thr3ads.net - Xen users - [Xen-users] VIA sata + Xen 3.0 boot lockup problems [Dec 2005]

If this information is useful, please help other people find it:
Share via:

Randolph Oliveira

2005-Dec-15 13:31 UTC

[Xen-users] VIA sata + Xen 3.0 boot lockup problems

Hello!

I`m trying to boot a via sata machine with xen 3.0
with no sucess. It just freezes at this point:

*********
ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] ->
GSI 10 (level,low) -> IRQ 10
sata_via (0000:00:0f.0): routed to hard irq line 10
ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma
0xEF90 irq 10
ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma
0xEF98 irq 10
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors:
lba48
*********

and then only a hard reset modifies this state. the
hard disc seems to be detected but i don`t have a clue
what`s going on. I`ve beeing running xen 2.0.7 on this
machine without any problems. Below is attached a
lspci output:

lspci:

0000:00:00.0 Host bridge: VIA Technologies, Inc.
VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237
PCI Bridge
0000:00:0f.0 RAID bus controller: VIA Technologies,
Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master
IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc.
USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237
ISA bridge [K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA
Technologies, Inc. VT8233/A/8235/8237 AC97 Audio
Controller (rev 60)
0000:00:12.0 Ethernet controller: VIA Technologies,
Inc. VT6102 [Rhine-II] (rev 78)
0000:01:00.0 VGA compatible controller: nVidia
Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)

Any help is appreciated!

Thanks,
Randolph


	



	
		
_______________________________________________________ 
Yahoo! doce lar. Faça do Yahoo! sua homepage. 
http://br.yahoo.com/homepageset.html 


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Jerone Young

2005-Dec-15 16:24 UTC

head link

Re: [Xen-users] VIA sata + Xen 3.0 boot lockup problems

Looking at your output..try booting Xen with command line perameter
"acpi=off" and see what happens.
		

On Thu, 2005-12-15 at 13:31 +0000, Randolph Oliveira
wrote:> Hello!
> 
> I`m trying to boot a via sata machine with xen 3.0
> with no sucess. It just freezes at this point:
> 
> *********
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] ->
> GSI 10 (level,low) -> IRQ 10
> sata_via (0000:00:0f.0): routed to hard irq line 10
> ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma
> 0xEF90 irq 10
> ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma
> 0xEF98 irq 10
> ata1: dev 0 ATA, max UDMA/133, 156301488 sectors:
> lba48
> *********
> 
> and then only a hard reset modifies this state. the
> hard disc seems to be detected but i don`t have a clue
> what`s going on. I`ve beeing running xen 2.0.7 on this
> machine without any problems. Below is attached a
> lspci output:
> 
> lspci:
> 
> 0000:00:00.0 Host bridge: VIA Technologies, Inc.
> VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237
> PCI Bridge
> 0000:00:0f.0 RAID bus controller: VIA Technologies,
> Inc. VIA VT6420 SATA RAID Controller (rev 80)
> 0000:00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master
> IDE (rev 06)
> 0000:00:10.0 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.1 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.2 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.3 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.4 USB Controller: VIA Technologies, Inc.
> USB 2.0 (rev 86)
> 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237
> ISA bridge [K8T800 South]
> 0000:00:11.5 Multimedia audio controller: VIA
> Technologies, Inc. VT8233/A/8235/8237 AC97 Audio
> Controller (rev 60)
> 0000:00:12.0 Ethernet controller: VIA Technologies,
> Inc. VT6102 [Rhine-II] (rev 78)
> 0000:01:00.0 VGA compatible controller: nVidia
> Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)
> 
> Any help is appreciated!
> 
> Thanks,
> Randolph
> 
> 
> 	
> 
> 
> 
> 	
> 		
> _______________________________________________________ 
> Yahoo! doce lar. Faça do Yahoo! sua homepage. 
> http://br.yahoo.com/homepageset.html 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
> 

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Randolph Oliveira

2005-Dec-16 13:12 UTC

head link

Re: [Xen-users] VIA sata + Xen 3.0 boot lockup problems

Hello!

Thanks for your help. I tried the option "acpi=off"
and it seemed to work (at least the system does not
lockup at that point). Now it does a kernel panic:

**************
kernel panic - not syncing: VFS: Unable to mount root
fs on uknown-block(0,0)
RAMDISK: Loading 1136KiB [1 disk] into ram disk...
done
**************

My root filesystem is at /dev/sda5 and it''s using
ext3. I compiled the kernel with ext3 fs support
built-in. I''ve attached more information below. Any
more help is appreciated :).

Thanks!
Randolph

mount:
/dev/sda5 on / type ext3 (rw,errors=remount-ro)

.config: (sorry a bit large)

#
# Automatically generated make config: don''t edit
# Linux kernel version: 2.6.12.6-xen0
# Fri Dec 16 09:38:51 2005
#
CONFIG_XEN=y
CONFIG_ARCH_XEN=y
CONFIG_NO_IDLE_HZ=y

#
# XEN
#
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PHYSDEV_ACCESS=y
CONFIG_XEN_BLKDEV_BACKEND=y
# CONFIG_XEN_BLKDEV_TAP_BE is not set
CONFIG_XEN_NETDEV_BACKEND=y
# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
# CONFIG_XEN_TPMDEV_FRONTEND is not set
# CONFIG_XEN_TPMDEV_BACKEND is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_BLKDEV_TAP is not set
# CONFIG_XEN_SHADOW_MODE is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_X86=y
# CONFIG_XEN_X86_64 is not set
CONFIG_HAVE_ARCH_ALLOC_SKB=y
CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# X86 Processor Configuration
#
CONFIG_XENARCH="i386"
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_X86_CPUID=y
CONFIG_SWIOTLB=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_MTRR=y
# CONFIG_REGPARM is not set
CONFIG_X86_LOCAL_APIC=y

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_X86_UP_APIC=y
# CONFIG_X86_UP_IOAPIC is not set
CONFIG_PCI=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
CONFIG_SECCOMP=y
CONFIG_EARLY_PRINTK=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on
IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple
LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=y
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=y
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_TUNNEL=y
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
CONFIG_IP_NF_MATCH_IPRANGE=m
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
# CONFIG_IP_NF_MATCH_STATE is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_FTP=m
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=y

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
CONFIG_VLAN_8021Q=y
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas''s 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and ''SCSI disk
support'' may also be needed; see USB_STORAGE Help for
more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m

#
# Video4Linux support is needed for USB Multimedia
device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# Power management options
#

#
# ACPI (Advanced Configuration and Power Interface)
Support
#
# CONFIG_ACPI is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#### end ######

--- Jerone Young <jyoung5@us.ibm.com> escreveu:
> Looking at your output..try booting Xen with command
> line perameter
> "acpi=off" and see what happens.
> 		
> 
> On Thu, 2005-12-15 at 13:31 +0000, Randolph Oliveira
> wrote:
> > Hello!
> > 
> > I`m trying to boot a via sata machine with xen 3.0
> > with no sucess. It just freezes at this point:
> > 
> > *********
> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB]
> ->
> > GSI 10 (level,low) -> IRQ 10
> > sata_via (0000:00:0f.0): routed to hard irq line
> 10
> > ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE
> bmdma
> > 0xEF90 irq 10
> > ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA
> bmdma
> > 0xEF98 irq 10
> > ata1: dev 0 ATA, max UDMA/133, 156301488 sectors:
> > lba48
> > *********
> > 
> > and then only a hard reset modifies this state.
> the
> > hard disc seems to be detected but i don`t have a
> clue
> > what`s going on. I`ve beeing running xen 2.0.7 on
> this
> > machine without any problems. Below is attached a
> > lspci output:
> > 
> > lspci:
> > 
> > 0000:00:00.0 Host bridge: VIA Technologies, Inc.
> > VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
> > 0000:00:01.0 PCI bridge: VIA Technologies, Inc.
> VT8237
> > PCI Bridge
> > 0000:00:0f.0 RAID bus controller: VIA
> Technologies,
> > Inc. VIA VT6420 SATA RAID Controller (rev 80)
> > 0000:00:0f.1 IDE interface: VIA Technologies, Inc.
> > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus
> Master
> > IDE (rev 06)
> > 0000:00:10.0 USB Controller: VIA Technologies,
> Inc.
> > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > 0000:00:10.1 USB Controller: VIA Technologies,
> Inc.
> > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > 0000:00:10.2 USB Controller: VIA Technologies,
> Inc.
> > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > 0000:00:10.3 USB Controller: VIA Technologies,
> Inc.
> > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > 0000:00:10.4 USB Controller: VIA Technologies,
> Inc.
> > USB 2.0 (rev 86)
> > 0000:00:11.0 ISA bridge: VIA Technologies, Inc.
> VT8237
> > ISA bridge [K8T800 South]
> > 0000:00:11.5 Multimedia audio controller: VIA
> > Technologies, Inc. VT8233/A/8235/8237 AC97 Audio
> > Controller (rev 60)
> > 0000:00:12.0 Ethernet controller: VIA
> Technologies,
> > Inc. VT6102 [Rhine-II] (rev 78)
> > 0000:01:00.0 VGA compatible controller: nVidia
> > Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev
> c1)
> > 
> > Any help is appreciated!
> > 
> > Thanks,
> > Randolph
> > 
> > 
> > 	
> > 
> > 
> > 
> > 	
> > 		
> >
>
_______________________________________________________> 
> > Yahoo! doce lar. Faça do Yahoo! sua homepage. 
> > http://br.yahoo.com/homepageset.html 
> > 
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> > 
> 
> 


	


	
		
_______________________________________________________ 
Yahoo! doce lar. Faça do Yahoo! sua homepage. 
http://br.yahoo.com/homepageset.html 


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Ian Pratt

2005-Dec-17 03:24 UTC

head link

RE: [Xen-users] VIA sata + Xen 3.0 boot lockup problems

# CONFIG_X86_UP_IOAPIC is not set

This is likely your problem.

 
> -----Original Message-----
> From: xen-users-bounces@lists.xensource.com 
> [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of 
> Randolph Oliveira
> Sent: 16 December 2005 05:12
> To: Jerone Young
> Cc: xen-users@lists.xensource.com
> Subject: Re: [Xen-users] VIA sata + Xen 3.0 boot lockup problems
> 
> Hello!
> 
> Thanks for your help. I tried the option "acpi=off"
> and it seemed to work (at least the system does not
> lockup at that point). Now it does a kernel panic:
> 
> **************
> kernel panic - not syncing: VFS: Unable to mount root
> fs on uknown-block(0,0)
> RAMDISK: Loading 1136KiB [1 disk] into ram disk...
> done
> **************
> 
> My root filesystem is at /dev/sda5 and it''s using
> ext3. I compiled the kernel with ext3 fs support
> built-in. I''ve attached more information below. Any
> more help is appreciated :).
> 
> Thanks!
> Randolph
> 
> mount:
> /dev/sda5 on / type ext3 (rw,errors=remount-ro)
> 
> .config: (sorry a bit large)
> 
> #
> # Automatically generated make config: don''t edit
> # Linux kernel version: 2.6.12.6-xen0
> # Fri Dec 16 09:38:51 2005
> #
> CONFIG_XEN=y
> CONFIG_ARCH_XEN=y
> CONFIG_NO_IDLE_HZ=y
> 
> #
> # XEN
> #
> CONFIG_XEN_PRIVILEGED_GUEST=y
> CONFIG_XEN_PHYSDEV_ACCESS=y
> CONFIG_XEN_BLKDEV_BACKEND=y
> # CONFIG_XEN_BLKDEV_TAP_BE is not set
> CONFIG_XEN_NETDEV_BACKEND=y
> # CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
> # CONFIG_XEN_TPMDEV_FRONTEND is not set
> # CONFIG_XEN_TPMDEV_BACKEND is not set
> CONFIG_XEN_BLKDEV_FRONTEND=y
> CONFIG_XEN_NETDEV_FRONTEND=y
> # CONFIG_XEN_BLKDEV_TAP is not set
> # CONFIG_XEN_SHADOW_MODE is not set
> CONFIG_XEN_SCRUB_PAGES=y
> CONFIG_XEN_X86=y
> # CONFIG_XEN_X86_64 is not set
> CONFIG_HAVE_ARCH_ALLOC_SKB=y
> CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> # CONFIG_CLEAN_COMPILE is not set
> CONFIG_BROKEN=y
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> 
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> CONFIG_HOTPLUG=y
> CONFIG_KOBJECT_UEVENT=y
> CONFIG_IKCONFIG=y
> # CONFIG_IKCONFIG_PROC is not set
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> 
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_OBSOLETE_MODPARM=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_KMOD=y
> 
> #
> # X86 Processor Configuration
> #
> CONFIG_XENARCH="i386"
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_HPET_TIMER is not set
> # CONFIG_HPET_EMULATE_RTC is not set
> # CONFIG_SMP is not set
> # CONFIG_X86_REBOOTFIXUPS is not set
> CONFIG_MICROCODE=y
> CONFIG_X86_CPUID=y
> CONFIG_SWIOTLB=y
> 
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_NOHIGHMEM is not set
> CONFIG_HIGHMEM4G=y
> # CONFIG_HIGHMEM64G is not set
> CONFIG_HIGHMEM=y
> CONFIG_MTRR=y
> # CONFIG_REGPARM is not set
> CONFIG_X86_LOCAL_APIC=y
> 
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_X86_UP_APIC=y
> # CONFIG_X86_UP_IOAPIC is not set
> CONFIG_PCI=y
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_PCIEPORTBUS is not set
> CONFIG_PCI_LEGACY_PROC=y
> CONFIG_PCI_NAMES=y
> CONFIG_ISA_DMA_API=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> 
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
> 
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_PC=y
> CONFIG_SECCOMP=y
> CONFIG_EARLY_PRINTK=y
> 
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_AOUT is not set
> # CONFIG_BINFMT_MISC is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> # CONFIG_STANDALONE is not set
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
> 
> #
> # Plug and Play support
> #
> 
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_CRYPTOLOOP=y
> CONFIG_BLK_DEV_NBD=y
> CONFIG_BLK_DEV_SX8=y
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_LBD=y
> # CONFIG_CDROM_PKTCDVD is not set
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_ATA_OVER_ETH is not set
> 
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> 
> #
> # Please see Documentation/ide.txt for help/info on
> IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> # CONFIG_IDEDISK_MULTI_MODE is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> CONFIG_IDE_TASK_IOCTL=y
> 
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
> 
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=m
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple
> LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> 
> #
> # SCSI Transport Attributes
> #
> CONFIG_SCSI_SPI_ATTRS=y
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> CONFIG_SCSI_SATA=y
> CONFIG_SCSI_SATA_AHCI=y
> # CONFIG_SCSI_SATA_SVW is not set
> # CONFIG_SCSI_ATA_PIIX is not set
> # CONFIG_SCSI_SATA_NV is not set
> # CONFIG_SCSI_SATA_PROMISE is not set
> # CONFIG_SCSI_SATA_QSTOR is not set
> # CONFIG_SCSI_SATA_SX4 is not set
> # CONFIG_SCSI_SATA_SIL is not set
> # CONFIG_SCSI_SATA_SIS is not set
> # CONFIG_SCSI_SATA_ULI is not set
> CONFIG_SCSI_SATA_VIA=y
> # CONFIG_SCSI_SATA_VITESSE is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX=y
> # CONFIG_SCSI_QLA21XX is not set
> # CONFIG_SCSI_QLA22XX is not set
> # CONFIG_SCSI_QLA2300 is not set
> # CONFIG_SCSI_QLA2322 is not set
> # CONFIG_SCSI_QLA6312 is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID10 is not set
> # CONFIG_MD_RAID5 is not set
> # CONFIG_MD_RAID6 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> CONFIG_BLK_DEV_DM=y
> # CONFIG_DM_CRYPT is not set
> # CONFIG_DM_SNAPSHOT is not set
> # CONFIG_DM_MIRROR is not set
> # CONFIG_DM_ZERO is not set
> # CONFIG_DM_MULTIPATH is not set
> 
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
> 
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> 
> #
> # Networking support
> #
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_UNIX=y
> CONFIG_NET_KEY=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> # CONFIG_IP_MULTIPLE_TABLES is not set
> # CONFIG_IP_ROUTE_MULTIPATH is not set
> # CONFIG_IP_ROUTE_VERBOSE is not set
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> # CONFIG_IP_PNP_BOOTP is not set
> # CONFIG_IP_PNP_RARP is not set
> CONFIG_NET_IPIP=y
> # CONFIG_NET_IPGRE is not set
> CONFIG_IP_MROUTE=y
> # CONFIG_IP_PIMSM_V1 is not set
> # CONFIG_IP_PIMSM_V2 is not set
> # CONFIG_ARPD is not set
> # CONFIG_SYN_COOKIES is not set
> CONFIG_INET_AH=y
> CONFIG_INET_ESP=y
> CONFIG_INET_IPCOMP=y
> CONFIG_INET_TUNNEL=y
> CONFIG_IP_TCPDIAG=y
> # CONFIG_IP_TCPDIAG_IPV6 is not set
> 
> #
> # IP: Virtual Server Configuration
> #
> # CONFIG_IP_VS is not set
> # CONFIG_IPV6 is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_BRIDGE_NETFILTER=y
> 
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_CT_ACCT=y
> # CONFIG_IP_NF_CONNTRACK_MARK is not set
> # CONFIG_IP_NF_CT_PROTO_SCTP is not set
> CONFIG_IP_NF_FTP=m
> # CONFIG_IP_NF_IRC is not set
> # CONFIG_IP_NF_TFTP is not set
> # CONFIG_IP_NF_AMANDA is not set
> # CONFIG_IP_NF_QUEUE is not set
> CONFIG_IP_NF_IPTABLES=m
> # CONFIG_IP_NF_MATCH_LIMIT is not set
> CONFIG_IP_NF_MATCH_IPRANGE=m
> # CONFIG_IP_NF_MATCH_MAC is not set
> # CONFIG_IP_NF_MATCH_PKTTYPE is not set
> # CONFIG_IP_NF_MATCH_MARK is not set
> # CONFIG_IP_NF_MATCH_MULTIPORT is not set
> # CONFIG_IP_NF_MATCH_TOS is not set
> # CONFIG_IP_NF_MATCH_RECENT is not set
> # CONFIG_IP_NF_MATCH_ECN is not set
> # CONFIG_IP_NF_MATCH_DSCP is not set
> # CONFIG_IP_NF_MATCH_AH_ESP is not set
> # CONFIG_IP_NF_MATCH_LENGTH is not set
> # CONFIG_IP_NF_MATCH_TTL is not set
> # CONFIG_IP_NF_MATCH_TCPMSS is not set
> # CONFIG_IP_NF_MATCH_HELPER is not set
> # CONFIG_IP_NF_MATCH_STATE is not set
> # CONFIG_IP_NF_MATCH_CONNTRACK is not set
> # CONFIG_IP_NF_MATCH_OWNER is not set
> # CONFIG_IP_NF_MATCH_PHYSDEV is not set
> # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
> # CONFIG_IP_NF_MATCH_REALM is not set
> # CONFIG_IP_NF_MATCH_SCTP is not set
> # CONFIG_IP_NF_MATCH_COMMENT is not set
> # CONFIG_IP_NF_MATCH_HASHLIMIT is not set
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> # CONFIG_IP_NF_TARGET_LOG is not set
> # CONFIG_IP_NF_TARGET_ULOG is not set
> # CONFIG_IP_NF_TARGET_TCPMSS is not set
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> # CONFIG_IP_NF_TARGET_REDIRECT is not set
> # CONFIG_IP_NF_TARGET_NETMAP is not set
> # CONFIG_IP_NF_TARGET_SAME is not set
> # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
> CONFIG_IP_NF_NAT_FTP=m
> # CONFIG_IP_NF_MANGLE is not set
> # CONFIG_IP_NF_RAW is not set
> # CONFIG_IP_NF_ARPTABLES is not set
> 
> #
> # Bridge: Netfilter Configuration
> #
> # CONFIG_BRIDGE_NF_EBTABLES is not set
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=y
> 
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> CONFIG_BRIDGE=y
> CONFIG_VLAN_8021Q=y
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> # CONFIG_NET_CLS_ROUTE is not set
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> CONFIG_NETDEVICES=y
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> 
> #
> # Tulip family network device support
> #
> CONFIG_NET_TULIP=y
> # CONFIG_DE2104X is not set
> CONFIG_TULIP=y
> # CONFIG_TULIP_MWI is not set
> # CONFIG_TULIP_MMIO is not set
> # CONFIG_TULIP_NAPI is not set
> # CONFIG_DE4X5 is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_DM9102 is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_FORCEDETH is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> CONFIG_VIA_RHINE=y
> # CONFIG_VIA_RHINE_MMIO is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_VIA_VELOCITY is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
> 
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
> 
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> 
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_PCSPKR is not set
> CONFIG_INPUT_UINPUT=y
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
> 
> #
> # Serial drivers
> #
> # CONFIG_SERIAL_8250 is not set
> 
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> 
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=m
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> # CONFIG_AGP_INTEL is not set
> CONFIG_AGP_NVIDIA=m
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> CONFIG_AGP_VIA=m
> # CONFIG_AGP_EFFICEON is not set
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HANGCHECK_TIMER is not set
> 
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
> 
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> 
> #
> # Dallas''s 1-wire bus
> #
> # CONFIG_W1 is not set
> 
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> 
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> 
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
> 
> #
> # Sound
> #
> CONFIG_SOUND=y
> 
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=m
> CONFIG_SND_RAWMIDI=m
> CONFIG_SND_SEQUENCER=y
> # CONFIG_SND_SEQ_DUMMY is not set
> # CONFIG_SND_MIXER_OSS is not set
> # CONFIG_SND_PCM_OSS is not set
> # CONFIG_SND_SEQUENCER_OSS is not set
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> 
> #
> # Generic devices
> #
> CONFIG_SND_MPU401_UART=m
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> 
> #
> # PCI devices
> #
> CONFIG_SND_AC97_CODEC=m
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_CA0106 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> CONFIG_SND_INTEL8X0=m
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_SONICVIBES is not set
> CONFIG_SND_VIA82XX=m
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_HDA_INTEL is not set
> 
> #
> # USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
> # CONFIG_SND_USB_USX2Y is not set
> 
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
> 
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> 
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_OTG is not set
> 
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_SPLIT_ISO is not set
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> 
> #
> # NOTE: USB_STORAGE enables SCSI, and ''SCSI disk
> support'' may also be needed; see USB_STORAGE Help for
> more information
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> 
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> # CONFIG_HID_FF is not set
> # CONFIG_USB_HIDDEV is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_MTOUCH is not set
> # CONFIG_USB_EGALAX is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> 
> #
> # USB Multimedia devices
> #
> CONFIG_USB_DABUSB=m
> 
> #
> # Video4Linux support is needed for USB Multimedia
> device support
> #
> 
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> CONFIG_USB_MON=y
> 
> #
> # USB port drivers
> #
> 
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGETKIT is not set
> # CONFIG_USB_PHIDGETSERVO is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_TEST is not set
> 
> #
> # USB ATM/DSL drivers
> #
> 
> #
> # USB Gadget Support
> #
> CONFIG_USB_GADGET=m
> # CONFIG_USB_GADGET_DEBUG_FILES is not set
> CONFIG_USB_GADGET_NET2280=y
> CONFIG_USB_NET2280=m
> # CONFIG_USB_GADGET_PXA2XX is not set
> # CONFIG_USB_GADGET_GOKU is not set
> # CONFIG_USB_GADGET_LH7A40X is not set
> # CONFIG_USB_GADGET_OMAP is not set
> # CONFIG_USB_GADGET_DUMMY_HCD is not set
> CONFIG_USB_GADGET_DUALSPEED=y
> # CONFIG_USB_ZERO is not set
> # CONFIG_USB_ETH is not set
> # CONFIG_USB_GADGETFS is not set
> # CONFIG_USB_FILE_STORAGE is not set
> # CONFIG_USB_G_SERIAL is not set
> 
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
> 
> #
> # InfiniBand support
> #
> # CONFIG_INFINIBAND is not set
> 
> #
> # Power management options
> #
> 
> #
> # ACPI (Advanced Configuration and Power Interface)
> Support
> #
> # CONFIG_ACPI is not set
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> # CONFIG_EXT3_FS_POSIX_ACL is not set
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> CONFIG_REISERFS_FS_XATTR=y
> # CONFIG_REISERFS_FS_POSIX_ACL is not set
> # CONFIG_REISERFS_FS_SECURITY is not set
> # CONFIG_JFS_FS is not set
> 
> #
> # XFS support
> #
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> CONFIG_ROMFS_FS=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> CONFIG_AUTOFS_FS=y
> # CONFIG_AUTOFS4_FS is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=m
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=m
> # CONFIG_UDF_FS is not set
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_TMPFS_XATTR is not set
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> 
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> 
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V4 is not set
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=y
> CONFIG_NFSD_V3=y
> # CONFIG_NFSD_V4 is not set
> CONFIG_NFSD_TCP=y
> CONFIG_ROOT_NFS=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_SUNRPC=y
> # CONFIG_RPCSEC_GSS_KRB5 is not set
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> CONFIG_NLS_CODEPAGE_860=y
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> 
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
> 
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_NULL is not set
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=m
> # CONFIG_CRYPTO_WP512 is not set
> # CONFIG_CRYPTO_TGR192 is not set
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_BLOWFISH=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_SERPENT=m
> CONFIG_CRYPTO_AES_586=m
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_TEA=m
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_KHAZAD=m
> CONFIG_CRYPTO_ANUBIS=m
> CONFIG_CRYPTO_DEFLATE=y
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> CONFIG_CRYPTO_CRC32C=m
> # CONFIG_CRYPTO_TEST is not set
> 
> #
> # Hardware crypto devices
> #
> CONFIG_CRYPTO_DEV_PADLOCK=y
> CONFIG_CRYPTO_DEV_PADLOCK_AES=y
> 
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> CONFIG_CRC32=y
> CONFIG_LIBCRC32C=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> 
> #
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
> 
> #### end ######
> 
> --- Jerone Young <jyoung5@us.ibm.com> escreveu:
> 
> > Looking at your output..try booting Xen with command
> > line perameter
> > "acpi=off" and see what happens.
> > 		
> > 
> > On Thu, 2005-12-15 at 13:31 +0000, Randolph Oliveira
> > wrote:
> > > Hello!
> > > 
> > > I`m trying to boot a via sata machine with xen 3.0
> > > with no sucess. It just freezes at this point:
> > > 
> > > *********
> > > ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB]
> > ->
> > > GSI 10 (level,low) -> IRQ 10
> > > sata_via (0000:00:0f.0): routed to hard irq line
> > 10
> > > ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE
> > bmdma
> > > 0xEF90 irq 10
> > > ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA
> > bmdma
> > > 0xEF98 irq 10
> > > ata1: dev 0 ATA, max UDMA/133, 156301488 sectors:
> > > lba48
> > > *********
> > > 
> > > and then only a hard reset modifies this state.
> > the
> > > hard disc seems to be detected but i don`t have a
> > clue
> > > what`s going on. I`ve beeing running xen 2.0.7 on
> > this
> > > machine without any problems. Below is attached a
> > > lspci output:
> > > 
> > > lspci:
> > > 
> > > 0000:00:00.0 Host bridge: VIA Technologies, Inc.
> > > VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
> > > 0000:00:01.0 PCI bridge: VIA Technologies, Inc.
> > VT8237
> > > PCI Bridge
> > > 0000:00:0f.0 RAID bus controller: VIA
> > Technologies,
> > > Inc. VIA VT6420 SATA RAID Controller (rev 80)
> > > 0000:00:0f.1 IDE interface: VIA Technologies, Inc.
> > > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus
> > Master
> > > IDE (rev 06)
> > > 0000:00:10.0 USB Controller: VIA Technologies,
> > Inc.
> > > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > > 0000:00:10.1 USB Controller: VIA Technologies,
> > Inc.
> > > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > > 0000:00:10.2 USB Controller: VIA Technologies,
> > Inc.
> > > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > > 0000:00:10.3 USB Controller: VIA Technologies,
> > Inc.
> > > VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> > > 0000:00:10.4 USB Controller: VIA Technologies,
> > Inc.
> > > USB 2.0 (rev 86)
> > > 0000:00:11.0 ISA bridge: VIA Technologies, Inc.
> > VT8237
> > > ISA bridge [K8T800 South]
> > > 0000:00:11.5 Multimedia audio controller: VIA
> > > Technologies, Inc. VT8233/A/8235/8237 AC97 Audio
> > > Controller (rev 60)
> > > 0000:00:12.0 Ethernet controller: VIA
> > Technologies,
> > > Inc. VT6102 [Rhine-II] (rev 78)
> > > 0000:01:00.0 VGA compatible controller: nVidia
> > > Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev
> > c1)
> > > 
> > > Any help is appreciated!
> > > 
> > > Thanks,
> > > Randolph
> > > 
> > > 
> > > 	
> > > 
> > > 
> > > 
> > > 	
> > > 		
> > >
> >
> _______________________________________________________
> > 
> > > Yahoo! doce lar. Faça do Yahoo! sua homepage. 
> > > http://br.yahoo.com/homepageset.html 
> > > 
> > > 
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@lists.xensource.com
> > > http://lists.xensource.com/xen-users
> > > 
> > 
> > 
> 
> 
> 
> 	
> 
> 
> 	
> 		
> _______________________________________________________ 
> Yahoo! doce lar. Faça do Yahoo! sua homepage. 
> http://br.yahoo.com/homepageset.html 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
> 
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Possibly Parallel Threads

Search for more seemingly similar threads

Xen users - Dec 2005 - VIA sata + Xen 3.0 boot lockup problems

[Xen-users] VIA sata + Xen 3.0 boot lockup problems

Re: [Xen-users] VIA sata + Xen 3.0 boot lockup problems

Re: [Xen-users] VIA sata + Xen 3.0 boot lockup problems

RE: [Xen-users] VIA sata + Xen 3.0 boot lockup problems

Possibly Parallel Threads