Derek
2007-Jul-19 02:48 UTC
[Xen-users] Correction: Hotplug scripts not working (error starting DomU)
Correction: I wrote...> By the way, I''m pretty sure my hotplug scrips are indeed NOT working. > Used to be when I did a "tail -v /var/log/messages" and then plugged > and unplugged usb devices, there were messages for each connection > and disconnection. Now, I see no such messages when I plug/unplug > USB devices. But I don''t know what I did to break them, or how to fixthem! I think this is a red herring. I tried it again, and in fact it _does_ report attachment and detachment of USB devices. I had accidentally unplugged the wrong device when I tried it the first time, from a hub attached to a different computer! Sorry for the misinformation. Derek. On 7/18/07, Derek <xen@sherlockmail.com> wrote:> > Hi all, > > I can no longer start my windows domU under xen. Googling the error > message it seems this is a common problem, but from a huge diversity of > causes, none of which help me figure things out. > > The message I see when I start my domU (winxp) is: > > Error: Device 5632 (vbd) could not be connected. Hotplug scripts not > working. > > This occurs about 30 seconds after starting the domain. xm list during > that time shows the domain paused. If you unpause it, you see some windows > boot activity, but you still get the same message and failure at about the > 30 second mark. > > This is on a system that was previously working. It has been running > continuously for about a month, and this occurred right after the last > reboot. I can''t think of any configuration changes I have made since it > last worked OK, although I suppose there might be some. > > By the way, I''m pretty sure my hotplug scrips are indeed NOT working. > Used to be when I did a "tail -v /var/log/messages" and then plugged and > unplugged usb devices, there were messages for each connection and > disconnection. Now, I see no such messages when I plug/unplug USB devices. > But I don''t know what I did to break them, or how to fix them! > > "/etc/init.d/hotplug restart" works fine without error, but does not fix > the problem. > > Any pointers would be appreciated. > > Thanks, > Derek. > > > My system is: > > Running xen-3.0.4 under Gentoo x86 > > uname -a > Linux localhost 2.6.16.33-xen #25 SMP Mon Feb 12 13:57:39 MST 2007 i686 > Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz GenuineIntel GNU/Linux > > > My HVM domiain config file is: > > import os, re > arch = os.uname()[4] > if re.search(''64'', arch): > arch_libdir = ''lib64'' > else: > arch_libdir = ''lib'' > kernel = "/usr/lib/xen/boot/hvmloader" > builder=''hvm'' > memory = 512 > name = "WindowsXP" > usb = 1 > usbdevice = "tablet" > vif = [ ''type=ioemu, mac=00:16:3e:00:00:94, bridge=xenbr0'' ] > disk = [ ''phy:/dev/main/win_xp_guest_domain,hda,w'', > ''phy:/dev/cdrom,hdc:cdrom,r''] > device_model = ''/usr/'' + arch_libdir + ''/xen/bin/qemu-dm'' > boot="c" > sdl=1 > vnc=0 > vncviewer=0 > stdvga=0 > serial=''pty'' > ne2000=0 > audio=1 > soundhw=''all'' > localtime=0 > > > > xm dmesg seems uneventful: > __ __ _____ ___ _ _ _ > \ \/ /___ _ __ |___ / / _ \| || | / | > \ // _ \ ''_ \ |_ \| | | | || |_ __| | > / \ __/ | | | ___) | |_| |__ _|__| | > /_/\_\___|_| |_| |____(_)___(_) |_| |_| > > http://www.cl.cam.ac.uk/netos/xen > University of Cambridge Computer Laboratory > > Xen version 3.0.4-1 (root@) (gcc version 3.4.6 (Gentoo 3.4.6-r1, > ssp-3.4.5-1.0, pie-8.7.9)) Tue Jan 23 22:14:27 MST 2007 > Latest ChangeSet: unavailable > > (XEN) Command line: (hd0,0)/xen-3.0.4-1.gz dom0_mem=262144 > (XEN) Physical RAM map: > (XEN) 0000000000000000 - 000000000009d800 (usable) > (XEN) 000000000009d800 - 00000000000a0000 (reserved) > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000007fedf800 (usable) > (XEN) 000000007fedf800 - 000000007fee0000 (reserved) > (XEN) 000000007fee0000 - 000000007fee3000 (ACPI NVS) > (XEN) 000000007fee3000 - 000000007fef0000 (ACPI data) > (XEN) 000000007fef0000 - 000000007ff00000 (reserved) > (XEN) 00000000f0000000 - 00000000f4000000 (reserved) > (XEN) 00000000fec00000 - 0000000100000000 (reserved) > (XEN) System RAM: 2046MB (2095600kB) > (XEN) ACPI: RSDP (v000 HP-CPC ) @ > 0x000f7cf0 > (XEN) ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > 0x7fee3040 > (XEN) ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > 0x7fee30c0 > (XEN) ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > 0x7fee77c0 > (XEN) ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > 0x7fee76c0 > (XEN) ACPI: SSDT (v001 HP-CPC Cpu0Ist 0x00003000 INTL 0x20040311) @ > 0x7fee7840 > (XEN) ACPI: SSDT (v001 HP-CPC CpuPm 0x00003000 INTL 0x20040311) @ > 0x7fee7cd0 > (XEN) ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ > 0x00000000 > (XEN) NUMA turned off > (XEN) Faking a node at 0000000000000000-000000007fedf000 > (XEN) Domain heap initialised: DMA width 30 bits > (XEN) Xen heap: 10MB (10320kB) > (XEN) PAE disabled. > (XEN) found SMP MP-table at 000f5f90 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > (XEN) Processor #0 6:15 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > (XEN) Processor #1 6:15 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Initializing CPU#0 > (XEN) Detected 2133.454 MHz processor. > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > (XEN) CPU: L2 cache: 2048K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU: Processor Core ID: 0 > (XEN) VMXON is done > (XEN) Intel machine check architecture supported. > (XEN) Intel machine check reporting enabled on CPU#0. > (XEN) CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 > (XEN) Mapping cpu 0 to node 255 > (XEN) Booting processor 1/1 eip 90000 > (XEN) Initializing CPU#1 > (XEN) Mapping cpu 1 to node 255 > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > (XEN) CPU: L2 cache: 2048K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU: Processor Core ID: 1 > (XEN) VMXON is done > (XEN) Intel machine check architecture supported. > (XEN) Intel machine check reporting enabled on CPU#1. > (XEN) CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 > (XEN) Total of 2 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) checking TSC synchronization across 2 CPUs: passed. > (XEN) Platform timer is 1.193MHz PIT > (XEN) Brought up 2 CPUs > (XEN) Machine check exception polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Domain 0 kernel supports features = { 0000001f }. > (XEN) Domain 0 kernel requires features = { 00000000 }. > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 03000000->04000000 (61440 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c0100000->c05d7c68 > (XEN) Init. ramdisk: c05d8000->c0ab5000 > (XEN) Phys-Mach map: c0ab5000->c0af5000 > (XEN) Start info: c0af5000->c0af546c > (XEN) Page tables: c0af6000->c0afa000 > (XEN) Boot stack: c0afa000->c0afb000 > (XEN) TOTAL: c0000000->c0c00000 > (XEN) ENTRY ADDRESS: c0100000 > (XEN) Dom0 has maximum 2 VCPUs > (XEN) Initrd len 0x4dd000, start at 0xc05d8000 > (XEN) Scrubbing Free RAM: ..................done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input > to Xen). > > > > dmesg says this: > > Linux version 2.6.16.33-xen (root@localhost) (gcc version 3.4.6 (Gentoo > 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #25 SMP Mon Feb 12 13:57:39 MST 2007 > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 0000000010800000 (usable) > 0MB HIGHMEM available. > 264MB LOWMEM available. > On node 0 totalpages: 67584 > DMA zone: 67584 pages, LIFO batch:15 > DMA32 zone: 0 pages, LIFO batch:0 > Normal zone: 0 pages, LIFO batch:0 > HighMem zone: 0 pages, LIFO batch:0 > found SMP MP-table at 000f5f90 > DMI present. > ACPI: RSDP (v000 HP-CPC ) @ 0x000f7cf0 > ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee3040 > ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee30c0 > ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee77c0 > ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee76c0 > ACPI: SSDT (v001 HP-CPC Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x7fee7840 > ACPI: SSDT (v001 HP-CPC CpuPm 0x00003000 INTL 0x20040311) @ 0x7fee7cd0 > ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) > Built 1 zonelists > Kernel command line: udev dolvm2 root=/dev/ram0 > lvm2root=/dev/mapper/main-gentoo_x86_root > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c0576000 soft=c056e000 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Xen reported: 2133.454 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Software IO TLB enabled: > Aperture: 2 megabytes > Kernel range: 0x00000000c0afe000 - 0x00000000c0cfe000 > Address size: 30 bits > vmalloc area: d1000000-fb7fe000, maxmem 33ffe000 > Memory: 246400k/270336k available (3264k kernel code, 15416k reserved, > 1048k data, 200k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... > Ok. > Calibrating delay using timer specific routine.. 5335.87 BogoMIPS > (lpj=10671741) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 > 0000e3bd 00000000 00000001 > CPU: After vendor identify, caps: bfebd3f1 20100000 00000000 00000000 > 0000e3bd 00000000 00000001 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: After all inits, caps: bfebd3f1 20100000 00000000 00000140 0000e3bd > 00000000 00000001 > Checking ''hlt'' instruction... OK. > CPU 1 irqstacks, hard=c0577000 soft=c056f000 > ENABLING IO-APIC IRQs > Brought up 2 CPUs > Initializing CPU#1 > migration_cost=10 > checking if image is initramfs...it isn''t (bad gzip magic numbers); looks > like an initrd > Freeing initrd memory: 4980k freed > Grant table initialized > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG > ACPI: Subsystem revision 20060127 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 13 devices > xen_mem: Initialising balloon driver. > SCSI subsystem initialized > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn''t work, try "pci=routeirq". If it helps, post a > report > pnp: 00:09: ioport range 0x400-0x4bf could not be reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: fa000000-fcffffff > PREFETCH window: e0000000-efffffff > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: d000-dfff > MEM window: fdb00000-fddfffff > PREFETCH window: fde00000-fdefffff > ACPI: PCI Interrupt 0000:00: 01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00: 1c.0 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > audit: initializing netlink socket (disabled) > audit(1188261457.032:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > JFS: nTxBlock = 2048, nTxLock = 16384 > SGI XFS with ACLs, security attributes, realtime, large block numbers, no > debug enabled > SGI XFS Quota Management subsystem > Initializing Cryptographic API > io scheduler noop registered > io scheduler deadline registered (default) > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > Allocate Port Service[0000:00:01.0:pcie03] > ACPI: PCI Interrupt 0000:00: 1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00: 1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > loop: loaded (max 8 devices) > e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > ACPI: PCI Interrupt 0000:03: 04.0[A] -> GSI 16 (level, low) -> IRQ 16 > e100: eth0: e100_probe: addr 0xfdeff000, irq 16, MAC addr > 00:60:B0:1A:46:42 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky < maxk@qualcomm.com> > Xen virtual console successfully installed as ttyS0 > Event-channel device installed. > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > Probing IDE interface ide0... > Probing IDE interface ide1... > libata version 1.20 loaded. > ahci 0000:00:1f.2: version 1.2 > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00: 1f.2 to 64 > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA > mode > ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part > ata1: SATA max UDMA/133 cmd 0xD100E100 ctl 0x0 bmdma 0x0 irq 17 > ata2: SATA max UDMA/133 cmd 0xD100E180 ctl 0x0 bmdma 0x0 irq 17 > ata3: SATA max UDMA/133 cmd 0xD100E200 ctl 0x0 bmdma 0x0 irq 17 > ata4: SATA max UDMA/133 cmd 0xD100E280 ctl 0x0 bmdma 0x0 irq 17 > ata5: SATA max UDMA/133 cmd 0xD100E300 ctl 0x0 bmdma 0x0 irq 17 > ata6: SATA max UDMA/133 cmd 0xD100E380 ctl 0x0 bmdma 0x0 irq 17 > ata1: SATA link up 3.0 Gbps (SStatus 123) > ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4123 85:7469 86:bc01 87:4123 > 88:40ff > ata1: dev 0 ATA-8, max UDMA7, 976773168 sectors: LBA48 > ata1: dev 0 configured for UDMA/133 > scsi0 : ahci > ata2: SATA link up 3.0 Gbps (SStatus 123) > ata2: dev 0 cfg 49:2f00 82:7469 83:7f61 84:4163 85:7469 86:3c41 87:4163 > 88:407f > ata2: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48 > ata2: dev 0 configured for UDMA/133 > scsi1 : ahci > ata3: SATA link up 1.5 Gbps (SStatus 113) > ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 > 88:0007 > ata3: dev 0 ATAPI, max UDMA/33 > ata3: dev 0 configured for UDMA/33 > scsi2 : ahci > ata4: SATA link down (SStatus 0) > scsi3 : ahci > ata5: SATA link up 1.5 Gbps (SStatus 113) > ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e21 87:4663 > 88:007f > ata5: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48 > ata5: dev 0 configured for UDMA/133 > scsi4 : ahci > ata6: SATA link down (SStatus 0) > scsi5 : ahci > Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10 > Type: Direct-Access ANSI SCSI revision: 05 > Vendor: ATA Model: WDC WD5000YS-01M Rev: 07.0 > Type: Direct-Access ANSI SCSI revision: 05 > Vendor: HL-DT-ST Model: DVDRRW GSA-H30L Rev: S544 > Type: CD-ROM ANSI SCSI revision: 05 > Vendor: ATA Model: Maxtor 6L300S0 Rev: BACE > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 > sd 0:0:0:0: Attached scsi disk sda > SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > sdb: sdb1 sdb2 > sd 1:0:0:0: Attached scsi disk sdb > SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB) > sdc: Write Protect is off > sdc: Mode Sense: 00 3a 00 00 > SCSI device sdc: drive cache: write back > SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB) > sdc: Write Protect is off > sdc: Mode Sense: 00 3a 00 00 > SCSI device sdc: drive cache: write back > sdc: sdc1 sdc2 sdc3 sdc4 > sd 4:0:0:0: Attached scsi disk sdc > ata3: translated ATA stat/err 0x51/60 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 2:0:0:0: Attached scsi CD-ROM sr0 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 1:0:0:0: Attached scsi generic sg1 type 0 > sr 2:0:0:0: Attached scsi generic sg2 type 5 > sd 4:0:0:0: Attached scsi generic sg3 type 0 > ieee1394: Initialized config rom entry `ip1394'' > ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 20 (level, low) -> IRQ 18 > ohci1394: fw-host0: Unexpected PCI resource length of 1000! > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] > MMIO=[fddff000-fddff7ff] Max Packet=[1024] IR/IT contexts=[8/8] > ACPI: PCI Interrupt 0000:00:1a.7[A] -> GSI 23 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00: 1a.7 to 64 > ehci_hcd 0000:00:1a.7: EHCI Host Controller > PCI: cache line size of 32 is not supported by device 0000:00:1a.7 > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.7 : irq 19, io mem 0xfdffe000 > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > ACPI: PCI Interrupt 0000:00: 1d.7[A] -> GSI 23 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffd000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > ohci_hcd: 2005 April 22 USB 1.1 ''Open'' Host Controller (OHCI) Driver (PCI) > USB Universal Host Controller Interface driver v2.3 > ACPI: PCI Interrupt 0000:00: 1a.0[A] -> GSI 23 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1a.0 to 64 > uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.0: irq 19, io base 0x0000fe00 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 19 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1a.1 to 64 > uhci_hcd 0000:00:1a.1: UHCI Host Controller > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fd00 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00: 1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fc00 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00: 1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 > uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fb00 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > usb 2-2: new high speed USB device using ehci_hcd and address 2 > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00: 1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fa00 > usb usb7: configuration #1 chosen from 1 choice > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > usb 2-2: configuration #1 chosen from 1 choice > hub 2-2:1.0: USB hub found > hub 2-2:1.0: 4 ports detected > Initializing USB Mass Storage driver... > usb 4-1: new full speed USB device using uhci_hcd and address 2 > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c34717] > usb 4-1: configuration #1 chosen from 1 choice > usb 7-1: new full speed USB device using uhci_hcd and address 2 > usb 7-1: configuration #1 chosen from 1 choice > hub 7-1:1.0: USB hub found > hub 7-1:1.0: 4 ports detected > usb 2-2.1: new low speed USB device using ehci_hcd and address 4 > usb 2-2.1: configuration #1 chosen from 1 choice > scsi6 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > usb 7-1.1: new low speed USB device using uhci_hcd and address 3 > usb 7-1.1: configuration #1 chosen from 1 choice > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > usbcore: registered new driver hiddev > hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1500 > LCD FW: 837.H4 .D USB FW:H4 ] on usb-0000:00:1d.7-2.1 > input: ATEN ATEN-COMPOSITE as /class/input/input0 > input: USB HID v1.10 Keyboard [ATEN ATEN-COMPOSITE] on usb-0000:00: > 1d.2-1.1 > input: ATEN ATEN-COMPOSITE as /class/input/input1 > input: USB HID v1.10 Mouse [ATEN ATEN-COMPOSITE] on usb-0000:00:1d.2-1.1 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > mice: PS/2 mouse device common for all mice > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com > NET: Registered protocol family 2 > input: AT Translated Set 2 keyboard as /class/input/input2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > IPv4 over IPv4 tunneling driver > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI Shortcut mode > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > RAMDISK: ext2 filesystem found at block 0 > RAMDISK: Loading 4980KiB [1 disk] into ram disk... done. > EXT2-fs warning: checktime reached, running e2fsck is recommended > VFS: Mounted root (ext2 filesystem). > Freeing unused kernel memory: 200k freed > logips2pp: Detected unknown logitech mouse model 0 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > input: PS/2 Logitech Mouse as /class/input/input3 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > ata3: no sense translation for error 0x20 > ata3: no sense translation for status: 0x51 > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > Vendor: Generic Model: USB SD Reader Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 00 > sd 6:0:0:0: Attached scsi removable disk sdd > sd 6:0:0:0: Attached scsi generic sg4 type 0 > Vendor: Generic Model: USB CF Reader Rev: 1.01 > Type: Direct-Access ANSI SCSI revision: 00 > sd 6:0:0:1: Attached scsi removable disk sde > sd 6:0:0:1: Attached scsi generic sg5 type 0 > Vendor: Generic Model: USB SM Reader Rev: 1.02 > Type: Direct-Access ANSI SCSI revision: 00 > sd 6:0:0:2: Attached scsi removable disk sdf > sd 6:0:0:2: Attached scsi generic sg6 type 0 > Vendor: Generic Model: USB MS Reader Rev: 1.03 > Type: Direct-Access ANSI SCSI revision: 00 > sd 6:0:0:3: Attached scsi removable disk sdg > sd 6:0:0:3: Attached scsi generic sg7 type 0 > usb-storage: device scan complete > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > hw_random hardware driver 1.0.0 loaded > hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... > EXT3 FS on dm-9, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-0, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 2097144k swap on /dev/mapper/main-swap. Priority:-1 extents:1 > across:2097144k > Real Time Clock Driver v1.12ac > e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex > device vif0.0 entered promiscuous mode > xenbr0: port 1(vif0.0) entering learning state > xenbr0: topology change detected, propagating > xenbr0: port 1(vif0.0) entering forwarding state > e100: peth0: e100_watchdog: link up, 100Mbps, full-duplex > device peth0 entered promiscuous mode > xenbr0: port 2(peth0) entering learning state > xenbr0: topology change detected, propagating > xenbr0: port 2(peth0) entering forwarding state > device tap0 entered promiscuous mode > device vif1.0 entered promiscuous mode > xenbr0: port 3(tap0) entering learning state > xenbr0: topology change detected, propagating > xenbr0: port 3(tap0) entering forwarding state > xenbr0: port 4(vif1.0) entering disabled state > device vif1.0 left promiscuous mode > xenbr0: port 4(vif1.0) entering disabled state > xenbr0: port 3(tap0) entering disabled state > device tap0 left promiscuous mode > xenbr0: port 3(tap0) entering disabled state > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Derek
2007-Jul-19 18:06 UTC
[Xen-users] Re: Correction: Hotplug scripts not working (error starting DomU)
One more relevent fact.... The problem has something to do with the CDROM. When I remove the cdrom from the "vif=[...]" line in the config file, the domU starts up and runs perfectly. Derek. On 7/18/07, Derek <xen@sherlockmail.com> wrote:> > Correction: > > I wrote... > > > By the way, I''m pretty sure my hotplug scrips are indeed NOT working. > > Used to be when I did a "tail -v /var/log/messages" and then plugged > > and unplugged usb devices, there were messages for each connection > > and disconnection. Now, I see no such messages when I plug/unplug > > USB devices. But I don''t know what I did to break them, or how to fix > them! > > I think this is a red herring. I tried it again, and in fact it _does_ > report attachment and detachment of USB devices. I had accidentally > unplugged the wrong device when I tried it the first time, from a hub > attached to a different computer! Sorry for the misinformation. > > Derek. > > > On 7/18/07, Derek <xen@sherlockmail.com> wrote: > > > > Hi all, > > > > I can no longer start my windows domU under xen. Googling the error > > message it seems this is a common problem, but from a huge diversity of > > causes, none of which help me figure things out. > > > > The message I see when I start my domU (winxp) is: > > > > Error: Device 5632 (vbd) could not be connected. Hotplug scripts not > > working. > > > > This occurs about 30 seconds after starting the domain. xm list during > > that time shows the domain paused. If you unpause it, you see some windows > > boot activity, but you still get the same message and failure at about the > > 30 second mark. > > > > This is on a system that was previously working. It has been running > > continuously for about a month, and this occurred right after the last > > reboot. I can''t think of any configuration changes I have made since it > > last worked OK, although I suppose there might be some. > > > > By the way, I''m pretty sure my hotplug scrips are indeed NOT working. > > Used to be when I did a "tail -v /var/log/messages" and then plugged and > > unplugged usb devices, there were messages for each connection and > > disconnection. Now, I see no such messages when I plug/unplug USB devices. > > But I don''t know what I did to break them, or how to fix them! > > > > "/etc/init.d/hotplug restart" works fine without error, but does not fix > > the problem. > > > > Any pointers would be appreciated. > > > > Thanks, > > Derek. > > > > > > My system is: > > > > Running xen-3.0.4 under Gentoo x86 > > > > uname -a > > Linux localhost 2.6.16.33-xen #25 SMP Mon Feb 12 13:57:39 MST 2007 i686 > > Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz GenuineIntel GNU/Linux > > > > > > My HVM domiain config file is: > > > > import os, re > > arch = os.uname()[4] > > if re.search(''64'', arch): > > arch_libdir = ''lib64'' > > else: > > arch_libdir = ''lib'' > > kernel = "/usr/lib/xen/boot/hvmloader" > > builder=''hvm'' > > memory = 512 > > name = "WindowsXP" > > usb = 1 > > usbdevice = "tablet" > > vif = [ ''type=ioemu, mac=00:16:3e:00:00:94, bridge=xenbr0'' ] > > disk = [ ''phy:/dev/main/win_xp_guest_domain,hda,w'', > > ''phy:/dev/cdrom,hdc:cdrom,r''] > > device_model = ''/usr/'' + arch_libdir + ''/xen/bin/qemu-dm'' > > boot="c" > > sdl=1 > > vnc=0 > > vncviewer=0 > > stdvga=0 > > serial=''pty'' > > ne2000=0 > > audio=1 > > soundhw=''all'' > > localtime=0 > > > > > > > > xm dmesg seems uneventful: > > __ __ _____ ___ _ _ _ > > \ \/ /___ _ __ |___ / / _ \| || | / | > > \ // _ \ ''_ \ |_ \| | | | || |_ __| | > > / \ __/ | | | ___) | |_| |__ _|__| | > > /_/\_\___|_| |_| |____(_)___(_) |_| |_| > > > > http://www.cl.cam.ac.uk/netos/xen > > University of Cambridge Computer Laboratory > > > > Xen version 3.0.4-1 (root@) (gcc version 3.4.6 (Gentoo 3.4.6-r1, > > ssp-3.4.5-1.0, pie-8.7.9)) Tue Jan 23 22:14:27 MST 2007 > > Latest ChangeSet: unavailable > > > > (XEN) Command line: (hd0,0)/xen-3.0.4-1.gz dom0_mem=262144 > > (XEN) Physical RAM map: > > (XEN) 0000000000000000 - 000000000009d800 (usable) > > (XEN) 000000000009d800 - 00000000000a0000 (reserved) > > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > > (XEN) 0000000000100000 - 000000007fedf800 (usable) > > (XEN) 000000007fedf800 - 000000007fee0000 (reserved) > > (XEN) 000000007fee0000 - 000000007fee3000 (ACPI NVS) > > (XEN) 000000007fee3000 - 000000007fef0000 (ACPI data) > > (XEN) 000000007fef0000 - 000000007ff00000 (reserved) > > (XEN) 00000000f0000000 - 00000000f4000000 (reserved) > > (XEN) 00000000fec00000 - 0000000100000000 (reserved) > > (XEN) System RAM: 2046MB (2095600kB) > > (XEN) ACPI: RSDP (v000 HP-CPC ) @ > > 0x000f7cf0 > > (XEN) ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee3040 > > (XEN) ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee30c0 > > (XEN) ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee77c0 > > (XEN) ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee76c0 > > (XEN) ACPI: SSDT (v001 HP-CPC Cpu0Ist 0x00003000 INTL 0x20040311) @ > > 0x7fee7840 > > (XEN) ACPI: SSDT (v001 HP-CPC CpuPm 0x00003000 INTL 0x20040311) @ > > 0x7fee7cd0 > > (XEN) ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ > > 0x00000000 > > (XEN) NUMA turned off > > (XEN) Faking a node at 0000000000000000-000000007fedf000 > > (XEN) Domain heap initialised: DMA width 30 bits > > (XEN) Xen heap: 10MB (10320kB) > > (XEN) PAE disabled. > > (XEN) found SMP MP-table at 000f5f90 > > (XEN) DMI present. > > (XEN) Using APIC driver default > > (XEN) ACPI: Local APIC address 0xfee00000 > > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > (XEN) Processor #0 6:15 APIC version 20 > > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > > (XEN) Processor #1 6:15 APIC version 20 > > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > > (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > > (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > > (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > > (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > > (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > (XEN) ACPI: IRQ0 used by override. > > (XEN) ACPI: IRQ2 used by override. > > (XEN) ACPI: IRQ9 used by override. > > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > > (XEN) Using ACPI (MADT) for SMP configuration information > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > (XEN) Initializing CPU#0 > > (XEN) Detected 2133.454 MHz processor. > > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > > (XEN) CPU: L2 cache: 2048K > > (XEN) CPU: Physical Processor ID: 0 > > (XEN) CPU: Processor Core ID: 0 > > (XEN) VMXON is done > > (XEN) Intel machine check architecture supported. > > (XEN) Intel machine check reporting enabled on CPU#0. > > (XEN) CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 > > (XEN) Mapping cpu 0 to node 255 > > (XEN) Booting processor 1/1 eip 90000 > > (XEN) Initializing CPU#1 > > (XEN) Mapping cpu 1 to node 255 > > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > > (XEN) CPU: L2 cache: 2048K > > (XEN) CPU: Physical Processor ID: 0 > > (XEN) CPU: Processor Core ID: 1 > > (XEN) VMXON is done > > (XEN) Intel machine check architecture supported. > > (XEN) Intel machine check reporting enabled on CPU#1. > > (XEN) CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 > > (XEN) Total of 2 processors activated. > > (XEN) ENABLING IO-APIC IRQs > > (XEN) -> Using new ACK method > > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > > (XEN) checking TSC synchronization across 2 CPUs: passed. > > (XEN) Platform timer is 1.193MHz PIT > > (XEN) Brought up 2 CPUs > > (XEN) Machine check exception polling timer started. > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) Domain 0 kernel supports features = { 0000001f }. > > (XEN) Domain 0 kernel requires features = { 00000000 }. > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > (XEN) Dom0 alloc.: 03000000->04000000 (61440 pages to be allocated) > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > (XEN) Loaded kernel: c0100000->c05d7c68 > > (XEN) Init. ramdisk: c05d8000->c0ab5000 > > (XEN) Phys-Mach map: c0ab5000->c0af5000 > > (XEN) Start info: c0af5000->c0af546c > > (XEN) Page tables: c0af6000->c0afa000 > > (XEN) Boot stack: c0afa000->c0afb000 > > (XEN) TOTAL: c0000000->c0c00000 > > (XEN) ENTRY ADDRESS: c0100000 > > (XEN) Dom0 has maximum 2 VCPUs > > (XEN) Initrd len 0x4dd000, start at 0xc05d8000 > > (XEN) Scrubbing Free RAM: ..................done. > > (XEN) Xen trace buffers: disabled > > (XEN) Std. Loglevel: Errors and warnings > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > (XEN) Xen is relinquishing VGA console. > > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch > > input to Xen). > > > > > > > > dmesg says this: > > > > Linux version 2.6.16.33-xen (root@localhost) (gcc version 3.4.6 (Gentoo > > 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #25 SMP Mon Feb 12 13:57:39 MST > > 2007 > > BIOS-provided physical RAM map: > > Xen: 0000000000000000 - 0000000010800000 (usable) > > 0MB HIGHMEM available. > > 264MB LOWMEM available. > > On node 0 totalpages: 67584 > > DMA zone: 67584 pages, LIFO batch:15 > > DMA32 zone: 0 pages, LIFO batch:0 > > Normal zone: 0 pages, LIFO batch:0 > > HighMem zone: 0 pages, LIFO batch:0 > > found SMP MP-table at 000f5f90 > > DMI present. > > ACPI: RSDP (v000 HP-CPC ) @ 0x000f7cf0 > > ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee3040 > > ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee30c0 > > ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee77c0 > > ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ > > 0x7fee76c0 > > ACPI: SSDT (v001 HP-CPC Cpu0Ist 0x00003000 INTL 0x20040311) @ > > 0x7fee7840 > > ACPI: SSDT (v001 HP-CPC CpuPm 0x00003000 INTL 0x20040311) @ > > 0x7fee7cd0 > > ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ > > 0x00000000 > > ACPI: Local APIC address 0xfee00000 > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > > ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > > IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > ACPI: IRQ0 used by override. > > ACPI: IRQ2 used by override. > > ACPI: IRQ9 used by override. > > Enabling APIC mode: Flat. Using 1 I/O APICs > > Using ACPI (MADT) for SMP configuration information > > Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) > > Built 1 zonelists > > Kernel command line: udev dolvm2 root=/dev/ram0 > > lvm2root=/dev/mapper/main-gentoo_x86_root > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Initializing CPU#0 > > CPU 0 irqstacks, hard=c0576000 soft=c056e000 > > PID hash table entries: 2048 (order: 11, 32768 bytes) > > Xen reported: 2133.454 MHz processor. > > Console: colour VGA+ 80x25 > > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > > Software IO TLB enabled: > > Aperture: 2 megabytes > > Kernel range: 0x00000000c0afe000 - 0x00000000c0cfe000 > > Address size: 30 bits > > vmalloc area: d1000000-fb7fe000, maxmem 33ffe000 > > Memory: 246400k/270336k available (3264k kernel code, 15416k reserved, > > 1048k data, 200k init, 0k highmem) > > Checking if this processor honours the WP bit even in supervisor mode... > > Ok. > > Calibrating delay using timer specific routine.. 5335.87 BogoMIPS > > (lpj=10671741) > > Mount-cache hash table entries: 512 > > CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 > > 0000e3bd 00000000 00000001 > > CPU: After vendor identify, caps: bfebd3f1 20100000 00000000 00000000 > > 0000e3bd 00000000 00000001 > > CPU: L1 I cache: 32K, L1 D cache: 32K > > CPU: L2 cache: 2048K > > CPU: After all inits, caps: bfebd3f1 20100000 00000000 00000140 0000e3bd > > 00000000 00000001 > > Checking ''hlt'' instruction... OK. > > CPU 1 irqstacks, hard=c0577000 soft=c056f000 > > ENABLING IO-APIC IRQs > > Brought up 2 CPUs > > Initializing CPU#1 > > migration_cost=10 > > checking if image is initramfs...it isn''t (bad gzip magic numbers); > > looks like an initrd > > Freeing initrd memory: 4980k freed > > Grant table initialized > > NET: Registered protocol family 16 > > ACPI: bus type pci registered > > PCI: Using MMCONFIG > > ACPI: Subsystem revision 20060127 > > ACPI: Interpreter enabled > > ACPI: Using IOAPIC for interrupt routing > > ACPI: PCI Root Bridge [PCI0] (0000:00) > > PCI: Probing PCI hardware (bus 00) > > Boot video device is 0000:01:00.0 > > PCI: Transparent bridge - 0000:00:1e.0 > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) > > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > > disabled. > > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > > disabled. > > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) > > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15) > > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > > disabled. > > ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15) > > ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, > > disabled. > > Linux Plug and Play Support v0.97 (c) Adam Belay > > pnp: PnP ACPI init > > pnp: PnP ACPI: found 13 devices > > xen_mem: Initialising balloon driver. > > SCSI subsystem initialized > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > PCI: Using ACPI for IRQ routing > > PCI: If a device doesn''t work, try "pci=routeirq". If it helps, post a > > report > > pnp: 00:09: ioport range 0x400-0x4bf could not be reserved > > PCI: Bridge: 0000:00:01.0 > > IO window: disabled. > > MEM window: fa000000-fcffffff > > PREFETCH window: e0000000-efffffff > > PCI: Bridge: 0000:00:1c.0 > > IO window: disabled. > > MEM window: disabled. > > PREFETCH window: disabled. > > PCI: Bridge: 0000:00:1e.0 > > IO window: d000-dfff > > MEM window: fdb00000-fddfffff > > PREFETCH window: fde00000-fdefffff > > ACPI: PCI Interrupt 0000:00: 01.0[A] -> GSI 16 (level, low) -> IRQ 16 > > PCI: Setting latency timer of device 0000:00:01.0 to 64 > > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > > PCI: Setting latency timer of device 0000:00: 1c.0 to 64 > > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > > audit: initializing netlink socket (disabled) > > audit(1188261457.032:1): initialized > > VFS: Disk quotas dquot_6.5.1 > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > > JFS: nTxBlock = 2048, nTxLock = 16384 > > SGI XFS with ACLs, security attributes, realtime, large block numbers, > > no debug enabled > > SGI XFS Quota Management subsystem > > Initializing Cryptographic API > > io scheduler noop registered > > io scheduler deadline registered (default) > > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > > PCI: Setting latency timer of device 0000:00:01.0 to 64 > > assign_interrupt_mode Found MSI capability > > Allocate Port Service[0000:00:01.0:pcie00] > > Allocate Port Service[0000:00:01.0:pcie03] > > ACPI: PCI Interrupt 0000:00: 1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > > assign_interrupt_mode Found MSI capability > > Allocate Port Service[0000:00:1c.0:pcie00] > > Allocate Port Service[0000:00: 1c.0:pcie02] > > Allocate Port Service[0000:00:1c.0:pcie03] > > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > > serio: i8042 AUX port at 0x60,0x64 irq 12 > > serio: i8042 KBD port at 0x60,0x64 irq 1 > > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > > loop: loaded (max 8 devices) > > e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI > > e100: Copyright(c) 1999-2005 Intel Corporation > > ACPI: PCI Interrupt 0000:03: 04.0[A] -> GSI 16 (level, low) -> IRQ 16 > > e100: eth0: e100_probe: addr 0xfdeff000, irq 16, MAC addr > > 00:60:B0:1A:46:42 > > tun: Universal TUN/TAP device driver, 1.6 > > tun: (C) 1999-2004 Max Krasnyansky < maxk@qualcomm.com> > > Xen virtual console successfully installed as ttyS0 > > Event-channel device installed. > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > ide: Assuming 33MHz system bus speed for PIO modes; override with > > idebus=xx > > Probing IDE interface ide0... > > Probing IDE interface ide1... > > libata version 1.20 loaded. > > ahci 0000:00:1f.2: version 1.2 > > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 > > PCI: Setting latency timer of device 0000:00: 1f.2 to 64 > > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA > > mode > > ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part > > ata1: SATA max UDMA/133 cmd 0xD100E100 ctl 0x0 bmdma 0x0 irq 17 > > ata2: SATA max UDMA/133 cmd 0xD100E180 ctl 0x0 bmdma 0x0 irq 17 > > ata3: SATA max UDMA/133 cmd 0xD100E200 ctl 0x0 bmdma 0x0 irq 17 > > ata4: SATA max UDMA/133 cmd 0xD100E280 ctl 0x0 bmdma 0x0 irq 17 > > ata5: SATA max UDMA/133 cmd 0xD100E300 ctl 0x0 bmdma 0x0 irq 17 > > ata6: SATA max UDMA/133 cmd 0xD100E380 ctl 0x0 bmdma 0x0 irq 17 > > ata1: SATA link up 3.0 Gbps (SStatus 123) > > ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4123 85:7469 86:bc01 87:4123 > > 88:40ff > > ata1: dev 0 ATA-8, max UDMA7, 976773168 sectors: LBA48 > > ata1: dev 0 configured for UDMA/133 > > scsi0 : ahci > > ata2: SATA link up 3.0 Gbps (SStatus 123) > > ata2: dev 0 cfg 49:2f00 82:7469 83:7f61 84:4163 85:7469 86:3c41 87:4163 > > 88:407f > > ata2: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48 > > ata2: dev 0 configured for UDMA/133 > > scsi1 : ahci > > ata3: SATA link up 1.5 Gbps (SStatus 113) > > ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 > > 88:0007 > > ata3: dev 0 ATAPI, max UDMA/33 > > ata3: dev 0 configured for UDMA/33 > > scsi2 : ahci > > ata4: SATA link down (SStatus 0) > > scsi3 : ahci > > ata5: SATA link up 1.5 Gbps (SStatus 113) > > ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e21 87:4663 > > 88:007f > > ata5: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48 > > ata5: dev 0 configured for UDMA/133 > > scsi4 : ahci > > ata6: SATA link down (SStatus 0) > > scsi5 : ahci > > Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10 > > Type: Direct-Access ANSI SCSI revision: 05 > > Vendor: ATA Model: WDC WD5000YS-01M Rev: 07.0 > > Type: Direct-Access ANSI SCSI revision: 05 > > Vendor: HL-DT-ST Model: DVDRRW GSA-H30L Rev: S544 > > Type: CD-ROM ANSI SCSI revision: 05 > > Vendor: ATA Model: Maxtor 6L300S0 Rev: BACE > > Type: Direct-Access ANSI SCSI revision: 05 > > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > > sda: Write Protect is off > > sda: Mode Sense: 00 3a 00 00 > > SCSI device sda: drive cache: write back > > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > > sda: Write Protect is off > > sda: Mode Sense: 00 3a 00 00 > > SCSI device sda: drive cache: write back > > sda: sda1 sda2 > > sd 0:0:0:0: Attached scsi disk sda > > SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) > > sdb: Write Protect is off > > sdb: Mode Sense: 00 3a 00 00 > > SCSI device sdb: drive cache: write back > > SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) > > sdb: Write Protect is off > > sdb: Mode Sense: 00 3a 00 00 > > SCSI device sdb: drive cache: write back > > sdb: sdb1 sdb2 > > sd 1:0:0:0: Attached scsi disk sdb > > SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB) > > sdc: Write Protect is off > > sdc: Mode Sense: 00 3a 00 00 > > SCSI device sdc: drive cache: write back > > SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB) > > sdc: Write Protect is off > > sdc: Mode Sense: 00 3a 00 00 > > SCSI device sdc: drive cache: write back > > sdc: sdc1 sdc2 sdc3 sdc4 > > sd 4:0:0:0: Attached scsi disk sdc > > ata3: translated ATA stat/err 0x51/60 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray > > Uniform CD-ROM driver Revision: 3.20 > > sr 2:0:0:0: Attached scsi CD-ROM sr0 > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > sd 1:0:0:0: Attached scsi generic sg1 type 0 > > sr 2:0:0:0: Attached scsi generic sg2 type 5 > > sd 4:0:0:0: Attached scsi generic sg3 type 0 > > ieee1394: Initialized config rom entry `ip1394'' > > ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 20 (level, low) -> IRQ 18 > > ohci1394: fw-host0: Unexpected PCI resource length of 1000! > > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] > > MMIO=[fddff000-fddff7ff] Max Packet=[1024] IR/IT contexts=[8/8] > > ACPI: PCI Interrupt 0000:00:1a.7[A] -> GSI 23 (level, low) -> IRQ 19 > > PCI: Setting latency timer of device 0000:00: 1a.7 to 64 > > ehci_hcd 0000:00:1a.7: EHCI Host Controller > > PCI: cache line size of 32 is not supported by device 0000:00:1a.7 > > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > > ehci_hcd 0000:00: 1a.7 : irq 19, io mem 0xfdffe000 > > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > > usb usb1: configuration #1 chosen from 1 choice > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 4 ports detected > > ACPI: PCI Interrupt 0000:00: 1d.7[A] -> GSI 23 (level, low) -> IRQ 19 > > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > > ehci_hcd 0000:00:1d.7: EHCI Host Controller > > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > > ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffd000 > > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > > usb usb2: configuration #1 chosen from 1 choice > > hub 2-0:1.0: USB hub found > > hub 2-0:1.0: 6 ports detected > > ohci_hcd: 2005 April 22 USB 1.1 ''Open'' Host Controller (OHCI) Driver > > (PCI) > > USB Universal Host Controller Interface driver v2.3 > > ACPI: PCI Interrupt 0000:00: 1a.0[A] -> GSI 23 (level, low) -> IRQ 19 > > PCI: Setting latency timer of device 0000:00:1a.0 to 64 > > uhci_hcd 0000:00:1a.0: UHCI Host Controller > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > > uhci_hcd 0000:00:1a.0: irq 19, io base 0x0000fe00 > > usb usb3: configuration #1 chosen from 1 choice > > hub 3-0:1.0: USB hub found > > hub 3-0:1.0: 2 ports detected > > ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 19 (level, low) -> IRQ 17 > > PCI: Setting latency timer of device 0000:00:1a.1 to 64 > > uhci_hcd 0000:00:1a.1: UHCI Host Controller > > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > > uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fd00 > > usb usb4: configuration #1 chosen from 1 choice > > hub 4-0:1.0: USB hub found > > hub 4-0:1.0: 2 ports detected > > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 > > PCI: Setting latency timer of device 0000:00: 1d.0 to 64 > > uhci_hcd 0000:00:1d.0: UHCI Host Controller > > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 > > uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fc00 > > usb usb5: configuration #1 chosen from 1 choice > > hub 5-0:1.0: USB hub found > > hub 5-0:1.0: 2 ports detected > > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 > > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > > uhci_hcd 0000:00: 1d.1: UHCI Host Controller > > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 > > uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fb00 > > usb usb6: configuration #1 chosen from 1 choice > > hub 6-0:1.0: USB hub found > > hub 6-0:1.0: 2 ports detected > > usb 2-2: new high speed USB device using ehci_hcd and address 2 > > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 > > PCI: Setting latency timer of device 0000:00: 1d.2 to 64 > > uhci_hcd 0000:00:1d.2: UHCI Host Controller > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 > > uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fa00 > > usb usb7: configuration #1 chosen from 1 choice > > hub 7-0:1.0: USB hub found > > hub 7-0:1.0: 2 ports detected > > usb 2-2: configuration #1 chosen from 1 choice > > hub 2-2:1.0: USB hub found > > hub 2-2:1.0: 4 ports detected > > Initializing USB Mass Storage driver... > > usb 4-1: new full speed USB device using uhci_hcd and address 2 > > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c34717] > > usb 4-1: configuration #1 chosen from 1 choice > > usb 7-1: new full speed USB device using uhci_hcd and address 2 > > usb 7-1: configuration #1 chosen from 1 choice > > hub 7-1:1.0: USB hub found > > hub 7-1:1.0: 4 ports detected > > usb 2-2.1: new low speed USB device using ehci_hcd and address 4 > > usb 2-2.1: configuration #1 chosen from 1 choice > > scsi6 : SCSI emulation for USB Mass Storage devices > > usb-storage: device found at 2 > > usb-storage: waiting for device to settle before scanning > > usb 7-1.1: new low speed USB device using uhci_hcd and address 3 > > usb 7-1.1: configuration #1 chosen from 1 choice > > usbcore: registered new driver usb-storage > > USB Mass Storage support registered. > > usbcore: registered new driver hiddev > > hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS XS > > 1500 LCD FW: 837.H4 .D USB FW:H4 ] on usb-0000:00:1d.7-2.1 > > input: ATEN ATEN-COMPOSITE as /class/input/input0 > > input: USB HID v1.10 Keyboard [ATEN ATEN-COMPOSITE] on usb-0000:00: > > 1d.2-1.1 > > input: ATEN ATEN-COMPOSITE as /class/input/input1 > > input: USB HID v1.10 Mouse [ATEN ATEN-COMPOSITE] on usb-0000:00:1d.2-1.1 > > usbcore: registered new driver usbhid > > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > > mice: PS/2 mouse device common for all mice > > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > > md: bitmap version 4.39 > > device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com > > NET: Registered protocol family 2 > > input: AT Translated Set 2 keyboard as /class/input/input2 > > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > > TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > > TCP: Hash tables configured (established 16384 bind 16384) > > TCP reno registered > > IPv4 over IPv4 tunneling driver > > TCP bic registered > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > Using IPI Shortcut mode > > md: Autodetecting RAID arrays. > > md: autorun ... > > md: ... autorun DONE. > > RAMDISK: ext2 filesystem found at block 0 > > RAMDISK: Loading 4980KiB [1 disk] into ram disk... done. > > EXT2-fs warning: checktime reached, running e2fsck is recommended > > VFS: Mounted root (ext2 filesystem). > > Freeing unused kernel memory: 200k freed > > logips2pp: Detected unknown logitech mouse model 0 > > kjournald starting. Commit interval 5 seconds > > EXT3-fs: mounted filesystem with ordered data mode. > > input: PS/2 Logitech Mouse as /class/input/input3 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > ata3: no sense translation for error 0x20 > > ata3: no sense translation for status: 0x51 > > ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04 > > eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > > Vendor: Generic Model: USB SD Reader Rev: 1.00 > > Type: Direct-Access ANSI SCSI revision: 00 > > sd 6:0:0:0: Attached scsi removable disk sdd > > sd 6:0:0:0: Attached scsi generic sg4 type 0 > > Vendor: Generic Model: USB CF Reader Rev: 1.01 > > Type: Direct-Access ANSI SCSI revision: 00 > > sd 6:0:0:1: Attached scsi removable disk sde > > sd 6:0:0:1: Attached scsi generic sg5 type 0 > > Vendor: Generic Model: USB SM Reader Rev: 1.02 > > Type: Direct-Access ANSI SCSI revision: 00 > > sd 6:0:0:2: Attached scsi removable disk sdf > > sd 6:0:0:2: Attached scsi generic sg6 type 0 > > Vendor: Generic Model: USB MS Reader Rev: 1.03 > > Type: Direct-Access ANSI SCSI revision: 00 > > sd 6:0:0:3: Attached scsi removable disk sdg > > sd 6:0:0:3: Attached scsi generic sg7 type 0 > > usb-storage: device scan complete > > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 > > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > hw_random hardware driver 1.0.0 loaded > > hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... > > EXT3 FS on dm-9, internal journal > > kjournald starting. Commit interval 5 seconds > > EXT3 FS on dm-0, internal journal > > EXT3-fs: mounted filesystem with ordered data mode. > > Adding 2097144k swap on /dev/mapper/main-swap. Priority:-1 extents:1 > > across:2097144k > > Real Time Clock Driver v1.12ac > > e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex > > device vif0.0 entered promiscuous mode > > xenbr0: port 1(vif0.0) entering learning state > > xenbr0: topology change detected, propagating > > xenbr0: port 1(vif0.0) entering forwarding state > > e100: peth0: e100_watchdog: link up, 100Mbps, full-duplex > > device peth0 entered promiscuous mode > > xenbr0: port 2(peth0) entering learning state > > xenbr0: topology change detected, propagating > > xenbr0: port 2(peth0) entering forwarding state > > device tap0 entered promiscuous mode > > device vif1.0 entered promiscuous mode > > xenbr0: port 3(tap0) entering learning state > > xenbr0: topology change detected, propagating > > xenbr0: port 3(tap0) entering forwarding state > > xenbr0: port 4(vif1.0) entering disabled state > > device vif1.0 left promiscuous mode > > xenbr0: port 4(vif1.0) entering disabled state > > xenbr0: port 3(tap0) entering disabled state > > device tap0 left promiscuous mode > > xenbr0: port 3(tap0) entering disabled state > > > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users