Navid Khalili
2005-Aug-21 04:31 UTC
[Xen-users] Xen locks up when copying file over network...
Hi all, I have a Dell 2850 with xen 2.0.7 installed. The 2850 uses a PERC4/Di raid on motherboard, I have the current kernel modules compiled:> CONFIG_MEGARAID_NEWGEN > CONFIG_MEGARAID_MM > CONFIG_MEGARAID_MAILBOXWhen copying files over the network, the entire machine (dom0) hangs, no error message, nothing. Any suggestions? I can ssh into other machines fine, it seems to hang when both the NIC and the RAID are working together.... Thanks in advance, Navid Khalili _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Kip Macy
2005-Aug-21 05:30 UTC
Re: [Xen-users] Xen locks up when copying file over network...
This is a known problem on the 2850. My memory fails me at the moment
on the specifics but if I recall correctly disabling USB in the BIOS
fixes this. There was also a discussion in the archives on an IRQ
balancing patch which may not have been backported.
You will be best served by checking the archives.
-Kip
On 8/20/05, Navid Khalili <navid@guba.com> wrote:> Hi all,
>
> I have a Dell 2850 with xen 2.0.7 installed. The 2850 uses a
PERC4/Di
> raid on motherboard, I have the current kernel modules compiled:
>
> > CONFIG_MEGARAID_NEWGEN
> > CONFIG_MEGARAID_MM
> > CONFIG_MEGARAID_MAILBOX
>
>
>
> When copying files over the network, the entire machine (dom0)
hangs,
> no error message, nothing. Any suggestions? I can ssh into other
> machines fine, it seems to hang when both the NIC and the RAID are
> working together....
>
>
> Thanks in advance,
>
> Navid Khalili
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users