 264192 Kernel command line: root=/dev/sda9 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0727000 soft=c0707000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1662.499 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 1026984k/1056768k available (2049k kernel code, 20692k reserved, 844k data, 168k init, 311304k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4158.11 BogoMIPS (lpj=8316221) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 5216k freed Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1228655943.467:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key FF48355AC6B12D27 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/2057 XENBUS: Device with no driver: device/vbd/2056 Freeing unused kernel memory: 168k freed Write protecting the kernel read-only data: 360k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 Loading ohci-hcd.ko module Loading ehci-hcd.ko module Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading libata.ko module Loading ahci.ko module Loading ata_piix.ko module Waiting for driver initialization. Scanning and configuring dmraid supported devices Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Kernel panic - not syncing: Attempted to kill init! ############## xm info gives the following message release : 2.6.18-53.el5xen version : #1 SMP Wed Oct 10 17:06:12 EDT 2007 machine : i686 nr_cpus : 2 nr_nodes : 1 sockets_per_node : 1 cores_per_socket : 2 threads_per_core : 1 cpu_mhz : 1662 hw_caps : bfebfbff:20100000:00000000:00000140:0000e39d:00000000:00000001 total_memory : 2046 free_memory : 1508 xen_major : 3 xen_minor : 1 xen_extra : .0-53.el5 xen_caps : xen-3.0-x86_32p xen_pagesize : 4096 platform_params : virt_start=0xf5800000 xen_changeset : unavailable cc_compiler : gcc version 4.1.2 20070626 (Red Hat 4.1.2-14) cc_compile_by : brewbuilder cc_compile_domain : build.redhat.com cc_compile_date : Wed Oct 10 16:30:55 EDT 2007 xend_config_format : 2 > -----Original message-----> From: "Nick Couchman" <Nick.Couchman@seakr.com>> Date: Dec 6, 2008, Sat.> To: math_physics@163.com> Copy to: xen-users@lists.xensource.com> Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel>> The kernel version doesn't matter so much as the Xen version in the>kernel as well as the type of kernel. Try installing a bigmem or> hugemem Xen kernel as those should include PAE support and see if that> helps.> Nick Couchman> Manager, Information Technology > -----Original Message-----> From: <math_physics@163.com>> To: Nick Couchman <Nick.Couchman@seakr.com>> > Sent: 12/5/2008 8:38:21 PM> Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel> > Hi, Nick:>> Should the kernel version of Dom0 be the same with the kernel versionof> DomU? > > I install xen packages on my RHEL AS 5.1 using rpm package, but I can't> find xenU kernel. I only found kernel files whose name include string> 'xen' only. So I built a xenU kernel (2.6.16). > > Then I boot xenU kernel in RHEL AS 5.1, and it gives me the error> messege.> > > Thank you !> > > > > -----Original message-----> From: "Nick Couchman" <Nick.Couchman@seakr.com>> Date: Dec 6, 2008, Sat.> To: math_physics@163.com> Copy: xen-users@lists.xensource.com> Subject: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel> > Use xm info to figure out which kernels are supported - I suggest trying> a 32-bit PAE kernel - my SLES10 64-bit Linux builds don't support plain> 32-bit kernels, but they do support 32-bit PAE (big/huge) kernels.> > -Nick> > > -----Original Message-----> From: math_physics@163.com> To: Xen MailList <xen-users@lists.xensource.com>> Subject: [Xen-users] xen-3.0-x86_32 not supported by xen kernel> Date: Fri, 5 Dec 2008 09:56:45 +0800 (CST)> > > I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU> with the kernel, it gives me error message:> > Error: (2, 'Invalid kernel', 'xc_dom_compat_check: guest type> xen-3.0-x86_32 not supported by xen kernel, sorry\n')> > > Can someone give me any suggestion about this problem?> > Thank you!> > Joe> > > > >> This e-mail may contain confidential and privileged material for the>sole use of the intended recipient. If this email is not intended for> you, or you are not responsible for the delivery of this message to the> intended recipient, please note that this message may contain SEAKR> Engineering (SEAKR) Privileged/Proprietary Information. In such a case,> you are strictly prohibited from downloading, photocopying, distributing> or otherwise using this message, its contents or attachments in any way.> If you have received this message in error, please notify us immediately> by replying to this e-mail and delete the message from your mailbox.> Information contained in this message that does not relate to the> business of SEAKR is neither endorsed by nor attributable to SEAKR.> > > This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR. This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR. [广告] 2008年最受关注楼盘 ( http://popme.163.com/link/003985_1010_7027.html ) This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
math_physics@163.com
2008-Dec-10 14:30 UTC
Re: Re: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by
xenkernel
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_131682_27459552.1228919439475"
X-Originating-IP: [118.181.8.116]
X-Priority: 3
X-Mailer: Coremail Webmail Server Version XT_Ux_snapshot build
081119(6371.2087.2083) Copyright (c) 2002-2008 www.mailtech.cn 163com
------=_Part_131682_27459552.1228919439475
Content-Type: text/plain; charset=GBK
Content-Transfer-Encoding: 7bit
Hi, Nick:
Two questions:
1. The initrd image "initrd-2.6.18-53.el5xen.img" works well for
Dom0 and the following is the content of file grub.conf. Why doesn''t it
work for DomU?
##########
title Red Hat Enterprise Linux Server AS5.1 (2.6.18-53.el5xen)
root (hd0,0)
kernel /boot/xen.gz-2.6.18-53.el5 dom0_mem=512M
module /boot/vmlinuz-2.6.18-53.el5xen ro root=LABEL=/1 rhgb quiet
module /boot/initrd-2.6.18-53.el5xen.img
############
2. How to rebuild initrd image to include xenblk?
Thank you so much!
-----Original message-----
From: "Nick Couchman" <Nick.Couchman@seakr.com>
Date: Dec.10, 2008, Wed
To: math_physics@163.com
Copy: xen-users@lists.xensource.com
Subject: Re: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xenkernel
You probably need to rebuild the initrd image used to boot so that it has the
xenblk driver included. The following messages indicate that the xenblk driver
isn''t loading:
XENBUS: Device with no driver: device/vbd/2057
XENBUS: Device with no driver: device/vbd/2056
-Nick
>>> <math_physics@163.com> 2008/12/08 20:14 >>>
Yes, I have editted the fstab file in /mnt/loop1/etc. Its content is modified
to:
/dev/sda9 / other parameters
/dev/sda8 swap other parameters
-----Original message-----
From: "Nick Couchman" <Nick.Couchman@seakr.com>
Date: Dec. 9, 2008, Tu.
To:math_physics@163.com
Copy to:
Subject: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
Did you edit the fstab file in /mnt/loop1/etc with the new root information?
-Nick
>>> <math_physics@163.com> 2008/12/07 06:48 >>>
Hi, Nick:
Thank you so much for you help! But I still can''t solve my problem:(.
I still need help:)
I post my DomU configure file and booting messge here. Would you help me find
out the answer?
The kernal and the ramdisk file I use are installed by rpm package in the RHEL
AS5.1 installation disk.
And here is what I do:
1. I create a image file /home1/rh9/rh9.img and mount it to /mnt/loop1.
2. Copy the whole rh9 system(a physical linux system installed in /dev/sda5)
into /mnt/loop1;
3. Copy the directory /lib/modules/2.6.18-53.el5xen of my RHEL AS5.1 (on
/dev/sda1) into /mnt/loop1/lib/modules;
4. Modify /mnt/loop1/etc/fstab, where mount points are fixed to match the
settings of DomU configuration file.
Thank you so much!
############ DomU configuration file:
kernel = "/boot/vmlinuz-2.6.18-53.el5xen"
ramdisk ="/boot/initrd-2.6.18-53.el5xen.img"
memory = 1024
name = "rh9"
disk =
[''file:/home1/rh9/rh9.img,sda9,w'',''file:/home1/rh9/rh9_swap.img,sda8,w'']
root = "/dev/sda9 ro"
############## Booting message:
Started domain rh9
Linux version 2.6.18-53.el5xen (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc
version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000040800000 (usable)
304MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 264192
Kernel command line: root=/dev/sda9 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0727000 soft=c0707000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 1662.499 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 1026984k/1056768k available (2049k kernel code, 20692k reserved, 844k
data, 168k init, 311304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4158.11 BogoMIPS (lpj=8316221)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Checking ''hlt'' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5216k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not
acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not
acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1228655943.467:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key FF48355AC6B12D27
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.18-53.el5xen (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc
version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000040800000 (usable)
304MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 264192
Kernel command line: root=/dev/sda9 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0727000 soft=c0707000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 1662.499 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 1026984k/1056768k available (2049k kernel code, 20692k reserved, 844k
data, 168k init, 311304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4158.11 BogoMIPS (lpj=8316221)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Checking ''hlt'' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5216k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not
acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not
acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1228655943.467:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key FF48355AC6B12D27
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/2057
XENBUS: Device with no driver: device/vbd/2056
Freeing unused kernel memory: 168k freed
Write protecting the kernel read-only data: 360k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading ahci.ko module
Loading ata_piix.ko module
Waiting for driver initialization.
Scanning and configuring dmraid supported devices
Creating root device.
Mounting root filesystem.
mount: could not find filesystem ''/dev/root''
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
############## xm info gives the following message
release : 2.6.18-53.el5xen
version : #1 SMP Wed Oct 10 17:06:12 EDT 2007
machine : i686
nr_cpus : 2
nr_nodes : 1
sockets_per_node : 1
cores_per_socket : 2
threads_per_core : 1
cpu_mhz : 1662
hw_caps :
bfebfbff:20100000:00000000:00000140:0000e39d:00000000:00000001
total_memory : 2046
free_memory : 1508
xen_major : 3
xen_minor : 1
xen_extra : .0-53.el5
xen_caps : xen-3.0-x86_32p
xen_pagesize : 4096
platform_params : virt_start=0xf5800000
xen_changeset : unavailable
cc_compiler : gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)
cc_compile_by : brewbuilder
cc_compile_domain : build.redhat.com
cc_compile_date : Wed Oct 10 16:30:55 EDT 2007
xend_config_format : 2
?> -----Original message-----> From: "Nick Couchman" <Nick.Couchman@seakr.com>
> Date: Dec 6, 2008, Sat.
> To: math_physics@163.com
> Copy to: xen-users@lists.xensource.com
> Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
>
> The kernel version doesn''t matter so much as the Xen version in
the
> kernel as well as the type of kernel. Try installing a bigmem or
> hugemem Xen kernel as those should include PAE support and see if that
> helps.
> Nick Couchman
> Manager, Information Technology
> -----Original Message-----
> From: <math_physics@163.com>
> To: Nick Couchman <Nick.Couchman@seakr.com>
>
> Sent: 12/5/2008 8:38:21 PM
> Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
>
> Hi, Nick:
>
> Should the kernel version of Dom0 be the same with the kernel version of
> DomU?
>
> I install xen packages on my RHEL AS 5.1 using rpm package, but I
can''t
> find xenU kernel. I only found kernel files whose name include string
> ''xen'' only. So I built a xenU kernel (2.6.16).
>
> Then I boot xenU kernel in RHEL AS 5.1, and it gives me the error
> messege.
>
>
> Thank you !
>
>
>
>
> -----Original message-----
> From: "Nick Couchman" <Nick.Couchman@seakr.com>
> Date: Dec 6, 2008, Sat.
> To: math_physics@163.com
> Copy: xen-users@lists.xensource.com
> Subject: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
>
> Use xm info to figure out which kernels are supported - I suggest trying
> a 32-bit PAE kernel - my SLES10 64-bit Linux builds don''t support
plain
> 32-bit kernels, but they do support 32-bit PAE (big/huge) kernels.
>
> -Nick
>
>
> -----Original Message-----
> From: math_physics@163.com
> To: Xen MailList <xen-users@lists.xensource.com>
> Subject: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
> Date: Fri, 5 Dec 2008 09:56:45 +0800 (CST)
>
>
> I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU
> with the kernel, it gives me error message:
>
> Error: (2, ''Invalid kernel'',
''xc_dom_compat_check: guest type
> xen-3.0-x86_32 not supported by xen kernel, sorry\n'')
>
>
> Can someone give me any suggestion about this problem?
>
> Thank you!
>
> Joe
>
>
>
>
>
> This e-mail may contain confidential and privileged material for the
> sole use of the intended recipient. If this email is not intended for
> you, or you are not responsible for the delivery of this message to the
> intended recipient, please note that this message may contain SEAKR
> Engineering (SEAKR) Privileged/Proprietary Information. In such a case,
> you are strictly prohibited from downloading, photocopying, distributing
> or otherwise using this message, its contents or attachments in any way.
> If you have received this message in error, please notify us immediately
> by replying to this e-mail and delete the message from your mailbox.
> Information contained in this message that does not relate to the
> business of SEAKR is neither endorsed by nor attributable to SEAKR.
>
>
> This e-mail may contain confidential and privileged material for the sole
use of the intended recipient. If this email is not intended for you, or you
are not responsible for the delivery of this message to the intended recipient,
please note that this message may contain SEAKR Engineering (SEAKR)
Privileged/Proprietary Information. In such a case, you are strictly prohibited
from downloading, photocopying, distributing or otherwise using this message,
its contents or attachments in any way. If you have received this message in
error, please notify us immediately by replying to this e-mail and delete the
message from your mailbox. Information contained in this message that does not
relate to the business of SEAKR is neither endorsed by nor attributable to
SEAKR.
This e-mail may contain confidential and privileged material for the sole use of
the intended recipient. If this email is not intended for you, or you are not
responsible for the delivery of this message to the intended recipient, please
note that this message may contain SEAKR Engineering (SEAKR)
Privileged/Proprietary Information. In such a case, you are strictly prohibited
from downloading, photocopying, distributing or otherwise using this message,
its contents or attachments in any way. If you have received this message in
error, please notify us immediately by replying to this e-mail and delete the
message from your mailbox. Information contained in this message that does not
relate to the business of SEAKR is neither endorsed by nor attributable to
SEAKR.
[??] 2008???????
This e-mail may contain confidential and privileged material for the sole use of
the intended recipient. If this email is not intended for you, or you are not
responsible for the delivery of this message to the intended recipient, please
note that this message may contain SEAKR Engineering (SEAKR)
Privileged/Proprietary Information. In such a case, you are strictly prohibited
from downloading, photocopying, distributing or otherwise using this message,
its contents or attachments in any way. If you have received this message in
error, please notify us immediately by replying to this e-mail and delete the
message from your mailbox. Information contained in this message that does not
relate to the business of SEAKR is neither endorsed by nor attributable to
SEAKR.
------=_Part_131682_27459552.1228919439475
Content-Type: text/html; charset=GBK
Content-Transfer-Encoding: quoted-printable
Hi, Nick:<br> Two questions:<br> 1.
The initrd image "initrd-2.6.18-53.el5xen.img" works well for Dom0 and
the following is the content of file grub.conf. Why doesn''t it work for
DomU?<br>##########<br>title Red Hat Enterprise Linux Server AS5.1
(2.6.18-53.el5xen)<br>
root
(hd0,0)<br>
kernel /boot/xen.gz-2.6.18-53.el5
dom0_mem=3D512M<br>
module /boot/vmlinuz-2.6.18-53.el5xen ro root=3DLABEL=3D/1 rhgb
quiet<br>
module
/boot/initrd-2.6.18-53.el5xen.img<br>############<br><br>2.
How to rebuild initrd image to include xenblk? <br><br>
Thank you so much!<br><br><span>
=20
</span><br><blockquote style=3D"border-left: 2px solid
rgb(160, 198, 229); padding-left: 5px; margin-left: 5px; margin-right:
0pt;">-----Original message-----<br>
<b>From:</b> "Nick Couchman"
<Nick.Couchman@seakr.com><br>
<b>Date:</b> Dec.10, 2008, Wed<br>
<b>To:</b> math_physics@163.com<br>
<b>Copy:</b> xen-users@lists.xensource.com<br>
<b>Subject:</b> Re: Re: Re: Re: [Xen-users] xen-3.0-x86_32 not
supported by
=09xenkernel<br><br>
<div>You probably need to rebuild the initrd image used to boot so that it
has the xenblk driver included. The following messages indicate that
the xenblk driver isn''t loading:</div>
<div>XENBUS: Device with no driver: device/vbd/2057<br>XENBUS:
Device with no driver: device/vbd/2056<br></div>
<div>-Nick<br><br>>>> <<a
href=3D"mailto:math_physics@163.com">math_physics@163.com</a>>
2008/12/08 20:14 >>><br></div>
<p>Yes, I have editted the fstab file in /mnt/loop1/etc. Its content is
modified to:</p>
<p>/dev/sda9
/
other
parameters<br>/dev/sda8
swap other
parameters<br><br><span></span><br></p>
<blockquote style=3D"border-left: 2px solid rgb(160, 198, 229);
padding-left: 5px; margin-left: 5px; margin-right: 0px;">-----Original
message-----<br><b>From:</b> "Nick Couchman"
<<a
href=3D"mailto:Nick.Couchman@seakr.com">Nick.Couchman@seakr.com</a>><br><b>Date:</b>
Dec. 9, 2008, Tu.<br><b>To:</b> <a
href=3D"mailto:math_physics@163.com">math_physics@163.com</a><br><b>Copy
to:</b> <br><b>Subject:</b> Re: Re: Re: [Xen-users]
xen-3.0-x86_32 not supported by xen kernel<br><br>
<div>Did you edit the fstab file in /mnt/loop1/etc with the new root
information?</div>
<div> </div>
<div>-Nick<br><br>>>> <<a
href=3D"mailto:math_physics@163.com">math_physics@163.com</a>>
2008/12/07 06:48 >>><br></div>
<div>Hi, Nick:<br> Thank you so much for you help! But I
still can''t solve my problem:(. I still need help:)<br>
I post my DomU configure file and booting messge here. Would you help me find
out the answer?<br> The kernal and the ramdisk file I use are
installed by rpm package in the RHEL AS5.1 installation disk.
<br> And here is what I do: <br> 1. I
create a image file /home1/rh9/rh9.img and mount it to /mnt/loop1.
<br> 2. Copy the whole rh9 system(a physical linux system
installed in /dev/sda5) into /mnt/loop1;<br> 3. Copy the
directory /lib/modules/2.6.18-53.el5xen of my RHEL AS5.1 (on /dev/sda1) into
/mnt/loop1/lib/modules;<br> 4. Modify /mnt/loop1/etc/fstab,
where mount points are fixed to match the settings of DomU configuration
file.<br> Thank you so
much!<br>############ DomU configuration file:<br>kernel =3D
"/boot/vmlinuz-2.6.18-53.el5xen"<br>ramdisk
=3D"/boot/initrd-2.6.18-53.el5xen.img"<br>memory =3D
1024<br>name =3D "rh9"<br>disk =3D
[''file:/home1/rh9/rh9.img,sda9,w'',''file:/home1/rh9/rh9_swap.img,sda8,w'']<br>root
=3D "/dev/sda9 ro"<br><br>############## Booting message:
<br>Started domain rh9<br>Linux version 2.6.18-53.el5xen (<a
href=3D"mailto:brewbuilder@hs20-bc2-3.build.redhat.com">brewbuilder@hs20-bc2-3.build.redhat.com</a>)
(gcc version 4.12 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT
2007<br>BIOS-provided physical RAM map:<br> Xen:
0000000000000000 - 0000000040800000 (usable)<br>304MB HIGHMEM
available.<br>727MB LOWMEM available.<br>NX (Execute Disable)
protection: active<br>ACPI in unprivileged domain disabled<br>Built
1 zonelists. Total pages: 264192<br>Kernel command
line: root=3D/dev/sda9 ro<br>Enabling fast FPU save and
restore... done.<br>Enabling unmasked SIMD FPU exception support...
done.<br>Initializing CPU#0<br>CPU 0 irqstacks, hard=3Dc0727000
soft=3Dc0707000<br>PID hash table entries: 4096 (order: 12, 16384
bytes)<br>Xen reported: 1662.499 MHz processor.<br>Console: colour
dummy device 80x25<br>Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)<br>Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)<br>Software IO TLB disabled<br>vmalloc area:
ee000000-f4ffe000, maxmem 2d7fe000<br>Memory: 1026984k/1056768k available
(2049k kernel code, 20692k reserved, 844k data, 168k init, 311304k
highmem)<br>Checking if this processor honours the WP bit even in
supervisor mode... Ok.<br>Calibrating delay using timer specific routine..
4158.11 BogoMIPS (lpj=3D8316221)<br>Security Framework v1.0.0
initialized<br>SELinux:
Initializing.<br>selinux_register_security: Registering
secondary module capability<br>Capability LSM initialized as
secondary<br>Mount-cache hash table entries: 512<br>CPU: L1 I cache:
32K, L1 D cache: 32K<br>CPU: L2 cache: 2048K<br>Checking
''hlt'' instruction... OK.<br>SMP alternatives: switching
to UP code<br>Freeing SMP alternatives: 13k freed<br>Brought up 1
CPUs<br>checking if image is initramfs... it is<br>Freeing initrd
memory: 5216k freed<br>Grant table initialized<br>NET: Registered
protocol family 16<br>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER,
Thread C06D7AA0 could not acquire Mutex [2] [20060707]<br>ACPI Exception
(utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2]
[20060707]<br>Brought up 1 CPUs<br>PCI: setting up Xen PCI frontend
stub<br>ACPI: Interpreter disabled.<br>Linux Plug and Play Support
v0.97 (c) Adam Belay<br>pnp: PnP ACPI: disabled<br>xen_mem:
Initialising balloon driver.<br>usbcore: registered new driver
usbfs<br>usbcore: registered new driver hub<br>PCI: System does not
support PCI<br>PCI: System does not support PCI<br>NetLabel:
Initializing<br>NetLabel: domain hash size =3D
128<br>NetLabel: protocols =3D UNLABELED
CIPSOv4<br>NetLabel: unlabeled traffic allowed by
default<br>NET: Registered protocol family 2<br>IP route cache hash
table entries: 32768 (order: 5, 131072 bytes)<br>TCP established hash
table entries: 131072 (order: 8, 1048576 bytes)<br>TCP bind hash table
entries: 65536 (order: 7, 524288 bytes)<br>TCP: Hash tables configured
(established 131072 bind 65536)<br>TCP reno registered<br>audit:
initializing netlink socket (disabled)<br>audit(1228655943.467:1):
initialized<br>highmem bounce pool size: 64 pages<br>VFS: Disk
quotas dquot_6.5.1<br>Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)<br>Initializing Cryptographic API<br>ksign: Installing public
key data<br>Loading keyring<br>- Added public key
FF48355AC6B12D27<br>- User ID: Red Hat, Inc. (Kernel Module GPG
key)<br>io scheduler noop registered<br>io scheduler anticipatory
registered<br>io scheduler deadline registered<br>io scheduler cfq
registered (default)<br>pci_hotplug: PCI Hot Plug PCI Core version:
0.5<br>rtc: IRQ 8 is not free.<br>Non-volatile memory driver
v1.2<br>Linux agpgart interface v0.101 (c) Dave Jones<br>RAMDISK
driver initialized: 16 RAM disks of 16384K size 4096 blocksize<br>Xen
virtual console successfully installed as xvc0<br>Linux version
2.6.18-53.el5xen (<a
href=3D"mailto:brewbuilder@hs20-bc2-3.build.redhat.com">brewbuilder@hs20-bc2-3.build.redhat.com</a>)
(gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 17:06:12 EDT
2007<br>BIOS-provided physical RAM map:<br> Xen:
0000000000000000 - 0000000040800000 (usable)<br>304MB HIGHMEM
available.<br>727MB LOWMEM available.<br>NX (Execute Disable)
protection: active<br>ACPI in unprivileged domain disabled<br>Built
1 zonelists. Total pages: 264192<br>Kernel command
line: root=3D/dev/sda9 ro<br>Enabling fast FPU save and
restore... done.<br>Enabling unmasked SIMD FPU exception support...
done.<br>Initializing CPU#0<br>CPU 0 irqstacks, hard=3Dc0727000
soft=3Dc0707000<br>PID hash table entries: 4096 (order: 12, 16384
bytes)<br>Xen reported: 1662.499 MHz processor.<br>Console: colour
dummy device 80x25<br>Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)<br>Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)<br>Software IO TLB disabled<br>vmalloc area:
ee000000-f4ffe000, maxmem 2d7fe000<br>Memory: 1026984k/1056768k available
(2049k kernel code, 20692k reserved, 844k data, 168k init, 311304k
highmem)<br>Checking if this processor honours the WP bit even in
supervisor mode... Ok.<br>Calibrating delay using timer specific routine..
4158.11 BogoMIPS (lpj=3D8316221)<br>Security Framework v1.0.0
initialized<br>SELinux:
Initializing.<br>selinux_register_security: Registering
secondary module capability<br>Capability LSM initialized as
secondary<br>Mount-cache hash table entries: 512<br>CPU: L1 I cache:
32K, L1 D cache: 32K<br>CPU: L2 cache: 2048K<br>Checking
''hlt'' instruction... OK.<br>SMP alternatives: switching
to UP code<br>Freeing SMP alternatives: 13k freed<br>Brought up 1
CPUs<br>checking if image is initramfs... it is<br>Freeing initrd
memory: 5216k freed<br>Grant table initialized<br>NET: Registered
protocol family 16<br>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER,
Thread C06D7AA0 could not acquire Mutex [2] [20060707]<br>ACPI Exception
(utmutex-0262): AE_BAD_PARAMETER, Thread C06D7AA0 could not acquire Mutex [2]
[20060707]<br>Brought up 1 CPUs<br>PCI: setting up Xen PCI frontend
stub<br>ACPI: Interpreter disabled.<br>Linux Plug and Play Support
v0.97 (c) Adam Belay<br>pnp: PnP ACPI: disabled<br>xen_mem:
Initialising balloon driver.<br>usbcore: registered new driver
usbfs<br>usbcore: registered new driver hub<br>PCI: System does not
support PCI<br>PCI: System does not support PCI<br>NetLabel:
Initializing<br>NetLabel: domain hash size =3D
128<br>NetLabel: protocols =3D UNLABELED
CIPSOv4<br>NetLabel: unlabeled traffic allowed by
default<br>NET: Registered protocol family 2<br>IP route cache hash
table entries: 32768 (order: 5, 131072 bytes)<br>TCP established hash
table entries: 131072 (order: 8, 1048576 bytes)<br>TCP bind hash table
entries: 65536 (order: 7, 524288 bytes)<br>TCP: Hash tables configured
(established 131072 bind 65536)<br>TCP reno registered<br>audit:
initializing netlink socket (disabled)<br>audit(1228655943.467:1):
initialized<br>highmem bounce pool size: 64 pages<br>VFS: Disk
quotas dquot_6.5.1<br>Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)<br>Initializing Cryptographic API<br>ksign: Installing public
key data<br>Loading keyring<br>- Added public key
FF48355AC6B12D27<br>- User ID: Red Hat, Inc. (Kernel Module GPG
key)<br>io scheduler noop registered<br>io scheduler anticipatory
registered<br>io scheduler deadline registered<br>io scheduler cfq
registered (default)<br>pci_hotplug: PCI Hot Plug PCI Core version:
0.5<br>rtc: IRQ 8 is not free.<br>Non-volatile memory driver
v1.2<br>Linux agpgart interface v0.101 (c) Dave Jones<br>RAMDISK
driver initialized: 16 RAM disks of 16384K size 4096 blocksize<br>Xen
virtual console successfully installed as xvc0<br>Event-channel device
installed.<br>Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2<br>ide: Assuming 50MHz system bus speed for PIO modes; override
with idebus=3Dxx<br>ide-floppy driver 0.99.newide<br>usbcore:
registered new driver hiddev<br>usbcore: registered new driver
usbhid<br>drivers/usb/input/hid-core.c: v2.6:USB HID core
driver<br>PNP: No PS/2 controller found. Probing ports
directly.<br>i8042.c: No controller found.<br>mice: PS/2 mouse
device common for all mice<br>md: md driver 0.90.3 MAX_MD_DEVS=3D256,
MD_SB_DISKS=3D27<br>md: bitmap version 4.39<br>TCP bic
registered<br>Initializing IPsec netlink socket<br>NET: Registered
protocol family 1<br>NET: Registered protocol family 17<br>Using IPI
No-Shortcut mode<br>XENBUS: Device with no driver:
device/vbd/2057<br>XENBUS: Device with no driver:
device/vbd/2056<br>Freeing unused kernel memory: 168k freed<br>Write
protecting the kernel read-only data: 360k<br>Red Hat nash version
5.1.19.6 starting<br>Mounting proc filesystem<br>Mounting sysfs
filesystem<br>Creating /dev<br>Creating initial device
nodes<br>Setting up hotplug.<br>Creating block device
nodes.<br>Loading uhci-hcd.ko module<br>USB Universal Host
Controller Interface driver v3.0<br>Loading ohci-hcd.ko
module<br>Loading ehci-hcd.ko module<br>Loading jbd.ko
module<br>Loading ext3.ko module<br>Loading scsi_mod.ko
module<br>SCSI subsystem initialized<br>Loading sd_mod.ko
module<br>Loading libata.ko module<br>Loading ahci.ko
module<br>Loading ata_piix.ko module<br>Waiting for driver
initialization.<br>Scanning and configuring dmraid supported
devices<br>Creating root device.<br>Mounting root
filesystem.<br>mount: could not find filesystem
''/dev/root''<br>Setting up other
filesystems.<br>Setting up new root fs<br>setuproot: moving /dev
failed: No such file or directory<br>no fstab.sys, mounting internal
defaults<br>setuproot: error mounting /proc: No such file or
directory<br>setuproot: error mounting /sys: No such file or
directory<br>Switching to new root and running init.<br>unmounting
old /dev<br>unmounting old /proc<br>unmounting old
/sys<br>switchroot: mount failed: No such file or
directory<br>Kernel panic - not syncing: Attempted to kill
init!<br><br>############## xm info gives the following
message<br>release
:
2.6.18-53.el5xen<br>version
: #1 SMP Wed Oct 10 17:06:12 EDT
2007<br>machine
:
i686<br>nr_cpus
:
2<br>nr_nodes
:
1<br>sockets_per_node
:
1<br>cores_per_socket
:
2<br>threads_per_core
:
1<br>cpu_mhz
:
1662<br>hw_caps
:
bfebfbff:20100000:00000000:00000140:0000e39d:00000000:00000001<br>total_memory
:
2046<br>free_memory
:
1508<br>xen_major
:
3<br>xen_minor
:
1<br>xen_extra
:
.0-53.el5<br>xen_caps
: xen-3.0-x86_32p
<br>xen_pagesize
:
4096<br>platform_params
:
virt_start=3D0xf5800000<br>xen_changeset
:
unavailable<br>cc_compiler
: gcc version 4.1.2 20070626 (Red Hat
4.1.2-14)<br>cc_compile_by
:
brewbuilder<br>cc_compile_domain
:
build.redhat.com<br>cc_compile_date
: Wed Oct 10 16:30:55 EDT
2007<br>xend_config_format :
2</div>
<div> </div>
<div> </div><pre> > -----Original
message-----
> From: "Nick Couchman" <<a
href=3D"mailto:Nick.Couchman@seakr.com">Nick.Couchman@seakr.com</a>>
> Date: Dec 6, 2008, Sat.
> To: <a
href=3D"mailto:math_physics@163.com">math_physics@163.com</a>
> Copy to: <a
href=3D"mailto:xen-users@lists.xensource.com">xen-users@lists.xensource.com</a>
> Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
>=20
> The kernel version doesn''t matter so much as the Xen version
in the
> kernel as well as the type of kernel. Try installing a bigmem or
> hugemem Xen kernel as those should include PAE support and see if that
> helps.
> Nick Couchman
> Manager, Information Technology=20
> -----Original Message-----
> From: <<a
href=3D"mailto:math_physics@163.com">math_physics@163.com</a>>
> To: Nick Couchman <<a
href=3D"mailto:Nick.Couchman@seakr.com">Nick.Couchman@seakr.com</a>>
>=20
> Sent: 12/5/2008 8:38:21 PM
> Subject: Re: Re: [Xen-users] xen-3.0-x86_32 not supported by xen
kernel
>=20
> Hi, Nick:
>=20
> Should the kernel version of Dom0 be the same with the kernel version
of
> DomU?=20
>=20
> I install xen packages on my RHEL AS 5.1 using rpm package, but I
can''t
> find xenU kernel. I only found kernel files whose name include string
> ''xen'' only. So I built a xenU kernel (2.6.16).=20
>=20
> Then I boot xenU kernel in RHEL AS 5.1, and it gives me the error
> messege.
>=20
>=20
> Thank you !
>=20
>=20
>=20
>=20
> -----Original message-----
> From: "Nick Couchman" <<a
href=3D"mailto:Nick.Couchman@seakr.com">Nick.Couchman@seakr.com</a>>
> Date: Dec 6, 2008, Sat.
> To: <a
href=3D"mailto:math_physics@163.com">math_physics@163.com</a>
> Copy: <a
href=3D"mailto:xen-users@lists.xensource.com">xen-users@lists.xensource.com</a>
> Subject: Re: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
>=20
> Use xm info to figure out which kernels are supported - I suggest
trying
> a 32-bit PAE kernel - my SLES10 64-bit Linux builds don''t
support plain
> 32-bit kernels, but they do support 32-bit PAE (big/huge) kernels.
>=20
> -Nick
>=20
>=20
> -----Original Message-----
> From: <a
href=3D"mailto:math_physics@163.com">math_physics@163.com</a>
> To: Xen MailList <<a
href=3D"mailto:xen-users@lists.xensource.com">xen-users@lists.xensource.com</a>>
> Subject: [Xen-users] xen-3.0-x86_32 not supported by xen kernel
> Date: Fri, 5 Dec 2008 09:56:45 +0800 (CST)
>=20
>=20
> I build a DomU kernel on RHEL AS5.1. But when I boot this Guest DomU
> with the kernel, it gives me error message:
>=20
> Error: (2, ''Invalid kernel'',
''xc_dom_compat_check: guest type
> xen-3.0-x86_32 not supported by xen kernel, sorry\n'')
>=20
>=20
> Can someone give me any suggestion about this problem?
> =20
> Thank you!
>=20
> Joe
>=20
>=20
>=20
>=20
>=20
> This e-mail may contain confidential and privileged material for the
> sole use of the intended recipient. If this email is not intended for
> you, or you are not responsible for the delivery of this message to the
> intended recipient, please note that this message may contain SEAKR
> Engineering (SEAKR) Privileged/Proprietary Information. In such a case,
> you are strictly prohibited from downloading, photocopying,
distributing
> or otherwise using this message, its contents or attachments in any
way.
> If you have received this message in error, please notify us
immediately
> by replying to this e-mail and delete the message from your mailbox.
> Information contained in this message that does not relate to the
> business of SEAKR is neither endorsed by nor attributable to SEAKR.
>=20
>=20
> This e-mail may contain confidential and privileged material for the
sole use of the intended recipient. If this email is not intended for you, or
you are not responsible for the delivery of this message to the intended
recipient, please note that this message may contain SEAKR Engineering (SEAKR)
Privileged/Proprietary Information. In such a case, you are strictly prohibited
from downloading, photocopying, distributing or otherwise using this message,
its contents or attachments in any way. If you have received this message in
error, please notify us immediately by replying to this e-mail and delete the
message from your mailbox. Information contained in this message that does not
relate to the business of SEAKR is neither endorsed by nor attributable to
SEAKR.
</pre><br><br>
<hr>
<div>
<p></p>
<hr>
This e-mail may contain confidential and privileged material for the sole use of
the intended recipient. If this email is not intended for you, or you are not
responsible for the delivery of this message to the intended recipient, please
note that this message may contain SEAKR Engineering (SEAKR)
Privileged/Proprietary Information. In such a case, you are strictly prohibited
from downloading, photocopying, distributing or otherwise using this message,
its contents or attachments in any way. If you have received this message in
error, please notify us immediately by replying to this e-mail and delete the
message from your mailbox. Information contained in this message that does not
relate to the business of SEAKR is neither endorsed by nor attributable to
SEAKR. </div></blockquote><br><br>
<hr>
<font style=3D"font-size: 12px; line-height: 15px;">[??]
</font><font style=3D"font-size: 12px; line-height:
15px;"></font><a style=3D"font-size: 12px; color: blue;
line-height: 15px; text-decoration: underline;"
href=3D"http://popme.163.com/link/003985_1010_7027.html">2008???????</a>
<div><p></p><hr>
This e-mail may contain confidential and privileged material for the sole use of
the intended recipient. If this email is not intended for you, or you are not
responsible for the delivery of this message to the intended recipient, please
note that this message may contain SEAKR Engineering (SEAKR)
Privileged/Proprietary Information. In such a case, you are strictly prohibited
from downloading, photocopying, distributing or otherwise using this message,
its contents or attachments in any way. If you have received this message in
error, please notify us immediately by replying to this e-mail and delete the
message from your mailbox. Information contained in this message that does not
relate to the business of SEAKR is neither endorsed by nor attributable to
SEAKR.
</div>
</blockquote><br><!-- footer --><br><hr/>
<a
href=3D"http://www.yeah.net">=CD=F8=D2=D7=C3=E2=B7=D1=D3=CA=A3=AC=C8=AB=C7=F2=D7=EE=B4=F3=B5=C4=D6=D0=CE=C4=C3=E2=B7=D1=D3=CA=CF=E4</a>
------=_Part_131682_27459552.1228919439475--
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users