similar to: Link Properties text

Displaying 20 results from an estimated 600 matches similar to: "Link Properties text"

2007 Apr 17
2
IPv6 version specific classification in crossbow
Hi all, As part of IPv6 version specific classification support in crossbow we are introducing ip_version option in flowadm interface and associated classification functions. If ip_version option is not specified, but v4 or v6 address is passed as arg. to ip_addr option of flowadm cli that can also help to populate version specific bits in flow_mask to specify if policy (and flow entry
2008 Mar 19
14
dladm does not show create-etherstub option.
Hi All, I have bfu''ed to net-virt_xb-21_snv_81_021308. The dladm command on my machine does not have create-etherstub option. Please let me know what could be the issue. Thanks Khushal
2008 Feb 21
3
Reclaiming transmit descriptors by NIC drivers with Crossbow new scheduling
The following is mainly a capture of parts of multiple off-line discussions within members of the Crossbow team (Gopi, Thiru, Roamer, May-Lin, Thirumailai, Nitin, KB, ...), I thought I''d open it up to other participants. Crossbow''s core scheduling involves switching a NIC (or individual Rx rings on the NIC) to polling mode. The receive interrupt will become not only rarer,
2008 Jan 22
9
VNIC, non-global zone, dhcp & dns
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> <font size="-1"><font face="Bitstream Vera Sans"><br>     Hello,<br> <br>     I am trying to have dns <b>automatically</b> configured through
2006 Sep 25
4
Can''t create a virtual nic
Howdy, I just installed the crossbow snapshot from opensolaris.org, and bumped into an issue when attempting to create a virtual nic: $ dladm create-vnic -i 192.168.1.101 -d ni0 2 dladm: VNIC creation failed: No such file or directory (unknown diagnostic) When I truss the process, it looks like it''s failing when attempting to open the vnic pseudo-device: 100878/1:
2009 Jun 16
7
objects disappear from dladm after reboot
On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0
2009 Jan 12
11
dedicated vnic IP zone not recieving unicast traffic
Hi Folks, I have a snv_105 sxce host that I just can''t get to work as expected with crossbow + zones. My test host persephone, is a virtual machine running under VMware ESXi 3.5, with 2 virtual network cards (e1000), all on the same flat network/subnet. It started life just 2 days ago with a clean install of snv_95, and I LUed to 105 yesterday. To rule out any sharing issue, the first
2007 Sep 19
3
Solaris 10 Update 4 support for VNICs
I have a requirement in my current project to support multiple co-located zones on the same VLAN. Our current deployment OS is Solaris 10 Update 4. I''d like to use exclusive IP zones, but I gather the only way to currently have multiple exclusive zones with interfaces on the same VLAN is through the use of VNICs. From my initial look at S10u4, it seems VNIC support been not yet been
2009 Mar 12
4
dladm vnics and etherstub
redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #
2006 Oct 01
1
Crossbow and zones
Howdy, I just finished reading through the Crossbow presentation: http://blogs.sun.com/sunay/resource/crossbow.pdf And have one question. If you create a virtual NIC with dladm: $ dladm create-vnic -d bge0 -m 0:1:2:3:4:5 -b 10000 1 Can you then add vnic1 directly to the zone? e.g.: zonecfg -z zone1 zonecfg:zone1> create zonecfg:zone1> set zonepath=/zones/zone1 zonecfg:zone1> add net
2009 Jan 07
9
Crossbow integration with Solaris 10/08
Hi, >From what I have read, the create-vnic feature in dladm is only available within the context of crossbow...? Specifically, what I am wondering is whether it is at all possible to successfully install crossbow on top of Sun''s "Standard/sunsolve supported" Solaris 10/08 rather than OpenSolaris, per. Se.... Is this at all feasible? Many thanks in advance.. Best
2009 Feb 12
11
UV fastpath after Crossbow
Hi the Crossbow team, I am testing my UV fastpath bits and I found several issues that need your suggestion: 1. dladm show-usage won''t work if UV fastpath is enabled. Since the link usage data are collected based on the statistics of the mac_client_impl_t, and UV fastpath skips the GLDv3 processing, that won''t be available. I don''t see a solution for this except
2008 Oct 09
11
Crossbow Code Review Phase III ready
(networking-discuss Bcc''ed) Good morning, The Crossbow team would like to invite you to participate in the project''s third and last phase of code review. The third phase of the review starts today, and will last for two weeks. It covers the following parts of the code: VLANs Link Aggregations Xen mac_datapath_setup All drivers
2008 Jun 18
2
problems trying the "getting started" demo
I have installed on a VirtualBox vm the crossbow ISO Now I''m trying to create the network map described in the "getting started" pdf I have this situation: On global zone, I have the real NIC: e1000g0 with ip 10.0.2.15 (VirtualBox NAT this IP, I can get web access with it) I have created an etherstub (etherstub n?2) with 2 vnics (vnic5 and vnic6), I''ve plumbed
2009 Mar 31
9
Hwo to disable the polling function of mac_srs
In crossbow, each mac_srs has a kernel thread called "mac_rx_srs_poll_ring" to poll the hardware and crossbow will wakeup this thread to poll packets from the hardware automatically. Does crossbow provide any method to disable the polling mechanism, for example disabling the this kernel thread? Thanks Zhihui -------------- next part -------------- An HTML attachment was scrubbed... URL:
2009 Jan 10
3
ALOM woes
Hi. After running with the crossbow bits for a while, I discovered that the network management port on my T1000 wasn''t working properly (no link light). When logging in on the serial management port and running "resetsc", I got this: --->8--- ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED.
2006 Sep 29
8
creating a vnic to represent the factory MAC address
How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest
2007 Nov 20
1
Does crossbow check the duplicate MAC address?
Hi All, >From the design documents, I see there is an option "DLADM_VNIC_OPT_NODUPCHECK" for checking if the vnic MAC is unique on the same physical NIC. I have a question here. Does crossbow check if the MAC address is unique on the same subnet? E.g, create a vnic on hostA with hostB''s MAC address. Thanks, Karol
2009 Jan 21
1
snoop, vnics and ping.
So, just to play with vnics with 106, I have... e1000g2 plumb''d with 192.168.85.10 vnic0 is created on top of e1000g2 with 192.168.85.22 I snoop on e1000g2 to see the traffic. I ping 192.168.85.22 and it works. I stop the snoop on e1000g2. I ping 192.168.85.22 and it doesn''t work. I start the snoop on e1000g2. I ping 192.168.85.22 and ping works. Is this a new feature with
2007 Aug 28
20
Updated Crossbow virtualization architecture document
Folks, I just posted an updated Crossbow virtualization architecture document. The new revision is available at: http://opensolaris.org/os/project/crossbow/Docs/crossbow-virt.pdf The main changes are the addition of support for multiple MAC addresses per client, and an explicit separation between consolidation private and project private MAC API entry points. See in particular the