Michael Harris
2006-Feb-21 22:12 UTC
[Xen-users] peth0 must be added and removed from xenbr0 after xend starts.
I''m working with Xen 3.0, with kernel 2.6.12.6-xen3_7.1_rhel4.1 as
downloaded from the xensource website. This is installed on an IBM
x336 server (Broadcom Corporation NetXtreme BCM5721 integrated
network adapter).
I haven''t tampered with the configuration at all, but it seems that
i have no network connectivity unless i remove peth0 from the
bridge and then add it again.
Is this a known issue? And if so, what causes it?
[root@fuller ~]# egrep -v ''^#|^ *$'' /etc/xen/xend-config.sxp
(xend-http-server yes)
(xend-relocation-server yes)
(xend-address localhost)
(xend-relocation-address localhost)
(network-script network-bridge)
(vif-script vif-bridge)
(dom0-min-mem 196)
(dom0-cpus 0)
[root@fuller ~]# brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no peth0
vif0.0
[root@fuller ~]# ip route
XXX.XXX.XXX.0/24 dev eth0 proto kernel scope link src XXX.XXX.XXX.241
169.254.0.0/16 dev eth0 scope link
default via XXX.XXX.XXX.1 dev eth0
[root@fuller ~]# uname -a
Linux fuller.XXX.com 2.6.12.6-xen3_7.1_rhel4.1 #1 SMP Fri Feb 3
15:56:47 MST 2006 x86_64 x86_64 x86_64 GNU/Linux
--
/* Michael Harris **/float e,a,b,c,d;main(i){for(;b<4;b+=.1){
/* Systems Administrator **/for(a=0;a<4;a+=.06){c=d=0;for(i=99;--i&&
/* Maptuit Corporation */c*c+d*d<4;)e=c*c-d*d+a-2,d=2*c*d+b-2,c=e;
/* +1 (416)367-7336
****/putchar((char)i<=1?46:32);}puts("");}}
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users