Hi, I''ve got a machine I''d like to run Xen on, and I''m currently not having any luck. The machine is a based on a VIA EPIA PD6000 motherboard, with a VIA Samuel 2 CPU. I''m using a binary of the hypervisor from backports.org, and a Dom0 kernel build from source with the appropriate config. When I boot the machine, it just resets itself. The grub boot stanza is:- title Debian GNU/Linux, kernel 2.6.16-xen root (hd0,0) kernel /xen-3.0-i386.gz module /vmlinuz-2.6.16-xen root=/dev/mapper/vg0-root ro savedefault boot and all I get on boot is this:- ============================================================================= Booting ''Debian GNU/Linux, kernel 2.6.16-xen '' root (hd0,0) Filesystem type is xfs, partition type 0x83 kernel /xen-3.0-i386.gz [Multiboot-elf, <0x100000:0x72274:0x33d8c>, shtab=0x1a6078, entry=0x100000] module /vmlinuz-2.6.16-xen root=/dev/mapper/vg0-root ro ============================================================================= The message above flashes up only briefly, then the machine resets (I had to photograph the screen to actually see the whole thing). It works fine with the same kernel config and no Xen. I see from previous posts that the VIA Samuel 2 supports only 4Kb pages, and this caused problems, but there was definitely a patch for Xen 2 for this issue:- http://lists.xensource.com/archives/html/xen-devel/2004-12/msg00083.html I can find nothing recent about this, which suggested to me that the patch had been incorporated, but maybe I''m wrong. Can anyone give a definitive answer as to whether Xen 3.0 supports my hardware, and if not, if there are any patches still around? If it does, is there something I''m doing wrong in the setup that''s causing the problem? TIA Mike _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users