Hi,
some weeks ago I posted about a problem booting Xen 3 on a rather old
system (Duron, SIS chipset). Now I managed to log the boot messages.
There are two files attached to this mail:
1. the bootup process with acpi enabled
2. the bootup process without acpi
Maybe important:
* Xen 2 is working on that machine - unfortunately with acpi=off only.
* all configuration options are defaults (downloaded xen-unstable-source,
make install, grub-config, reboot)
Does have anyone an Idea, how to get Xen3 running on this machine?
Regards,
Frank
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
Eduardo Costa Lisboa
2006-Feb-07 15:08 UTC
Re: [Xen-users] PCI bus missing, dom0 doesn''t boot
Hi, Frank. I see that your noacpi-dmesg says it: -- Root-NFS: No NFS server available, giving up. VFS: Unable to mount root fs via NFS, trying floppy. VFS: Insert root floppy and press ENTER -- You could check the following things: - if the "root=/dev/device" section of your config is correct - if the NFS exports are ok (in the case you are using a NFS root) - if your network card is compiled built-in instead of a module (are you using initrd?) -- Eduardo Costa Lisboa _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Hi, On Tue, Feb 07, 2006 at 01:08:55PM -0200, Eduardo Costa Lisboa wrote:> Hi, Frank. I see that your noacpi-dmesg says it: > > -- > > Root-NFS: No NFS server available, giving up. > VFS: Unable to mount root fs via NFS, trying floppy. > VFS: Insert root floppy and press ENTER > > -- > > You could check the following things: > > - if the "root=/dev/device" section of your config is correct > - if the NFS exports are ok (in the case you are using a NFS root) > - if your network card is compiled built-in instead of a module (are > you using initrd?)It''s the whole PCI bus that is missing. [...] PCI: System does not support PCI [...] I like that one - makes me feel like a proud owner of a 386er :-) Lots of drivers are loaded (my network card''s an my scsi-controller''s too) but they can''t do anything without a PCI bus. The attached noacpi-dmesg by accident contained the acpi-dmesg, too. I attached the correct one to this mail. Sorry for the confusion. Regards, Frank _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Hello, Okay this is quite some time ago, but the problem still has not vanished yet. I just tried my SiS board with xen 3.0.2 as well as with xen-unstable (straight from the repository tho) without having success as far as PCI-support is concerned. The bootlog is attached, as well as the kernel config (which doesnt differ that much from xen''s default just that 8139too (realtek ethernet card 10/100) is compiled into the kernel). Any further confirmation would be appreciated. regards, Patrick Frank Burkhardt schrieb:> Hi, > > some weeks ago I posted about a problem booting Xen 3 on a rather old > system (Duron, SIS chipset). Now I managed to log the boot messages. > > There are two files attached to this mail: > 1. the bootup process with acpi enabled > 2. the bootup process without acpi > > Maybe important: > * Xen 2 is working on that machine - unfortunately with acpi=off only. > * all configuration options are defaults (downloaded xen-unstable-source, > make install, grub-config, reboot) > > Does have anyone an Idea, how to get Xen3 running on this machine? > > Regards, > > Frank > > ------------------------------------------------------------------------ > > __ __ _____ ___ ___ > \ \/ /___ _ __ |___ / / _ \ / _ \ > \ // _ \ ''_ \ |_ \| | | | | | | > / \ __/ | | | ___) | |_| | |_| | > /_/\_\___|_| |_| |____(_)___(_)___/ > > http://www.cl.cam.ac.uk/netos/xen > University of Cambridge Computer Laboratory > > Xen version 3.0.0 (root@alpha) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) Tue Feb 7 14:14:51 CET 2006 > Latest ChangeSet: Wed Feb 1 21:27:35 2006 -0700 8734:927f9348206b > > (XEN) Physical RAM map: > (XEN) 0000000000000000 - 000000000009fc00 (usable) > (XEN) 000000000009fc00 - 00000000000a0000 (reserved) > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000001f7f0000 (usable) > (XEN) 000000001f7f0000 - 000000001f7f8000 (ACPI data) > (XEN) 000000001f7f8000 - 000000001f800000 (ACPI NVS) > (XEN) 00000000ffee0000 - 00000000fff00000 (reserved) > (XEN) 00000000fffc0000 - 0000000100000000 (reserved) > (XEN) System RAM: 503MB (515644kB) > (XEN) Xen heap: 10MB (10580kB) > (XEN) Using scheduler: Simple EDF Scheduler (sedf) > (XEN) PAE disabled. > (XEN) DMI 2.3 present. > (XEN) Using APIC driver default > (XEN) ACPI: RSDP (v000 AMI ) @ 0x000fa2e0 > (XEN) ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1f7f0000 > (XEN) ACPI: FADT (v002 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x1f7f0030 > (XEN) ACPI: DSDT (v001 SiS 740 0x00000100 MSFT 0x0100000d) @ 0x00000000 > (XEN) Local APIC disabled by BIOS -- you can enable it with "lapic" > (XEN) Initializing CPU#0 > (XEN) Detected 1016.410 MHz processor. > (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > (XEN) CPU: L2 Cache: 64K (64 bytes/line) > (XEN) CPU0: AMD Duron(tm) Processor stepping 01 > (XEN) SMP motherboard not detected. > (XEN) Local APIC not detected. Using dummy APIC emulation. > (XEN) Platform timer is 1.193MHz PIT > (XEN) Brought up 1 CPUs > (XEN) mtrr: v2.0 (20020519) > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen-ELF header found: ''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_BASE=0xC0000000,HYPERCALL_PAGE=0x104,PAE=no,LOADER=generic'' > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 01800000->02000000 (114349 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c0100000->c05e56bc > (XEN) Init. ramdisk: c05e6000->c05e6000 > (XEN) Phys-Mach map: c05e6000->c0657ab4 > (XEN) Start info: c0658000->c0659000 > (XEN) Page tables: c0659000->c065c000 > (XEN) Boot stack: c065c000->c065d000 > (XEN) TOTAL: c0000000->c0800000 > (XEN) ENTRY ADDRESS: c0100000 > (XEN) Scrubbing Free RAM: ......done. > (XEN) Xen trace buffers: disabled > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen). > Linux version 2.6.15-xen0 (root@enterprise) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) #1 Tue Feb 7 12:21:14 CET 2006 > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000001c6ad000 (usable) > 0MB HIGHMEM available. > 462MB LOWMEM available. > DMI 2.3 present. > IRQ lockup detection disabled > Allocating PCI resources starting at 1f800000 (gap: 1f800000:e06e0000) > Built 1 zonelists > Kernel command line: root=/dev/sda2 ro console=ttyS0,9600 > Initializing CPU#0 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Xen reported: 1016.410 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Software IO TLB enabled: > Aperture: 2 megabytes > Bus range: 0x0000000011a00000 - 0x0000000011c00000 > Kernel range: 0x00000000c0661000 - 0x00000000c0861000 > vmalloc area: dd800000-fb7fe000, maxmem 34000000 > Memory: 452864k/473780k available (3348k kernel code, 12224k reserved, 1011k data, 344k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 2544.01 BogoMIPS (lpj=5088028) > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 64K (64 bytes/line) > CPU: AMD Duron(tm) Processor stepping 01 > Enabling fast FPU save and restore... done. > Checking ''hlt'' instruction... disabled > ACPI: setting ELCR to 0200 (from cc20) > Grant table initialized > NET: Registered protocol family 16 > ACPI: bus type pci registered > ACPI: Subsystem revision 20050902 > ACPI: Access to PCI configuration space unavailable > ------------[ cut here ]------------ > kernel BUG at drivers/acpi/osl.c:507! > invalid operand: 0000 [#1] > Modules linked in: > CPU: 0 > EIP: 0061:[<c0232e67>] Not tainted VLI > EFLAGS: 00010246 (2.6.15-xen0) > EIP is at acpi_os_read_pci_configuration+0x45/0x88 > eax: 00000001 ebx: c1443460 ecx: 00000000 edx: 00001001 > esi: dc681be3 edi: dc681c13 ebp: dc681bb8 esp: dc681bb0 > ds: 007b es: 007b ss: 0069 > Process swapper (pid: 1, threadinfo=dc680000 task=c087ea10) > Stack: dc681be3 dc681c0c dc681bf0 c0232fda c1443460 0000000e dc681be3 00000008 > 00000006 00020000 c1443460 c14147a0 00000000 dc681c44 dc681c42 c046cc04 > dc681c14 c0233069 c065ee80 c1414660 dc681c4c dc681c0c dc681c13 00000001 > Call Trace: > [<c010824b>] show_stack+0xab/0xf0 > [<c0108412>] show_registers+0x162/0x200 > [<c0108630>] die+0xd0/0x160 > [<c0108749>] do_trap+0x89/0xd0 > [<c0108aaa>] do_invalid_op+0xaa/0xc0 > [<c0107ee7>] error_code+0x2b/0x30 > [<c0232fda>] acpi_os_derive_pci_id_2+0xb4/0x117 > [<c0233069>] acpi_os_derive_pci_id+0x2c/0x31 > [<c0237aad>] acpi_ev_pci_config_region_setup+0x1eb/0x202 > [<c0236c19>] acpi_ev_address_space_dispatch+0x53/0x11a > [<c023a8e4>] acpi_ex_access_region+0x47/0x91 > [<c023aa5f>] acpi_ex_field_datum_io+0xf8/0x18b > [<c023ac59>] acpi_ex_extract_from_field+0x7c/0x204 > [<c0239650>] acpi_ex_read_data_from_field+0x11c/0x14e > [<c023e062>] acpi_ex_resolve_node_to_value+0xb2/0xe8 > [<c0239dde>] acpi_ex_resolve_to_value+0x3a/0x52 > [<c023beb6>] acpi_ex_resolve_operands+0x1b1/0x34b > [<c0234ab3>] acpi_ds_exec_end_op+0x9b/0x344 > [<c0242467>] acpi_ps_parse_loop+0x4f7/0x7e0 > [<c0241dd6>] acpi_ps_parse_aml+0x4c/0x1e6 > [<c0242c49>] acpi_ps_execute_pass+0x78/0x8f > [<c0242b6b>] acpi_ps_execute_method+0x4b/0x76 > [<c02402fe>] acpi_ns_execute_control_method+0x44/0x55 > [<c024029b>] acpi_ns_evaluate_by_handle+0x75/0x94 > [<c024018d>] acpi_ns_evaluate_relative+0xa9/0xcd > [<c0246872>] acpi_ut_evaluate_object+0x2a/0x114 > [<c0246bd6>] acpi_ut_execute_STA+0x1c/0x4c > [<c0240f92>] acpi_ns_init_one_device+0x4f/0xbd > [<c0241317>] acpi_ns_walk_namespace+0x7e/0x107 > [<c0240e3f>] acpi_ns_initialize_devices+0x3f/0x52 > [<c0247654>] acpi_initialize_objects+0x2d/0x40 > [<c055bd25>] acpi_bus_init+0x27/0x8e > [<c055bdca>] acpi_init+0x3e/0x6d > [<c05469a2>] do_initcalls+0x32/0xe0 > [<c0546a75>] do_basic_setup+0x25/0x30 > [<c01050ad>] init+0x2d/0x160 > [<c0105d65>] kernel_thread_helper+0x5/0x10 > Code: 74 0c 83 f8 20 74 0e 83 f8 08 75 54 eb 0e b8 02 00 00 00 eb 0c b8 04 00 00 00 eb 05 b8 01 00 00 00 8b 0d 54 ee 5d c0 85 c9 75 08 <0f> 0b fb 01 b4 c5 46 c0 56 50 ff 75 0c 0f b7 43 04 0f b7 53 06 > <0>Kernel panic - not syncing: Attempted to kill init! > (XEN) Domain 0 shutdown: rebooting machine. > (XEN) Reboot disabled on cmdline: require manual reset > > ------------------------------------------------------------------------ > > __ __ _____ ___ ___ > \ \/ /___ _ __ |___ / / _ \ / _ \ > \ // _ \ ''_ \ |_ \| | | | | | | > / \ __/ | | | ___) | |_| | |_| | > /_/\_\___|_| |_| |____(_)___(_)___/ > > http://www.cl.cam.ac.uk/netos/xen > University of Cambridge Computer Laboratory > > Xen version 3.0.0 (root@alpha) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) Tue Feb 7 14:14:51 CET 2006 > Latest ChangeSet: Wed Feb 1 21:27:35 2006 -0700 8734:927f9348206b > > (XEN) Physical RAM map: > (XEN) 0000000000000000 - 000000000009fc00 (usable) > (XEN) 000000000009fc00 - 00000000000a0000 (reserved) > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000001f7f0000 (usable) > (XEN) 000000001f7f0000 - 000000001f7f8000 (ACPI data) > (XEN) 000000001f7f8000 - 000000001f800000 (ACPI NVS) > (XEN) 00000000ffee0000 - 00000000fff00000 (reserved) > (XEN) 00000000fffc0000 - 0000000100000000 (reserved) > (XEN) System RAM: 503MB (515644kB) > (XEN) Xen heap: 10MB (10580kB) > (XEN) Using scheduler: Simple EDF Scheduler (sedf) > (XEN) PAE disabled. > (XEN) DMI 2.3 present. > (XEN) Using APIC driver default > (XEN) ACPI: RSDP (v000 AMI ) @ 0x000fa2e0 > (XEN) ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1f7f0000 > (XEN) ACPI: FADT (v002 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x1f7f0030 > (XEN) ACPI: DSDT (v001 SiS 740 0x00000100 MSFT 0x0100000d) @ 0x00000000 > (XEN) Local APIC disabled by BIOS -- you can enable it with "lapic" > (XEN) Initializing CPU#0 > (XEN) Detected 1016.410 MHz processor. > (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > (XEN) CPU: L2 Cache: 64K (64 bytes/line) > (XEN) CPU0: AMD Duron(tm) Processor stepping 01 > (XEN) SMP motherboard not detected. > (XEN) Local APIC not detected. Using dummy APIC emulation. > (XEN) Platform timer is 1.193MHz PIT > (XEN) Brought up 1 CPUs > (XEN) mtrr: v2.0 (20020519) > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen-ELF header found: ''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_BASE=0xC0000000,HYPERCALL_PAGE=0x104,PAE=no,LOADER=generic'' > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 01800000->02000000 (114349 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c0100000->c05e56bc > (XEN) Init. ramdisk: c05e6000->c05e6000 > (XEN) Phys-Mach map: c05e6000->c0657ab4 > (XEN) Start info: c0658000->c0659000 > (XEN) Page tables: c0659000->c065c000 > (XEN) Boot stack: c065c000->c065d000 > (XEN) TOTAL: c0000000->c0800000 > (XEN) ENTRY ADDRESS: c0100000 > (XEN) Scrubbing Free RAM: ......done. > (XEN) Xen trace buffers: disabled > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen). > Linux version 2.6.15-xen0 (root@enterprise) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) #1 Tue Feb 7 12:21:14 CET 2006 > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000001c6ad000 (usable) > 0MB HIGHMEM available. > 462MB LOWMEM available. > DMI 2.3 present. > IRQ lockup detection disabled > Allocating PCI resources starting at 1f800000 (gap: 1f800000:e06e0000) > Built 1 zonelists > Kernel command line: root=/dev/sda2 ro console=ttyS0,9600 > Initializing CPU#0 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Xen reported: 1016.410 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Software IO TLB enabled: > Aperture: 2 megabytes > Bus range: 0x0000000011a00000 - 0x0000000011c00000 > Kernel range: 0x00000000c0661000 - 0x00000000c0861000 > vmalloc area: dd800000-fb7fe000, maxmem 34000000 > Memory: 452864k/473780k available (3348k kernel code, 12224k reserved, 1011k data, 344k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 2544.01 BogoMIPS (lpj=5088028) > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 64K (64 bytes/line) > CPU: AMD Duron(tm) Processor stepping 01 > Enabling fast FPU save and restore... done. > Checking ''hlt'' instruction... disabled > ACPI: setting ELCR to 0200 (from cc20) > Grant table initialized > NET: Registered protocol family 16 > ACPI: bus type pci registered > ACPI: Subsystem revision 20050902 > ACPI: Access to PCI configuration space unavailable > ------------[ cut here ]------------ > kernel BUG at drivers/acpi/osl.c:507! > invalid operand: 0000 [#1] > Modules linked in: > CPU: 0 > EIP: 0061:[<c0232e67>] Not tainted VLI > EFLAGS: 00010246 (2.6.15-xen0) > EIP is at acpi_os_read_pci_configuration+0x45/0x88 > eax: 00000001 ebx: c1443460 ecx: 00000000 edx: 00001001 > esi: dc681be3 edi: dc681c13 ebp: dc681bb8 esp: dc681bb0 > ds: 007b es: 007b ss: 0069 > Process swapper (pid: 1, threadinfo=dc680000 task=c087ea10) > Stack: dc681be3 dc681c0c dc681bf0 c0232fda c1443460 0000000e dc681be3 00000008 > 00000006 00020000 c1443460 c14147a0 00000000 dc681c44 dc681c42 c046cc04 > dc681c14 c0233069 c065ee80 c1414660 dc681c4c dc681c0c dc681c13 00000001 > Call Trace: > [<c010824b>] show_stack+0xab/0xf0 > [<c0108412>] show_registers+0x162/0x200 > [<c0108630>] die+0xd0/0x160 > [<c0108749>] do_trap+0x89/0xd0 > [<c0108aaa>] do_invalid_op+0xaa/0xc0 > [<c0107ee7>] error_code+0x2b/0x30 > [<c0232fda>] acpi_os_derive_pci_id_2+0xb4/0x117 > [<c0233069>] acpi_os_derive_pci_id+0x2c/0x31 > [<c0237aad>] acpi_ev_pci_config_region_setup+0x1eb/0x202 > [<c0236c19>] acpi_ev_address_space_dispatch+0x53/0x11a > [<c023a8e4>] acpi_ex_access_region+0x47/0x91 > [<c023aa5f>] acpi_ex_field_datum_io+0xf8/0x18b > [<c023ac59>] acpi_ex_extract_from_field+0x7c/0x204 > [<c0239650>] acpi_ex_read_data_from_field+0x11c/0x14e > [<c023e062>] acpi_ex_resolve_node_to_value+0xb2/0xe8 > [<c0239dde>] acpi_ex_resolve_to_value+0x3a/0x52 > [<c023beb6>] acpi_ex_resolve_operands+0x1b1/0x34b > [<c0234ab3>] acpi_ds_exec_end_op+0x9b/0x344 > [<c0242467>] acpi_ps_parse_loop+0x4f7/0x7e0 > [<c0241dd6>] acpi_ps_parse_aml+0x4c/0x1e6 > [<c0242c49>] acpi_ps_execute_pass+0x78/0x8f > [<c0242b6b>] acpi_ps_execute_method+0x4b/0x76 > [<c02402fe>] acpi_ns_execute_control_method+0x44/0x55 > [<c024029b>] acpi_ns_evaluate_by_handle+0x75/0x94 > [<c024018d>] acpi_ns_evaluate_relative+0xa9/0xcd > [<c0246872>] acpi_ut_evaluate_object+0x2a/0x114 > [<c0246bd6>] acpi_ut_execute_STA+0x1c/0x4c > [<c0240f92>] acpi_ns_init_one_device+0x4f/0xbd > [<c0241317>] acpi_ns_walk_namespace+0x7e/0x107 > [<c0240e3f>] acpi_ns_initialize_devices+0x3f/0x52 > [<c0247654>] acpi_initialize_objects+0x2d/0x40 > [<c055bd25>] acpi_bus_init+0x27/0x8e > [<c055bdca>] acpi_init+0x3e/0x6d > [<c05469a2>] do_initcalls+0x32/0xe0 > [<c0546a75>] do_basic_setup+0x25/0x30 > [<c01050ad>] init+0x2d/0x160 > [<c0105d65>] kernel_thread_helper+0x5/0x10 > Code: 74 0c 83 f8 20 74 0e 83 f8 08 75 54 eb 0e b8 02 00 00 00 eb 0c b8 04 00 00 00 eb 05 b8 01 00 00 00 8b 0d 54 ee 5d c0 85 c9 75 08 <0f> 0b fb 01 b4 c5 46 c0 56 50 ff 75 0c 0f b7 43 04 0f b7 53 06 > <0>Kernel panic - not syncing: Attempted to kill init! > (XEN) Domain 0 shutdown: rebooting machine. > (XEN) Reboot disabled on cmdline: require manual reset > __ __ _____ ___ ___ > \ \/ /___ _ __ |___ / / _ \ / _ \ > \ // _ \ ''_ \ |_ \| | | | | | | > / \ __/ | | | ___) | |_| | |_| | > /_/\_\___|_| |_| |____(_)___(_)___/ > > http://www.cl.cam.ac.uk/netos/xen > University of Cambridge Computer Laboratory > > Xen version 3.0.0 (root@alpha) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) Tue Feb 7 14:14:51 CET 2006 > Latest ChangeSet: Wed Feb 1 21:27:35 2006 -0700 8734:927f9348206b > > (XEN) Physical RAM map: > (XEN) 0000000000000000 - 000000000009fc00 (usable) > (XEN) 000000000009fc00 - 00000000000a0000 (reserved) > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000001f7f0000 (usable) > (XEN) 000000001f7f0000 - 000000001f7f8000 (ACPI data) > (XEN) 000000001f7f8000 - 000000001f800000 (ACPI NVS) > (XEN) 00000000ffee0000 - 00000000fff00000 (reserved) > (XEN) 00000000fffc0000 - 0000000100000000 (reserved) > (XEN) System RAM: 503MB (515644kB) > (XEN) Xen heap: 10MB (10580kB) > (XEN) Using scheduler: Simple EDF Scheduler (sedf) > (XEN) PAE disabled. > (XEN) DMI 2.3 present. > (XEN) Using APIC driver default > (XEN) Local APIC disabled by BIOS -- you can enable it with "lapic" > (XEN) Initializing CPU#0 > (XEN) Detected 1016.410 MHz processor. > (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > (XEN) CPU: L2 Cache: 64K (64 bytes/line) > (XEN) CPU0: AMD Duron(tm) Processor stepping 01 > (XEN) SMP motherboard not detected. > (XEN) Local APIC not detected. Using dummy APIC emulation. > (XEN) Platform timer is 1.193MHz PIT > (XEN) Brought up 1 CPUs > (XEN) mtrr: v2.0 (20020519) > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen-ELF header found: ''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_BASE=0xC0000000,HYPERCALL_PAGE=0x104,PAE=no,LOADER=generic'' > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 01800000->02000000 (114349 pages to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c0100000->c05e56bc > (XEN) Init. ramdisk: c05e6000->c05e6000 > (XEN) Phys-Mach map: c05e6000->c0657ab4 > (XEN) Start info: c0658000->c0659000 > (XEN) Page tables: c0659000->c065c000 > (XEN) Boot stack: c065c000->c065d000 > (XEN) TOTAL: c0000000->c0800000 > (XEN) ENTRY ADDRESS: c0100000 > (XEN) Scrubbing Free RAM: ......done. > (XEN) Xen trace buffers: disabled > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen). > Linux version 2.6.15-xen0 (root@enterprise) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) #1 Tue Feb 7 12:21:14 CET 2006 > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000001c6ad000 (usable) > 0MB HIGHMEM available. > 462MB LOWMEM available. > DMI 2.3 present. > IRQ lockup detection disabled > Allocating PCI resources starting at 1f800000 (gap: 1f800000:e06e0000) > Built 1 zonelists > Kernel command line: root=/dev/sda2 ro console=ttyS0,9600 acpi=off > Initializing CPU#0 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Xen reported: 1016.410 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Software IO TLB enabled: > Aperture: 2 megabytes > Bus range: 0x0000000011a00000 - 0x0000000011c00000 > Kernel range: 0x00000000c0661000 - 0x00000000c0861000 > vmalloc area: dd800000-fb7fe000, maxmem 34000000 > Memory: 452864k/473780k available (3348k kernel code, 12224k reserved, 1011k data, 344k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 2543.98 BogoMIPS (lpj=5087961) > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 64K (64 bytes/line) > CPU: AMD Duron(tm) Processor stepping 01 > Enabling fast FPU save and restore... done. > Checking ''hlt'' instruction... disabled > Grant table initialized > NET: Registered protocol family 16 > ACPI: Subsystem revision 20050902 > ACPI: Interpreter disabled. > xen_mem: Initialising balloon driver. > SCSI subsystem initialized > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: System does not support PCI > PCI: System does not support PCI > IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com> > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > HP CISS Driver (v 2.6.8) > Intel(R) PRO/1000 Network Driver - version 6.1.16-k2 > Copyright (c) 1999-2005 Intel Corporation. > pcnet32.c:v1.31c 01.Nov.2005 tsbogend@alpha.franken.de > e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> > Xen virtual console successfully installed as ttyS0 > Event-channel device installed. > blkif_init: reqs=64, pages=704, mmap_vstart=0xdc000000 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx > Adaptec aacraid driver (1.1-4 Feb 7 2006 12:15:22) > 3ware Storage Controller device driver for Linux v1.26.02.001. > usbmon: debugfs is not available > USB Universal Host Controller Interface driver v2.3 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > mice: PS/2 mouse device common for all mice > md: raid0 personality registered as nr 2 > md: raid1 personality registered as nr 3 > md: raid5 personality registered as nr 4 > raid5: measuring checksumming speed > 8regs : 3863.000 MB/sec > 8regs_prefetch: 3250.000 MB/sec > 32regs : 2822.000 MB/sec > 32regs_prefetch: 2179.000 MB/sec > pII_mmx : 4867.000 MB/sec > p5_mmx : 5861.000 MB/sec > raid5: using function: p5_mmx (5861.000 MB/sec) > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com > NET: Registered protocol family 2 > input: AT Translated Set 2 keyboard as /class/input/input0 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 4, 65536 bytes) > TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Bridge firewalling registered > Using IPI Shortcut mode > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > Root-NFS: No NFS server available, giving up. > VFS: Unable to mount root fs via NFS, trying floppy. > VFS: Insert root floppy and press ENTER > input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Wed, Apr 19, 2006 at 10:19:04PM +0200, Patrick wrote:> Okay this is quite some time ago, but the problem still has not vanished > yet. I just tried my SiS board with xen 3.0.2 as well as with > xen-unstable (straight from the repository tho) without having success > as far as PCI-support is concerned. > The bootlog is attached, as well as the kernel config (which doesnt > differ that much from xen''s default just that 8139too (realtek ethernet > card 10/100) is compiled into the kernel). > > Any further confirmation would be appreciated.there''s actually a bug with SiS chipset, that prevent Xen from recognizing the PCI bus for (yet) unknown reasons. see bug #556: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=556 -- Vincent Hanquez _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
schnick@vschnick
2006-Apr-20 10:14 UTC
Re: [Xen-users] PCI bus missing, dom0 doesn''t boot
Hi, I had this ''bug'' months before as well .. so I am fairly familiar that it''s not a problem as far as setup is concerned. But nevertheless I''d like to have some developer''s opinion about it, and hopefully an ETA when it''ll be fixed. But for all those who currently still suffer from that problem - I can recommend using linux-vserver as virtual server instance, as it''s not that slow either but it''s working fine on SiS chipsets though. regards, Patrick Vincent Hanquez wrote:>On Wed, Apr 19, 2006 at 10:19:04PM +0200, Patrick wrote: > > >>Okay this is quite some time ago, but the problem still has not vanished >>yet. I just tried my SiS board with xen 3.0.2 as well as with >>xen-unstable (straight from the repository tho) without having success >>as far as PCI-support is concerned. >>The bootlog is attached, as well as the kernel config (which doesnt >>differ that much from xen''s default just that 8139too (realtek ethernet >>card 10/100) is compiled into the kernel). >> >>Any further confirmation would be appreciated. >> >> > >there''s actually a bug with SiS chipset, that prevent Xen from >recognizing the PCI bus for (yet) unknown reasons. > >see bug #556: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=556 > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users