thr3ads.net - Xen users - [Xen-users] 64 bit Memory and IO resources & pciback [Oct 2007]

If this information is useful, please help other people find it:
Share via:

Morten Bøgeskov

2007-Oct-13 03:51 UTC

[Xen-users] 64 bit Memory and IO resources & pciback

Hello...

I run into a situation...
I''ve been more or less forced into using PAE (I would like 2.6.23 ;-)
This however results in something undesired.

PAE automatically selects "64 bit Memory and IO resources"  
CONFIG_RESOURCES_64BIT

However
"exporting" a Hauppauge PVR-500 & USB2 controller

Wether I use
   PCI Backend Mode (Passthrough)
   PCI Backend Mode (Virtual PCI)

xen-3.1.0: Non-PAE, No RESOURCES_64BIT => success
xen-3.1.0: Non-PAE, RESOURCES_64BIT => failure
xen-3.1.0: PAE, RESOURCES_64BIT => failure

success means I can record tv & see usb-devices.
failure? see below.

Does anybosy know a kernel option that I need to pass to get this to work.

when using RESOURCES_64BIT I get this in my domU console:

PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
ohci_hcd 0000:00:0a.0: init 0000:00:0a.0 fail, -14
ohci_hcd: probe of 0000:00:0a.0 failed with error -14
PCI: Enabling device 0000:00:0a.1 (0000 -> 0002)
ohci_hcd 0000:00:0a.1: init 0000:00:0a.1 fail, -14
ohci_hcd: probe of 0000:00:0a.1 failed with error -14
PCI: Enabling device 0000:00:0a.2 (0000 -> 0002)
ehci_hcd 0000:00:0a.2: init 0000:00:0a.2 fail, -14
ehci_hcd: probe of 0000:00:0a.2 failed with error -14

And

ivtv:  ==================== START INIT IVTV ===================ivtv:  version
1.0.0 (2.6.18-xenU-video mod_unload K7 gcc-4.1) loading
ivtv0: Autodetected Hauppauge card (cx23416 based)
PCI: Enabling device 0000:02:08.0 (0000 -> 0002)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 0-0050: Hauppauge model 23559, rev D496, serial# 9481257
tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L'') PAL(D/D1/K)  
(eeprom 0x74)
tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx  
101, type 62)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio, has no IR remote
ivtv0: Autodetected WinTV PVR 500 (unit #1)
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0060: TEA5767 detected.
tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
ivtv:  ======================  NEXT CARD  =====================ivtv1:
Autodetected Hauppauge card (cx23416 based)
PCI: Enabling device 0000:02:09.0 (0000 -> 0002)
ivtv1: Cannot request encoder memory region on card 1.
ivtv1: Error -5 on initialization



_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Morten Bøgeskov

2007-Oct-13 04:05 UTC

head link

[Xen-users] Re: 64 bit Memory and IO resources and pciback=

Quoting Morten Bøgeskov <xen-users@morten.bogeskov.dk>:
>
>
> Hello...
>
> I run into a situation...
> I''ve been more or less forced into using PAE (I would like 2.6.23
;-)
> This however results in something undesired.
>
> PAE automatically selects "64 bit Memory and IO resources"
> CONFIG_RESOURCES_64BIT
>
> However
> "exporting" a Hauppauge PVR-500 & USB2 controller
>
> Wether I use
>   PCI Backend Mode (Passthrough)
>   PCI Backend Mode (Virtual PCI)
>
> xen-3.1.0: Non-PAE, No RESOURCES_64BIT => success
> xen-3.1.0: Non-PAE, RESOURCES_64BIT => failure
> xen-3.1.0: PAE, RESOURCES_64BIT => failure
>
> success means I can record tv & see usb-devices.
> failure? see below.
>
> Does anybosy know a kernel option that I need to pass to get this to work.
>
> when using RESOURCES_64BIT I get this in my domU console:
>
> PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
> ohci_hcd 0000:00:0a.0: init 0000:00:0a.0 fail, -14
> ohci_hcd: probe of 0000:00:0a.0 failed with error -14
> PCI: Enabling device 0000:00:0a.1 (0000 -> 0002)
> ohci_hcd 0000:00:0a.1: init 0000:00:0a.1 fail, -14
> ohci_hcd: probe of 0000:00:0a.1 failed with error -14
> PCI: Enabling device 0000:00:0a.2 (0000 -> 0002)
> ehci_hcd 0000:00:0a.2: init 0000:00:0a.2 fail, -14
> ehci_hcd: probe of 0000:00:0a.2 failed with error -14
>
> And
>
> ivtv:  ==================== START INIT IVTV ===================> ivtv: 
version 1.0.0 (2.6.18-xenU-video mod_unload K7 gcc-4.1) loading
> ivtv0: Autodetected Hauppauge card (cx23416 based)
> PCI: Enabling device 0000:02:08.0 (0000 -> 0002)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> ivtv0: Encoder revision: 0x02060039
> tveeprom 0-0050: Hauppauge model 23559, rev D496, serial# 9481257
> tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
> tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L'')
PAL(D/D1/K)
> (eeprom 0x74)
> tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx
> 101, type 62)
> tveeprom 0-0050: audio processor is CX25843 (idx 37)
> tveeprom 0-0050: decoder processor is CX25843 (idx 30)
> tveeprom 0-0050: has radio, has no IR remote
> ivtv0: Autodetected WinTV PVR 500 (unit #1)
> tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
> tuner 0-0060: TEA5767 detected.
> tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A)
> ivtv0: Registered device video0 for encoder MPEG (4 MB)
> ivtv0: Registered device video32 for encoder YUV (2 MB)
> ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> ivtv0: Registered device radio0 for encoder radio
> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> ivtv:  ======================  NEXT CARD  =====================> ivtv1:
Autodetected Hauppauge card (cx23416 based)
> PCI: Enabling device 0000:02:09.0 (0000 -> 0002)
> ivtv1: Cannot request encoder memory region on card 1.
> ivtv1: Error -5 on initialization


-- 
Morten Bøgeskov (morten@bogeskov.dk)


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Morten Bøgeskov

2007-Oct-13 04:07 UTC

head link

[Xen-users] 64 bit Memory and IO resources and pciback

Quoting Morten Bøgeskov <xen-users@morten.bogeskov.dk>:
>Hello...
I run into a situation...
I''ve been more or less forced into using PAE (I would like 2.6.23 ;-)
This however results in something undesired.

PAE automatically selects "64 bit Memory and IO resources"
CONFIG_RESOURCES_64BIT

However
"exporting" a Hauppauge PVR-500 & USB2 controller

Wether I use
   PCI Backend Mode (Passthrough)
   PCI Backend Mode (Virtual PCI)

xen-3.1.0: Non-PAE, No RESOURCES_64BIT => success
xen-3.1.0: Non-PAE, RESOURCES_64BIT => failure
xen-3.1.0: PAE, RESOURCES_64BIT => failure

success means I can record tv & see usb-devices.
failure? see below.

Does anybosy know a kernel option that I need to pass to get this to work.

when using RESOURCES_64BIT I get this in my domU console:

PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
ohci_hcd 0000:00:0a.0: init 0000:00:0a.0 fail, -14
ohci_hcd: probe of 0000:00:0a.0 failed with error -14
PCI: Enabling device 0000:00:0a.1 (0000 -> 0002)
ohci_hcd 0000:00:0a.1: init 0000:00:0a.1 fail, -14
ohci_hcd: probe of 0000:00:0a.1 failed with error -14
PCI: Enabling device 0000:00:0a.2 (0000 -> 0002)
ehci_hcd 0000:00:0a.2: init 0000:00:0a.2 fail, -14
ehci_hcd: probe of 0000:00:0a.2 failed with error -14

And

ivtv:  ==================== START INIT IVTV ===================ivtv:  version
1.0.0 (2.6.18-xenU-video mod_unload K7 gcc-4.1) loading
ivtv0: Autodetected Hauppauge card (cx23416 based)
PCI: Enabling device 0000:02:08.0 (0000 -> 0002)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 0-0050: Hauppauge model 23559, rev D496, serial# 9481257
tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L'') PAL(D/D1/K)  
(eeprom 0x74)
tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx  
101, type 62)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio, has no IR remote
ivtv0: Autodetected WinTV PVR 500 (unit #1)
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0060: TEA5767 detected.
tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
ivtv:  ======================  NEXT CARD  =====================ivtv1:
Autodetected Hauppauge card (cx23416 based)
PCI: Enabling device 0000:02:09.0 (0000 -> 0002)
ivtv1: Cannot request encoder memory region on card 1.
ivtv1: Error -5 on initialization


-- 
Morten Bøgeskov (morten@bogeskov.dk)


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Morten Bøgeskov

2007-Oct-15 12:31 UTC

head link

[Xen-users] Re: 64 bit Memory and... Sorry Mailer trouble

I''m sorry for all the mails regarding the same.


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Mark Williamson

2007-Oct-18 17:08 UTC

head link

Re: [Xen-users] 64 bit Memory and IO resources & pciback

Sounds like it could be a bug / quirk in the PCI passthrough drivers.  Perhaps 
they hadn''t been tested with 64-bit mem and IO resources before.  That
said
I''d have thought they would have been, given Xen runs on PAE by default
nowadays.

Probably worth reporting to xen-devel.

I''ve had a quick scan through the code for data size issues but am not
seeing
anything obvious at the moment.  Do any interesting messages come out in 
dmesg in dom0 when you do this?  Any interesting compile warnings when you 
built the kernel?

Cheers,
Mark

On Saturday 13 October 2007, Morten Bøgeskov wrote:> Hello...
>
> I run into a situation...
> I''ve been more or less forced into using PAE (I would like 2.6.23
;-)
> This however results in something undesired.
>
> PAE automatically selects "64 bit Memory and IO resources"
> CONFIG_RESOURCES_64BIT
>
> However
> "exporting" a Hauppauge PVR-500 & USB2 controller
>
> Wether I use
>    PCI Backend Mode (Passthrough)
>    PCI Backend Mode (Virtual PCI)
>
> xen-3.1.0: Non-PAE, No RESOURCES_64BIT => success
> xen-3.1.0: Non-PAE, RESOURCES_64BIT => failure
> xen-3.1.0: PAE, RESOURCES_64BIT => failure
>
> success means I can record tv & see usb-devices.
> failure? see below.
>
> Does anybosy know a kernel option that I need to pass to get this to work.
>
> when using RESOURCES_64BIT I get this in my domU console:
>
> PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
> ohci_hcd 0000:00:0a.0: init 0000:00:0a.0 fail, -14
> ohci_hcd: probe of 0000:00:0a.0 failed with error -14
> PCI: Enabling device 0000:00:0a.1 (0000 -> 0002)
> ohci_hcd 0000:00:0a.1: init 0000:00:0a.1 fail, -14
> ohci_hcd: probe of 0000:00:0a.1 failed with error -14
> PCI: Enabling device 0000:00:0a.2 (0000 -> 0002)
> ehci_hcd 0000:00:0a.2: init 0000:00:0a.2 fail, -14
> ehci_hcd: probe of 0000:00:0a.2 failed with error -14
>
> And
>
> ivtv:  ==================== START INIT IVTV ===================> ivtv: 
version 1.0.0 (2.6.18-xenU-video mod_unload K7 gcc-4.1) loading
> ivtv0: Autodetected Hauppauge card (cx23416 based)
> PCI: Enabling device 0000:02:08.0 (0000 -> 0002)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> ivtv0: Encoder revision: 0x02060039
> tveeprom 0-0050: Hauppauge model 23559, rev D496, serial# 9481257
> tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73)
> tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L'')
PAL(D/D1/K)
> (eeprom 0x74)
> tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx
> 101, type 62)
> tveeprom 0-0050: audio processor is CX25843 (idx 37)
> tveeprom 0-0050: decoder processor is CX25843 (idx 30)
> tveeprom 0-0050: has radio, has no IR remote
> ivtv0: Autodetected WinTV PVR 500 (unit #1)
> tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
> tuner 0-0060: TEA5767 detected.
> tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A)
> ivtv0: Registered device video0 for encoder MPEG (4 MB)
> ivtv0: Registered device video32 for encoder YUV (2 MB)
> ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> ivtv0: Registered device radio0 for encoder radio
> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> ivtv:  ======================  NEXT CARD  =====================> ivtv1:
Autodetected Hauppauge card (cx23416 based)
> PCI: Enabling device 0000:02:09.0 (0000 -> 0002)
> ivtv1: Cannot request encoder memory region on card 1.
> ivtv1: Error -5 on initialization
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users


-- 
Dave: Just a question. What use is a unicyle with no seat?  And no pedals!
Mark: To answer a question with a question: What use is a skateboard?
Dave: Skateboards have wheels.
Mark: My wheel has a wheel!

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Xen users - Oct 2007 - 64 bit Memory and IO resources & pciback

[Xen-users] 64 bit Memory and IO resources & pciback

[Xen-users] Re: 64 bit Memory and IO resources and pciback=

[Xen-users] 64 bit Memory and IO resources and pciback

[Xen-users] Re: 64 bit Memory and... Sorry Mailer trouble

Re: [Xen-users] 64 bit Memory and IO resources & pciback