anton
2008-Oct-11 21:38 UTC
[Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.
Hello everybody, I spend some time to get XEN up and running on ubuntu 8.04 I am new to XEN XEN is installed with “apt-get install ubuntu-xen-server” Ultimate goal is to have hvm running with VT-D (PCI cards bounded to specific DomU’s) 4 Gb memory in MSI NEO3-FR motherboard with P45 chipset Everything (except VT-D) is working smoothly I can run all kind of OS’s in DomU’s (fedora, ubuntu, windows-XP, windows 2000 server etc) It runs fast and it is very stable. Next step is to run asterisk in a domU (fedora 8) with its own ISDN card (Fritz Card). However this is failing. If I start the DomU the following is displayed: root@vdl-linux-10:/etc/xen# xm create fedora8 Using config file "./fedora8". Error: Fail to assign device(4:1.0): maybe VT-d is not enabled, or the device is not exist, or it has already been assigned to other domain root@vdl-linux-10: Questiona arised to me: If I “disable” the device on the kernel line with pciback.hide=(04:01.0), this seems to work according to logging. However the device is still visible with lspci in Dom0. Is this normal ? I am still not 100% convinced that my motherboard is VT-D compatible (BIOS ?) However if I read other posts , the output of ‘/sys/hypervisor/properties/capabilities’ and ‘/proc/cpuinfo’ should ensure that the system is VT-D capable. Latest BIOS is installed. Is there any tool to ‘proof’ my system is VT-D capable ? Any suggestions are welcome ! Thanks in advance, Anton additional info: I have disabled all drivers in Dom0 so the card complety free as far as I can see with lsmod. There is NO option in the Bios to enable/disable virtualization ==============LSPCI ===================== root@vdl-linux-10:/etc/xen# lspci 00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7300 GS] (rev a1) 02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) 02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) 04:01.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 02) <-=-= 04:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) root@vdl-linux-10:/etc/xen# ===============UNAME========= root@vdl-linux-10:/etc/xen# uname -a Linux vdl-linux-10 2.6.24-19-xen #1 SMP Wed Aug 20 21:08:51 UTC 2008 x86_64 GNU/Linux root@vdl-linux-10:/etc/xen# ===============CPUINFO======== root@vdl-linux-10:/etc/xen# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping : 10 cpu MHz : 3007.568 cache size : 64 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm bogomips : 6016.91 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping : 10 cpu MHz : 3007.568 cache size : 64 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm bogomips : 6016.91 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: root@vdl-linux-10:/etc/xen# ==============HYPERVISOR========== root@vdl-linux-10:/etc/xen# cat /sys/hypervisor/properties/capabilities xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 root@vdl-linux-10:/etc/xen# =============GRUB============ title Xen 3.2 / Ubuntu 8.04.1, kernel 2.6.24-19-xen root (hd0,0) kernel /boot/xen-3.2.gz iommu=1 module /boot/vmlinuz-2.6.24-19-xen root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1 module /boot/initrd.img-2.6.24-19-xen quiet ============DOMU================ kernel = "/usr/lib/xen/boot/hvmloader" builder = ''hvm'' extra =" iommu=soft swiotlb=force vtd=1" memory = 1024 name = "fedora8" vcpus = 1 vif = [ ''type=ioemu, bridge=xenbr0'' ] disk = [ ''phy:/dev/sdb6,ioemu:hdb,w'',''phy:/dev/loop1,hda:cdrom,r'' ] device_model = ''/usr/lib/xen/bin/qemu-dm'' ne2000=0 sdl=0 vnc=1 pci = [''0:4:1.0''] boot=''c'' ============XEND LOG============== [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:84) XendDomainInfo.create([''vm'', [''name'', ''fedora8''], [''memory'', 1024], [''vcpus'', 1], [''on_xend_start'', ''ignore''], [''on_xend_stop'', ''ignore''], [''image'', [''hvm'', [''kernel'', ''/usr/lib/xen/boot/hvmloader''], [''args'', '' iommu=soft swiotlb=force vtd=1''], [''device_model'', ''/usr/lib/xen/bin/qemu-dm''], [''pae'', 1], [''vcpus'', 1], [''boot'', ''c''], [''fda'', ''''], [''fdb'', ''''], [''timer_mode'', 0], [''localtime'', 0], [''serial'', ''''], [''stdvga'', 0], [''isa'', 0], [''nographic'', 0], [''soundhw'', ''''], [''vnc'', 1], [''vncunused'', 1], [''sdl'', 0], [''xauthority'', ''/root/.Xauthority''], [''rtc_timeoffset'', ''0''], [''monitor'', 0], [''acpi'', 1], [''apic'', 1], [''usb'', 0], [''usbdevice'', ''''], [''keymap'', ''''], [''pci'', [[''0x0'', ''0x4'', ''0x1'', ''0x0'']]], [''guest_os_type'', ''default'']]], [''device'', [''vbd'', [''uname'', ''phy:/dev/sdb6''], [''dev'', ''ioemu:hdb''], [''mode'', ''w'']]], [''device'', [''vbd'', [''uname'', ''phy:/dev/loop1''], [''dev'', ''hda:cdrom''], [''mode'', ''r'']]], [''device'', [''pci'', [''dev'', [''domain'', ''0x0''], [''bus'', ''0x4''], [''slot'', ''0x1''], [''func'', ''0x0'']]]], [''device'', [''vif'', [''bridge'', ''xenbr0''], [''type'', ''ioemu'']]]]) [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1637) XendDomainInfo.constructDomain [2008-10-11 23:18:05 5437] DEBUG (balloon:151) Balloon: 131072 KiB free; need 2048; done. [2008-10-11 23:18:05 5437] ERROR (XendDomainInfo:440) VM start failed Traceback (most recent call last): File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 419, in start XendTask.log_progress(0, 30, self._constructDomain) File "/usr/lib/python2.5/site-packages/xen/xend/XendTask.py", line 209, in log_progress retval = func(*args, **kwds) File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 1702, in _constructDomain % (bus, dev, func)) VmError: Fail to assign device(4:1.0): maybe VT-d is not enabled, or the device is not exist, or it has already been assigned to other domain [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1913) XendDomainInfo.destroy: domid=3 [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1930) XendDomainInfo.destroyDomain(3) [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1553) No device model [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1555) Releasing devices [2008-10-11 23:18:05 5437] ERROR (XendDomainInfo:89) Domain construction failed Traceback (most recent call last): File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 87, in create vm.start() File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 419, in start XendTask.log_progress(0, 30, self._constructDomain) File "/usr/lib/python2.5/site-packages/xen/xend/XendTask.py", line 209, in log_progress retval = func(*args, **kwds) File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 1702, in _constructDomain % (bus, dev, func)) VmError: Fail to assign device(4:1.0): maybe VT-d is not enabled, or the device is not exist, or it has already been assigned to other domain [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1913) XendDomainInfo.destroy: domid=None [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1930) XendDomainInfo.destroyDomain(None) [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1553) No device model [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1555) Releasing devices ==================DMESG========================= root@vdl-linux-10:/var/log/xen# dmesg [ 0.000000] Linux version 2.6.24-19-xen (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 21:08:51 UTC 2008 (Ubuntu 2.6.24-4.6-generic) [ 0.000000] Command line: root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000f347f000 (usable) [ 0.000000] Entering add_active_range(0, 0, 996479) 0 entries of 256 used [ 0.000000] end_pfn_map = 996479 [ 0.206239] DMI present. [ 0.206303] Entering add_active_range(0, 0, 996479) 0 entries of 256 used [ 0.216000] Zone PFN ranges: [ 0.216001] DMA 0 -> 4096 [ 0.216002] DMA32 4096 -> 1048576 [ 0.216003] Normal 1048576 -> 1048576 [ 0.216003] Movable zone start PFN for each node [ 0.216004] early_node_map[1] active PFN ranges [ 0.216005] 0: 0 -> 996479 [ 0.216007] On node 0 totalpages: 996479 [ 0.235583] DMA zone: 56 pages used for memmap [ 0.235585] DMA zone: 0 pages reserved [ 0.235587] DMA zone: 4040 pages, LIFO batch:0 [ 0.235734] DMA32 zone: 13567 pages used for memmap [ 0.235736] DMA32 zone: 978816 pages, LIFO batch:31 [ 0.268166] Normal zone: 0 pages used for memmap [ 0.268169] Movable zone: 0 pages used for memmap [ 0.278090] ACPI: RSDP 000F9990, 0014 (r0 ACPIAM) [ 0.278095] ACPI: RSDT BFF90000, 0040 (r1 7514MS A7514200 20080829 MSFT 97) [ 0.278099] ACPI: FACP BFF90200, 0084 (r1 7514MS A7514200 20080829 MSFT 97) [ 0.278104] ACPI: DSDT BFF905C0, 64FA (r1 A7514 A7514200 200 INTL 20051117) [ 0.278107] ACPI: FACS BFF9E000, 0040 [ 0.278109] ACPI: APIC BFF90390, 006C (r1 7514MS A7514200 20080829 MSFT 97) [ 0.278112] ACPI: MCFG BFF90400, 003C (r1 7514MS OEMMCFG 20080829 MSFT 97) [ 0.278115] ACPI: SLIC BFF90440, 0176 (r1 7514MS A7514200 20080829 MSFT 97) [ 0.278118] ACPI: OEMB BFF9E040, 0072 (r1 7514MS A7514200 20080829 MSFT 97) [ 0.278121] ACPI: HPET BFF985C0, 0038 (r1 7514MS OEMHPET 20080829 MSFT 97) [ 0.278124] ACPI: SSDT BFF9E5C0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20051117) [ 0.278150] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.278152] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.278153] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.278154] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.278157] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.278162] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.278164] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.278166] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.278167] ACPI: IRQ0 used by override. [ 0.278168] ACPI: IRQ2 used by override. [ 0.278169] ACPI: IRQ9 used by override. [ 0.278171] Setting APIC routing to xen [ 0.278172] Using ACPI (MADT) for SMP configuration information [ 0.278179] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) [ 0.278184] PERCPU: Allocating 22368 bytes of per cpu data [ 0.278205] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 982856 [ 0.278207] Kernel command line: root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1 [ 0.278219] Unknown boot option `pciback.permissive'': ignoring [ 0.278527] Initializing CPU#0 [ 0.278674] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.278735] Xen reported: 3007.568 MHz processor. [ 0.162979] console [xvc-1] enabled [ 0.165005] Console: colour VGA+ 80x25 [ 0.165007] console [tty0] enabled [ 0.168556] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.169665] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.224988] Software IO TLB enabled: [ 0.224989] Aperture: 64 megabytes [ 0.224990] Kernel range: ffff880006a62000 - ffff88000aa62000 [ 0.224990] Address size: 27 bits [ 0.225226] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.248802] Memory: 3805400k/3985916k available (2531k kernel code, 171588k reserved, 1329k data, 220k init) [ 0.315024] Calibrating delay using timer specific routine.. 6016.91 BogoMIPS (lpj=12033823) [ 0.315171] Security Framework initialized [ 0.315233] SELinux: Disabled at boot. [ 0.315294] AppArmor: AppArmor initialized [ 0.315354] Failure registering capabilities with primary security module. [ 0.315423] Mount-cache hash table entries: 256 [ 0.315574] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.315679] CPU: Physical Processor ID: 0 [ 0.315737] CPU: Processor Core ID: 0 [ 0.315797] SMP alternatives: switching to UP code [ 0.316439] Early unpacking initramfs... done [ 0.328893] ACPI: Core revision 20070126 [ 0.329018] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 0.330921] SMP alternatives: switching to SMP code [ 0.331514] Brought up 2 CPUs [ 0.000005] Initializing CPU#1 [ 0.000024] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000027] CPU: Physical Processor ID: 0 [ 0.000028] CPU: Processor Core ID: 0 [ 0.331802] CPU0 attaching sched-domain: [ 0.331803] domain 0: span 03 [ 0.331804] groups: 01 02 [ 0.331806] CPU1 attaching sched-domain: [ 0.331807] domain 0: span 03 [ 0.331807] groups: 02 01 [ 0.332218] net_namespace: 120 bytes [ 0.332277] failed to set up cpufreq notifier [ 0.332595] Time: 20:16:13 Date: 10/11/08 [ 0.332677] NET: Registered protocol family 16 [ 0.332890] ACPI: bus type pci registered [ 0.332995] PCI: Using configuration type 1 [ 0.335427] ACPI: EC: Look up EC in DSDT [ 0.337929] ACPI: Interpreter enabled [ 0.337988] ACPI: (supports S0 S1 S3 S5) [ 0.338221] ACPI: Using IOAPIC for interrupt routing [ 0.338419] Error attaching device data [ 0.338500] Error attaching device data [ 0.338581] Error attaching device data [ 0.338663] Error attaching device data [ 0.342952] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.345258] PCI: Transparent bridge - 0000:00:1e.0 [ 0.345360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.345448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.345533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.345589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.347633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.348245] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.348510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.349121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.349732] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *6 7 10 11 12 14 15) [ 0.350341] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.350952] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.351567] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.352192] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 5B, should be 5A [20070126] [ 0.352359] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.352438] pnp: PnP ACPI init [ 0.352499] ACPI: bus type pnp registered [ 0.354686] pnp: PnP ACPI: found 17 devices [ 0.354745] ACPI: ACPI bus type pnp unregistered [ 0.354803] xen_mem: Initialising balloon driver. [ 0.355099] PCI: Using ACPI for IRQ routing [ 0.355159] PCI: If a device doesn''t work, try "pci=routeirq". If it helps, post a report [ 0.364241] NET: Registered protocol family 8 [ 0.364311] NET: Registered protocol family 20 [ 0.364433] AppArmor: AppArmor Filesystem Enabled [ 0.364502] ACPI: RTC can wake from S4 [ 0.036676] Time: xen clocksource has been installed. [ 0.376266] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.376339] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.376416] system 00:07: ioport range 0x4c0-0x4ff has been reserved [ 0.376476] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.376537] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.376597] system 00:07: ioport range 0x480-0x4bf has been reserved [ 0.376657] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.376718] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.376779] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.376842] system 00:0a: iomem range 0xffc00000-0xffefffff could not be reserved [ 0.376915] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.376976] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.377050] system 00:0e: ioport range 0xa00-0xadf has been reserved [ 0.377110] system 00:0e: ioport range 0xae0-0xaef has been reserved [ 0.377172] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved [ 0.377234] system 00:10: iomem range 0x0-0x9ffff could not be reserved [ 0.377295] system 00:10: iomem range 0xc0000-0xcffff has been reserved [ 0.377355] system 00:10: iomem range 0xe0000-0xfffff could not be reserved [ 0.377416] system 00:10: iomem range 0x100000-0xbfffffff could not be reserved [ 0.377486] system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.377611] pciback 0000:04:01.0: seizing device <=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= [ 0.377904] PCI: Bridge: 0000:00:01.0 [ 0.377962] IO window: disabled. [ 0.378022] MEM window: fc000000-fe9fffff [ 0.378081] PREFETCH window: d0000000-dfffffff [ 0.378142] PCI: Bridge: 0000:00:1c.0 [ 0.378199] IO window: d000-dfff [ 0.378260] MEM window: fea00000-feafffff [ 0.378320] PREFETCH window: disabled. [ 0.378382] PCI: Bridge: 0000:00:1c.1 [ 0.378438] IO window: disabled. [ 0.378498] MEM window: disabled. [ 0.378558] PREFETCH window: disabled. [ 0.378621] PCI: Bridge: 0000:00:1e.0 [ 0.378679] IO window: e000-efff [ 0.378742] MEM window: feb00000-febfffff [ 0.378801] PREFETCH window: disabled. [ 0.378877] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.378993] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.379020] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.379137] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.379160] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.379277] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.379291] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.379314] NET: Registered protocol family 2 [ 0.412285] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.412614] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.413602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.413973] TCP: Hash tables configured (established 262144 bind 65536) [ 0.414033] TCP reno registered [ 0.424352] checking if image is initramfs... it is [ 0.440113] Freeing initrd memory: 23684k freed [ 0.447005] audit: initializing netlink socket (disabled) [ 0.447082] audit(1223756173.560:1): initialized [ 0.447394] VFS: Disk quotas dquot_6.5.1 [ 0.447467] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.447581] io scheduler noop registered [ 0.447640] io scheduler anticipatory registered [ 0.447698] io scheduler deadline registered [ 0.447763] io scheduler cfq registered (default) [ 0.447968] Boot video device is 0000:01:00.0 [ 0.448049] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.448118] assign_interrupt_mode Found MSI capability [ 0.448178] Allocate Port Service[0000:00:01.0:pcie00] [ 0.448285] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.448347] assign_interrupt_mode Found MSI capability [ 0.448408] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.448428] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.448518] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.448577] assign_interrupt_mode Found MSI capability [ 0.448636] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.448654] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.448865] Xen virtual console successfully installed as xvc0 [ 0.448954] Event-channel device installed. [ 0.453636] Successfully initialized TPM backend driver. [ 0.453815] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 0.453934] ACPI: PCI interrupt for device 0000:04:01.0 disabled <-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= [ 0.470001] Real Time Clock Driver v1.12ac [ 0.470186] hpet_acpi_add: no address or irqs in _CRS [ 0.470270] Linux agpgart interface v0.102 [ 0.470669] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 0.470779] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.470913] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.473091] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.473153] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.484304] mice: PS/2 mouse device common for all mice [ 0.484406] cpuidle: using governor ladder [ 0.484510] NET: Registered protocol family 1 [ 0.484603] registered taskstats version 1 [ 0.484722] Magic number: 12:691:295 [ 0.484783] hash matches device ttyz9 [ 0.484840] hash matches device ttywc [ 0.484913] hash matches device tty28 [ 0.484982] /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.485062] Freeing unused kernel memory: 220k freed [ 0.511687] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.336985] fuse init (API version 7.9) [ 0.679253] ACPI: SSDT BFF9E0C0, 0277 (r1 DpgPmm P001Ist 11 INTL 20051117) [ 0.679680] ACPI: SSDT BFF9E340, 0277 (r1 DpgPmm P002Ist 12 INTL 20051117) [ 0.679984] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 0.680150] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 0.860971] usbcore: registered new interface driver usbfs [ 0.861048] usbcore: registered new interface driver hub [ 0.866625] usbcore: registered new device driver usb [ 0.872827] USB Universal Host Controller Interface driver v3.0 [ 0.872926] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.873047] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 0.873051] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.873299] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.873402] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00 [ 0.873540] usb usb1: configuration #1 chosen from 1 choice [ 0.873611] hub 1-0:1.0: USB hub found [ 0.873674] hub 1-0:1.0: 2 ports detected [ 0.562427] SCSI subsystem initialized [ 0.570373] libata version 3.00 loaded. [ 0.605484] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.977362] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 0.977486] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 0.977489] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.977561] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 0.977663] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880 [ 0.977795] usb usb2: configuration #1 chosen from 1 choice [ 0.977867] hub 2-0:1.0: USB hub found [ 0.977929] hub 2-0:1.0: 2 ports detected [ 1.081227] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19 [ 1.081352] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 1.081356] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.081428] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 1.081529] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c800 [ 1.081689] usb usb3: configuration #1 chosen from 1 choice [ 1.081760] hub 3-0:1.0: USB hub found [ 1.081862] hub 3-0:1.0: 2 ports detected [ 1.185214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 1.185337] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.185341] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.185411] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.185511] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480 [ 1.185638] usb usb4: configuration #1 chosen from 1 choice [ 1.185711] hub 4-0:1.0: USB hub found [ 1.185776] hub 4-0:1.0: 2 ports detected [ 1.289254] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.289377] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.289380] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.289450] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 1.289544] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 [ 1.289669] usb usb5: configuration #1 chosen from 1 choice [ 1.289742] hub 5-0:1.0: USB hub found [ 1.289804] hub 5-0:1.0: 2 ports detected [ 1.393225] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.393361] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.393364] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.393436] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 1.393536] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080 [ 1.393660] usb usb6: configuration #1 chosen from 1 choice [ 1.393731] hub 6-0:1.0: USB hub found [ 1.393793] hub 6-0:1.0: 2 ports detected [ 1.425151] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.163349] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.163502] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 1.163505] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.163581] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 1.167567] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.167632] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 1.167635] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00 [ 1.215250] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.215416] usb usb7: configuration #1 chosen from 1 choice [ 1.215488] hub 7-0:1.0: USB hub found [ 1.215554] hub 7-0:1.0: 6 ports detected [ 1.319293] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 1.319439] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.319443] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.319516] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 1.323497] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.323562] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 1.323564] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800 [ 1.339225] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.339372] usb usb8: configuration #1 chosen from 1 choice [ 1.339451] hub 8-0:1.0: USB hub found [ 1.339514] hub 8-0:1.0: 6 ports detected [ 1.443419] ahci 0000:00:1f.2: version 3.0 [ 1.443440] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.945215] usb 3-1: device not accepting address 2, error -71 [ 2.241155] usb 7-5: new high speed USB device using ehci_hcd and address 2 [ 2.374187] usb 7-5: configuration #1 chosen from 1 choice [ 2.048022] usbcore: registered new interface driver libusual [ 2.385011] Initializing USB Mass Storage driver... [ 2.385142] scsi0 : SCSI emulation for USB Mass Storage devices [ 2.385965] usbcore: registered new interface driver usb-storage [ 2.386028] USB Mass Storage support registered. [ 2.052073] usb-storage: device found at 2 [ 2.052074] usb-storage: waiting for device to settle before scanning [ 2.447155] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.447242] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part [ 2.447327] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 2.447747] scsi1 : ahci [ 2.447922] scsi2 : ahci [ 2.448079] scsi3 : ahci [ 2.448235] scsi4 : ahci [ 2.448394] scsi5 : ahci [ 2.448551] scsi6 : ahci [ 2.448663] ata1: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff100 irq 19 [ 2.448737] ata2: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff180 irq 19 [ 2.448808] ata3: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff200 irq 19 [ 2.448879] ata4: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff280 irq 19 [ 2.448950] ata5: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff300 irq 19 [ 2.449021] ata6: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff380 irq 19 [ 2.923105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.290862] ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133 [ 3.290934] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 1) [ 3.291752] ata1.00: configured for UDMA/133 [ 3.267086] ata2: SATA link down (SStatus 0 SControl 300) [ 3.579069] ata3: SATA link down (SStatus 0 SControl 300) [ 3.891053] ata4: SATA link down (SStatus 0 SControl 300) [ 4.203034] ata5: SATA link down (SStatus 0 SControl 300) [ 4.515017] ata6: SATA link down (SStatus 0 SControl 300) [ 4.515163] scsi 1:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5 [ 4.515297] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 5.518940] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 5.519025] ahci 0000:02:00.0: flags: 64bit ncq led clo pmp pio [ 5.519096] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 5.519255] scsi7 : ahci [ 5.519425] scsi8 : ahci [ 5.519510] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 5.519583] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 5.838909] ata7: SATA link down (SStatus 0 SControl 300) [ 6.158891] ata8: SATA link down (SStatus 0 SControl 300) [ 6.159623] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 6.159763] PCI: Setting latency timer of device 0000:02:00.1 to 64 [ 6.160528] scsi9 : pata_jmicron [ 6.161032] scsi10 : pata_jmicron [ 6.161370] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 6.161433] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 6.500943] Driver ''sd'' needs updating - please use bus_type methods [ 6.501046] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 6.501118] sd 1:0:0:0: [sda] Write Protect is off [ 6.501180] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.501191] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 6.501293] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 6.501360] sd 1:0:0:0: [sda] Write Protect is off [ 6.501421] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.501432] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn''t support DPO or FUA [ 6.501508] sda: sda1 sda2 sda3 [ 6.520699] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.523368] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 6.479374] ata9.00: ATAPI: _NEC CD-ROM CD-3002B, C500, max UDMA/33 [ 6.837482] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.837556] EXT3-fs: write access will be enabled during recovery. [ 6.651354] ata9.00: configured for UDMA/33 [ 6.819220] scsi 9:0:0:0: CD-ROM _NEC CD-ROM CD-3002B C500 PQ: 0 ANSI: 5 [ 6.819345] scsi 9:0:0:0: Attached scsi generic sg1 type 5 [ 6.820677] 8139cp 0000:04:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 6.820757] 8139cp 0000:04:02.0: Try the "8139too" driver instead. [ 6.824588] 8139too Fast Ethernet driver 0.9.28 [ 6.824679] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 6.825672] eth0: RealTek RTL8139 at 0xe800, 00:50:fc:b0:df:a0, IRQ 21 [ 6.825734] eth0: Identified 8139 chip type ''RTL-8100B/8139D'' [ 6.829562] Driver ''sr'' needs updating - please use bus_type methods [ 6.831212] kjournald starting. Commit interval 5 seconds [ 7.165074] EXT3-fs: recovery complete. [ 7.165411] EXT3-fs: mounted filesystem with ordered data mode. [ 6.834085] sr0: scsi3-mmc drive: 1x/52x cd/rw xa/form2 cdda tray [ 6.834149] Uniform CD-ROM driver Revision: 3.20 [ 6.834232] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 7.384732] usb-storage: device scan complete [ 7.051368] scsi 0:0:0:0: Direct-Access WD 10EAVS External 1.65 PQ: 0 ANSI: 4 [ 7.052726] sd 0:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 7.053725] sd 0:0:0:0: [sdb] Write Protect is off [ 7.053795] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 7.053797] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 7.054849] sd 0:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 7.055848] sd 0:0:0:0: [sdb] Write Protect is off [ 7.055918] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 7.055920] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 7.055991] sdb:<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 12.639511] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.665262] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 12.692336] sdb1 sdb2 sdb3 sdb4 < sdb5<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.719699] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.738207] sdb6<6>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.419685] sdb7 sdb8 sdb9 sdb10<6>input: Power Button (FF) as /devices/virtual/input/input3 [ 12.498759] sdb11 sdb12 > [ 12.521028] sd 0:0:0:0: [sdb] Attached SCSI disk [ 12.521110] sd 0:0:0:0: Attached scsi generic sg2 type 0 [ 12.611495] ACPI: Power Button (FF) [PWRF] [ 12.611617] input: Power Button (CM) as /devices/virtual/input/input4 [ 12.675512] ACPI: Power Button (CM) [PWRB] [ 12.993231] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 13.617972] NET: Registered protocol family 10 [ 13.618250] lo: Disabled Privacy Extensions [ 14.067399] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input5 [ 14.984065] lp: driver loaded but no devices found [ 15.053560] loop: module loaded [ 15.166393] Adding 7815612k swap on /dev/sda2. Priority:-1 extents:1 across:7815612k [ 15.047671] EXT3 FS on sda1, internal journal [ 15.670832] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.138263] No dock devices found. [ 16.886922] ppdev: user-space parallel port driver [ 18.073744] Bridge firewalling registered [ 18.073883] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 17.852956] peth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 17.861197] device peth0 entered promiscuous mode [ 17.861202] audit(1223756191.311:2): dev=peth0 prom=256 old_prom=0 auid=4294967295 [ 18.202075] eth0: port 1(peth0) entering learning state [ 18.206016] eth0: topology change detected, propagating [ 18.206020] eth0: port 1(peth0) entering forwarding state [ 20.538400] Setting mem allocation to 3977724 kiB [ 22.326542] Bluetooth: Core ver 2.11 [ 22.326593] NET: Registered protocol family 31 [ 22.326594] Bluetooth: HCI device and connection mana ger initialized [ 22.326597] Bluetooth: HCI socket layer initialized [ 22.348728] Bluetooth: L2CAP ver 2.9 [ 22.348732] Bluetooth: L2CAP socket layer initialized [ 22.044712] Bluetooth: RFCOMM socket layer initialized [ 22.044722] Bluetooth: RFCOMM TTY layer initialized [ 22.044723] Bluetooth: RFCOMM ver 1.8 [ 25.368598] NET: Registered protocol family 17 [ 38.334563] peth0: no IPv6 routers present root@vdl-linux-10:/var/log/xen# _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Age_M
2008-Oct-12 09:16 UTC
Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.
Hi Anton, I am no VT-d expert, as I own an AMD X2 based system and there is no VT-d (IOMMU) available :-/ But I''ve found out [1] that you need to add a special option into your grub.conf / menu.lst to enable VT-d. In the kernel line (the one with xen.gz in it) you need to add iommu=1 to enable VT-d. I am not sure, but afaik there should be an option in the bios too, to enable VT-d. Hope this helps, Age_M [1] http://wiki.xensource.com/xenwiki/VTdHowTo _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Randy McAnally
2008-Oct-12 11:41 UTC
Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.
Pasi Kärkkäinen
2008-Oct-12 14:10 UTC
Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.
On Sun, Oct 12, 2008 at 07:41:01AM -0400, Randy McAnally wrote:> If you''re able to run Windows, then you must have VT-d enabled. >VT-d is different from VT. VT is needed for HVM guests, while VT-d provides PCI device passthrough support for HVM guests. If you have VT, it doesn''t mean you have VT-d. -- Pasi _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Todd Deshane
2008-Oct-12 20:37 UTC
Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.
Some answers inline.> If I "disable" the device on the kernel line with pciback.hide=(04:01.0), > this seems to work according to logging. However the device is still visible > with lspci in Dom0. Is this normal ?yes, that is normal> I am still not 100% convinced that my motherboard is VT-D compatible (BIOS > ?) However if I read other posts , the output of > ''/sys/hypervisor/properties/capabilities'' and ''/proc/cpuinfo'' should ensure > that the system is VT-D capable. Latest BIOS is installed. > Is there any tool to ''proof'' my system is VT-D capable ?There are BIOS options that you may need to turn on if you haven''t already. the ouput of ''xm dmesg'' should have a like IOMMU enabled> Any suggestions are welcome !Once you see the IOMMU enabled, you can run: xm pci-list-assignable-devices to see the devices that you can pass through. like others have suggested, make sure you follow http://wiki.xensource.com/xenwiki/VTdHowTo You may want to install a newer version of Xen, such as Xen 3.3.1 when it releases or simply run xen unstable or testing. Hope that helps, Cheers, Todd -- Todd Deshane http://todddeshane.net http://runningxen.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Randy McAnally
2008-Oct-12 23:08 UTC
Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.
My bad, sorry for the mix up. I tend to only deal with supermicro serverboards where I haven''t yet seen a board that supported HVM (vmx flag I believe) that didn''t have a "VT-d" enable/disable in the bios. Again, my apologies. -- Randy www.FastServ.com ---------- Original Message ----------- From: Gémes Géza <geza@kzsdabas.hu> To: xen-users@lists.xensource.com Cc: Randy McAnally <rsm@fast-serv.com>, anton <anton@vanderleun.com> Sent: Sun, 12 Oct 2008 15:24:09 +0200 Subject: Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.> Please do not confuse VT-D with HVM > > HVM=Run unmodified operating systems as DomUs (e.g. Windows) > VT-D=Pass PCI devices to unmodified operating systems (which expect > to have the memory start at the address 0x0) > > Nowadays there are plenty of motherboards/CPUs capable of HVM, but only > a few with VT-D capabilities. > > Geza > > If you''re able to run Windows, then you must have VT-d enabled. > > > > -- > > Randy > > www.FastServ.com <http://www.fastserv.com/> > > > > *---------- Original Message -----------* > > From: anton <anton@vanderleun.com> > > To: xen-users@lists.xensource.com > > Sent: Sat, 11 Oct 2008 23:38:24 +0200 > > Subject: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR > > with P45 chipset. > > > > > Hello everybody, > > > > > > > > > > > > > > I spend some time to get XEN up and running on ubuntu 8.04 > > > I am new to XEN > > > XEN is installed with “apt-get install ubuntu-xen-server” > > > Ultimate goal is to have hvm running with VT-D (PCI cards bounded > > to specific DomU’s) > > > > > > > > > > > > > > 4 Gb memory in MSI NEO3-FR motherboard with P45 chipset > > > Everything (except VT-D) is working smoothly > > > I can run all kind of OS’s in DomU’s (fedora, ubuntu, windows-XP, > > windows 2000 server etc) > > > It runs fast and it is very stable. > > > > > > > > > > > > > > Next step is to run asterisk in a domU (fedora 8) with its own ISDN > > card (Fritz Card). > > > However this is failing. > > > > > > > > > > > > > > If I start the DomU the following is displayed: > > > > > > > > > > > > > > root@vdl-linux-10:/etc/xen# xm create fedora8 > > > Using config file "./fedora8". > > > Error: Fail to assign device(4:1.0): maybe VT-d is not enabled, or > > the device is not exist, or it has already been assigned to other domain > > > root@vdl-linux-10: > > > > > > > > > > > > > > > > > > > > > > > > > Questiona arised to me: > > > > 1. If I “disable” the device on the kernel line with > > pciback.hide=(04:01.0), this seems to work according to logging. > > However the device is still visible with lspci in Dom0. Is this > > normal ? > > 2. I am still not 100% convinced that my motherboard is VT-D > > compatible (BIOS ?) However if I read other posts , the output > > of ‘/sys/hypervisor/properties/capabilities’ and ‘/proc/cpuinfo’ > > should ensure that the system is VT-D capable. Latest BIOS is > > installed. > > 3. Is there any tool to ‘proof’ my system is VT-D capable ? > > 4. Any suggestions are welcome ! > > > > > > > > > > > > > > > > > > Thanks in advance, > > > Anton > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > additional info: > > > > > > > > > > > > > > I have disabled all drivers in Dom0 so the card complety free as far > > as I can see with lsmod. > > > There is NO option in the Bios to enable/disable virtualization > > > > > > > > > > > > > > ==============LSPCI ====================> > > root@vdl-linux-10:/etc/xen# lspci > > > 00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller > > (rev 02) > > > 00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root > > Port (rev 02) > > > 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB > > UHCI Controller #4 > > > 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB > > UHCI Controller #5 > > > 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB > > UHCI Controller #6 > > > 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) > > USB2 EHCI Controller #2 > > > 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD > > Audio Controller > > > 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI > > Express Port 1 > > > 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI > > Express Port 2 > > > 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB > > UHCI Controller #1 > > > 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB > > UHCI Controller #2 > > > 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB > > UHCI Controller #3 > > > 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) > > USB2 EHCI Controller #1 > > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) > > > 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC > > Interface Controller > > > 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) > > SATA AHCI Controller > > > 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus > > Controller > > > 01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce > > 7300 GS] (rev a1) > > > 02:00.0 SATA controller: JMicron Technologies, Inc. JMicron > > 20360/20363 AHCI Controller (rev 03) > > > 02:00.1 IDE interface: JMicron Technologies, Inc. JMicron > > 20360/20363 AHCI Controller (rev 03) > > > 04:01.0 Network controller: AVM Audiovisuelles MKTG & Computer > > System GmbH Fritz!PCI v2.0 ISDN (rev 02) <-=-> > > 04:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > > root@vdl-linux-10:/etc/xen# > > > > > > > > > > > > > > ===============UNAME========> > > root@vdl-linux-10:/etc/xen# uname -a > > > Linux vdl-linux-10 2.6.24-19-xen #1 SMP Wed Aug 20 21:08:51 UTC 2008 > > x86_64 GNU/Linux > > > root@vdl-linux-10:/etc/xen# > > > > > > > > > > > > > > ===============CPUINFO=======> > > root@vdl-linux-10:/etc/xen# cat /proc/cpuinfo > > > processor : 0 > > > vendor_id : GenuineIntel > > > cpu family : 6 > > > model : 23 > > > model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz > > > stepping : 10 > > > cpu MHz : 3007.568 > > > cache size : 64 KB > > > physical id : 0 > > > siblings : 1 > > > core id : 0 > > > cpu cores : 1 > > > fpu : yes > > > fpu_exception : yes > > > cpuid level : 2 > > > wp : yes > > > flags : fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov > > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx > > lm constant_tsc pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 > > ssse3 cx16 xtpr sse4_1 lahf_lm > > > bogomips : 6016.91 > > > clflush size : 64 > > > cache_alignment : 64 > > > address sizes : 36 bits physical, 48 bits virtual > > > power management: > > > > > > > > > > > > > > processor : 0 > > > vendor_id : GenuineIntel > > > cpu family : 6 > > > model : 23 > > > model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz > > > stepping : 10 > > > cpu MHz : 3007.568 > > > cache size : 64 KB > > > physical id : 0 > > > siblings : 1 > > > core id : 0 > > > cpu cores : 1 > > > fpu : yes > > > fpu_exception : yes > > > cpuid level : 2 > > > wp : yes > > > flags : fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov > > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx > > lm constant_tsc pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 > > ssse3 cx16 xtpr sse4_1 lahf_lm > > > bogomips : 6016.91 > > > clflush size : 64 > > > cache_alignment : 64 > > > address sizes : 36 bits physical, 48 bits virtual > > > power management: > > > > > > > > > > > > > > root@vdl-linux-10:/etc/xen# > > > > > > > > > > > > > > ==============HYPERVISOR=========> > > root@vdl-linux-10:/etc/xen# cat > > /sys/hypervisor/properties/capabilities > > > xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p > > hvm-3.0-x86_64 > > > root@vdl-linux-10:/etc/xen# > > > > > > > > > > > > > > =============GRUB===========> > > title Xen 3.2 / Ubuntu 8.04.1, kernel 2.6.24-19-xen > > > root (hd0,0) > > > kernel /boot/xen-3.2.gz iommu=1 > > > module /boot/vmlinuz-2.6.24-19-xen > > root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 > > pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1 > > > module /boot/initrd.img-2.6.24-19-xen > > > quiet > > > > > > > > > > > > > > ============DOMU===============> > > kernel = "/usr/lib/xen/boot/hvmloader" > > > builder = ''hvm'' > > > extra =" iommu=soft swiotlb=force vtd=1" > > > memory = 1024 > > > name = "fedora8" > > > vcpus = 1 > > > vif = [ ''type=ioemu, bridge=xenbr0'' ] > > > disk = [ ''phy:/dev/sdb6,ioemu:hdb,w'',''phy:/dev/loop1,hda:cdrom,r'' ] > > > device_model = ''/usr/lib/xen/bin/qemu-dm'' > > > ne2000=0 > > > sdl=0 > > > vnc=1 > > > pci = [''0:4:1.0''] > > > boot=''c'' > > > > > > > > > > > > > > ============XEND LOG=============> > > > > > > > > > > > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:84) > > XendDomainInfo.create([''vm'', [''name'', ''fedora8''], [''memory'', 1024], > > [''vcpus'', 1], [''on_xend_start'', ''ignore''], [''on_xend_stop'', ''ignore''], > > [''image'', [''hvm'', [''kernel'', ''/usr/lib/xen/boot/hvmloader''], [''args'', > > '' iommu=soft swiotlb=force vtd=1''], [''device_model'', > > ''/usr/lib/xen/bin/qemu-dm''], [''pae'', 1], [''vcpus'', 1], [''boot'', ''c''], > > [''fda'', ''''], [''fdb'', ''''], [''timer_mode'', 0], [''localtime'', 0], > > [''serial'', ''''], [''stdvga'', 0], [''isa'', 0], [''nographic'', 0], > > [''soundhw'', ''''], [''vnc'', 1], [''vncunused'', 1], [''sdl'', 0], > > [''xauthority'', ''/root/.Xauthority''], [''rtc_timeoffset'', ''0''], > > [''monitor'', 0], [''acpi'', 1], [''apic'', 1], [''usb'', 0], [''usbdevice'', > > ''''], [''keymap'', ''''], [''pci'', [[''0x0'', ''0x4'', ''0x1'', ''0x0'']]], > > [''guest_os_type'', ''default'']]], [''device'', [''vbd'', [''uname'', > > ''phy:/dev/sdb6''], [''dev'', ''ioemu:hdb''], [''mode'', ''w'']]], [''device'', > > [''vbd'', [''uname'', ''phy:/dev/loop1''], [''dev'', ''hda:cdrom''], [''mode'', > > ''r'']]], [''device'', [''pci'', [''dev'', [''domain'', ''0x0''], [''bus'', ''0x4''], > > [''slot'', ''0x1''], [''func'', ''0x0'']]]], [''device'', [''vif'', [''bridge'', > > ''xenbr0''], [''type'', ''ioemu'']]]]) > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1637) > > XendDomainInfo.constructDomain > > > [2008-10-11 23:18:05 5437] DEBUG (balloon:151) Balloon: 131072 KiB > > free; need 2048; done. > > > [2008-10-11 23:18:05 5437] ERROR (XendDomainInfo:440) VM start failed > > > Traceback (most recent call last): > > > File > > "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line > > 419, in start > > > XendTask.log_progress(0, 30, self._constructDomain) > > > File "/usr/lib/python2.5/site-packages/xen/xend/XendTask.py", line > > 209, in log_progress > > > retval = func(*args, **kwds) > > > File > > "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line > > 1702, in _constructDomain > > > % (bus, dev, func)) > > > VmError: Fail to assign device(4:1.0): maybe VT-d is not enabled, or > > the device is not exist, or it has already been assigned to other domain > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1913) > > XendDomainInfo.destroy: domid=3 > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1930) > > XendDomainInfo.destroyDomain(3) > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1553) No device model > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1555) Releasing > > devices > > > [2008-10-11 23:18:05 5437] ERROR (XendDomainInfo:89) Domain > > construction failed > > > Traceback (most recent call last): > > > File > > "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line > > 87, in create > > > vm.start() > > > File > > "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line > > 419, in start > > > XendTask.log_progress(0, 30, self._constructDomain) > > > File "/usr/lib/python2.5/site-packages/xen/xend/XendTask.py", line > > 209, in log_progress > > > retval = func(*args, **kwds) > > > File > > "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line > > 1702, in _constructDomain > > > % (bus, dev, func)) > > > VmError: Fail to assign device(4:1.0): maybe VT-d is not enabled, or > > the device is not exist, or it has already been assigned to other domain > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1913) > > XendDomainInfo.destroy: domid=None > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1930) > > XendDomainInfo.destroyDomain(None) > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1553) No device model > > > [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1555) Releasing > > devices > > > > > > > > > > > > > > > > > > > > > > > > > ==================DMESG========================> > > root@vdl-linux-10:/var/log/xen# dmesg > > > [ 0.000000] Linux version 2.6.24-19-xen (buildd@king) (gcc > > version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 21:08:51 UTC > > 2008 (Ubuntu 2.6.24-4.6-generic) > > > [ 0.000000] Command line: > > root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 > > pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1 > > > [ 0.000000] BIOS-provided physical RAM map: > > > [ 0.000000] Xen: 0000000000000000 - 00000000f347f000 (usable) > > > [ 0.000000] Entering add_active_range(0, 0, 996479) 0 entries of > > 256 used > > > [ 0.000000] end_pfn_map = 996479 > > > [ 0.206239] DMI present. > > > [ 0.206303] Entering add_active_range(0, 0, 996479) 0 entries of > > 256 used > > > [ 0.216000] Zone PFN ranges: > > > [ 0.216001] DMA 0 -> 4096 > > > [ 0.216002] DMA32 4096 -> 1048576 > > > [ 0.216003] Normal 1048576 -> 1048576 > > > [ 0.216003] Movable zone start PFN for each node > > > [ 0.216004] early_node_map[1] active PFN ranges > > > [ 0.216005] 0: 0 -> 996479 > > > [ 0.216007] On node 0 totalpages: 996479 > > > [ 0.235583] DMA zone: 56 pages used for memmap > > > [ 0.235585] DMA zone: 0 pages reserved > > > [ 0.235587] DMA zone: 4040 pages, LIFO batch:0 > > > [ 0.235734] DMA32 zone: 13567 pages used for memmap > > > [ 0.235736] DMA32 zone: 978816 pages, LIFO batch:31 > > > [ 0.268166] Normal zone: 0 pages used for memmap > > > [ 0.268169] Movable zone: 0 pages used for memmap > > > [ 0.278090] ACPI: RSDP 000F9990, 0014 (r0 ACPIAM) > > > [ 0.278095] ACPI: RSDT BFF90000, 0040 (r1 7514MS A7514200 > > 20080829 MSFT 97) > > > [ 0.278099] ACPI: FACP BFF90200, 0084 (r1 7514MS A7514200 > > 20080829 MSFT 97) > > > [ 0.278104] ACPI: DSDT BFF905C0, 64FA (r1 A7514 A7514200 > > 200 INTL 20051117) > > > [ 0.278107] ACPI: FACS BFF9E000, 0040 > > > [ 0.278109] ACPI: APIC BFF90390, 006C (r1 7514MS A7514200 > > 20080829 MSFT 97) > > > [ 0.278112] ACPI: MCFG BFF90400, 003C (r1 7514MS OEMMCFG > > 20080829 MSFT 97) > > > [ 0.278115] ACPI: SLIC BFF90440, 0176 (r1 7514MS A7514200 > > 20080829 MSFT 97) > > > [ 0.278118] ACPI: OEMB BFF9E040, 0072 (r1 7514MS A7514200 > > 20080829 MSFT 97) > > > [ 0.278121] ACPI: HPET BFF985C0, 0038 (r1 7514MS OEMHPET > > 20080829 MSFT 97) > > > [ 0.278124] ACPI: SSDT BFF9E5C0, 0A7C (r1 DpgPmm CpuPm > > 12 INTL 20051117) > > > [ 0.278150] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > > > [ 0.278152] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > > > [ 0.278153] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > > > [ 0.278154] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > > > [ 0.278157] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > > > [ 0.278162] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 > > > [ 0.278164] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > [ 0.278166] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > > level) > > > [ 0.278167] ACPI: IRQ0 used by override. > > > [ 0.278168] ACPI: IRQ2 used by override. > > > [ 0.278169] ACPI: IRQ9 used by override. > > > [ 0.278171] Setting APIC routing to xen > > > [ 0.278172] Using ACPI (MADT) for SMP configuration information > > > [ 0.278179] Allocating PCI resources starting at c4000000 (gap: > > c0000000:3ee00000) > > > [ 0.278184] PERCPU: Allocating 22368 bytes of per cpu data > > > [ 0.278205] Built 1 zonelists in Zone order, mobility grouping > > on. Total pages: 982856 > > > [ 0.278207] Kernel command line: > > root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 > > pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1 > > > [ 0.278219] Unknown boot option `pciback.permissive'': ignoring > > > [ 0.278527] Initializing CPU#0 > > > [ 0.278674] PID hash table entries: 4096 (order: 12, 32768 bytes) > > > [ 0.278735] Xen reported: 3007.568 MHz processor. > > > [ 0.162979] console [xvc-1] enabled > > > [ 0.165005] Console: colour VGA+ 80x25 > > > [ 0.165007] console [tty0] enabled > > > [ 0.168556] Dentry cache hash table entries: 524288 (order: 10, > > 4194304 bytes) > > > [ 0.169665] Inode-cache hash table entries: 262144 (order: 9, > > 2097152 bytes) > > > [ 0.224988] Software IO TLB enabled: > > > [ 0.224989] Aperture: 64 megabytes > > > [ 0.224990] Kernel range: ffff880006a62000 - ffff88000aa62000 > > > [ 0.224990] Address size: 27 bits > > > [ 0.225226] PCI-DMA: Using software bounce buffering for IO > > (SWIOTLB) > > > [ 0.248802] Memory: 3805400k/3985916k available (2531k kernel > > code, 171588k reserved, 1329k data, 220k init) > > > [ 0.315024] Calibrating delay using timer specific routine.. > > 6016.91 BogoMIPS (lpj=12033823) > > > [ 0.315171] Security Framework initialized > > > [ 0.315233] SELinux: Disabled at boot. > > > [ 0.315294] AppArmor: AppArmor initialized > > > [ 0.315354] Failure registering capabilities with primary > > security module. > > > [ 0.315423] Mount-cache hash table entries: 256 > > > [ 0.315574] CPU: L1 I cache: 32K, L1 D cache: 32K > > > [ 0.315679] CPU: Physical Processor ID: 0 > > > [ 0.315737] CPU: Processor Core ID: 0 > > > [ 0.315797] SMP alternatives: switching to UP code > > > [ 0.316439] Early unpacking initramfs... done > > > [ 0.328893] ACPI: Core revision 20070126 > > > [ 0.329018] ACPI: Looking for DSDT in initramfs... error, file > > /DSDT.aml not found. > > > [ 0.330921] SMP alternatives: switching to SMP code > > > [ 0.331514] Brought up 2 CPUs > > > [ 0.000005] Initializing CPU#1 > > > [ 0.000024] CPU: L1 I cache: 32K, L1 D cache: 32K > > > [ 0.000027] CPU: Physical Processor ID: 0 > > > [ 0.000028] CPU: Processor Core ID: 0 > > > [ 0.331802] CPU0 attaching sched-domain: > > > [ 0.331803] domain 0: span 03 > > > [ 0.331804] groups: 01 02 > > > [ 0.331806] CPU1 attaching sched-domain: > > > [ 0.331807] domain 0: span 03 > > > [ 0.331807] groups: 02 01 > > > [ 0.332218] net_namespace: 120 bytes > > > [ 0.332277] failed to set up cpufreq notifier > > > [ 0.332595] Time: 20:16:13 Date: 10/11/08 > > > [ 0.332677] NET: Registered protocol family 16 > > > [ 0.332890] ACPI: bus type pci registered > > > [ 0.332995] PCI: Using configuration type 1 > > > [ 0.335427] ACPI: EC: Look up EC in DSDT > > > [ 0.337929] ACPI: Interpreter enabled > > > [ 0.337988] ACPI: (supports S0 S1 S3 S5) > > > [ 0.338221] ACPI: Using IOAPIC for interrupt routing > > > [ 0.338419] Error attaching device data > > > [ 0.338500] Error attaching device data > > > [ 0.338581] Error attaching device data > > > [ 0.338663] Error attaching device data > > > [ 0.342952] ACPI: PCI Root Bridge [PCI0] (0000:00) > > > [ 0.345258] PCI: Transparent bridge - 0000:00:1e.0 > > > [ 0.345360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > > [ 0.345448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > > > [ 0.345533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > > > [ 0.345589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] > > > [ 0.347633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 > > 12 14 15) > > > [ 0.348245] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) > > > [ 0.348510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 > > 12 *14 15) > > > [ 0.349121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 > > 12 14 *15) > > > [ 0.349732] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *6 7 10 11 > > 12 14 15) > > > [ 0.350341] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 > > 12 14 15) > > > [ 0.350952] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 > > 12 14 15) > > > [ 0.351567] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 > > 12 14 15) > > > [ 0.352192] ACPI Warning (tbutils-0217): Incorrect checksum in > > table [OEMB] - 5B, should be 5A [20070126] > > > [ 0.352359] Linux Plug and Play Support v0.97 (c) Adam Belay > > > [ 0.352438] pnp: PnP ACPI init > > > [ 0.352499] ACPI: bus type pnp registered > > > [ 0.354686] pnp: PnP ACPI: found 17 devices > > > [ 0.354745] ACPI: ACPI bus type pnp unregistered > > > [ 0.354803] xen_mem: Initialising balloon driver. > > > [ 0.355099] PCI: Using ACPI for IRQ routing > > > [ 0.355159] PCI: If a device doesn''t work, try "pci=routeirq". > > If it helps, post a report > > > [ 0.364241] NET: Registered protocol family 8 > > > [ 0.364311] NET: Registered protocol family 20 > > > [ 0.364433] AppArmor: AppArmor Filesystem Enabled > > > [ 0.364502] ACPI: RTC can wake from S4 > > > [ 0.036676] Time: xen clocksource has been installed. > > > [ 0.376266] system 00:01: iomem range 0xfed14000-0xfed19fff has > > been reserved > > > [ 0.376339] system 00:01: iomem range 0xfed90000-0xfed93fff has > > been reserved > > > [ 0.376416] system 00:07: ioport range 0x4c0-0x4ff has been reserved > > > [ 0.376476] system 00:07: ioport range 0x4d0-0x4d1 has been reserved > > > [ 0.376537] system 00:07: ioport range 0x800-0x87f has been reserved > > > [ 0.376597] system 00:07: ioport range 0x480-0x4bf has been reserved > > > [ 0.376657] system 00:07: iomem range 0xfed1c000-0xfed1ffff has > > been reserved > > > [ 0.376718] system 00:07: iomem range 0xfed20000-0xfed3ffff has > > been reserved > > > [ 0.376779] system 00:07: iomem range 0xfed40000-0xfed8ffff has > > been reserved > > > [ 0.376842] system 00:0a: iomem range 0xffc00000-0xffefffff could > > not be reserved > > > [ 0.376915] system 00:0b: iomem range 0xfec00000-0xfec00fff has > > been reserved > > > [ 0.376976] system 00:0b: iomem range 0xfee00000-0xfee00fff could > > not be reserved > > > [ 0.377050] system 00:0e: ioport range 0xa00-0xadf has been reserved > > > [ 0.377110] system 00:0e: ioport range 0xae0-0xaef has been reserved > > > [ 0.377172] system 00:0f: iomem range 0xe0000000-0xefffffff has > > been reserved > > > [ 0.377234] system 00:10: iomem range 0x0-0x9ffff could not be > > reserved > > > [ 0.377295] system 00:10: iomem range 0xc0000-0xcffff has been > > reserved > > > [ 0.377355] system 00:10: iomem range 0xe0000-0xfffff could not > > be reserved > > > [ 0.377416] system 00:10: iomem range 0x100000-0xbfffffff could > > not be reserved > > > [ 0.377486] system 00:10: iomem range 0xfed90000-0xffffffff could > > not be reserved > > > [ 0.377611] pciback 0000:04:01.0: seizing device > > <=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-> > > [ 0.377904] PCI: Bridge: 0000:00:01.0 > > > [ 0.377962] IO window: disabled. > > > [ 0.378022] MEM window: fc000000-fe9fffff > > > [ 0.378081] PREFETCH window: d0000000-dfffffff > > > [ 0.378142] PCI: Bridge: 0000:00:1c.0 > > > [ 0.378199] IO window: d000-dfff > > > [ 0.378260] MEM window: fea00000-feafffff > > > [ 0.378320] PREFETCH window: disabled. > > > [ 0.378382] PCI: Bridge: 0000:00:1c.1 > > > [ 0.378438] IO window: disabled. > > > [ 0.378498] MEM window: disabled. > > > [ 0.378558] PREFETCH window: disabled. > > > [ 0.378621] PCI: Bridge: 0000:00:1e.0 > > > [ 0.378679] IO window: e000-efff > > > [ 0.378742] MEM window: feb00000-febfffff > > > [ 0.378801] PREFETCH window: disabled. > > > [ 0.378877] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, > > low) -> IRQ 16 > > > [ 0.378993] PCI: Setting latency timer of device 0000:00:01.0 to 64 > > > [ 0.379020] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, > > low) -> IRQ 17 > > > [ 0.379137] PCI: Setting latency timer of device 0000:00:1c.0 to 64 > > > [ 0.379160] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, > > low) -> IRQ 16 > > > [ 0.379277] PCI: Setting latency timer of device 0000:00:1c.1 to 64 > > > [ 0.379291] PCI: Setting latency timer of device 0000:00:1e.0 to 64 > > > [ 0.379314] NET: Registered protocol family 2 > > > [ 0.412285] IP route cache hash table entries: 131072 (order: 8, > > 1048576 bytes) > > > [ 0.412614] TCP established hash table entries: 262144 (order: > > 10, 4194304 bytes) > > > [ 0.413602] TCP bind hash table entries: 65536 (order: 8, 1048576 > > bytes) > > > [ 0.413973] TCP: Hash tables configured (established 262144 bind > > 65536) > > > [ 0.414033] TCP reno registered > > > [ 0.424352] checking if image is initramfs... it is > > > [ 0.440113] Freeing initrd memory: 23684k freed > > > [ 0.447005] audit: initializing netlink socket (disabled) > > > [ 0.447082] audit(1223756173.560:1): initialized > > > [ 0.447394] VFS: Disk quotas dquot_6.5.1 > > > [ 0.447467] Dquot-cache hash table entries: 512 (order 0, 4096 > > bytes) > > > [ 0.447581] io scheduler noop registered > > > [ 0.447640] io scheduler anticipatory registered > > > [ 0.447698] io scheduler deadline registered > > > [ 0.447763] io scheduler cfq registered (default) > > > [ 0.447968] Boot video device is 0000:01:00.0 > > > [ 0.448049] PCI: Setting latency timer of device 0000:00:01.0 to 64 > > > [ 0.448118] assign_interrupt_mode Found MSI capability > > > [ 0.448178] Allocate Port Service[0000:00:01.0:pcie00] > > > [ 0.448285] PCI: Setting latency timer of device 0000:00:1c.0 to 64 > > > [ 0.448347] assign_interrupt_mode Found MSI capability > > > [ 0.448408] Allocate Port Service[0000:00:1c.0:pcie00] > > > [ 0.448428] Allocate Port Service[0000:00:1c.0:pcie02] > > > [ 0.448518] PCI: Setting latency timer of device 0000:00:1c.1 to 64 > > > [ 0.448577] assign_interrupt_mode Found MSI capability > > > [ 0.448636] Allocate Port Service[0000:00:1c.1:pcie00] > > > [ 0.448654] Allocate Port Service[0000:00:1c.1:pcie02] > > > [ 0.448865] Xen virtual console successfully installed as xvc0 > > > [ 0.448954] Event-channel device installed. > > > [ 0.453636] Successfully initialized TPM backend driver. > > > [ 0.453815] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 20 (level, > > low) -> IRQ 20 > > > [ 0.453934] ACPI: PCI interrupt for device 0000:04:01.0 disabled > > <-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-> > > [ 0.470001] Real Time Clock Driver v1.12ac > > > [ 0.470186] hpet_acpi_add: no address or irqs in _CRS > > > [ 0.470270] Linux agpgart interface v0.102 > > > [ 0.470669] RAMDISK driver initialized: 16 RAM disks of 65536K > > size 1024 blocksize > > > [ 0.470779] input: Macintosh mouse button emulation as > > /devices/virtual/input/input0 > > > [ 0.470913] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > > 0x60,0x64 irq 1,12 > > > [ 0.473091] serio: i8042 KBD port at 0x60,0x64 irq 1 > > > [ 0.473153] serio: i8042 AUX port at 0x60,0x64 irq 12 > > > [ 0.484304] mice: PS/2 mouse device common for all mice > > > [ 0.484406] cpuidle: using governor ladder > > > [ 0.484510] NET: Registered protocol family 1 > > > [ 0.484603] registered taskstats version 1 > > > [ 0.484722] Magic number: 12:691:295 > > > [ 0.484783] hash matches device ttyz9 > > > [ 0.484840] hash matches device ttywc > > > [ 0.484913] hash matches device tty28 > > > [ 0.484982] > > /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/rtc/hctosys.c:> > unable to open rtc device (rtc0) > > > [ 0.485062] Freeing unused kernel memory: 220k freed > > > [ 0.511687] input: AT Translated Set 2 keyboard as > > /devices/platform/i8042/serio0/input/input1 > > > [ 0.336985] fuse init (API version 7.9) > > > [ 0.679253] ACPI: SSDT BFF9E0C0, 0277 (r1 DpgPmm P001Ist > > 11 INTL 20051117) > > > [ 0.679680] ACPI: SSDT BFF9E340, 0277 (r1 DpgPmm P002Ist > > 12 INTL 20051117) > > > [ 0.679984] ACPI Exception (processor_core-0816): AE_NOT_FOUND, > > Processor Device is not present [20070126] > > > [ 0.680150] ACPI Exception (processor_core-0816): AE_NOT_FOUND, > > Processor Device is not present [20070126] > > > [ 0.860971] usbcore: registered new interface driver usbfs > > > [ 0.861048] usbcore: registered new interface driver hub > > > [ 0.866625] usbcore: registered new device driver usb > > > [ 0.872827] USB Universal Host Controller Interface driver v3.0 > > > [ 0.872926] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, > > low) -> IRQ 16 > > > [ 0.873047] PCI: Setting latency timer of device 0000:00:1a.0 to 64 > > > [ 0.873051] uhci_hcd 0000:00:1a.0: UHCI Host Controller > > > [ 0.873299] uhci_hcd 0000:00:1a.0: new USB bus registered, > > assigned bus number 1 > > > [ 0.873402] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00 > > > [ 0.873540] usb usb1: configuration #1 chosen from 1 choice > > > [ 0.873611] hub 1-0:1.0: USB hub found > > > [ 0.873674] hub 1-0:1.0: 2 ports detected > > > [ 0.562427] SCSI subsystem initialized > > > [ 0.570373] libata version 3.00 loaded. > > > [ 0.605484] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) > > > [ 0.977362] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, > > low) -> IRQ 21 > > > [ 0.977486] PCI: Setting latency timer of device 0000:00:1a.1 to 64 > > > [ 0.977489] uhci_hcd 0000:00:1a.1: UHCI Host Controller > > > [ 0.977561] uhci_hcd 0000:00:1a.1: new USB bus registered, > > assigned bus number 2 > > > [ 0.977663] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880 > > > [ 0.977795] usb usb2: configuration #1 chosen from 1 choice > > > [ 0.977867] hub 2-0:1.0: USB hub found > > > [ 0.977929] hub 2-0:1.0: 2 ports detected > > > [ 1.081227] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, > > low) -> IRQ 19 > > > [ 1.081352] PCI: Setting latency timer of device 0000:00:1a.2 to 64 > > > [ 1.081356] uhci_hcd 0000:00:1a.2: UHCI Host Controller > > > [ 1.081428] uhci_hcd 0000:00:1a.2: new USB bus registered, > > assigned bus number 3 > > > [ 1.081529] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c800 > > > [ 1.081689] usb usb3: configuration #1 chosen from 1 choice > > > [ 1.081760] hub 3-0:1.0: USB hub found > > > [ 1.081862] hub 3-0:1.0: 2 ports detected > > > [ 1.185214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, > > low) -> IRQ 23 > > > [ 1.185337] PCI: Setting latency timer of device 0000:00:1d.0 to 64 > > > [ 1.185341] uhci_hcd 0000:00:1d.0: UHCI Host Controller > > > [ 1.185411] uhci_hcd 0000:00:1d.0: new USB bus registered, > > assigned bus number 4 > > > [ 1.185511] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480 > > > [ 1.185638] usb usb4: configuration #1 chosen from 1 choice > > > [ 1.185711] hub 4-0:1.0: USB hub found > > > [ 1.185776] hub 4-0:1.0: 2 ports detected > > > [ 1.289254] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, > > low) -> IRQ 19 > > > [ 1.289377] PCI: Setting latency timer of device 0000:00:1d.1 to 64 > > > [ 1.289380] uhci_hcd 0000:00:1d.1: UHCI Host Controller > > > [ 1.289450] uhci_hcd 0000:00:1d.1: new USB bus registered, > > assigned bus number 5 > > > [ 1.289544] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 > > > [ 1.289669] usb usb5: configuration #1 chosen from 1 choice > > > [ 1.289742] hub 5-0:1.0: USB hub found > > > [ 1.289804] hub 5-0:1.0: 2 ports detected > > > [ 1.393225] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, > > low) -> IRQ 18 > > > [ 1.393361] PCI: Setting latency timer of device 0000:00:1d.2 to 64 > > > [ 1.393364] uhci_hcd 0000:00:1d.2: UHCI Host Controller > > > [ 1.393436] uhci_hcd 0000:00:1d.2: new USB bus registered, > > assigned bus number 6 > > > [ 1.393536] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080 > > > [ 1.393660] usb usb6: configuration #1 chosen from 1 choice > > > [ 1.393731] hub 6-0:1.0: USB hub found > > > [ 1.393793] hub 6-0:1.0: 2 ports detected > > > [ 1.425151] usb 3-1: new full speed USB device using uhci_hcd and > > address 2 > > > [ 1.163349] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, > > low) -> IRQ 18 > > > [ 1.163502] PCI: Setting latency timer of device 0000:00:1a.7 to 64 > > > [ 1.163505] ehci_hcd 0000:00:1a.7: EHCI Host Controller > > > [ 1.163581] ehci_hcd 0000:00:1a.7: new USB bus registered, > > assigned bus number 7 > > > [ 1.167567] ehci_hcd 0000:00:1a.7: debug port 1 > > > [ 1.167632] PCI: cache line size of 32 is not supported by device > > 0000:00:1a.7 > > > [ 1.167635] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00 > > > [ 1.215250] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, > > driver 10 Dec 2004 > > > [ 1.215416] usb usb7: configuration #1 chosen from 1 choice > > > [ 1.215488] hub 7-0:1.0: USB hub found > > > [ 1.215554] hub 7-0:1.0: 6 ports detected > > > [ 1.319293] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, > > low) -> IRQ 23 > > > [ 1.319439] PCI: Setting latency timer of device 0000:00:1d.7 to 64 > > > [ 1.319443] ehci_hcd 0000:00:1d.7: EHCI Host Controller > > > [ 1.319516] ehci_hcd 0000:00:1d.7: new USB bus registered, > > assigned bus number 8 > > > [ 1.323497] ehci_hcd 0000:00:1d.7: debug port 1 > > > [ 1.323562] PCI: cache line size of 32 is not supported by device > > 0000:00:1d.7 > > > [ 1.323564] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800 > > > [ 1.339225] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, > > driver 10 Dec 2004 > > > [ 1.339372] usb usb8: configuration #1 chosen from 1 choice > > > [ 1.339451] hub 8-0:1.0: USB hub found > > > [ 1.339514] hub 8-0:1.0: 6 ports detected > > > [ 1.443419] ahci 0000:00:1f.2: version 3.0 > > > [ 1.443440] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, > > low) -> IRQ 19 > > > [ 1.945215] usb 3-1: device not accepting address 2, error -71 > > > [ 2.241155] usb 7-5: new high speed USB device using ehci_hcd and > > address 2 > > > [ 2.374187] usb 7-5: configuration #1 chosen from 1 choice > > > [ 2.048022] usbcore: registered new interface driver libusual > > > [ 2.385011] Initializing USB Mass Storage driver... > > > [ 2.385142] scsi0 : SCSI emulation for USB Mass Storage devices > > > [ 2.385965] usbcore: registered new interface driver usb-storage > > > [ 2.386028] USB Mass Storage support registered. > > > [ 2.052073] usb-storage: device found at 2 > > > [ 2.052074] usb-storage: waiting for device to settle before > > scanning > > > [ 2.447155] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 > > Gbps 0x3f impl SATA mode > > > [ 2.447242] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led > > clo pio slum part > > > [ 2.447327] PCI: Setting latency timer of device 0000:00:1f.2 to 64 > > > [ 2.447747] scsi1 : ahci > > > [ 2.447922] scsi2 : ahci > > > [ 2.448079] scsi3 : ahci > > > [ 2.448235] scsi4 : ahci > > > [ 2.448394] scsi5 : ahci > > > [ 2.448551] scsi6 : ahci > > > [ 2.448663] ata1: SATA max UDMA/133 abar m2048@0xfbfff000 port > > 0xfbfff100 irq 19 > > > [ 2.448737] ata2: SATA max UDMA/133 abar m2048@0xfbfff000 port > > 0xfbfff180 irq 19 > > > [ 2.448808] ata3: SATA max UDMA/133 abar m2048@0xfbfff000 port > > 0xfbfff200 irq 19 > > > [ 2.448879] ata4: SATA max UDMA/133 abar m2048@0xfbfff000 port > > 0xfbfff280 irq 19 > > > [ 2.448950] ata5: SATA max UDMA/133 abar m2048@0xfbfff000 port > > 0xfbfff300 irq 19 > > > [ 2.449021] ata6: SATA max UDMA/133 abar m2048@0xfbfff000 port > > 0xfbfff380 irq 19 > > > [ 2.923105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > > [ 3.290862] ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max > > UDMA/133 > > > [ 3.290934] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 1) > > > [ 3.291752] ata1.00: configured for UDMA/133 > > > [ 3.267086] ata2: SATA link down (SStatus 0 SControl 300) > > > [ 3.579069] ata3: SATA link down (SStatus 0 SControl 300) > > > [ 3.891053] ata4: SATA link down (SStatus 0 SControl 300) > > > [ 4.203034] ata5: SATA link down (SStatus 0 SControl 300) > > > [ 4.515017] ata6: SATA link down (SStatus 0 SControl 300) > > > [ 4.515163] scsi 1:0:0:0: Direct-Access ATA WDC > > WD3200KS-00P 21.0 PQ: 0 ANSI: 5 > > > [ 4.515297] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, > > low) -> IRQ 16 > > > [ 5.518940] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 > > Gbps 0x3 impl SATA mode > > > [ 5.519025] ahci 0000:02:00.0: flags: 64bit ncq led clo pmp pio > > > [ 5.519096] PCI: Setting latency timer of device 0000:02:00.0 to 64 > > > [ 5.519255] scsi7 : ahci > > > [ 5.519425] scsi8 : ahci > > > [ 5.519510] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port > > 0xfeafe100 irq 16 > > > [ 5.519583] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port > > 0xfeafe180 irq 16 > > > [ 5.838909] ata7: SATA link down (SStatus 0 SControl 300) > > > [ 6.158891] ata8: SATA link down (SStatus 0 SControl 300) > > > [ 6.159623] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, > > low) -> IRQ 17 > > > [ 6.159763] PCI: Setting latency timer of device 0000:02:00.1 to 64 > > > [ 6.160528] scsi9 : pata_jmicron > > > [ 6.161032] scsi10 : pata_jmicron > > > [ 6.161370] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma > > 0xd400 irq 17 > > > [ 6.161433] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma > > 0xd408 irq 17 > > > [ 6.500943] Driver ''sd'' needs updating - please use bus_type methods > > > [ 6.501046] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors > > (320073 MB) > > > [ 6.501118] sd 1:0:0:0: [sda] Write Protect is off > > > [ 6.501180] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > [ 6.501191] sd 1:0:0:0: [sda] Write cache: enabled, read cache: > > enabled, doesn''t support DPO or FUA > > > [ 6.501293] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors > > (320073 MB) > > > [ 6.501360] sd 1:0:0:0: [sda] Write Protect is off > > > [ 6.501421] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > [ 6.501432] sd 1:0:0:0: [sda] Write cache: enabled, read cache: > > enabled, doesn''t support DPO or FUA > > > [ 6.501508] sda: sda1 sda2 sda3 > > > [ 6.520699] sd 1:0:0:0: [sda] Attached SCSI disk > > > [ 6.523368] sd 1:0:0:0: Attached scsi generic sg0 type 0 > > > [ 6.479374] ata9.00: ATAPI: _NEC CD-ROM CD-3002B, C500, max UDMA/33 > > > [ 6.837482] EXT3-fs: INFO: recovery required on readonly filesystem. > > > [ 6.837556] EXT3-fs: write access will be enabled during recovery. > > > [ 6.651354] ata9.00: configured for UDMA/33 > > > [ 6.819220] scsi 9:0:0:0: CD-ROM _NEC CD-ROM > > CD-3002B C500 PQ: 0 ANSI: 5 > > > [ 6.819345] scsi 9:0:0:0: Attached scsi generic sg1 type 5 > > > [ 6.820677] 8139cp 0000:04:02.0: This (id 10ec:8139 rev 10) is > > not an 8139C+ compatible chip > > > [ 6.820757] 8139cp 0000:04:02.0: Try the "8139too" driver instead. > > > [ 6.824588] 8139too Fast Ethernet driver 0.9.28 > > > [ 6.824679] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, > > low) -> IRQ 21 > > > [ 6.825672] eth0: RealTek RTL8139 at 0xe800, 00:50:fc:b0:df:a0, > > IRQ 21 > > > [ 6.825734] eth0: Identified 8139 chip type ''RTL-8100B/8139D'' > > > [ 6.829562] Driver ''sr'' needs updating - please use bus_type methods > > > [ 6.831212] kjournald starting. Commit interval 5 seconds > > > [ 7.165074] EXT3-fs: recovery complete. > > > [ 7.165411] EXT3-fs: mounted filesystem with ordered data mode. > > > [ 6.834085] sr0: scsi3-mmc drive: 1x/52x cd/rw xa/form2 cdda tray > > > [ 6.834149] Uniform CD-ROM driver Revision: 3.20 > > > [ 6.834232] sr 9:0:0:0: Attached scsi CD-ROM sr0 > > > [ 7.384732] usb-storage: device scan complete > > > [ 7.051368] scsi 0:0:0:0: Direct-Access WD 10EAVS > > External 1.65 PQ: 0 ANSI: 4 > > > [ 7.052726] sd 0:0:0:0: [sdb] 1953525168 512-byte hardware > > sectors (1000205 MB) > > > [ 7.053725] sd 0:0:0:0: [sdb] Write Protect is off > > > [ 7.053795] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00 > > > [ 7.053797] sd 0:0:0:0: [sdb] Assuming drive cache: write through > > > [ 7.054849] sd 0:0:0:0: [sdb] 1953525168 512-byte hardware > > sectors (1000205 MB) > > > [ 7.055848] sd 0:0:0:0: [sdb] Write Protect is off > > > [ 7.055918] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00 > > > [ 7.055920] sd 0:0:0:0: [sdb] Assuming drive cache: write through > > > [ 7.055991] sdb:<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > > > [ 12.639511] shpchp: Standard Hot Plug PCI Controller Driver > > version: 0.4 > > > [ 12.665262] input: PC Speaker as > > /devices/platform/pcspkr/input/input2 > > > [ 12.692336] sdb1 sdb2 sdb3 sdb4 < sdb5<6>Serial: 8250/16550 > > driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > > > [ 12.719699] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > > [ 12.738207] sdb6<6>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > > [ 12.419685] sdb7 sdb8 sdb9 sdb10<6>input: Power Button (FF) as > > /devices/virtual/input/input3 > > > [ 12.498759] sdb11 sdb12 > > > > [ 12.521028] sd 0:0:0:0: [sdb] Attached SCSI disk > > > [ 12.521110] sd 0:0:0:0: Attached scsi generic sg2 type 0 > > > [ 12.611495] ACPI: Power Button (FF) [PWRF] > > > [ 12.611617] input: Power Button (CM) as > > /devices/virtual/input/input4 > > > [ 12.675512] ACPI: Power Button (CM) [PWRB] > > > [ 12.993231] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 > > > [ 13.617972] NET: Registered protocol family 10 > > > [ 13.618250] lo: Disabled Privacy Extensions > > > [ 14.067399] input: ImExPS/2 Logitech MX Mouse as > > /devices/platform/i8042/serio1/input/input5 > > > [ 14.984065] lp: driver loaded but no devices found > > > [ 15.053560] loop: module loaded > > > [ 15.166393] Adding 7815612k swap on /dev/sda2. Priority:-1 > > extents:1 across:7815612k > > > [ 15.047671] EXT3 FS on sda1, internal journal > > > [ 15.670832] ip_tables: (C) 2000-2006 Netfilter Core Team > > > [ 16.138263] No dock devices found. > > > [ 16.886922] ppdev: user-space parallel port driver > > > [ 18.073744] Bridge firewalling registered > > > [ 18.073883] tmpbridge: Dropping NETIF_F_UFO since no > > NETIF_F_HW_CSUM feature. > > > [ 17.852956] peth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 > > > [ 17.861197] device peth0 entered promiscuous mode > > > [ 17.861202] audit(1223756191.311:2): dev=peth0 prom=256 > > old_prom=0 auid=4294967295 > > > [ 18.202075] eth0: port 1(peth0) entering learning state > > > [ 18.206016] eth0: topology change detected, propagating > > > [ 18.206020] eth0: port 1(peth0) entering forwarding state > > > [ 20.538400] Setting mem allocation to 3977724 kiB > > > [ 22.326542] Bluetooth: Core ver 2.11 > > > [ 22.326593] NET: Registered protocol family 31 > > > [ 22.326594] Bluetooth: HCI device and connection mana ger > > initialized > > > [ 22.326597] Bluetooth: HCI socket layer initialized > > > [ 22.348728] Bluetooth: L2CAP ver 2.9 > > > [ 22.348732] Bluetooth: L2CAP socket layer initialized > > > [ 22.044712] Bluetooth: RFCOMM socket layer initialized > > > [ 22.044722] Bluetooth: RFCOMM TTY layer initialized > > > [ 22.044723] Bluetooth: RFCOMM ver 1.8 > > > [ 25.368598] NET: Registered protocol family 17 > > > [ 38.334563] peth0: no IPv6 routers present > > > root@vdl-linux-10:/var/log/xen# > > > > > > > > > > > > > *------- End of Original Message -------* > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users------- End of Original Message ------- _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users