Hi all,
I''m currently experiencing some problems with the network connection of
a HVM domU. I''m using xen 3.0.3-1 on a debian etch box and have to use
the routing configuration (but bridging does not work either)
Booting the domU works fine, but I can not ping dom0 -> domU neither
domU -> dom0. Although the transmit counter is incremented in the domU,
no packets are received; the vif device in dom0 shows no
sent/received/dropped packets.
In the logs I found the following suspect messages:
/var/log/syslog> ...
> ADDRCONF(NETDEV_UP): vif9.0: link is not ready
> ...
=> what exactly does this mean?
> $ ip link
> ...
> 35: vif9.0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue
> link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
I think, the problem is this ''NO-CARRIER'' flag for the vif
device.
Any hints how to fix this problem?
btw: other, non-HVM domains work well.
best regards,
quam
--
Markus Quaritsch
E: quam@qwws.net
W: www.qwws.net
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
