Hello I am using ASUS M6800NE notebook. There is integrated gigabit Broadcom network card. I started to play with 2.0.6 - there were problems with random hangs - probably due to missing ACPI but the network was running w/o problems. So i decided to move to Xen devel 3.0. Finaly the random hangs are away but I get into one new problem. The integrated network card is not working - neither with DHCP nor fixed address. Another interesting thing is that dom0 without Power management ACPI wont even boot. Next thing I tried was making the coresponding tg3 driver as module and then compiling original driver from Broadcom website - same result. With the normal 2.6.11 and 2.6.12 kernel is network working like a charm. Dmesg XEN: __ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ ''_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (root@(none)) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) Wed Jul 20 09:30:39 CEST 2005 Latest ChangeSet: (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003ff40000 (usable) (XEN) 000000003ff40000 - 000000003ff50000 (ACPI data) (XEN) 000000003ff50000 - 0000000040000000 (ACPI NVS) (XEN) System RAM: 1022MB (1047420kB) (XEN) Xen heap: 10MB (10748kB) (XEN) PAE disabled. (XEN) DMI 2.3 present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 ACPIAM ) @ 0x000f5df0 (XEN) ACPI: RSDT (v001 A M I OEMRSDT 0x03000528 MSFT 0x00000097) @ 0x3ff40000 (XEN) ACPI: FADT (v001 A M I OEMFACP 0x03000528 MSFT 0x00000097) @ 0x3ff40200 (XEN) ACPI: OEMB (v001 A M I OEMBIOS 0x03000528 MSFT 0x00000097) @ 0x3ff50040 (XEN) ACPI: DSDT (v001 1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000 (XEN) Found and enabled local APIC! (XEN) Initializing CPU#0 (XEN) Detected 600.032 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 2048K (XEN) CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06 (XEN) SMP motherboard not detected. (XEN) Time init: (XEN) .... cpu_freq: 00000000:23C3C6C0 (XEN) .... scale: 00000001:AAA4AAB4 (XEN) .... Wall Clock: 1121897482s 20000us (XEN) Brought up 1 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: ''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0 ,VIRT_BASE=0xC0000000,PAE=no,LOADER=generic'' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 08000000->10000000 (31232 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04f5ee4 (XEN) Init. ramdisk: c04f6000->c04f6000 (XEN) Phys-Mach map: c04f6000->c0534800 (XEN) Page tables: c0535000->c0538000 (XEN) Start info: c0538000->c0539000 (XEN) Boot stack: c0539000->c053a000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Scrubbing Free RAM: ...........done. (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen). Dmesg Dom0: Linux version 2.6.12-xen0 (root@asusnb) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #11 Wed Jul 20 16:09:50 CEST 2005 BIOS-provided physical RAM map: Xen: 0000000000100000 - 000000000fa00000 (usable) 0MB HIGHMEM available. 250MB LOWMEM available. On node 0 totalpages: 64000 DMA zone: 64000 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f5df0 ACPI: RSDT (v001 A M I OEMRSDT 0x03000528 MSFT 0x00000097) @ 0x3ff40000 ACPI: FADT (v001 A M I OEMFACP 0x03000528 MSFT 0x00000097) @ 0x3ff40200 ACPI: OEMB (v001 A M I OEMBIOS 0x03000528 MSFT 0x00000097) @ 0x3ff50040 ACPI: DSDT (v001 1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000 IRQ lockup detection disabled Allocating PCI resources starting at 0fa00000 (gap: 0fa00000:f0600000) Built 1 zonelists Kernel command line: root=/dev/hda6 Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Xen reported: 600.032 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) vmalloc area: d0800000-fb7fe000, maxmem 34000000 Memory: 248064k/256000k available (2757k kernel code, 6808k reserved, 921k data, 152k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1199.30 BogoMIPS (lpj=5996544) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9d3b1 00000000 00000000 00000040 00000180 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking ''hlt'' instruction... disabled ACPI: setting ELCR to 0200 (from 0c30) NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20050309 ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACS_] (Node c12406a0), AE_NOT_EXIST ACPI-1138: *** Error: Method execution failed [\_SB_.AC__._INI] (Node c1240140), AE_NOT_EXIST ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.BATS] (Node c1240700), AE_NOT_EXIST ACPI-1138: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node c1243420), AE_NOT_EXIST ACPI-0158: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node c1243420), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Enabled i801 SMBus device PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 28) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12) xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn''t work, try "pci=routeirq". If it helps, post a report PCI: IRQ init Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Grant table initialized Initializing Cryptographic API ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: Thermal Zone [THRM] (55 C) Asus Laptop ACPI Extras version 0.29 M6NE model detected, supported Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xe0000000 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered loop: loaded (max 8 devices) pcnet32.c:v1.30j 29.04.2005 tsbogend@alpha.franken.de tg3.c:v3.31 (June 8, 2005) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:d8:8b:fb:6a eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] PPP generic driver version 2.4.2 Xen virtual console successfully installed as ttyS0 Event-channel device installed. Blkif backend is using grant tables. Initialising Xen netif backend Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS548080M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: Host Protected Area detected. current capacity is 152119485 sectors (77885 MB) native capacity is 156301488 sectors (80026 MB) hda: Host Protected Area disabled. hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice Bluetooth: HCI USB driver ver 2.8 usbcore: registered new driver hci_usb Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 Failed to obtain physical IRQ 4 PCI: Setting latency timer of device 0000:00:1f.5 to 64 input: AT Translated Set 2 keyboard on isa0060/serio0 intel8x0_measure_ac97_clock: measured 48894 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with STAC9750,51 at 0xffaff800, irq 4 NET: Registered protocol family 2 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0 input: SynPS/2 Synaptics TouchPad on isa0060/serio4 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Freeing unused kernel memory: 152k freed Lspci -vv : 0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21) Subsystem: ASUSTeK Computer Inc.: Unknown device 186a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) Capabilities: [e4] #09 [4104] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ff800000-ff8fffff Prefetchable memory behind bridge: ce900000-de9fffff Expansion ROM at 0000d000 [disabled] [size=4K] BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1869 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at e800 [size=32] 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1869 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at e880 [size=32] 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1869 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 4: I/O ports at ec00 [size=32] 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1868 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 0: Memory at ffaffc00 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [2080] 0000:00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 Memory behind bridge: ff900000-ff9fffff Prefetchable memory behind bridge: dea00000-deafffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1869 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at 0fa00000 (32-bit, non-prefetchable) [size=1K] 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) Subsystem: ASUSTeK Computer Inc.: Unknown device 1869 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 0 Region 4: I/O ports at 0540 [size=32] 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC''97 Audio Controller (rev 03) Subsystem: ASUSTeK Computer Inc.: Unknown device 1713 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 4 Region 0: I/O ports at ee00 Region 1: I/O ports at e000 [size=64] Region 2: Memory at ffaff800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ffaff400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC''97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1826 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 4 Region 0: I/O ports at e400 Region 1: I/O ports at e080 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1772 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 10 Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=ff8c0000] Region 1: I/O ports at d800 [size=256] Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 00020000 [disabled] Capabilities: [58] AGP version 2.0 Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) Subsystem: ASUSTeK Computer Inc.: Unknown device 1735 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin A routed to IRQ 4 Region 0: Memory at ff9f0000 (32-bit, non-prefetchable) Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: feff7ffebdffeffc Data: ffff 0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) Subsystem: ASUSTeK Computer Inc.: Unknown device 1864 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at 0fa01000 (32-bit, non-prefetchable) [disabled] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 I/O window 0: 00000000-00000003 [disabled] I/O window 1: 00000000-00000003 [disabled] BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) Subsystem: ASUSTeK Computer Inc.: Unknown device 1864 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 255 Region 0: Memory at 0fa02000 (32-bit, non-prefetchable) Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 1867 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin C routed to IRQ 10 Region 0: Memory at ff9ef800 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 0000:02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) Subsystem: Intel Corp.: Unknown device 2701 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 6000ns max), cache line size 10 Interrupt: pin A routed to IRQ 4 Region 0: Memory at ff9ee000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Do you have any idea? koxman _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users