On Thu, Sep 11, 2008 at 02:03:26AM -0700, Kip Macy wrote:
> Does anyone know what the peak numbers are (bandwith, pps, and
> latency) for
>
> 1) fully virtualized
>
> 2) para-virtualized (netback)
>
> 3) VT-d passthrough
Like most everything else, it depends on your setup. The most
important parameter is probably your network: 1GbE or 10GbE? For 1GbE,
as a rule-of-thumb, fully-virtualized can''t fill the pipe,
para-virtualized can fill the pipe but has a much higher CPU
utilization than native, and passthrough is pretty close to native in
all parameters, assuming a direct-mapping strategy.
Cheers,
Muli
--
Workshop on I/O Virtualization (WIOV ''08)
Co-located with OSDI ''08, Dec 2008, San Diego, CA
http://www.usenix.org/wiov08
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users