master@bradleyland.com
2006-Aug-14 04:48 UTC
[Xen-users] Current FC5 kernel-xen rpm broken?
I''ve just migrated a system from FC4/Xen 3.0 (old) to FC5 with xen 3.0.2. The OS update went without issue. Unfortunately, neither the kernel-xen or kernel-xen0 packages work for me; they fail in two different ways: 1. kernel-xen appears to be built as PAE (not that it matters I suppose), and does not bring up any vethx/vif interfaces. When attempting to run the "network-bridge" script manually, it errors out saying "veth0 doesn''t exist", etc. I haven''t figured out the magic required for this to work. 2. kernel-xen0 does start up the virtual interfaces successfully. Unfortunately, the dom0 machine crashes with a stack dump when using most any networking. I can make it fail just be connecting to the samba server on the box and clicking on few directories. Otherwise, if I ssh into the machine it takes a bit longer, but still crashes. If I work from the console, it stays up indefinitely (10 hours or more). I''d appreciate some guidance on using xen with FC5. I had hoped the released packages would be stable and usable. The machine (when running FC4) was as stable as a rock (up for 205 days) before I started the migration process, so I don''t think I have a hardware problem. The only change I made on the box was to enable "PnP OS?" and turn on ACPI. These settings had been disabled when it was running FC4. Is my best bet to compile from source and forget about the rpms? The FC5 kernel is 2.6.17. I need to grow a raid 5 device and it''s my understanding I need .17 in order for this to be supported. The machine only has 1Gb of ram so I don''t need PAE in any case. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
master@bradleyland.com
2006-Aug-14 14:28 UTC
[Xen-users] Current FC5 kernel-xen rpm broken?
I''ve just migrated a system from FC4/Xen 3.0 (old) to FC5 with xen 3.0.2. The OS update went without issue. Unfortunately, neither the kernel-xen or kernel-xen0 packages work for me; they fail in two different ways: 1. kernel-xen appears to be built as PAE (not that it matters I suppose), and does not bring up any vethx/vif interfaces. When attempting to run the "network-bridge" script manually, it errors out saying "veth0 doesn''t exist", etc. I haven''t figured out the magic required for this to work. 2. kernel-xen0 does start up the virtual interfaces successfully. Unfortunately, the dom0 machine crashes with a stack dump when using most any networking. I can make it fail just be connecting to the samba server on the box and clicking on few directories. Otherwise, if I ssh into the machine it takes a bit longer, but still crashes. If I work from the console, it stays up indefinitely (10 hours or more). I''d appreciate some guidance on using xen with FC5. I had hoped the released packages would be stable and usable. The machine (when running FC4) was as stable as a rock (up for 205 days) before I started the migration process, so I don''t think I have a hardware problem. The only change I made on the box was to enable "PnP OS?" and turn on ACPI. These settings had been disabled when it was running FC4. Is my best bet to compile from source and forget about the rpms? The FC5 kernel is 2.6.17. I need to grow a raid 5 device and it''s my understanding I need .17 in order for this to be supported. The machine only has 1Gb of ram so I don''t need PAE in any case. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users