The real problem was absence of libvncserver on a build computer. This
error messages did not prevent booting from CDROM and installing
Windows.
On 5/19/06, Serge Dubrouski <sergeyfd@gmail.com>
wrote:> DELL PE 830 (Intel Pentium D with VT enabled).
> xen-unstable latest
> Trying to boot from CDROM and getting following error:
>
> (XEN) (GUEST: 1) Start BIOS ...
> (XEN) (GUEST: 1) Starting emulated 16-bit real-mode: ip=F000:FFF0
> (XEN) (GUEST: 1) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
> (XEN) (GUEST: 1) Remapping master: ICW2 0x8 -> 0x20
> (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 -> 0x28
> (XEN) (GUEST: 1) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
> vruppert Exp $
> (XEN) (GUEST: 1) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
> 2005/05/07 15:55:26 $
> (XEN) (GUEST: 1)
> (XEN) (GUEST: 1) ata0-0: PCHS=2082/16/63 translation=lba LCHS=1024/32/63
> (XEN) (GUEST: 1) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (1025 MBytes)
> (XEN) (GUEST: 1) ata0 slave: Unknown device
> (XEN) (GUEST: 1) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
> (XEN) (GUEST: 1) ata1 slave: Unknown device
> (XEN) (GUEST: 1)
> (XEN) (GUEST: 1) Booting from CD-Rom...
> (XEN) (GUEST: 1) unsupported PCI BIOS function 0x0E
> (XEN) (GUEST: 1) int13_harddisk: function 15, unmapped device for ELDL=81
> (XEN) (GUEST: 1) KBD: int09h_handler(): unknown scancode read!
>
> After that everything hangs.
>
> Any ideas?
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users