Hi all,
i''m new to Xen and i tried to install it in gentoo some days ago. It
worked fine, but for some reason i had to reinstall al the systtem. Now
i have the same problem i had the first time i installed it and i
forgot the reason of the problem so i''m uable to solve it. When i boot
gentoo the network don''t start.
Seems that no one take a ip so the network cannot bring up.
server04 ~ # ifconfig
eth0 Link encap:Ethernet HWaddr 00:10:5A:B4:31:AA
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:315 errors:0 dropped:0 overruns:0 frame:0
TX packets:131 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:27595 (26.9 Kb) TX bytes:15298 (14.9 Kb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:315 errors:0 dropped:0 overruns:0 frame:0
TX packets:131 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28087 (27.4 Kb) TX bytes:15394 (15.0 Kb)
Interrupt:17 Base address:0xe000
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:131 errors:0 dropped:0 overruns:0 frame:0
TX packets:315 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15298 (14.9 Kb) TX bytes:27595 (26.9 Kb)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:129 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9452 (9.2 Kb) TX bytes:0 (0.0 b)
server04 ~ # netstat -ran
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window
irtt Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0
0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0
0 lo
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no vif0.0
peth0
I really don''t remember what i have to do to start netowork. I
modified my /etc/conf.d/net like this:
bridge_xenbr0="eth0"
config_eth0=( "null" )
config_xenbr0=( "192.168.1.204" )
brctl_xenbr0=( "setfd 0" "sethello 0" "stp off" )
routes_xenbr0=( "default via 192.168.1.254" )
I want that 192.168.1.204 is the ip address and 192.168.1.254 the
gateway.
Thx for any answer. Bye
Naviga e telefona senza limiti con Tiscali
Scopri le promozioni Tiscali adsl: navighi e telefoni senza canone Telecom
http://abbonati.tiscali.it/adsl/
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users