I successfully installed xen3.0 on my machines. However there are a few problems when I try to create a new domain! The procedure I''ve followed is pretty much the same as given on pages 4-5 on; http://www.howtoforge.com/perfect_setup_xen3_debian_p4 On doing a '' xm create -c /etc/xen/vm1-config.sxp vmid=1'' the following is what parts of the trace look like: NET: Registered protocol family 20 Using IPI No-Shortcut mode EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 168k freed 8250: no version for "struct_module" found: kernel tainted. 8250: Unknown symbol uart_get_baud_rate 8250: Unknown symbol uart_resume_port 8250: Unknown symbol uart_register_driver 8250: Unknown symbol uart_suspend_port 8250: Unknown symbol uart_remove_one_port 8250: Unknown symbol uart_update_timeout 8250: Unknown symbol uart_unregister_driver 8250: Unknown symbol uart_get_divisor 8250: Unknown symbol uart_match_port 8250: Unknown symbol uart_add_one_port 8250: Unknown symbol uart_write_wakeup modprobe: FATAL: Error inserting 8250 (/lib/modules/2.6.16-xen/kernel/drivers/serial/8250.ko): Unknown symbol in module, or unknown parameter (see dmesg) INIT: version 2.86 booting * Files under mount point ''/dev/shm'' will be hidden. Will now activate swap. swapon on /dev/hda2 swapon: cannot stat /dev/hda2: No such file or directory * Swap activation failed with error code 255. Will now check root file system. fsck 1.39-WIP (31-Dec-2005) [/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a -C0 /dev/shm/root /dev/shm/root: clean, 25155/640000 files, 193537/1280000 blocks Will now mount local filesystems. mount: mount point devpts does not exist none on /dev/shm type tmpfs (rw) * Mounting local filesystems failed with error code 96. Will now activate swapfile swap. Done activating swapfile swap. * /etc/network/options is deprecated. Setting up IP spoofing protection...done (rp_filter). Configuring network interfaces...done. Starting portmap daemon.... Starting deferred execution scheduler: atd. Starting periodic command scheduler.... INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel my /etc/fstab for this machine looks like: proc /proc proc defaults 0 0 /dev/hda1 / ext3 defaults,errors=remount-ro 0 1 /dev/hda5 none swap sw 0 0 and the domain configuration file is attahed. Any sort of help would be appreciated! I''ve been stuck here since pretty long :( Regards, Hardeep -- hardeep _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Hardeep Singh
2006-May-29 23:38 UTC
[Xen-users] Re: new domain respawns with xen3.0 on ubuntu
ooppss..!! posted the wrong fstab! The one for this domain is: /dev/hda1 / ext3 defaults 1 2 /dev/hda2 none swap sw 0 0 /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 The one the previous post is the dom0 one! Regards, Hardeep On 5/29/06, Hardeep Singh <hardeepguru@gmail.com> wrote:> > I successfully installed xen3.0 on my machines. However there are a few > problems when I try to create a new domain! > > The procedure I''ve followed is pretty much the same as given on pages 4-5 > on; > > http://www.howtoforge.com/perfect_setup_xen3_debian_p4 > > On doing a '' xm create -c /etc/xen/vm1-config.sxp vmid=1'' the following is > what parts of the trace look like: > > NET: Registered protocol family 20 > Using IPI No-Shortcut mode > EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem > as ext2 > VFS: Mounted root (ext2 filesystem) readonly. > Freeing unused kernel memory: 168k freed > 8250: no version for "struct_module" found: kernel tainted. > 8250: Unknown symbol uart_get_baud_rate > 8250: Unknown symbol uart_resume_port > 8250: Unknown symbol uart_register_driver > 8250: Unknown symbol uart_suspend_port > 8250: Unknown symbol uart_remove_one_port > 8250: Unknown symbol uart_update_timeout > 8250: Unknown symbol uart_unregister_driver > 8250: Unknown symbol uart_get_divisor > 8250: Unknown symbol uart_match_port > 8250: Unknown symbol uart_add_one_port > 8250: Unknown symbol uart_write_wakeup > modprobe: FATAL: Error inserting 8250 > (/lib/modules/2.6.16-xen/kernel/drivers/serial/8250.ko): Unknown symbol in > module, or unknown parameter (see dmesg) > > INIT: version 2.86 booting > * Files under mount point ''/dev/shm'' will be hidden. > Will now activate swap. > swapon on /dev/hda2 > swapon: cannot stat /dev/hda2: No such file or directory > * Swap activation failed with error code 255. > Will now check root file system. > fsck 1.39-WIP (31-Dec-2005) > [/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a -C0 /dev/shm/root > /dev/shm/root: clean, 25155/640000 files, 193537/1280000 blocks > > Will now mount local filesystems. > mount: mount point devpts does not exist > none on /dev/shm type tmpfs (rw) > * Mounting local filesystems failed with error code 96. > Will now activate swapfile swap. > Done activating swapfile swap. > > * /etc/network/options is deprecated. > Setting up IP spoofing protection...done (rp_filter). > Configuring network interfaces...done. > Starting portmap daemon.... > > Starting deferred execution scheduler: atd. > Starting periodic command scheduler.... > INIT: Id "1" respawning too fast: disabled for 5 minutes > INIT: Id "2" respawning too fast: disabled for 5 minutes > INIT: Id "5" respawning too fast: disabled for 5 minutes > INIT: Id "3" respawning too fast: disabled for 5 minutes > INIT: Id "4" respawning too fast: disabled for 5 minutes > INIT: Id "6" respawning too fast: disabled for 5 minutes > INIT: no more processes left in this runlevel > INIT: Id "1" respawning too fast: disabled for 5 minutes > INIT: Id "2" respawning too fast: disabled for 5 minutes > INIT: Id "5" respawning too fast: disabled for 5 minutes > INIT: Id "3" respawning too fast: disabled for 5 minutes > INIT: Id "4" respawning too fast: disabled for 5 minutes > INIT: Id "6" respawning too fast: disabled for 5 minutes > INIT: no more processes left in this runlevel > > > > my /etc/fstab for this machine looks like: > proc /proc proc defaults 0 0 > /dev/hda1 / ext3 defaults,errors=remount-ro 0 > 1 > /dev/hda5 none swap sw 0 0 > > and the domain configuration file is attahed. > > Any sort of help would be appreciated! I''ve been stuck here since pretty > long :( > > Regards, > Hardeep > > > > > -- > hardeep > >-- hardeep _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tijl Van den Broeck
2006-May-30 13:50 UTC
[Xen-users] Re: new domain respawns with xen3.0 on ubuntu
You need to fix your inittab before booting the xen domU. /mnt/domu/etc/inittab: 1:2345:respawn:/sbin/getty 38400 console and comment the other 1-6 out. Now you''ve got yourself a console and booting should work. greetings On 5/30/06, Hardeep Singh <hardeepguru@gmail.com> wrote:> ooppss..!! posted the wrong fstab!The one for this domain is: /dev/hda1 / ext3 defaults 1 2 /dev/hda2 none swap sw 0 0 /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 The one the previous post is the dom0 one! Regards, Hardeep On 5/29/06, Hardeep Singh < hardeepguru@gmail.com> wrote:> > I successfully installed xen3.0 on my machines. However there are a few > problems when I try to create a new domain! > > The procedure I''ve followed is pretty much the same as given on pages 4-5 > on; > > http://www.howtoforge.com/perfect_setup_xen3_debian_p4 > > On doing a '' xm create -c /etc/xen/vm1-config.sxp vmid=1'' the following is > what parts of the trace look like: > > NET: Registered protocol family 20 > Using IPI No-Shortcut mode > EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem > as ext2 > VFS: Mounted root (ext2 filesystem) readonly. > Freeing unused kernel memory: 168k freed > 8250: no version for "struct_module" found: kernel tainted. > 8250: Unknown symbol uart_get_baud_rate > 8250: Unknown symbol uart_resume_port > 8250: Unknown symbol uart_register_driver > 8250: Unknown symbol uart_suspend_port > 8250: Unknown symbol uart_remove_one_port > 8250: Unknown symbol uart_update_timeout > 8250: Unknown symbol uart_unregister_driver > 8250: Unknown symbol uart_get_divisor > 8250: Unknown symbol uart_match_port > 8250: Unknown symbol uart_add_one_port > 8250: Unknown symbol uart_write_wakeup > modprobe: FATAL: Error inserting 8250 > (/lib/modules/2.6.16-xen/kernel/drivers/serial/8250.ko): Unknown symbol in > module, or unknown parameter (see dmesg) > > INIT: version 2.86 booting > * Files under mount point ''/dev/shm'' will be hidden. > Will now activate swap. > swapon on /dev/hda2 > swapon: cannot stat /dev/hda2: No such file or directory > * Swap activation failed with error code 255. > Will now check root file system. > fsck 1.39-WIP (31-Dec-2005) > [/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a -C0 /dev/shm/root > /dev/shm/root: clean, 25155/640000 files, 193537/1280000 blocks > > Will now mount local filesystems. > mount: mount point devpts does not exist > none on /dev/shm type tmpfs (rw) > * Mounting local filesystems failed with error code 96. > Will now activate swapfile swap. > Done activating swapfile swap. > > * /etc/network/options is deprecated. > Setting up IP spoofing protection...done (rp_filter). > Configuring network interfaces...done. > Starting portmap daemon.... > > Starting deferred execution scheduler: atd. > Starting periodic command scheduler.... > INIT: Id "1" respawning too fast: disabled for 5 minutes > INIT: Id "2" respawning too fast: disabled for 5 minutes > INIT: Id "5" respawning too fast: disabled for 5 minutes > INIT: Id "3" respawning too fast: disabled for 5 minutes > INIT: Id "4" respawning too fast: disabled for 5 minutes > INIT: Id "6" respawning too fast: disabled for 5 minutes > INIT: no more processes left in this runlevel > INIT: Id "1" respawning too fast: disabled for 5 minutes > INIT: Id "2" respawning too fast: disabled for 5 minutes > INIT: Id "5" respawning too fast: disabled for 5 minutes > INIT: Id "3" respawning too fast: disabled for 5 minutes > INIT: Id "4" respawning too fast: disabled for 5 minutes > INIT: Id "6" respawning too fast: disabled for 5 minutes > INIT: no more processes left in this runlevel > > > > my /etc/fstab for this machine looks like: > proc /proc proc defaults 0 0 > /dev/hda1 / ext3 defaults,errors=remount-ro 0 > 1 > /dev/hda5 none swap sw 0 0 > > and the domain configuration file is attahed. > > Any sort of help would be appreciated! I''ve been stuck here since pretty > long :( > > Regards, > Hardeep > > > > > -- > hardeep > >-- hardeep _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Hardeep Singh
2006-May-30 16:30 UTC
Re: [Xen-users] Re: new domain respawns with xen3.0 on ubuntu
Ya that worked :) Thanks! But however the domU shows a blocked state on doing a ''xm list'' Name ID Mem(MiB) VCPUs State Time(s) Domain- 0 256 2 r----- 71.0 vm1 7 128 2 -b---- 16.6 Hardeep On 5/30/06, Tijl Van den Broeck < subspawn@gmail.com> wrote:> > You need to fix your inittab before booting the xen domU. > > /mnt/domu/etc/inittab: > 1:2345:respawn:/sbin/getty 38400 console > > and comment the other 1-6 out. Now you''ve got yourself a console and > booting should work. > > greetings > > > > > On 5/30/06, Hardeep Singh < hardeepguru@gmail.com> wrote: > > > ooppss..!! posted the wrong fstab! > > The one for this domain is: > > /dev/hda1 / ext3 defaults 1 2 > /dev/hda2 none swap sw 0 0 > /dev/pts devpts gid=5,mode=620 0 0 > none /dev/shm tmpfs defaults 0 0 > > The one the previous post is the dom0 one! > > Regards, > Hardeep > > > On 5/29/06, Hardeep Singh < hardeepguru@gmail.com> wrote: > > > > I successfully installed xen3.0 on my machines. However there are a few > > problems when I try to create a new domain! > > > > The procedure I''ve followed is pretty much the same as given on pages > > 4-5 on; > > > > http://www.howtoforge.com/perfect_setup_xen3_debian_p4 > > > > On doing a '' xm create -c /etc/xen/vm1-config.sxp vmid=1'' the following > > is what parts of the trace look like: > > > > NET: Registered protocol family 20 > > Using IPI No-Shortcut mode > > EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem > > as ext2 > > VFS: Mounted root (ext2 filesystem) readonly. > > Freeing unused kernel memory: 168k freed > > 8250: no version for "struct_module" found: kernel tainted. > > 8250: Unknown symbol uart_get_baud_rate > > 8250: Unknown symbol uart_resume_port > > 8250: Unknown symbol uart_register_driver > > 8250: Unknown symbol uart_suspend_port > > 8250: Unknown symbol uart_remove_one_port > > 8250: Unknown symbol uart_update_timeout > > 8250: Unknown symbol uart_unregister_driver > > 8250: Unknown symbol uart_get_divisor > > 8250: Unknown symbol uart_match_port > > 8250: Unknown symbol uart_add_one_port > > 8250: Unknown symbol uart_write_wakeup > > modprobe: FATAL: Error inserting 8250 > > (/lib/modules/2.6.16-xen/kernel/drivers/serial/8250.ko): Unknown symbol in > > module, or unknown parameter (see dmesg) > > > > INIT: version 2.86 booting > > * Files under mount point ''/dev/shm'' will be hidden. > > Will now activate swap. > > swapon on /dev/hda2 > > swapon: cannot stat /dev/hda2: No such file or directory > > * Swap activation failed with error code 255. > > Will now check root file system. > > fsck 1.39-WIP (31-Dec-2005) > > [/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a -C0 /dev/shm/root > > /dev/shm/root: clean, 25155/640000 files, 193537/1280000 blocks > > > > Will now mount local filesystems. > > mount: mount point devpts does not exist > > none on /dev/shm type tmpfs (rw) > > * Mounting local filesystems failed with error code 96. > > Will now activate swapfile swap. > > Done activating swapfile swap. > > > > * /etc/network/options is deprecated. > > Setting up IP spoofing protection...done (rp_filter). > > Configuring network interfaces...done. > > Starting portmap daemon.... > > > > Starting deferred execution scheduler: atd. > > Starting periodic command scheduler.... > > INIT: Id "1" respawning too fast: disabled for 5 minutes > > INIT: Id "2" respawning too fast: disabled for 5 minutes > > INIT: Id "5" respawning too fast: disabled for 5 minutes > > INIT: Id "3" respawning too fast: disabled for 5 minutes > > INIT: Id "4" respawning too fast: disabled for 5 minutes > > INIT: Id "6" respawning too fast: disabled for 5 minutes > > INIT: no more processes left in this runlevel > > INIT: Id "1" respawning too fast: disabled for 5 minutes > > INIT: Id "2" respawning too fast: disabled for 5 minutes > > INIT: Id "5" respawning too fast: disabled for 5 minutes > > INIT: Id "3" respawning too fast: disabled for 5 minutes > > INIT: Id "4" respawning too fast: disabled for 5 minutes > > INIT: Id "6" respawning too fast: disabled for 5 minutes > > INIT: no more processes left in this runlevel > > > > > > > > my /etc/fstab for this machine looks like: > > proc /proc proc defaults 0 0 > > /dev/hda1 / ext3 defaults,errors=remount-ro > > 0 1 > > /dev/hda5 none swap sw 0 0 > > > > and the domain configuration file is attahed. > > > > Any sort of help would be appreciated! I''ve been stuck here since pretty > > long :( > > > > Regards, > > Hardeep > > > > > > > > > > -- > > hardeep > > > > > > > -- > hardeep > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users > > >-- hardeep -- hardeep _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tijl Van den Broeck
2006-May-30 19:38 UTC
Re: [Xen-users] Re: new domain respawns with xen3.0 on ubuntu
As far as I''ve read it means something like "waiting for io", but it is actually running. As you can connect to it''s console and network should come up too. Search the archives, I think that question has already been answerd. greets On 5/30/06, Hardeep Singh <hardeepguru@gmail.com> wrote:> > Ya that worked :) Thanks! > > But however the domU shows a blocked state on doing a ''xm list'' > > Name ID Mem(MiB) VCPUs State Time(s) > Domain- 0 256 2 r----- 71.0 > vm1 7 128 2 -b---- 16.6 > > Hardeep > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Marco Crociani - Tyrael
2006-Jun-28 13:49 UTC
Re: [Xen-users] Re: new domain respawns with xen3.0 on ubuntu
Anoter solution is create the tty devices: # cd /lib/udev/devices # ./MAKEDEV tty2 tty3 tty4 tty5 tty6 # shutdown -r now What is the best solution? If there is only one tty device is possibile to connect 2,3 or more times at once with xm console? 2006/5/30, Tijl Van den Broeck <subspawn@gmail.com>:> You need to fix your inittab before booting the xen domU. > > /mnt/domu/etc/inittab: > 1:2345:respawn:/sbin/getty 38400 console > > and comment the other 1-6 out. Now you've got yourself a console and booting > should work. > > greetings > > > > > > > On 5/30/06, Hardeep Singh < hardeepguru@gmail.com> wrote: > > > > ooppss..!! posted the wrong fstab! > > The one for this domain is: > > /dev/hda1 / ext3 defaults 1 2 > /dev/hda2 none swap sw 0 0 > /dev/pts devpts gid=5,mode=620 0 0 > none /dev/shm tmpfs defaults 0 0 > > The one the previous post is the dom0 one! > > Regards, > Hardeep > > > On 5/29/06, Hardeep Singh < hardeepguru@gmail.com> wrote: > > > > I successfully installed xen3.0 on my machines. However there are a few > problems when I try to create a new domain! > > > > The procedure I've followed is pretty much the same as given on pages 4-5 > on; > > > > http://www.howtoforge.com/perfect_setup_xen3_debian_p4 > > > > On doing a ' xm create -c /etc/xen/vm1-config.sxp vmid=1' the following is > what parts of the trace look like: > > > > NET: Registered protocol family 20 > > Using IPI No-Shortcut mode > > EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem > as ext2 > > VFS: Mounted root (ext2 filesystem) readonly. > > Freeing unused kernel memory: 168k freed > > 8250: no version for "struct_module" found: kernel tainted. > > 8250: Unknown symbol uart_get_baud_rate > > 8250: Unknown symbol uart_resume_port > > 8250: Unknown symbol uart_register_driver > > 8250: Unknown symbol uart_suspend_port > > 8250: Unknown symbol uart_remove_one_port > > 8250: Unknown symbol uart_update_timeout > > 8250: Unknown symbol uart_unregister_driver > > 8250: Unknown symbol uart_get_divisor > > 8250: Unknown symbol uart_match_port > > 8250: Unknown symbol uart_add_one_port > > 8250: Unknown symbol uart_write_wakeup > > modprobe: FATAL: Error inserting 8250 > (/lib/modules/2.6.16-xen/kernel/drivers/serial/8250.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > > > > INIT: version 2.86 booting > > * Files under mount point '/dev/shm' will be hidden. > > Will now activate swap. > > swapon on /dev/hda2 > > swapon: cannot stat /dev/hda2: No such file or directory > > * Swap activation failed with error code 255. > > Will now check root file system. > > fsck 1.39-WIP (31-Dec-2005) > > [/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a -C0 /dev/shm/root > > /dev/shm/root: clean, 25155/640000 files, 193537/1280000 blocks > > > > Will now mount local filesystems. > > mount: mount point devpts does not exist > > none on /dev/shm type tmpfs (rw) > > * Mounting local filesystems failed with error code 96. > > Will now activate swapfile swap. > > Done activating swapfile swap. > > > > * /etc/network/options is deprecated. > > Setting up IP spoofing protection...done (rp_filter). > > Configuring network interfaces...done. > > Starting portmap daemon.... > > > > Starting deferred execution scheduler: atd. > > Starting periodic command scheduler.... > > INIT: Id "1" respawning too fast: disabled for 5 minutes > > INIT: Id "2" respawning too fast: disabled for 5 minutes > > INIT: Id "5" respawning too fast: disabled for 5 minutes > > INIT: Id "3" respawning too fast: disabled for 5 minutes > > INIT: Id "4" respawning too fast: disabled for 5 minutes > > INIT: Id "6" respawning too fast: disabled for 5 minutes > > INIT: no more processes left in this runlevel > > INIT: Id "1" respawning too fast: disabled for 5 minutes > > INIT: Id "2" respawning too fast: disabled for 5 minutes > > INIT: Id "5" respawning too fast: disabled for 5 minutes > > INIT: Id "3" respawning too fast: disabled for 5 minutes > > INIT: Id "4" respawning too fast: disabled for 5 minutes > > INIT: Id "6" respawning too fast: disabled for 5 minutes > > INIT: no more processes left in this runlevel > > > > > > > > my /etc/fstab for this machine looks like: > > proc /proc proc defaults 0 0 > > /dev/hda1 / ext3 defaults,errors=remount-ro 0 > 1 > > /dev/hda5 none swap sw 0 0 > > > > and the domain configuration file is attahed. > > > > Any sort of help would be appreciated! I've been stuck here since pretty > long :( > > > > Regards, > > Hardeep > > > > > > > > > > -- > > > > hardeep > > > > > > -- > hardeep > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users > >-- Marco Crociani - Tyrael * Perchè usare Formati Aperti? - http://www.openformats.org * Debian GNU/Linux - http://www.debian.org _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users