Xen users - Aug 2006 - Boot Problems and Network problem on Debian with Xen 3.0.2

Hi,

i have install the binary Xen 3.0.2.

On the boot for a domain, i have this errors :

-------
...
8250: no version for "struct_module" found: kernel tainted.
8250: Unknown symbol uart_get_baud_rate
8250: Unknown symbol uart_resume_port
8250: Unknown symbol uart_register_driver
8250: Unknown symbol uart_suspend_port
8250: Unknown symbol uart_remove_one_port
8250: Unknown symbol uart_update_timeout
8250: Unknown symbol uart_unregister_driver
8250: Unknown symbol uart_get_divisor
8250: Unknown symbol uart_match_port
8250: Unknown symbol uart_add_one_port
8250: Unknown symbol uart_write_wakeup
modprobe: FATAL: Error inserting 8250 (/lib/modules/2.6.16-xen/kernel/ 
drivers/serial/8250.ko): Unknown symbol in module, or unknown  
parameter (see dmesg)
...
select() to /dev/rtc to wait for clock tick timed out
...
Configuring network interfaces...SIOCSIFNETMASK: Invalid argument
Failed to bring up eth0.
...
-------

And, i don''h have access to internet.
So, i look ifconfig : OK, route : NOT OK,

-------
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref     
Use Iface
1#.#.#.0   *               255.255.255.0   U     0      0        0 eth0
-------

But, when i add a default route, it''s OK. I have change the init.d  
for network, but, i must wait 10 min for net. But, after it''s OK.

The OS is Debian.

Have you any idea for there problems ?

Sharlaan

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users