Hello out there, I''ve stumbled over a strange problem with my Xen setup. Using Xen 3.1 on OpenSuSE 10.3 I installed several domU''s. One of them - called "gate" - is acting as a router between two xen bridges - xenbr0 and xenbr1. When using scp from a domU, which has to route via "gate" because it is only bound to xenbr0, to a system connected via ethernet to peth1 I get extremely low transfer rates - down to 10kB/sec. Transfers to this system are as fast. Transfers of physical systems via "gate" are fast in any direction. Transfers between domU''s are fast - ok they don''t have to use "gate", as all of them are bond to xenbr0. Transfers to and from "gate" are fast. Just transfers to physical systems, via "gate" from a domU are slow as hell. There is no firewall activated, there is no traffic shaper. Using flood ping I can''t see loss of packets. Does anybody out there has an idea where to look for a solution of this problem? Thanks Ralf _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users