Hello,
I have a 3ware 9550SX SATA-RAID controller with 6 SATA disk.
I wants to get information for manage disks on my dom0 OS. For this I
wants to use the 3ware tw_cli. But I have this error message :
geppo:/usr/src# tw_cli
//geppo> info
(0x0B:0x0001): No controller
No controller found.
Make sure appropriate AMCC/3ware device driver(s) are loaded.
but modules are loaded, my dmesg :
3w-9xxx: scsi0: AEN: WARNING (0x04:0x0006): Incomplete unit detected:unit=1.
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xda100000,
IRQ: 21.
3w-9xxx: scsi0: Firmware FE9X 3.04.00.005, BIOS BE9X 3.04.00.002, Ports: 8.
Vendor: AMCC Model: 9550SXU-8L DISK Rev: 3.04
Type: Direct-Access ANSI SCSI revision: 03
My kernel is a 2.6.18.8 (compiled) and I use 3.1.4 Xen version
(compiled) on a Debian Etch.
When I do the same in a debian standard kernel :
geppo:~# tw_cli
//geppo> info
Ctl Model (V)Ports Drives Units NotOpt RRate VRate BBU
------------------------------------------------------------------------
c0 9550SXU-8LP 8 6 2 1 1 1
-
//geppo>
I compiled the two kernels with the same .config file.
lsmod on standard Debian kernel
ipv6 226272 18
button 6672 0
ac 5188 0
battery 9636 0
loop 15048 0
serio_raw 6660 0
usbhid 37248 0
parport_pc 32132 0
parport 33256 1 parport_pc
rtc 12372 0
i2c_i801 7468 0
psmouse 35016 0
i2c_core 19680 1 i2c_i801
shpchp 33024 0
pci_hotplug 28704 1 shpchp
evdev 9088 0
ext3 119240 4
jbd 52456 1 ext3
mbcache 8356 1 ext3
dm_mirror 19152 0
dm_snapshot 15552 0
dm_mod 50232 16 dm_mirror,dm_snapshot
ata_piix 13896 0
libata 89396 1 ata_piix
sd_mod 19040 7
e1000 108832 0
3w_9xxx 30372 6
scsi_mod 124168 3 libata,sd_mod,3w_9xxx
generic 4868 0 [permanent]
ide_core 110504 1 generic
uhci_hcd 21164 0
ehci_hcd 28136 0
usbcore 112644 4 usbhid,uhci_hcd,ehci_hcd
thermal 13608 0
processor 28840 1 thermal
fan 4804 0
lsmod on xen kernel :
Module Size Used by
xt_physdev 3984 4
iptable_filter 4096 1
ip_tables 14180 1 iptable_filter
x_tables 14340 2 xt_physdev,ip_tables
bridge 50716 1 xt_physdev
ipv6 233376 26
button 7696 0
ac 6276 0
battery 10756 0
loop 16520 0
parport_pc 33572 0
parport 34504 1 parport_pc
serio_raw 7684 0
serial_core 21120 0
rtc 14260 0
usbhid 39136 0
psmouse 36488 0
shpchp 34208 0
pci_hotplug 30016 1 shpchp
evdev 10112 0
ext3 122376 4
jbd 54312 1 ext3
mbcache 9348 1 ext3
dm_mirror 20688 0
dm_snapshot 16800 0
dm_mod 52120 22 dm_mirror,dm_snapshot
sd_mod 20224 7
generic 6020 0 [permanent]
ide_core 116424 1 generic
3w_9xxx 31748 8
scsi_mod 126856 2 sd_mod,3w_9xxx
uhci_hcd 22924 0
e1000 111936 0
ehci_hcd 30216 0
usbcore 117380 4 usbhid,uhci_hcd,ehci_hcd
thermal 14728 0
processor 30152 1 thermal
fan 5892 0
Thanks for your help.
--
''''~``
( o o )
+------------------.oooO--(_)--Oooo.---------------------+
| Guillaume Chéramy - Guidtz |
| E-Mail : guillaume.cheramy@gmail.com |
| ( ) |
+---------------------\ (----( )-----------------------+
\_) ) /
(_/
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Grant McWilliams
2008-Aug-01 16:11 UTC
Re: [Xen-users] tw_cli doesn''t work on dom0 kernel
On Fri, Aug 1, 2008 at 5:37 AM, CHERAMY Guillaume < guillaume.cheramy@gmail.com> wrote:> Hello, > > I have a 3ware 9550SX SATA-RAID controller with 6 SATA disk. > I wants to get information for manage disks on my dom0 OS. For this I > wants to use the 3ware tw_cli. But I have this error message : > > geppo:/usr/src# tw_cli > //geppo> info > (0x0B:0x0001): No controller > No controller found. > Make sure appropriate AMCC/3ware device driver(s) are loaded. >I don''t have an answer to your question as of yet but I''ll be installing a 9550SX in my Xen machine tomorrow or the next day so maybe I''ll see. Grant McWilliams _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users