Hi friends, My problem is Dom-u not mounting on the dom-0. Actually guest the image was created on SUSE. i have copied that image from SUSE to RHEL5. now that image dom-u is not mounting on the RHEL5. here one observation is the same image i can able to mount on SUSE. Please give me any suggestions. Cheers, RK _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
hi if i understand, you want to mount inside the dom0 a disk from a domU ? fdisk -l : what''s the filesystems ? Is-it a disk image or a partiton image ? Regards Yves Rama Krishna a écrit :> Hi friends, > > My problem is Dom-u not mounting on the dom-0. Actually guest the > image was created on SUSE. i have copied that image from SUSE to > RHEL5. now that image dom-u is not mounting on the RHEL5. here one > observation is the same image i can able to mount on SUSE. Please > give me any suggestions. > > Cheers, > RK > > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users-- Yves-Gaël Chény Directeur technique 44 Boulevard des Pas Enchantés 44230 St Sébastien sur Loire Tel : 02 40 97 62 67 - 08 73 77 24 91 GSM : 06 98 58 41 55 http://www.tranquilitsystems.com/ yves-gael.cheny@tranquil-it-systems.fr Tranquil IT Systems . SAS 37 000 ¤ _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
trying to mount inside the domU a partition from a dom0. On 8/10/07, Yves-gaël Chény <yves-gael.cheny@tranquil-it-systems.fr> wrote:> > hi > > if i understand, you want to mount inside the dom0 a disk from a domU ? > > fdisk -l : > > what''s the filesystems ? > Is-it a disk image or a partiton image ? > > Regards > Yves > > Rama Krishna a écrit : > > Hi friends, > > > > My problem is Dom-u not mounting on the dom-0. Actually guest the > > image was created on SUSE. i have copied that image from SUSE to > > RHEL5. now that image dom-u is not mounting on the RHEL5. here one > > observation is the same image i can able to mount on SUSE. Please > > give me any suggestions. > > > > Cheers, > > RK > > > > > > ------------------------------------------------------------------------ > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > > -- > Yves-Gaël Chény > Directeur technique > > 44 Boulevard des Pas Enchantés > 44230 St Sébastien sur Loire > Tel : 02 40 97 62 67 - 08 73 77 24 91 > GSM : 06 98 58 41 55 > http://www.tranquilitsystems.com/ > yves-gael.cheny@tranquil-it-systems.fr > > Tranquil IT Systems . SAS 37 000 ¤ > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
What error are you receiving when trying to mount the partition? What does the disk configuration for the domU look like? --John Rama Krishna wrote:> trying to mount inside the domU a partition from a dom0. > > On 8/10/07, *Yves-gaël Chény * <yves-gael.cheny@tranquil-it-systems.fr > <mailto:yves-gael.cheny@tranquil-it-systems.fr>> wrote: > > hi > > if i understand, you want to mount inside the dom0 a disk from a domU ? > > fdisk -l : > > what''s the filesystems ? > Is-it a disk image or a partiton image ? > > Regards > Yves > > Rama Krishna a écrit : > > Hi friends, > > > > My problem is Dom-u not mounting on the dom-0. Actually guest the > > image was created on SUSE. i have copied that image from SUSE to > > RHEL5. now that image dom-u is not mounting on the RHEL5. here one > > observation is the same image i can able to mount on SUSE. Please > > give me any suggestions. > > > > Cheers, > > RK > > > > > > > ------------------------------------------------------------------------ > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com <mailto:Xen-users@lists.xensource.com> > > http://lists.xensource.com/xen-users > > -- > Yves-Gaël Chény > Directeur technique > > 44 Boulevard des Pas Enchantés > 44230 St Sébastien sur Loire > Tel : 02 40 97 62 67 - 08 73 77 24 91 > GSM : 06 98 58 41 55 > http://www.tranquilitsystems.com/ > yves-gael.cheny@tranquil-it-systems.fr > <mailto:yves-gael.cheny@tranquil-it-systems.fr> > > Tranquil IT Systems . SAS 37 000 ¤ > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Actualluy i''m trying to mount domU guest image on dom0. when i give the below command it is showing some error. Error: [root@test-04 WinXPSP2]# ./mount.sh WindowsXPSP2-Test.img /misc/ -o loop mount: unknown filesystem type ''ntfs'' [root@test-04 WinXPSP2]# ---------- Forwarded message ---------- From: John T. Yocum <john@fluidhosting.com> Date: Aug 10, 2007 2:55 PM Subject: Re: [Xen-users] Dom-U not mounting To: xen-users@lists.xensource.com What error are you receiving when trying to mount the partition? What does the disk configuration for the domU look like? --John Rama Krishna wrote:> trying to mount inside the domU a partition from a dom0. > > On 8/10/07, *Yves-gaël Chény * <yves-gael.cheny@tranquil-it-systems.fr > <mailto:yves-gael.cheny@tranquil-it-systems.fr>> wrote: > > hi > > if i understand, you want to mount inside the dom0 a disk from a domU?> > fdisk -l : > > what''s the filesystems ? > Is-it a disk image or a partiton image ? > > Regards > Yves > > Rama Krishna a écrit : > > Hi friends, > > > > My problem is Dom-u not mounting on the dom-0. Actually guest the > > image was created on SUSE. i have copied that image from SUSE to > > RHEL5. now that image dom-u is not mounting on the RHEL5. here one > > observation is the same image i can able to mount on SUSE. Please > > give me any suggestions. > > > > Cheers, > > RK > > > > > > >------------------------------------------------------------------------> > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com <mailto:Xen-users@lists.xensource.com > > > http://lists.xensource.com/xen-users > > -- > Yves-Gaël Chény > Directeur technique > > 44 Boulevard des Pas Enchantés > 44230 St Sébastien sur Loire > Tel : 02 40 97 62 67 - 08 73 77 24 91 > GSM : 06 98 58 41 55 > http://www.tranquilitsystems.com/ > yves-gael.cheny@tranquil-it-systems.fr > <mailto:yves-gael.cheny@tranquil-it-systems.fr> > > Tranquil IT Systems . SAS 37 000 ¤ > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
What is yours dom0 is ?. Is it RHEL5? On RHEL5 it is supported. On 8/10/07, trilok nuwal <tc.nuwal@gmail.com> wrote:> > R u aware of the partitions on the disk WindowsXPSP2-Test.img and file > system on each partiton. > > Tell me the no of partition and file system on each partition. > > U cant mount a file disk directly, beacuse windows run as HVM domain and > use proper partitioning and file sytem on this. so to mount a partition on a > file disk we use lomount. > > #lomount -diskimage <FILE> -partition <NUM> <mountpoint> > > Replace <FILE> with disk image and <NUM> with the no like 1,2,3.. and > finally mountpoint same as mount option. > > Thanks, > -Trilok > > > On 8/10/07, Rama Krishna <hydprk@gmail.com> wrote: > > > > Actualluy i want mount domU guest image on dom0. > > #mount winxp.img /mnt -o loop > > > > when i give the above command it is showing some error. > > Error: > > [root@test-04 WinXPSP2]# ./mount.sh WindowsXPSP2-Test.img /misc/ -o loop > > > > mount: unknown filesystem type ''ntfs'' > > [root@test-04 WinXPSP2]# > > > > > > > > On 8/10/07, trilok nuwal < tc.nuwal@gmail.com> wrote: > > > > > > Sorry i could help u if u can elaborate yr problem ? > > > I did get u what u want...... > > > > > > On 8/10/07, Rama Krishna < hydprk@gmail.com> wrote: > > > > > > > > trying to mount inside the domU a partition from a dom0. > > > > > > > > On 8/10/07, Yves-gaël Chény <yves-gael.cheny@tranquil-it-systems.fr> > > > > wrote: > > > > > > > > > > hi > > > > > > > > > > if i understand, you want to mount inside the dom0 a disk from a > > > > > domU ? > > > > > > > > > > fdisk -l : > > > > > > > > > > what''s the filesystems ? > > > > > Is-it a disk image or a partiton image ? > > > > > > > > > > Regards > > > > > Yves > > > > > > > > > > Rama Krishna a écrit : > > > > > > Hi friends, > > > > > > > > > > > > My problem is Dom-u not mounting on the dom-0. Actually guest > > > > > the > > > > > > image was created on SUSE. i have copied that image from SUSE to > > > > > > RHEL5. now that image dom-u is not mounting on the RHEL5. here > > > > > one > > > > > > observation is the same image i can able to mount on > > > > > SUSE. Please > > > > > > give me any suggestions. > > > > > > > > > > > > Cheers, > > > > > > RK > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > > > > > _______________________________________________ > > > > > > Xen-users mailing list > > > > > > Xen-users@lists.xensource.com > > > > > > http://lists.xensource.com/xen-users > > > > > > > > > > -- > > > > > Yves-Gaël Chény > > > > > Directeur technique > > > > > > > > > > 44 Boulevard des Pas Enchantés > > > > > 44230 St Sébastien sur Loire > > > > > Tel : 02 40 97 62 67 - 08 73 77 24 91 > > > > > GSM : 06 98 58 41 55 > > > > > http://www.tranquilitsystems.com/ > > > > > yves-gael.cheny@tranquil-it-systems.fr > > > > > > > > > > Tranquil IT Systems . SAS 37 000 ¤ > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Xen-users mailing list > > > > Xen-users@lists.xensource.com > > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
You need the proper kernel driver and utilities. See if ''ntfs'' is listed in /proc/filesystems.. Then your kernel lacks support for ntfs, or the module is not loaded and needs to be loaded. Try ''modprobe -a ntfs''. If that is not found, you''ll need a kernel with ntfs support. Thanks, Trilok On 8/10/07, trilok nuwal <tc.nuwal@gmail.com> wrote:> > What is yours dom0 is ?. Is it RHEL5? On RHEL5 it is supported. > > On 8/10/07, trilok nuwal <tc.nuwal@gmail.com > wrote: > > > > R u aware of the partitions on the disk WindowsXPSP2-Test.img and file > > system on each partiton. > > > > Tell me the no of partition and file system on each partition. > > > > U cant mount a file disk directly, beacuse windows run as HVM domain and > > use proper partitioning and file sytem on this. so to mount a partition on a > > file disk we use lomount. > > > > #lomount -diskimage <FILE> -partition <NUM> <mountpoint> > > > > Replace <FILE> with disk image and <NUM> with the no like 1,2,3.. and > > finally mountpoint same as mount option. > > > > Thanks, > > -Trilok > > > > > > On 8/10/07, Rama Krishna <hydprk@gmail.com > wrote: > > > > > > Actualluy i want mount domU guest image on dom0. > > > #mount winxp.img /mnt -o loop > > > > > > when i give the above command it is showing some error. > > > Error: > > > [root@test-04 WinXPSP2]# ./mount.sh WindowsXPSP2-Test.img /misc/ -o > > > loop > > > mount: unknown filesystem type ''ntfs'' > > > [root@test-04 WinXPSP2]# > > > > > > > > > > > > On 8/10/07, trilok nuwal < tc.nuwal@gmail.com> wrote: > > > > > > > > Sorry i could help u if u can elaborate yr problem ? > > > > I did get u what u want...... > > > > > > > > On 8/10/07, Rama Krishna < hydprk@gmail.com> wrote: > > > > > > > > > > trying to mount inside the domU a partition from a dom0. > > > > > > > > > > On 8/10/07, Yves-gaël Chény < > > > > > yves-gael.cheny@tranquil-it-systems.fr> wrote: > > > > > > > > > > > > hi > > > > > > > > > > > > if i understand, you want to mount inside the dom0 a disk from a > > > > > > domU ? > > > > > > > > > > > > fdisk -l : > > > > > > > > > > > > what''s the filesystems ? > > > > > > Is-it a disk image or a partiton image ? > > > > > > > > > > > > Regards > > > > > > Yves > > > > > > > > > > > > Rama Krishna a écrit : > > > > > > > Hi friends, > > > > > > > > > > > > > > My problem is Dom-u not mounting on the dom-0. Actually guest > > > > > > the > > > > > > > image was created on SUSE. i have copied that image from SUSE > > > > > > to > > > > > > > RHEL5. now that image dom-u is not mounting on the RHEL5. here > > > > > > one > > > > > > > observation is the same image i can able to mount on > > > > > > SUSE. Please > > > > > > > give me any suggestions. > > > > > > > > > > > > > > Cheers, > > > > > > > RK > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > > > > > > > _______________________________________________ > > > > > > > Xen-users mailing list > > > > > > > Xen-users@lists.xensource.com > > > > > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > -- > > > > > > Yves-Gaël Chény > > > > > > Directeur technique > > > > > > > > > > > > 44 Boulevard des Pas Enchantés > > > > > > 44230 St Sébastien sur Loire > > > > > > Tel : 02 40 97 62 67 - 08 73 77 24 91 > > > > > > GSM : 06 98 58 41 55 > > > > > > http://www.tranquilitsystems.com/ > > > > > > yves-gael.cheny@tranquil-it-systems.fr > > > > > > > > > > > > Tranquil IT Systems . SAS 37 000 ¤ > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Xen-users mailing list > > > > > Xen-users@lists.xensource.com > > > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > > > > > > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
You could either try to install a kernel ntfs module, or you could install the FUSE-based ntfs-3g filesystem. Right now the problem is that your Linux can''t read Windows filesystems at all, so it doesn''t understand what to do with this image. Cheers, Mark On Friday 10 August 2007, trilok nuwal wrote:> You need the proper kernel driver and utilities. See if ''ntfs'' is listed in > /proc/filesystems.. > > Then your kernel lacks support for ntfs, or the module is not loaded and > needs to be loaded. > > Try ''modprobe -a ntfs''. If that is not found, you''ll need a kernel with > ntfs support. > > Thanks, > Trilok > > On 8/10/07, trilok nuwal <tc.nuwal@gmail.com> wrote: > > What is yours dom0 is ?. Is it RHEL5? On RHEL5 it is supported. > > > > On 8/10/07, trilok nuwal <tc.nuwal@gmail.com > wrote: > > > R u aware of the partitions on the disk WindowsXPSP2-Test.img and file > > > system on each partiton. > > > > > > Tell me the no of partition and file system on each partition. > > > > > > U cant mount a file disk directly, beacuse windows run as HVM domain > > > and use proper partitioning and file sytem on this. so to mount a > > > partition on a file disk we use lomount. > > > > > > #lomount -diskimage <FILE> -partition <NUM> <mountpoint> > > > > > > Replace <FILE> with disk image and <NUM> with the no like 1,2,3.. and > > > finally mountpoint same as mount option. > > > > > > Thanks, > > > -Trilok > > > > > > On 8/10/07, Rama Krishna <hydprk@gmail.com > wrote: > > > > Actualluy i want mount domU guest image on dom0. > > > > #mount winxp.img /mnt -o loop > > > > > > > > when i give the above command it is showing some error. > > > > Error: > > > > [root@test-04 WinXPSP2]# ./mount.sh WindowsXPSP2-Test.img /misc/ -o > > > > loop > > > > mount: unknown filesystem type ''ntfs'' > > > > [root@test-04 WinXPSP2]# > > > > > > > > On 8/10/07, trilok nuwal < tc.nuwal@gmail.com> wrote: > > > > > Sorry i could help u if u can elaborate yr problem ? > > > > > I did get u what u want...... > > > > > > > > > > On 8/10/07, Rama Krishna < hydprk@gmail.com> wrote: > > > > > > trying to mount inside the domU a partition from a dom0. > > > > > > > > > > > > On 8/10/07, Yves-gaël Chény < > > > > > > > > > > > > yves-gael.cheny@tranquil-it-systems.fr> wrote: > > > > > > > hi > > > > > > > > > > > > > > if i understand, you want to mount inside the dom0 a disk from > > > > > > > a domU ? > > > > > > > > > > > > > > fdisk -l : > > > > > > > > > > > > > > what''s the filesystems ? > > > > > > > Is-it a disk image or a partiton image ? > > > > > > > > > > > > > > Regards > > > > > > > Yves > > > > > > > > > > > > > > Rama Krishna a écrit : > > > > > > > > Hi friends, > > > > > > > > > > > > > > > > My problem is Dom-u not mounting on the dom-0. Actually guest > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > image was created on SUSE. i have copied that image from SUSE > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > RHEL5. now that image dom-u is not mounting on the RHEL5. > > > > > > > > here > > > > > > > > > > > > > > one > > > > > > > > > > > > > > > observation is the same image i can able to mount on > > > > > > > > > > > > > > SUSE. Please > > > > > > > > > > > > > > > give me any suggestions. > > > > > > > > > > > > > > > > Cheers, > > > > > > > > RK > > > > > > > > > > > > > > --------------------------------------------------------------- > > > > > > >--------- > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Xen-users mailing list > > > > > > > > Xen-users@lists.xensource.com > > > > > > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > > > -- > > > > > > > Yves-Gaël Chény > > > > > > > Directeur technique > > > > > > > > > > > > > > 44 Boulevard des Pas Enchantés > > > > > > > 44230 St Sébastien sur Loire > > > > > > > Tel : 02 40 97 62 67 - 08 73 77 24 91 > > > > > > > GSM : 06 98 58 41 55 > > > > > > > http://www.tranquilitsystems.com/ > > > > > > > yves-gael.cheny@tranquil-it-systems.fr > > > > > > >Try ''modprobe -a ntfs''. If that is not found, you''ll need akernel with ntfs support.;> > > > > > > Tranquil IT Systems . SAS 37 000 ¤ > > > > > > > > > > > > _______________________________________________ > > > > > > Xen-users mailing list > > > > > > Xen-users@lists.xensource.com > > > > > > http://lists.xensource.com/xen-users-- Dave: Just a question. What use is a unicyle with no seat? And no pedals! Mark: To answer a question with a question: What use is a skateboard? Dave: Skateboards have wheels. Mark: My wheel has a wheel! _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users