similar to: [HCL] <JAWAN> <JW-UPSLC02> supported by <blazer_usb>

Device manufacturer: JAWAN tech Name:JW-UPSLC02 [upsc output] battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13 battery.voltage.low: 10.4 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 5161

As per request by Arnaud in the users list Device manufacturer: Apollo Device name: 1085VC (Retailer's product page: http://shop.esquire.co.za/ProductDescription.aspx?id=583072) upsc on mains power: > $ upsc apollo > battery.voltage: 13.50 > battery.voltage.nominal: 12.0 > beeper.status: enabled > device.mfr: > device.model: > device.type: ups > driver.name:

Syndome Era Series *upsc output* * *battery.charge: 100 battery.runtime: 1000 <-- not reported by UPS (guesstimate) battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.idleload: 30 driver.parameter.pollinterval: 5

Hi, another UPS piece supported by blazer_usb: ALLSAI model LV 2K upsc output: battery.voltage: 82.08 battery.voltage.nominal: 72.0 beeper.status: enabled device.mfr: device.model: LV 2K device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 18.0 input.frequency: 59.9

Hello to all list members, I'm trying to make my UPS work with nut-2.2.2 (using Debian Testing, but compiled from source code) for a week ago, with not success. It's a Unitek Alpha 1000Ps, and I supossed it would work with megatec_usb driver, as other Unitek models. It has an USB interface, and when I plug it into my system I've got this message: chopito:/home/jordi# dmesg | tail

Hi Pawel, 2011/7/26 Pawel Sikora <pluto at agmk.net> > Hi, > > i have an orvaldi ups > http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 > and it works fine with blazer_usb driver. could you please add a new udev > rule? > > # ORVALDI 750/900SP - blazer_usb > ATTR{idVendor}=="0665", ATTR{idProduct}=="5161",

Hi Pawel, 2011/7/26 Pawel Sikora <pluto at agmk.net> > On Tuesday 26 of July 2011 14:33:15 you wrote: > > Hi Pawel, > > > > 2011/7/26 Pawel Sikora <pluto at agmk.net> > > > > > Hi, > > > > > > i have an orvaldi ups > > > http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 > > > and it works

hi, i've bought a 750VA orvaldi ups http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 which holds my hardware (wifi router, cable modem, quad-core with raid and lcd monitor) for ~15 minutes. pretty nice result for a cheap (~57 euro) home ups. in fact, the vendor software for linux is very old (e.g. requires ancient redhat with qt2), requires db9 port while shipped

Hi, I am using a ALLNET 91500 UPS with blazer_usb driver /usr/lib/ups/driver/blazer_usb -a ups91500 -L Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1) I have this settings: upsc ups91500 at localhost battery.charge: 100 battery.runtime: 12000 battery.voltage: 27.50 battery.voltage.high: 27.3 battery.voltage.low: 18.0 device.type: ups driver.flag.novendor: enabled driver.name:

Device manufacturer: Fideltronik INIGO Device name: Viper 1200 Device type: UPS Bus type: USB WWW: http://fideltronikinigo.com/viper/viper-1200/ " nut-scanner -U" output: [nutdev1] driver = "blazer_usb" port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor =

Lyonn CTB-1200 root at frambuesa:~# upsc lyonn at localhost battery.voltage: 27.20 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 213.3

Hello, I'm sorry if i'm not sending to the good email adress, please transfer this mail to the good one if necessary... I have tested and run the driver named "blazerd_usb" with differents products from the infosec company (tested on the following UPS : X2, X3, X4, E2, E3, E4) Is it possible to add the to the Hardware compatibility list ? Thank you, Regarde, Jeremy

Atlantis Land A03-P551(V1.2) battery.charge: 100 battery.voltage: 13.70 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter.langid_fix: 0x0409 driver.parameter.pollinterval: 2 driver.parameter.port: x driver.version: 2.6.4 driver.version.internal: 0.08 input.current.nominal: 0.0

On Sep 21, 2015, at 7:38 AM, Charles Lepple <clepple at gmail.com> wrote: > > (please keep the list CC'd) > >> On Sep 21, 2015, at 5:09 AM, Uro? Gaber <uros.gaber at gmail.com <mailto:uros.gaber at gmail.com>> wrote: >> >> Hi. >> No for me nutdrv_qx driver is not working with this UPS. >> Here's log: >> Sep 21 11:06:39

Hi, today I have tested the Zinto 800 with blazer_ser and blazer_usb on Citrix Server 7.0. Both works fine. upsc-Output (blazer_ser): battery.charge: 94 battery.voltage: 25.70 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.mfr: device.model: ZINTO 800 device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port:

Hi everybody, following UPS is successfuly tested. Model: FSP Champ Tower 1k https://www.fsp-europe.com/CS/champ-tower-series-1k2k3k/ lsusb: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial ups.conf: [powerpal]     driver = blazer_usb     port = /dev/hidraw0 Mode = standalone Distro = CentOS 8 What I did to get UPS communicate. In terminal run as root: ln -s

Device web page http://www.samurai-power.com/samurai-smart-1000-lcd UPS is marked as Micropower LCD 1000, but in Slovenia is remarked as Samurai LCD 1000 [ups] driver = blazer_usb port = auto vendorid = 0001 productid = 0000 upsc ups Init SSL without certificate database battery.charge: 100 battery.voltage: 27.40 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal:

Novex NUPS-650 USB information $ lsusb -s 002:027 -v Bus 002 Device 027: ID 0001:0000 Fry's Electronics Device Descriptor: ??bLength ???????????????18 ??bDescriptorType ????????1 ??bcdUSB ??????????????1.00 ??bDeviceClass ???????????0 (Defined at Interface level) ??bDeviceSubClass ????????0 ??bDeviceProtocol ????????0 ??bMaxPacketSize0 ????????8 ??idVendor ??????????0x0001 Fry's

UNITEK Alpha650ipF and Alpha650ipE Build NUT v2.6.4 from sources http://www.networkupstools.org/source/2.6/nut-2.6.4.tar.gz System: RedHat Linux RHEL4 Kernel: 2.6.9-42.0.10.EL (upsc) command output : battery.charge: 100 battery.voltage: 14.30 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: UNITEK device.model: Alph650ipF device.type: ups

Hi Team, I've been experimenting with getting the PowerShield Defender 1200VA UPS working and it appears to be supported by the blazer_usb driver, although it did not have the correct permissions within udev to load the driver as the non-root user after an RPM install on Fedora Core 16. [root at localhost ~]# lsusb ... Bus 006 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial