Hi all,
what''s the meaning ot the network frontend and backend?
can them be treated as connected network?
it''s strange that I can not make it work.
in doman-0:
[root@localhost ~]# ifconfig vif2.0
vif2.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet addr:10.0.0.254 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:48 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
in hvm domain-2
IP. 10.0.0.1, mask, 10.0.0.0, gw, 10.0.0.1
but ping from domain-2 to domain-0 failed
[domain-2, widonws]ping 10.0.0.254
i''m not using bridge network, here is the brctl output.
[root@localhost ~]# brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.f646e0ae933a no tap0
and here is the xend-config.sxp
#(network-script network-bridge)
(network-script ''network-nat dhcp=yes'')
(vif-script vif-nat)
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users