Michele Castigliego
2008-Apr-25 12:48 UTC
[Xen-users] network-nat whit qemu-dm not working
Hello,
please take a coffee (or beer) and read this, I''m having troubles
here..
I''m using the following system:
Debian etch 4.0-r3
xen-hypervisor-3.2-1-i386 (The same appens with 3.0)
linux-image-2.6.18-6-xen-vserver-686
Dom0 is a machine with two network interfaces:
eth0 connected to Internet
eth1 connected to local network
On this system I run DNS and DHCP for the local network and I''ve set
the
NAT for the Internet navigation. A simplified iptables rules is shown:
### iptables -L ###
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT 0 -- anywhere anywhere state NEW
Chain FORWARD (policy DROP)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT 0 -- anywhere anywhere state NEW
Chain OUTPUT (policy DROP)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT 0 -- anywhere anywhere state NEW
### iptables -t nat -L ###
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
SNAT 0 -- 192.168.0.0/24 anywhere
to:192.168.1.254
SNAT 0 -- 10.0.0.0/16 anywhere
to:192.168.1.254
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
I would like to use my Dom0 as the firewall for the local network and
DomUs, and access DomUs machine from the local network.
I''ve setup this xend-config.sxp:
(network-script network-dummy)
(network-script ''network-nat netdev=eth1'')
(vif-script ''vif-nat dhcp=yes'')
(dom0-min-mem 512)
(dom0-cpus 0)
(vnc-listen ''0.0.0.0'')
## DomU xen-etch.cfg from an example:
kernel = ''/boot/vmlinuz-2.6.18-6-xen-vserver-686''
ramdisk = ''/boot/initrd.img-2.6.18-6-xen-vserver-686''
memory = ''512''
root = ''/dev/sda1 ro''
disk [
''file:/home/xen/domains/xen-etch/disk.img,sda1,w'',''file:/home/xen/domains/xen-etch/swap.img,sda2,w''
]
name = ''xen-etch''
dhcp = ''dhcp''
vif = [ '''' ]
on_poweroff = ''destroy''
on_reboot = ''restart''
on_crash = ''restart''
## DomU win.cfg from an example:
kernel = ''/usr/lib/xen-3.2-1/boot/hvmloader''
builder = ''hvm''
memory = ''512''
device_model=''/usr/lib/xen-3.2-1/bin/qemu-dm''
disk=[
''file:/root/win_vm.img,ioemu:hda,w'',''file:/root/WINXP.iso,ioemu:hdc:cdrom,r''
]
name = ''win01''
vif = [''type=ioemu, vifname=wif_win'']
dhcp = ''dhcp''
usbdevice="tablet"
boot=''d''
vnc=1
vncviewer=1
vncunused=0
sdl=0
I''ve commented out qemu-ifup because of NAT:
#ifconfig $1 0.0.0.0 up
#brctl addif $2 $1
After DomUs starting this is my iptables -L shown:
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT 0 -- anywhere anywhere state NEW
Chain FORWARD (policy DROP)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT 0 -- anywhere anywhere state NEW
ACCEPT 0 -- 10.0.0.0/16 anywhere PHYSDEV
match --physdev-in vif8.0
ACCEPT udp -- anywhere anywhere PHYSDEV
match --physdev-in vif8.0 udp spt:bootpc dpt:bootps
ACCEPT 0 -- 10.0.0.0/16 anywhere PHYSDEV
match --physdev-in wif_win
ACCEPT udp -- anywhere anywhere PHYSDEV
match --physdev-in wif_win udp spt:bootpc dpt:bootps
Chain OUTPUT (policy DROP)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT 0 -- anywhere anywhere state NEW
my iptables -t nat -L is the same as previuos.
Finally this is my ifconfig:
eth0 Link encap:Ethernet HWaddr 00:1D:92:3D:XX:XX
inet addr:192.168.1.254 Bcast:192.168.1.255
Mask:255.255.255.0
inet6 addr: fe80::21d:92ff:fe3d:c74b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1484885 errors:0 dropped:0 overruns:0 frame:0
TX packets:2058483 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:412365010 (393.2 MiB) TX bytes:1104053767 (1.0 GiB)
Interrupt:17 Base address:0x6000
eth1 Link encap:Ethernet HWaddr 00:0D:88:CD:XX:XX
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20d:88ff:fecd:6634/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2033285 errors:0 dropped:0 overruns:0 frame:0
TX packets:1459103 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1098654659 (1.0 GiB) TX bytes:412892888 (393.7 MiB)
Interrupt:16 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:9321 errors:0 dropped:0 overruns:0 frame:0
TX packets:9321 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1387261 (1.3 MiB) TX bytes:1387261 (1.3 MiB)
vif8.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet addr:10.0.8.128 Bcast:0.0.0.0 Mask:255.255.255.255
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8384 (8.1 KiB) TX bytes:3200 (3.1 KiB)
wif_win Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet addr:10.0.9.128 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
# ROUTE output:
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.0.10.1 0.0.0.0 255.255.255.255 UH 0 0 0
wif_win
10.0.8.1 0.0.0.0 255.255.255.255 UH 0 0 0
vif8.0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0
eth1
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0
eth0
NOW, my DomU etch is working well, I can access Internet and machine on
the local network whitout problems.
The DomU win is up with a network card but is unable to gain access to
Dom0.
I think Xen is doing the correct working by inserting correct rules and
correct host declaration in dhcpd.conf.
The only thing I''ve noticed is with a ps auxwwwwwwwwww:
root 11492 3.7 0.3 26040 3592 ? Sl 14:40
0:00 /usr/lib/xen-3.2-1/bin/qemu-dm -d 10 -domain-name win01 -vnc
0.0.0.0:0 -vcpus 1 -boot d -acpi -usbdevice tablet -net
nic,vlan=1,macaddr=00:16:3e:2a:f3:ea,model=rtl8139 -net
tap,vlan=1,bridge=xenbr0 -M xenfv
I see xen passed a bridge... but I''ve commented it out from win.cfg..
It''s not strange? Is this a bug?
Someone else have my same configuration working?
Thanks,
Michele
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users