Greetings, I am having some issues trying to get xen to see 2 new NICs I have added to the Dom0. Whenever I try to walk through the recommended procedures I found here http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/en-US/RHEL510/Vi rtualization_Guide/ch-virt-bridge-errors.html However, I never can get the brctl to show any other device except xenbr0. Can someone please point me to better instructions on adding additonal NICs to an existing Dom0? Or better yet explain why following the brief instructions above does not work. [root@basevs ~]# uname -a Linux basevs 2.6.18-53.1.14.el5xen #1 SMP Tue Feb 19 07:33:17 EST 2008 x86_64 x86_64 x86_64 GNU/Linux [root@basevs ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.1 (Tikanga) [root@basevs ~]# brctl show bridge name bridge id STP enabled interfaces virbr0 8000.000000000000 no xenbr0 8000.feffffffffff no vif1.0 peth0 vif0.0 [root@basevs ~]# ifconfig |grep eth eth0 Link encap:Ethernet HWaddr 00:1A:4B:47:B8:40 eth1 Link encap:Ethernet HWaddr 00:10:60:2E:74:C7 eth2 Link encap:Ethernet HWaddr 00:10:60:23:0F:2F peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF [root@basevs ~]# ifconfig |grep vif vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF [root@basevs ~]# ifconfig |grep xenb xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF Any help would be greatly appriciated! Thanks! -=J _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users