Hi all,
I''m having some problems configuring a DomU bridging firewall with Xen,
and I was hoping someone here could help. Hopefully I''m just doing
something foolish here that can be easily fixed :). Here''s my setup:
In my firewall domain I have to interfaces, one attached to xenbr0
(which peth0 is a member), and the other attached to dumbr0 (which
dummy0 is a member). My other DomU, which is suppose to connect via my
firewall, has one interface, attached to dumbr0. I''m not sure if I
actually need the dummy0 interface, but it seemed like the right thing
to do ;-).
$ brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no vif0.0
peth0
vif1.0
dumbr0 8000.12615a37fb1a no dummy0
vif1.1
vif2.0
firewall config:
vif = [ ''bridge=xenbr0'',
''bridge=dumbr0'' ]
otherdomU config:
vif = [ ''bridge=dumbr0'' ]
In otherdomU I can ping the firewall, I can ping the gateway, and I can
ping hosts outside of the gateway, including the nameserver. However,
otherdomU can''t resolve any domain names (yes, resolv.conf is set
properly). I can ssh to my firewall from otherdomU, but I can''t ssh to
other servers in the same network even when I specify the ip address.
Any ideas?
Thanks for any help!
Scott
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Sorry if this is a duplicate... I''ve been having some problems with my
mail client and wasn''t sure if this went through the first time.
---
Hi all,
I''m having some problems configuring a DomU bridging firewall with Xen,
and I was hoping someone here could help. Hopefully I''m just doing
something foolish here that can be easily fixed :). Here''s my setup:
In my firewall domain I have to interfaces, one attached to xenbr0
(which peth0 is a member), and the other attached to dumbr0 (which
dummy0 is a member). My other DomU, which is suppose to connect via my
firewall, has one interface, attached to dumbr0. I''m not sure if I
actually need the dummy0 interface, but it seemed like the right thing
to do ;-).
$ brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no vif0.0
peth0
vif1.0
dumbr0 8000.12615a37fb1a no dummy0
vif1.1
vif2.0
firewall config:
vif = [ ''bridge=xenbr0'',
''bridge=dumbr0'' ]
otherdomU config:
vif = [ ''bridge=dumbr0'' ]
In otherdomU I can ping the firewall, I can ping the gateway, and I can
ping hosts outside of the gateway, including the nameserver. However,
otherdomU can''t resolve any domain names (yes, resolv.conf is set
properly). I can ssh to my firewall from otherdomU, but I can''t ssh to
other servers in the same network even when I specify the ip address.
Any ideas?
Thanks for any help!
Scott
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users