Hi Ted, You know how it works: no pain, no gain! :-) I''ve installed the RPMs, but just to see how it goes on my machines. Regarding my grid and virtual machines project, I have a set of different models of HP Vectra workstations and HP NetServers E60/E800 (I guess I''m only allocating about four E60s to this test). These E60s are dual 550MHz with 1 GB of RAM. I''ll try to test the FC4 SMB guest and physical device swaps to see what happens, but I''m not sure what I will be looking for by allowing xend to bring the bridge up. Can you help me on that? Best Regards, -- =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ Felipe Franciosi +55-51-91230557 CPAD/HP/PUCRS - Centro de Pesquisa em Alto Desempenho http://www.cpad.pucrs.br/ ozzy@cpad.pucrs.br Porto Alegre, RS - Brazil =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ -----Mensagem original----- De: Ted Kaczmarek [mailto:tedkaz@optonline.net] Enviada em: quinta-feira, 29 de setembro de 2005 15:41 Para: Felipe Franciosi Assunto: Re: RES: [Xen-users] FC4 SMP domU ? Don''t use the FC4 rpms unless you want aggravation :-) I have FC4 and xen working very nicely, some minor quirks and some of which may be disk IO related. 1) I had to create bridge for eth1 with xend not running 2) Can''t get gentoo or debiam images to use physical device for swap 3) Can''t get FC4 SMP guest, am fairly certain I had this at one time :-) The other stuff is very minor, such as init 0''s not always terminating guest, bringing up domU occasionally fails etc. Use the unstable tar ball or the hg tree for best results. Regards, Ted _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users