hello i just installed xen on ubuntu-server. dom0 was configured and started successfully. now i created a domU with xen-create-image. the config xen-tools.conf I modified corresponding to a howto. so far so good. but, after "xm create myvm.conf" the guest-system is starting, but it is freezing after 5 seconds. 4.1.2-16ubuntu2)) #1 SMP Mon Oct 15 00:35:38 GMT 2007 (Unofficial) [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000010800000 (usable) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 264MB LOWMEM available. [ 6857.438130] Zone PFN ranges: [ 6857.438133] DMA 0 -> 67584 [ 6857.438136] Normal 67584 -> 67584 [ 6857.438138] HighMem 67584 -> 67584 [ 6857.438141] early_node_map[1] active PFN ranges [ 6857.438143] 0: 0 -> 67584 [ 6857.451148] ACPI in unprivileged domain disabled [ 6857.451846] Allocating PCI resources starting at 20000000 (gap: 10800000:ef800000) [ 6857.451967] Built 1 zonelists. Total pages: 67056 [ 6857.451974] Kernel command line: root=/dev/hda1 w ip=:1.2.3.4::::eth0:dhcp [ 6857.452298] Enabling fast FPU save and restore... done. [ 6857.452305] Enabling unmasked SIMD FPU exception support... done. [ 6857.452309] Initializing CPU#0 [ 6857.452510] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 6857.452557] Xen reported: 1791.201 MHz processor. [ 6857.452627] Console: colour dummy device 80x25 [ 6857.453159] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 6857.453537] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 6857.453652] Software IO TLB disabled [ 6857.453660] vmalloc area: d1000000-f53fe000, maxmem 2d800000 [ 6857.462185] Memory: 238584k/270336k available (2071k kernel code, 23236k reserved, 926k data, 200k init, 0k highmem) [ 6857.462216] virtual kernel memory layout: [ 6857.462217] fixmap : 0xf568f000 - 0xf57ff000 (1472 kB) [ 6857.462219] pkmap : 0xf5400000 - 0xf5600000 (2048 kB) [ 6857.462221] vmalloc : 0xd1000000 - 0xf53fe000 ( 579 MB) [ 6857.462222] lowmem : 0xc0000000 - 0xd0800000 ( 264 MB) [ 6857.462224] .init : 0xc03f3000 - 0xc0425000 ( 200 kB) [ 6857.462225] .data : 0xc0305cfe - 0xc03ed544 ( 926 kB) [ 6857.462227] .text : 0xc0100000 - 0xc0305cfe (2071 kB) [ 6857.462253] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 6857.462335] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 6857.528615] Calibrating delay using timer specific routine.. 3584.53 BogoMIPS (lpj=7169072) [ 6857.528999] Security Framework v1.0.0 initialized [ 6857.529164] SELinux: Disabled at boot. [ 6857.529311] Mount-cache hash table entries: 512 [ 6857.529626] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 6857.529765] CPU: L2 Cache: 256K (64 bytes/line) [ 6857.529885] Compat vDSO mapped to f57fe000. [ 6857.530169] Checking ''hlt'' instruction... OK. [ 6857.530664] SMP alternatives: switching to UP code [ 6857.531300] Freeing SMP alternatives: 11k freed [ 6857.531831] Early unpacking initramfs... done [ 6857.587358] Brought up 1 CPUs [ 6857.588703] NET: Registered protocol family 16 [ 6857.591630] Brought up 1 CPUs [ 6857.592065] PCI: Fatal: No config space access function found [ 6857.592210] PCI: setting up Xen PCI frontend stub [ 6857.593486] ACPI: Interpreter disabled. [ 6857.593843] Linux Plug and Play Support v0.97 (c) Adam Belay [ 6857.594037] pnp: PnP ACPI: disabled [ 6857.594978] xen_mem: Initialising balloon driver. [ 6857.598733] Setting mem allocation to 262144 kiB [ 6857.599365] PCI: System does not support PCI [ 6857.599608] PCI: System does not support PCI [ 6857.599832] NET: Registered protocol family 8 [ 6857.600081] NET: Registered protocol family 20 [ 6857.600778] Time: xen clocksource has been installed. [ 6857.601393] NET: Registered protocol family 2 [ 6857.624138] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 6857.624519] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 6857.625151] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 6857.625779] TCP: Hash tables configured (established 16384 bind 16384) [ 6857.626160] TCP reno registered [ 6857.632254] checking if image is initramfs... it is [ 6857.718708] Freeing initrd memory: 15996k freed [ 6857.719707] audit: initializing netlink socket (disabled) [ 6857.720132] audit(1196285667.716:1): initialized [ 6857.723002] VFS: Disk quotas dquot_6.5.1 [ 6857.723661] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6857.724273] io scheduler noop registered [ 6857.724585] io scheduler anticipatory registered [ 6857.724741] io scheduler deadline registered [ 6857.724980] io scheduler cfq registered (default) [ 6857.768634] Real Time Clock Driver v1.12ac [ 6857.769951] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 6857.770719] input: Macintosh mouse button emulation as /class/input/input0 [ 6857.771269] xencons_init: Initializing xen vfb; pass xencons=tty to prevent this [ 6857.772168] Xen virtual console successfully installed as xvc0 [ 6857.772713] Event-channel device installed. [ 6857.806376] netfront: Initialising virtual ethernet driver. [ 6857.809001] xen-vbd: registered block device major 3 [ 6857.809405] blkfront: hda1: barriers enabled [ 6857.811427] blkfront: hda2: barriers enabled [ 6857.817384] netfront: device eth0 has copying receive path. [ 6857.820544] PNP: No PS/2 controller found. Probing ports directly. [ 6857.821781] i8042.c: No controller found. [ 6857.822285] mice: PS/2 mouse device common for all mice [ 6857.822899] TCP cubic registered [ 6857.823216] NET: Registered protocol family 1 [ 6857.823481] Using IPI No-Shortcut mode [ 6857.823748] XENBUS: Device with no driver: device/console/0 [ 6857.824345] Freeing unused kernel memory: 200k freed [ 6858.160168] AppArmor: AppArmor initialized<5>audit(1196285668.156:2): type=1505 info="AppArmor initialized" pid=996 [ 6858.175716] fuse init (API version 7.Cool [ 6858.188451] Failure registering capabilities with primary security module. [ 6858.220824] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 6858.646718] ReiserFS: hda1: found reiserfs format "3.6" with standard journal [ 6858.647212] ReiserFS: hda1: using ordered data mode [ 6858.647779] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 6858.652464] ReiserFS: hda1: checking transaction log (hda1) [ 6858.653520] ReiserFS: hda1: Using r5 hash to sort names after the last output, the system is hanging. the cpu load is 100% but nothing happens i already tried ext3 instead of reiserfs and debian etch in place of ubuntu gutsy. but always the same scenario... any ideas?? darkwave Edit/Delete Message -- View this message in context: http://www.nabble.com/domU-is-freezing-after-create-tf4893063.html#a14012406 Sent from the Xen - User mailing list archive at Nabble.com. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
I never managed to get Ubuntu 7.10 working reliably. However, I saw some posts in this mailing list regarding the "clock" wrt to Ubuntu/Debian problems. Maybe you should make search. Emre On Nov 28, 2007 11:18 PM, darkwave <darkwave@gmx.ch> wrote:> > hello > > i just installed xen on ubuntu-server. dom0 was configured and started > successfully. > now i created a domU with xen-create-image. the config xen-tools.conf I > modified corresponding to a howto. > so far so good. > but, after "xm create myvm.conf" the guest-system is starting, but it is > freezing after 5 seconds. > > > 4.1.2-16ubuntu2)) #1 SMP Mon Oct 15 00:35:38 GMT 2007 (Unofficial) > [ 0.000000] Reserving virtual address space above 0xf5800000 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 0000000010800000 (usable) > [ 0.000000] 0MB HIGHMEM available. > [ 0.000000] 264MB LOWMEM available. > [ 6857.438130] Zone PFN ranges: > [ 6857.438133] DMA 0 -> 67584 > [ 6857.438136] Normal 67584 -> 67584 > [ 6857.438138] HighMem 67584 -> 67584 > [ 6857.438141] early_node_map[1] active PFN ranges > [ 6857.438143] 0: 0 -> 67584 > [ 6857.451148] ACPI in unprivileged domain disabled > [ 6857.451846] Allocating PCI resources starting at 20000000 (gap: > 10800000:ef800000) > [ 6857.451967] Built 1 zonelists. Total pages: 67056 > [ 6857.451974] Kernel command line: root=/dev/hda1 w > ip=:1.2.3.4::::eth0:dhcp > [ 6857.452298] Enabling fast FPU save and restore... done. > [ 6857.452305] Enabling unmasked SIMD FPU exception support... done. > [ 6857.452309] Initializing CPU#0 > [ 6857.452510] PID hash table entries: 2048 (order: 11, 8192 bytes) > [ 6857.452557] Xen reported: 1791.201 MHz processor. > [ 6857.452627] Console: colour dummy device 80x25 > [ 6857.453159] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 6857.453537] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 6857.453652] Software IO TLB disabled > [ 6857.453660] vmalloc area: d1000000-f53fe000, maxmem 2d800000 > [ 6857.462185] Memory: 238584k/270336k available (2071k kernel code, > 23236k > reserved, 926k data, 200k init, 0k highmem) > [ 6857.462216] virtual kernel memory layout: > [ 6857.462217] fixmap : 0xf568f000 - 0xf57ff000 (1472 kB) > [ 6857.462219] pkmap : 0xf5400000 - 0xf5600000 (2048 kB) > [ 6857.462221] vmalloc : 0xd1000000 - 0xf53fe000 ( 579 MB) > [ 6857.462222] lowmem : 0xc0000000 - 0xd0800000 ( 264 MB) > [ 6857.462224] .init : 0xc03f3000 - 0xc0425000 ( 200 kB) > [ 6857.462225] .data : 0xc0305cfe - 0xc03ed544 ( 926 kB) > [ 6857.462227] .text : 0xc0100000 - 0xc0305cfe (2071 kB) > [ 6857.462253] Checking if this processor honours the WP bit even in > supervisor mode... Ok. > [ 6857.462335] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, > CPUs=1, Nodes=1 > [ 6857.528615] Calibrating delay using timer specific routine.. 3584.53 > BogoMIPS (lpj=7169072) > [ 6857.528999] Security Framework v1.0.0 initialized > [ 6857.529164] SELinux: Disabled at boot. > [ 6857.529311] Mount-cache hash table entries: 512 > [ 6857.529626] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 6857.529765] CPU: L2 Cache: 256K (64 bytes/line) > [ 6857.529885] Compat vDSO mapped to f57fe000. > [ 6857.530169] Checking ''hlt'' instruction... OK. > [ 6857.530664] SMP alternatives: switching to UP code > [ 6857.531300] Freeing SMP alternatives: 11k freed > [ 6857.531831] Early unpacking initramfs... done > [ 6857.587358] Brought up 1 CPUs > [ 6857.588703] NET: Registered protocol family 16 > [ 6857.591630] Brought up 1 CPUs > [ 6857.592065] PCI: Fatal: No config space access function found > [ 6857.592210] PCI: setting up Xen PCI frontend stub > [ 6857.593486] ACPI: Interpreter disabled. > [ 6857.593843] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 6857.594037] pnp: PnP ACPI: disabled > [ 6857.594978] xen_mem: Initialising balloon driver. > [ 6857.598733] Setting mem allocation to 262144 kiB > [ 6857.599365] PCI: System does not support PCI > [ 6857.599608] PCI: System does not support PCI > [ 6857.599832] NET: Registered protocol family 8 > [ 6857.600081] NET: Registered protocol family 20 > [ 6857.600778] Time: xen clocksource has been installed. > [ 6857.601393] NET: Registered protocol family 2 > [ 6857.624138] IP route cache hash table entries: 4096 (order: 2, 16384 > bytes) > [ 6857.624519] TCP established hash table entries: 16384 (order: 5, 196608 > bytes) > [ 6857.625151] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > [ 6857.625779] TCP: Hash tables configured (established 16384 bind 16384) > [ 6857.626160] TCP reno registered > [ 6857.632254] checking if image is initramfs... it is > [ 6857.718708] Freeing initrd memory: 15996k freed > [ 6857.719707] audit: initializing netlink socket (disabled) > [ 6857.720132] audit(1196285667.716:1): initialized > [ 6857.723002] VFS: Disk quotas dquot_6.5.1 > [ 6857.723661] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 6857.724273] io scheduler noop registered > [ 6857.724585] io scheduler anticipatory registered > [ 6857.724741] io scheduler deadline registered > [ 6857.724980] io scheduler cfq registered (default) > [ 6857.768634] Real Time Clock Driver v1.12ac > [ 6857.769951] RAMDISK driver initialized: 16 RAM disks of 65536K size > 1024 > blocksize > [ 6857.770719] input: Macintosh mouse button emulation as > /class/input/input0 > [ 6857.771269] xencons_init: Initializing xen vfb; pass xencons=tty to > prevent this > [ 6857.772168] Xen virtual console successfully installed as xvc0 > [ 6857.772713] Event-channel device installed. > [ 6857.806376] netfront: Initialising virtual ethernet driver. > [ 6857.809001] xen-vbd: registered block device major 3 > [ 6857.809405] blkfront: hda1: barriers enabled > [ 6857.811427] blkfront: hda2: barriers enabled > [ 6857.817384] netfront: device eth0 has copying receive path. > [ 6857.820544] PNP: No PS/2 controller found. Probing ports directly. > [ 6857.821781] i8042.c: No controller found. > [ 6857.822285] mice: PS/2 mouse device common for all mice > [ 6857.822899] TCP cubic registered > [ 6857.823216] NET: Registered protocol family 1 > [ 6857.823481] Using IPI No-Shortcut mode > [ 6857.823748] XENBUS: Device with no driver: device/console/0 > [ 6857.824345] Freeing unused kernel memory: 200k freed > [ 6858.160168] AppArmor: AppArmor initialized<5>audit(1196285668.156:2): > type=1505 info="AppArmor initialized" pid=996 > [ 6858.175716] fuse init (API version 7.Cool > [ 6858.188451] Failure registering capabilities with primary security > module. > [ 6858.220824] thermal: Unknown symbol acpi_processor_set_thermal_limit > [ 6858.646718] ReiserFS: hda1: found reiserfs format "3.6" with standard > journal > [ 6858.647212] ReiserFS: hda1: using ordered data mode > [ 6858.647779] ReiserFS: hda1: journal params: device hda1, size 8192, > journal first block 18, max trans len 1024, max batch 900, max commit age > 30, max trans age 30 > [ 6858.652464] ReiserFS: hda1: checking transaction log (hda1) > [ 6858.653520] ReiserFS: hda1: Using r5 hash to sort names > > > after the last output, the system is hanging. > the cpu load is 100% but nothing happens > > i already tried ext3 instead of reiserfs and debian etch in place of > ubuntu > gutsy. > > but always the same scenario... > > any ideas?? > > darkwave > Edit/Delete Message > > -- > View this message in context: > http://www.nabble.com/domU-is-freezing-after-create-tf4893063.html#a14012406 > Sent from the Xen - User mailing list archive at Nabble.com. > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >-- Emre Erenoglu erenoglu@gmail.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
darkwave wrote:> hello > > i just installed xen on ubuntu-server. dom0 was configured and started > successfully. > now i created a domU with xen-create-image. the config xen-tools.conf I > modified corresponding to a howto. > so far so good. > but, after "xm create myvm.conf" the guest-system is starting, but it is > freezing after 5 seconds. > > > 4.1.2-16ubuntu2)) #1 SMP Mon Oct 15 00:35:38 GMT 2007 (Unofficial) > [ 0.000000] Reserving virtual address space above 0xf5800000 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 0000000010800000 (usable) > [ 0.000000] 0MB HIGHMEM available. > [ 0.000000] 264MB LOWMEM available. > [ 6857.438130] Zone PFN ranges: > [ 6857.438133] DMA 0 -> 67584 > [ 6857.438136] Normal 67584 -> 67584 > [ 6857.438138] HighMem 67584 -> 67584 > [ 6857.438141] early_node_map[1] active PFN ranges > [ 6857.438143] 0: 0 -> 67584 > [ 6857.451148] ACPI in unprivileged domain disabled > [ 6857.451846] Allocating PCI resources starting at 20000000 (gap: > 10800000:ef800000) > [ 6857.451967] Built 1 zonelists. Total pages: 67056 > [ 6857.451974] Kernel command line: root=/dev/hda1 w > ip=:1.2.3.4::::eth0:dhcp > [ 6857.452298] Enabling fast FPU save and restore... done. > [ 6857.452305] Enabling unmasked SIMD FPU exception support... done. > [ 6857.452309] Initializing CPU#0 > [ 6857.452510] PID hash table entries: 2048 (order: 11, 8192 bytes) > [ 6857.452557] Xen reported: 1791.201 MHz processor. > [ 6857.452627] Console: colour dummy device 80x25 > [ 6857.453159] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 6857.453537] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 6857.453652] Software IO TLB disabled > [ 6857.453660] vmalloc area: d1000000-f53fe000, maxmem 2d800000 > [ 6857.462185] Memory: 238584k/270336k available (2071k kernel code, 23236k > reserved, 926k data, 200k init, 0k highmem) > [ 6857.462216] virtual kernel memory layout: > [ 6857.462217] fixmap : 0xf568f000 - 0xf57ff000 (1472 kB) > [ 6857.462219] pkmap : 0xf5400000 - 0xf5600000 (2048 kB) > [ 6857.462221] vmalloc : 0xd1000000 - 0xf53fe000 ( 579 MB) > [ 6857.462222] lowmem : 0xc0000000 - 0xd0800000 ( 264 MB) > [ 6857.462224] .init : 0xc03f3000 - 0xc0425000 ( 200 kB) > [ 6857.462225] .data : 0xc0305cfe - 0xc03ed544 ( 926 kB) > [ 6857.462227] .text : 0xc0100000 - 0xc0305cfe (2071 kB) > [ 6857.462253] Checking if this processor honours the WP bit even in > supervisor mode... Ok. > [ 6857.462335] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, > CPUs=1, Nodes=1 > [ 6857.528615] Calibrating delay using timer specific routine.. 3584.53 > BogoMIPS (lpj=7169072) > [ 6857.528999] Security Framework v1.0.0 initialized > [ 6857.529164] SELinux: Disabled at boot. > [ 6857.529311] Mount-cache hash table entries: 512 > [ 6857.529626] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 6857.529765] CPU: L2 Cache: 256K (64 bytes/line) > [ 6857.529885] Compat vDSO mapped to f57fe000. > [ 6857.530169] Checking ''hlt'' instruction... OK. > [ 6857.530664] SMP alternatives: switching to UP code > [ 6857.531300] Freeing SMP alternatives: 11k freed > [ 6857.531831] Early unpacking initramfs... done > [ 6857.587358] Brought up 1 CPUs > [ 6857.588703] NET: Registered protocol family 16 > [ 6857.591630] Brought up 1 CPUs > [ 6857.592065] PCI: Fatal: No config space access function found > [ 6857.592210] PCI: setting up Xen PCI frontend stub > [ 6857.593486] ACPI: Interpreter disabled. > [ 6857.593843] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 6857.594037] pnp: PnP ACPI: disabled > [ 6857.594978] xen_mem: Initialising balloon driver. > [ 6857.598733] Setting mem allocation to 262144 kiB > [ 6857.599365] PCI: System does not support PCI > [ 6857.599608] PCI: System does not support PCI > [ 6857.599832] NET: Registered protocol family 8 > [ 6857.600081] NET: Registered protocol family 20 > [ 6857.600778] Time: xen clocksource has been installed. > [ 6857.601393] NET: Registered protocol family 2 > [ 6857.624138] IP route cache hash table entries: 4096 (order: 2, 16384 > bytes) > [ 6857.624519] TCP established hash table entries: 16384 (order: 5, 196608 > bytes) > [ 6857.625151] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > [ 6857.625779] TCP: Hash tables configured (established 16384 bind 16384) > [ 6857.626160] TCP reno registered > [ 6857.632254] checking if image is initramfs... it is > [ 6857.718708] Freeing initrd memory: 15996k freed > [ 6857.719707] audit: initializing netlink socket (disabled) > [ 6857.720132] audit(1196285667.716:1): initialized > [ 6857.723002] VFS: Disk quotas dquot_6.5.1 > [ 6857.723661] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 6857.724273] io scheduler noop registered > [ 6857.724585] io scheduler anticipatory registered > [ 6857.724741] io scheduler deadline registered > [ 6857.724980] io scheduler cfq registered (default) > [ 6857.768634] Real Time Clock Driver v1.12ac > [ 6857.769951] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 > blocksize > [ 6857.770719] input: Macintosh mouse button emulation as > /class/input/input0 > [ 6857.771269] xencons_init: Initializing xen vfb; pass xencons=tty to > prevent this > [ 6857.772168] Xen virtual console successfully installed as xvc0 > [ 6857.772713] Event-channel device installed. > [ 6857.806376] netfront: Initialising virtual ethernet driver. > [ 6857.809001] xen-vbd: registered block device major 3 > [ 6857.809405] blkfront: hda1: barriers enabled > [ 6857.811427] blkfront: hda2: barriers enabled > [ 6857.817384] netfront: device eth0 has copying receive path. > [ 6857.820544] PNP: No PS/2 controller found. Probing ports directly. > [ 6857.821781] i8042.c: No controller found. > [ 6857.822285] mice: PS/2 mouse device common for all mice > [ 6857.822899] TCP cubic registered > [ 6857.823216] NET: Registered protocol family 1 > [ 6857.823481] Using IPI No-Shortcut mode > [ 6857.823748] XENBUS: Device with no driver: device/console/0 > [ 6857.824345] Freeing unused kernel memory: 200k freed > [ 6858.160168] AppArmor: AppArmor initialized<5>audit(1196285668.156:2): > type=1505 info="AppArmor initialized" pid=996 > [ 6858.175716] fuse init (API version 7.Cool > [ 6858.188451] Failure registering capabilities with primary security > module. > [ 6858.220824] thermal: Unknown symbol acpi_processor_set_thermal_limit > [ 6858.646718] ReiserFS: hda1: found reiserfs format "3.6" with standard > journal > [ 6858.647212] ReiserFS: hda1: using ordered data mode > [ 6858.647779] ReiserFS: hda1: journal params: device hda1, size 8192, > journal first block 18, max trans len 1024, max batch 900, max commit age > 30, max trans age 30 > [ 6858.652464] ReiserFS: hda1: checking transaction log (hda1) > [ 6858.653520] ReiserFS: hda1: Using r5 hash to sort names > > > after the last output, the system is hanging. > the cpu load is 100% but nothing happens > > i already tried ext3 instead of reiserfs and debian etch in place of ubuntu > gutsy. > > but always the same scenario... > > any ideas?? > > darkwave > Edit/Delete Message > >Try this in the domU''s filesystem: chmod -x /lib/udev/set_hwclock HTH! Paul _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users