Hallo, I cannot get my xen networking going ... My Debian/Etch-Xen (2.6.18-3-xen-686)-machine has two nics. I wolud like to create a scenario with a public site (eth0), a private LAN (eth1) and a DMZ. This should not be too exotic as I found something like this in several postings. In Dom0 I put the bridges in my /etc/network/interfaces (I''ve no knowlegde of perl, so fiddling with a custom xen-network-script is no option for me and from what I googled, this should be a valid way to configure the bridges.): auto eth0 iface eth0 inet static address 192.168.1.100 network 192.168.1.0 netmask 255.255.255.0 gateway 192.168.1.1 #LAN auto eth1 iface eth1 inet static address 192.168.2.100 network 192.168.2.0 netmask 255.255.255.0 auto dummy0 iface dummy0 inet static address 192.168.3.100 netmask 255.255.255.0 gateway 192.168.3.1 # Internal Bridged Network. auto xenintbr iface xenintbr inet static pre-up brctl addbr xenintbr post-down brctl delbr xenintbr address 192.168.2.1 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 bridge_fd 0 bridge_hello 0 bridge_stp off auto xendmzbr iface xendmzbr inet static pre-up brctl addbr xendmzbr post-down brctl delbr xendmzbr address 192.168.3.1 netmask 255.255.255.0 network 192.168.3.0 broadcast 192.168.3.255 bridge_fd 0 bridge_hello 0 bridge_stp off A ifconfig shows, that both brigdes are up; I can ping all given addresses (in Dom0). In the DomU-config file I specify the brigde vif = [''bridge=xenintbr''] I tried to apply the IP-Address from the config-File or within the running DomU - neither way worked. What is wrong, what am I missing? Any help is appreciated. Thanks! Michael _______________________________________________________________ SMS schreiben mit WEB.DE FreeMail - einfach, schnell und kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192 _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users